(Gah! Here's the post again in plaintext. Apologies.)
Hello all,
I'm running eigrpd in a VMWare environment and after upgrading to 7.5 from
7.4 I'm noticing eigrpd is failing with a couple different errors. In 7.4
and prior I never had any problems.
I tried to include everything that I thought might be relevant but if
there's any other information I can provide please let me know.
Has anyone else come across anything similar?
Thanks,
Mark
examples:
test1# eigrpd -dv
startup
eigrp_if_start: lo1 as 1 family ipv4
eigrp_if_start: em0 as 1 family ipv4
if_join_ipv4_group: interface em0 addr 224.0.0.10
rt_new: prefix aa.bb.cc.1/32
route_new: prefix aa.bb.cc.1/32 via connected distance (28160/0)
rt_new: prefix 198.18.101.0/24
route_new: prefix 198.18.101.0/24 via connected distance (28160/0)
fatal in eigrpe: send_packet: get hdr failed
rt_del: prefix aa.bb.cc.1/32
route_del: prefix aa.bb.cc.1/32 via connected
rt_del: prefix 198.18.101.0/24
route_del: prefix 198.18.101.0/24 via connected
route decision engine exiting
kernel routing table decoupled
waiting for children to terminate
terminating
and
RouterTest# eigrpd -dv
startup
eigrp_if_start: em1 as 1 family ipv4
if_join_ipv4_group: interface em1 addr 224.0.0.10
rt_new: prefix 198.18.101.0/24
route_new: prefix 198.18.101.0/24 via connected distance (28160/0)
rt_del: prefix 198.18.101.0/24
route_del: prefix 198.18.101.0/24 via connected
route decision engine exiting
kernel routing table decoupled
waiting for children to terminate
eigrp engine terminated; signal 11
terminating
This is happening on two of two upgraded VMs.
SHA256 (/usr/sbin/eigrpd) =
3b85d7ac155afe4edd355f8b1d8c81f77c6254d96410af8b22f4018b756282a6
(just in case)
I've tried with net.inet.tcp.tso=0 and net.inet.tcp.tso=1. Same result.
test1# uname -a
OpenBSD test1.local 7.5 GENERIC.MP#82 amd64
The configs I'm running are pretty basic:
RouterTest# eigrpd -n
configuration OK
RouterTest# eigrpd -nv
router-id 198.18.101.1
fib-update yes
rdomain 0
fib-priority-internal 28
fib-priority-external 28
fib-priority-summary 28
address-family ipv4 {
autonomous-system 1 {
k-values 1 0 1 0 0 0
active-timeout 3
maximum-hops 100
maximum-paths 4
variance 8
default-metric 100000 10 255 1 1500
interface em1 {
hello-interval 5
holdtime 15
delay 10
bandwidth 100000
split-horizon yes
}
}
}
address-family ipv6 {
}
