Hi,
After upgrade from 7.3 to 7.4 (on both boxes) the xterm session for this entry
in .fvwmrc (on monitor):
'Exec exec ssh -Y opendev xterm -title roger@opendev'
takes several seconds to deliver the xterm window, while I did not notice any
delay before upgrade.
For other usernames on opendev the .fvwmrc entry is like (without the '-X' for
most usernames other than grading):
'Exec exec xterm -title grading@opendev -e ssh -X grading@opendev'
and I do not notice any delay after upgrade compared with before upgrade.
Expressing the 'roger@opendev' entry as:
'Exec exec xterm -title roger@opendev -e ssh -Y roger@opendev'
fixes the delay problem, but was the delay a predictable consequence of some
change? Or perhaps the entry should never have been expressed in the way that
led to the delay?
Below are dmsesg and pkg_info for both boxes involved.
Roger
dmseg and pkg_info for 'monitor'
7.4 appears after second 'rebooting...' line.
Script started on Thu Oct 19 16:04:50 2023
monitor$ dmesg
OpenBSD 7.3 (GENERIC.MP) #1125: Sat Mar 25 10:36:29 MDT 2023
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 2056990720 (1961MB)
avail mem = 1975300096 (1883MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xe9f80 (85 entries)
bios0: vendor Hewlett-Packard version "786G1 v01.08" date 08/25/2008
bios0: Hewlett-Packard HP Compaq dc7900 Small Form Factor
acpi0 at bios0: ACPI 1.0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC ASF! MCFG TCPA SLIC HPET DMAR
acpi0: wakeup devices PCI0(S4) PEG1(S4) PEG2(S4) IGBE(S4) PCX1(S4) PCX2(S4)
PCX5(S4) PCX6(S4) HUB_(S4) USB1(S3) USB2(S3) USB3(S3) USB4(S3) USB5(S3)
USB6(S3) EUS1(S3) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz, 2992.53 MHz, 06-17-0a
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG,LAHF,PERF,SENSOR,MELTDOWN
cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 6MB 64b/line
24-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 332MHz
cpu0: mwait min=64, max=64, C-substates=0.2.2.2.2, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz, 2992.59 MHz, 06-17-0a
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG,LAHF,PERF,SENSOR,MELTDOWN
cpu1: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 6MB 64b/line
24-way L2 cache
cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins, remapped
acpimcfg0 at acpi0
acpimcfg0: addr 0xf4000000, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG1)
acpiprt2 at acpi0: bus -1 (PEG2)
acpiprt3 at acpi0: bus 32 (PCX1)
acpiprt4 at acpi0: bus -1 (PCX2)
acpiprt5 at acpi0: bus 48 (PCX5)
acpiprt6 at acpi0: bus -1 (PCX6)
acpiprt7 at acpi0: bus 7 (HUB_)
acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
acpicmos0 at acpi0
"PNP0003" at acpi0 not configured
tpm0 at acpi0 TPM_ 1.2 (TIS) addr 0x4e/0x2, device 0xffffffff rev 0xff
acpibtn0 at acpi0: PBTN
"PNP0C14" at acpi0 not configured
acpicpu0 at acpi0: !C2(500@17 mwait.3@0x10), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: !C2(500@17 mwait.3@0x10), C1(1000@1 mwait.1), PSS
cpu0: Enhanced SpeedStep 2992 MHz: speeds: 3000, 1998 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Q45 Host" rev 0x03
inteldrm0 at pci0 dev 2 function 0 "Intel Q45 Video" rev 0x03
drm0 at inteldrm0
intagp0 at inteldrm0
agp0 at intagp0: aperture at 0xe0000000, size 0x10000000
inteldrm0: apic 1 int 16, G45, gen 4
"Intel Q45 Video" rev 0x03 at pci0 dev 2 function 1 not configured
"Intel Q45 HECI" rev 0x03 at pci0 dev 3 function 0 not configured
pciide0 at pci0 dev 3 function 2 "Intel Q45 PT IDER" rev 0x03: DMA
(unsupported), channel 0 wired to native-PCI, channel 1 wired to native-PCI
pciide0: using apic 1 int 18 for native-PCI interrupt
pciide0: channel 0 ignored (not responding; disabled or no drives?)
pciide0: channel 1 ignored (not responding; disabled or no drives?)
puc0 at pci0 dev 3 function 3 "Intel Q45 KT" rev 0x03: ports: 16 com
com4 at puc0 port 0 apic 1 int 17: ns16550a, 16 byte fifo
com4: probed fifo depth: 15 bytes
em0 at pci0 dev 25 function 0 "Intel ICH10 D BM LM" rev 0x02: apic 1 int 19,
address 00:23:7d:20:19:d3
uhci0 at pci0 dev 26 function 0 "Intel 82801JD USB" rev 0x02: apic 1 int 20
uhci1 at pci0 dev 26 function 1 "Intel 82801JD USB" rev 0x02: apic 1 int 21
uhci2 at pci0 dev 26 function 2 "Intel 82801JD USB" rev 0x02: apic 1 int 22
ehci0 at pci0 dev 26 function 7 "Intel 82801JD USB" rev 0x02: apic 1 int 22
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
addr 1
ppb0 at pci0 dev 28 function 0 "Intel 82801JD PCIE" rev 0x02
pci1 at ppb0 bus 32
ppb1 at pci0 dev 28 function 4 "Intel 82801JD PCIE" rev 0x02: apic 1 int 20
pci2 at ppb1 bus 48
uhci3 at pci0 dev 29 function 0 "Intel 82801JD USB" rev 0x02: apic 1 int 20
uhci4 at pci0 dev 29 function 1 "Intel 82801JD USB" rev 0x02: apic 1 int 21
uhci5 at pci0 dev 29 function 2 "Intel 82801JD USB" rev 0x02: apic 1 int 22
ehci1 at pci0 dev 29 function 7 "Intel 82801JD USB" rev 0x02: apic 1 int 20
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
addr 1
ppb2 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xa2
pci3 at ppb2 bus 7
pcib0 at pci0 dev 31 function 0 "Intel 82801JDO LPC" rev 0x02
pciide1 at pci0 dev 31 function 2 "Intel 82801JD SATA" rev 0x02: DMA, channel 0
configured to native-PCI, channel 1 configured to native-PCI
pciide1: using apic 1 int 18 for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <SanDisk SDSSDP064G>
wd0: 1-sector PIO, LBA48, 60103MB, 123091920 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 6
wd1 at pciide1 channel 1 drive 0: <SanDisk SDSSDP064G>
wd1: 1-sector PIO, LBA48, 60103MB, 123091920 sectors
wd1(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 6
pciide2 at pci0 dev 31 function 5 "Intel 82801JD SATA" rev 0x02: DMA, channel 0
wired to native-PCI, channel 1 wired to native-PCI
pciide2: using apic 1 int 18 for native-PCI interrupt
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
uhidev0 at uhub7 port 1 configuration 1 interface 0 "Logitech USB Receiver" rev
2.00/12.03 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
uhidev1 at uhub7 port 1 configuration 1 interface 1 "Logitech USB Receiver" rev
2.00/12.03 addr 2
uhidev1: iclass 3/1, 8 report ids
ums0 at uhidev1 reportid 2: 16 buttons, Z and W dir
wsmouse0 at ums0 mux 0
ucc0 at uhidev1 reportid 3: 767 usages, 20 keys, array
wskbd2 at ucc0 mux 1
uhid0 at uhidev1 reportid 4: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 8: input=1, output=0, feature=0
uhidev2 at uhub7 port 1 configuration 1 interface 2 "Logitech USB Receiver" rev
2.00/12.03 addr 2
uhidev2: iclass 3/0, 33 report ids
uhidpp0 at uhidev2 device 1 keyboard "K360"
uhid2 at uhidev2 reportid 32: input=14, output=14, feature=0
uhid3 at uhidev2 reportid 33: input=31, output=31, feature=0
uhidev3 at uhub7 port 2 configuration 1 interface 0 "Logitech USB Receiver" rev
2.00/24.11 addr 3
uhidev3: iclass 3/1
ukbd1 at uhidev3: 8 variable keys, 6 key codes
wskbd3 at ukbd1 mux 1
uhidev4 at uhub7 port 2 configuration 1 interface 1 "Logitech USB Receiver" rev
2.00/24.11 addr 3
uhidev4: iclass 3/1, 8 report ids
ums1 at uhidev4 reportid 2: 16 buttons, Z and W dir
wsmouse1 at ums1 mux 0
ucc1 at uhidev4 reportid 3: 767 usages, 20 keys, array
wskbd4 at ucc1 mux 1
uhid4 at uhidev4 reportid 4: input=1, output=0, feature=0
uhid5 at uhidev4 reportid 8: input=1, output=0, feature=0
uhidev5 at uhub7 port 2 configuration 1 interface 2 "Logitech USB Receiver" rev
2.00/24.11 addr 3
uhidev5: iclass 3/0, 33 report ids
uhidpp1 at uhidev5 device 1 mouse "M570"
uhid6 at uhidev5 reportid 32: input=14, output=14, feature=0
uhid7 at uhidev5 reportid 33: input=31, output=31, feature=0
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
sd0 at scsibus2 targ 1 lun 0: <OPENBSD, SR RAID 1, 006>
sd0: 60102MB, 512 bytes/sector, 123089438 sectors
root on sd0a (cd051eb2b1148e1c.a) swap on sd0b dump on sd0b
WARNING: clock gained 3 days
WARNING: CHECK AND RESET THE DATE!
inteldrm0: 1920x1080, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
wskbd1: connecting to wsdisplay0
wskbd2: connecting to wsdisplay0
wskbd3: connecting to wsdisplay0
wskbd4: connecting to wsdisplay0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
syncing disks... done
rebooting...
OpenBSD 7.3 (GENERIC.MP) #1125: Sat Mar 25 10:36:29 MDT 2023
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 2056990720 (1961MB)
avail mem = 1975312384 (1883MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xe9f80 (85 entries)
bios0: vendor Hewlett-Packard version "786G1 v01.08" date 08/25/2008
bios0: Hewlett-Packard HP Compaq dc7900 Small Form Factor
acpi0 at bios0: ACPI 1.0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC ASF! MCFG TCPA SLIC HPET DMAR
acpi0: wakeup devices PCI0(S4) PEG1(S4) PEG2(S4) IGBE(S4) PCX1(S4) PCX2(S4)
PCX5(S4) PCX6(S4) HUB_(S4) USB1(S3) USB2(S3) USB3(S3) USB4(S3) USB5(S3)
USB6(S3) EUS1(S3) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz, 2992.56 MHz, 06-17-0a
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG,LAHF,PERF,SENSOR,MELTDOWN
cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 6MB 64b/line
24-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 332MHz
cpu0: mwait min=64, max=64, C-substates=0.2.2.2.2, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz, 2992.61 MHz, 06-17-0a
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG,LAHF,PERF,SENSOR,MELTDOWN
cpu1: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 6MB 64b/line
24-way L2 cache
cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins, remapped
acpimcfg0 at acpi0
acpimcfg0: addr 0xf4000000, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG1)
acpiprt2 at acpi0: bus -1 (PEG2)
acpiprt3 at acpi0: bus 32 (PCX1)
acpiprt4 at acpi0: bus -1 (PCX2)
acpiprt5 at acpi0: bus 48 (PCX5)
acpiprt6 at acpi0: bus -1 (PCX6)
acpiprt7 at acpi0: bus 7 (HUB_)
acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
acpicmos0 at acpi0
"PNP0003" at acpi0 not configured
tpm0 at acpi0 TPM_ 1.2 (TIS) addr 0x4e/0x2, device 0xffffffff rev 0xff
acpibtn0 at acpi0: PBTN
"PNP0C14" at acpi0 not configured
acpicpu0 at acpi0: !C2(500@17 mwait.3@0x10), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: !C2(500@17 mwait.3@0x10), C1(1000@1 mwait.1), PSS
cpu0: Enhanced SpeedStep 2992 MHz: speeds: 3000, 1998 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Q45 Host" rev 0x03
inteldrm0 at pci0 dev 2 function 0 "Intel Q45 Video" rev 0x03
drm0 at inteldrm0
intagp0 at inteldrm0
agp0 at intagp0: aperture at 0xe0000000, size 0x10000000
inteldrm0: apic 1 int 16, G45, gen 4
"Intel Q45 Video" rev 0x03 at pci0 dev 2 function 1 not configured
"Intel Q45 HECI" rev 0x03 at pci0 dev 3 function 0 not configured
pciide0 at pci0 dev 3 function 2 "Intel Q45 PT IDER" rev 0x03: DMA
(unsupported), channel 0 wired to native-PCI, channel 1 wired to native-PCI
pciide0: using apic 1 int 18 for native-PCI interrupt
pciide0: channel 0 ignored (not responding; disabled or no drives?)
pciide0: channel 1 ignored (not responding; disabled or no drives?)
puc0 at pci0 dev 3 function 3 "Intel Q45 KT" rev 0x03: ports: 16 com
com4 at puc0 port 0 apic 1 int 17: ns16550a, 16 byte fifo
com4: probed fifo depth: 0 bytes
em0 at pci0 dev 25 function 0 "Intel ICH10 D BM LM" rev 0x02: apic 1 int 19,
address 00:23:7d:20:19:d3
uhci0 at pci0 dev 26 function 0 "Intel 82801JD USB" rev 0x02: apic 1 int 20
uhci1 at pci0 dev 26 function 1 "Intel 82801JD USB" rev 0x02: apic 1 int 21
uhci2 at pci0 dev 26 function 2 "Intel 82801JD USB" rev 0x02: apic 1 int 22
ehci0 at pci0 dev 26 function 7 "Intel 82801JD USB" rev 0x02: apic 1 int 22
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
addr 1
ppb0 at pci0 dev 28 function 0 "Intel 82801JD PCIE" rev 0x02
pci1 at ppb0 bus 32
ppb1 at pci0 dev 28 function 4 "Intel 82801JD PCIE" rev 0x02: apic 1 int 20
pci2 at ppb1 bus 48
uhci3 at pci0 dev 29 function 0 "Intel 82801JD USB" rev 0x02: apic 1 int 20
uhci4 at pci0 dev 29 function 1 "Intel 82801JD USB" rev 0x02: apic 1 int 21
uhci5 at pci0 dev 29 function 2 "Intel 82801JD USB" rev 0x02: apic 1 int 22
ehci1 at pci0 dev 29 function 7 "Intel 82801JD USB" rev 0x02: apic 1 int 20
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
addr 1
ppb2 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xa2
pci3 at ppb2 bus 7
pcib0 at pci0 dev 31 function 0 "Intel 82801JDO LPC" rev 0x02
pciide1 at pci0 dev 31 function 2 "Intel 82801JD SATA" rev 0x02: DMA, channel 0
configured to native-PCI, channel 1 configured to native-PCI
pciide1: using apic 1 int 18 for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <SanDisk SDSSDP064G>
wd0: 1-sector PIO, LBA48, 60103MB, 123091920 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 6
wd1 at pciide1 channel 1 drive 0: <SanDisk SDSSDP064G>
wd1: 1-sector PIO, LBA48, 60103MB, 123091920 sectors
wd1(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 6
pciide2 at pci0 dev 31 function 5 "Intel 82801JD SATA" rev 0x02: DMA, channel 0
wired to native-PCI, channel 1 wired to native-PCI
pciide2: using apic 1 int 18 for native-PCI interrupt
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
uhidev0 at uhub7 port 1 configuration 1 interface 0 "Logitech USB Receiver" rev
2.00/12.03 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
uhidev1 at uhub7 port 1 configuration 1 interface 1 "Logitech USB Receiver" rev
2.00/12.03 addr 2
uhidev1: iclass 3/1, 8 report ids
ums0 at uhidev1 reportid 2: 16 buttons, Z and W dir
wsmouse0 at ums0 mux 0
ucc0 at uhidev1 reportid 3: 767 usages, 20 keys, array
wskbd2 at ucc0 mux 1
uhid0 at uhidev1 reportid 4: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 8: input=1, output=0, feature=0
uhidev2 at uhub7 port 1 configuration 1 interface 2 "Logitech USB Receiver" rev
2.00/12.03 addr 2
uhidev2: iclass 3/0, 33 report ids
uhidpp0 at uhidev2 device 1 keyboard "K360"
uhid2 at uhidev2 reportid 32: input=14, output=14, feature=0
uhid3 at uhidev2 reportid 33: input=31, output=31, feature=0
uhidev3 at uhub7 port 2 configuration 1 interface 0 "Logitech USB Receiver" rev
2.00/24.11 addr 3
uhidev3: iclass 3/1
ukbd1 at uhidev3: 8 variable keys, 6 key codes
wskbd3 at ukbd1 mux 1
uhidev4 at uhub7 port 2 configuration 1 interface 1 "Logitech USB Receiver" rev
2.00/24.11 addr 3
uhidev4: iclass 3/1, 8 report ids
ums1 at uhidev4 reportid 2: 16 buttons, Z and W dir
wsmouse1 at ums1 mux 0
ucc1 at uhidev4 reportid 3: 767 usages, 20 keys, array
wskbd4 at ucc1 mux 1
uhid4 at uhidev4 reportid 4: input=1, output=0, feature=0
uhid5 at uhidev4 reportid 8: input=1, output=0, feature=0
uhidev5 at uhub7 port 2 configuration 1 interface 2 "Logitech USB Receiver" rev
2.00/24.11 addr 3
uhidev5: iclass 3/0, 33 report ids
uhidpp1 at uhidev5 device 1 mouse "M570"
uhid6 at uhidev5 reportid 32: input=14, output=14, feature=0
uhid7 at uhidev5 reportid 33: input=31, output=31, feature=0
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
sd0 at scsibus2 targ 1 lun 0: <OPENBSD, SR RAID 1, 006>
sd0: 60102MB, 512 bytes/sector, 123089438 sectors
root on sd0a (cd051eb2b1148e1c.a) swap on sd0b dump on sd0b
inteldrm0: 1920x1080, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
wskbd1: connecting to wsdisplay0
wskbd2: connecting to wsdisplay0
wskbd3: connecting to wsdisplay0
wskbd4: connecting to wsdisplay0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
drm:pid81431:intel_pipe_update_start *ERROR* [drm] *ERROR* Potential atomic
update failure on pipe A
syncing disks... done
rebooting...
OpenBSD 7.4 (RAMDISK_CD) #1322: Tue Oct 10 09:07:38 MDT 2023
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
real mem = 2056990720 (1961MB)
avail mem = 1990692864 (1898MB)
random: good seed from bootblocks
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xe9f80 (85 entries)
bios0: vendor Hewlett-Packard version "786G1 v01.08" date 08/25/2008
bios0: Hewlett-Packard HP Compaq dc7900 Small Form Factor
acpi0 at bios0: ACPI 1.0
acpi0: tables DSDT FACP APIC ASF! MCFG TCPA SLIC HPET DMAR
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz, 2992.85 MHz, 06-17-0a, patch
00000a07
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG,LAHF,PERF,SENSOR,MELTDOWN
cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 6MB 64b/line
24-way L2 cache
cpu0: apic clock running at 332MHz
cpu0: mwait min=64, max=64, C-substates=0.2.2.2.2, IBE
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins, remapped
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG1)
acpiprt2 at acpi0: bus -1 (PEG2)
acpiprt3 at acpi0: bus 32 (PCX1)
acpiprt4 at acpi0: bus -1 (PCX2)
acpiprt5 at acpi0: bus 48 (PCX5)
acpiprt6 at acpi0: bus -1 (PCX6)
acpiprt7 at acpi0: bus 7 (HUB_)
acpipci0 at acpi0 PCI0copyvalue: 81a06870: 0x00000000 0x00000011 0x00000001
acpicmos0 at acpi0
"PNP0003" at acpi0 not configured
"IFX0102" at acpi0 not configured
"PNP0C0C" at acpi0 not configured
"PNP0C14" at acpi0 not configured
acpicpu at acpi0 not configured
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Q45 Host" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel Q45 Video" rev 0x03
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
"Intel Q45 Video" rev 0x03 at pci0 dev 2 function 1 not configured
"Intel Q45 HECI" rev 0x03 at pci0 dev 3 function 0 not configured
pciide0 at pci0 dev 3 function 2 "Intel Q45 PT IDER" rev 0x03: DMA
(unsupported), channel 0 wired to native-PCI, channel 1 wired to native-PCI
pciide0: using apic 1 int 18 for native-PCI interrupt
pciide0: channel 0 ignored (not responding; disabled or no drives?)
pciide0: channel 1 ignored (not responding; disabled or no drives?)
"Intel Q45 KT" rev 0x03 at pci0 dev 3 function 3 not configured
em0 at pci0 dev 25 function 0 "Intel ICH10 D BM LM" rev 0x02: apic 1 int 19,
address 00:23:7d:20:19:d3
uhci0 at pci0 dev 26 function 0 "Intel 82801JD USB" rev 0x02: apic 1 int 20
uhci1 at pci0 dev 26 function 1 "Intel 82801JD USB" rev 0x02: apic 1 int 21
uhci2 at pci0 dev 26 function 2 "Intel 82801JD USB" rev 0x02: apic 1 int 22
ehci0 at pci0 dev 26 function 7 "Intel 82801JD USB" rev 0x02: apic 1 int 22
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
addr 1
ppb0 at pci0 dev 28 function 0 "Intel 82801JD PCIE" rev 0x02
pci1 at ppb0 bus 32
ppb1 at pci0 dev 28 function 4 "Intel 82801JD PCIE" rev 0x02: apic 1 int 20
pci2 at ppb1 bus 48
uhci3 at pci0 dev 29 function 0 "Intel 82801JD USB" rev 0x02: apic 1 int 20
uhci4 at pci0 dev 29 function 1 "Intel 82801JD USB" rev 0x02: apic 1 int 21
uhci5 at pci0 dev 29 function 2 "Intel 82801JD USB" rev 0x02: apic 1 int 22
ehci1 at pci0 dev 29 function 7 "Intel 82801JD USB" rev 0x02: apic 1 int 20
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
addr 1
ppb2 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xa2
pci3 at ppb2 bus 7
"Intel 82801JDO LPC" rev 0x02 at pci0 dev 31 function 0 not configured
pciide1 at pci0 dev 31 function 2 "Intel 82801JD SATA" rev 0x02: DMA, channel 0
configured to native-PCI, channel 1 configured to native-PCI
pciide1: using apic 1 int 18 for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <SanDisk SDSSDP064G>
wd0: 1-sector PIO, LBA48, 60103MB, 123091920 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 6
wd1 at pciide1 channel 1 drive 0: <SanDisk SDSSDP064G>
wd1: 1-sector PIO, LBA48, 60103MB, 123091920 sectors
wd1(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 6
pciide2 at pci0 dev 31 function 5 "Intel 82801JD SATA" rev 0x02: DMA, channel 0
wired to native-PCI, channel 1 wired to native-PCI
pciide2: using apic 1 int 18 for native-PCI interrupt
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
isa0 at mainbus0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
uhidev0 at uhub7 port 1 configuration 1 interface 0 "Logitech USB Receiver" rev
2.00/12.03 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub7 port 1 configuration 1 interface 1 "Logitech USB Receiver" rev
2.00/12.03 addr 2
uhidev1: iclass 3/1, 8 report ids
uhid at uhidev1 reportid 2 not configured
uhid at uhidev1 reportid 3 not configured
uhid at uhidev1 reportid 4 not configured
uhid at uhidev1 reportid 8 not configured
uhidev2 at uhub7 port 1 configuration 1 interface 2 "Logitech USB Receiver" rev
2.00/12.03 addr 2
uhidev2: iclass 3/0, 33 report ids
uhid at uhidev2 reportid 16 not configured
uhid at uhidev2 reportid 17 not configured
uhid at uhidev2 reportid 32 not configured
uhid at uhidev2 reportid 33 not configured
uhidev3 at uhub7 port 2 configuration 1 interface 0 "Logitech USB Receiver" rev
2.00/24.11 addr 3
uhidev3: iclass 3/1
ukbd1 at uhidev3
wskbd2 at ukbd1 mux 1
wskbd2: connecting to wsdisplay0
uhidev4 at uhub7 port 2 configuration 1 interface 1 "Logitech USB Receiver" rev
2.00/24.11 addr 3
uhidev4: iclass 3/1, 8 report ids
uhid at uhidev4 reportid 2 not configured
uhid at uhidev4 reportid 3 not configured
uhid at uhidev4 reportid 4 not configured
uhid at uhidev4 reportid 8 not configured
uhidev5 at uhub7 port 2 configuration 1 interface 2 "Logitech USB Receiver" rev
2.00/24.11 addr 3
uhidev5: iclass 3/0, 33 report ids
uhid at uhidev5 reportid 16 not configured
uhid at uhidev5 reportid 17 not configured
uhid at uhidev5 reportid 32 not configured
uhid at uhidev5 reportid 33 not configured
softraid0 at root
scsibus0 at softraid0: 256 targets
sd0 at scsibus0 targ 1 lun 0: <OPENBSD, SR RAID 1, 006>
sd0: 60102MB, 512 bytes/sector, 123089438 sectors
root on rd0a swap on rd0b dump on rd0b
WARNING: CHECK AND RESET THE DATE!
syncing disks...
OpenBSD 7.4 (GENERIC.MP) #1397: Tue Oct 10 09:02:37 MDT 2023
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 2056990720 (1961MB)
avail mem = 1974992896 (1883MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xe9f80 (85 entries)
bios0: vendor Hewlett-Packard version "786G1 v01.08" date 08/25/2008
bios0: Hewlett-Packard HP Compaq dc7900 Small Form Factor
acpi0 at bios0: ACPI 1.0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC ASF! MCFG TCPA SLIC HPET DMAR
acpi0: wakeup devices PCI0(S4) PEG1(S4) PEG2(S4) IGBE(S4) PCX1(S4) PCX2(S4)
PCX5(S4) PCX6(S4) HUB_(S4) USB1(S3) USB2(S3) USB3(S3) USB4(S3) USB5(S3)
USB6(S3) EUS1(S3) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz, 2992.55 MHz, 06-17-0a, patch
00000a0b
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG,LAHF,PERF,SENSOR,MELTDOWN
cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 6MB 64b/line
24-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 332MHz
cpu0: mwait min=64, max=64, C-substates=0.2.2.2.2, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz, 2992.59 MHz, 06-17-0a, patch
00000a0b
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG,LAHF,PERF,SENSOR,MELTDOWN
cpu1: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 6MB 64b/line
24-way L2 cache
cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins, remapped
acpimcfg0 at acpi0
acpimcfg0: addr 0xf4000000, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG1)
acpiprt2 at acpi0: bus -1 (PEG2)
acpiprt3 at acpi0: bus 32 (PCX1)
acpiprt4 at acpi0: bus -1 (PCX2)
acpiprt5 at acpi0: bus 48 (PCX5)
acpiprt6 at acpi0: bus -1 (PCX6)
acpiprt7 at acpi0: bus 7 (HUB_)
acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
acpicmos0 at acpi0
"PNP0003" at acpi0 not configured
tpm0 at acpi0 TPM_ 1.2 (TIS) addr 0x4e/0x2, device 0xffffffff rev 0xff
acpibtn0 at acpi0: PBTN(wakeup)
"PNP0C14" at acpi0 not configured
acpicpu0 at acpi0: !C2(500@17 mwait.3@0x10), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: !C2(500@17 mwait.3@0x10), C1(1000@1 mwait.1), PSS
cpu0: Enhanced SpeedStep 2992 MHz: speeds: 3000, 1998 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Q45 Host" rev 0x03
inteldrm0 at pci0 dev 2 function 0 "Intel Q45 Video" rev 0x03
drm0 at inteldrm0
intagp0 at inteldrm0
agp0 at intagp0: aperture at 0xe0000000, size 0x10000000
inteldrm0: apic 1 int 16, G45, gen 4
"Intel Q45 Video" rev 0x03 at pci0 dev 2 function 1 not configured
"Intel Q45 HECI" rev 0x03 at pci0 dev 3 function 0 not configured
pciide0 at pci0 dev 3 function 2 "Intel Q45 PT IDER" rev 0x03: DMA
(unsupported), channel 0 wired to native-PCI, channel 1 wired to native-PCI
pciide0: using apic 1 int 18 for native-PCI interrupt
pciide0: channel 0 ignored (not responding; disabled or no drives?)
pciide0: channel 1 ignored (not responding; disabled or no drives?)
puc0 at pci0 dev 3 function 3 "Intel Q45 KT" rev 0x03: ports: 16 com
com4 at puc0 port 0 apic 1 int 17: ns16550a, 16 byte fifo
com4: probed fifo depth: 0 bytes
em0 at pci0 dev 25 function 0 "Intel ICH10 D BM LM" rev 0x02: apic 1 int 19,
address 00:23:7d:20:19:d3
uhci0 at pci0 dev 26 function 0 "Intel 82801JD USB" rev 0x02: apic 1 int 20
uhci1 at pci0 dev 26 function 1 "Intel 82801JD USB" rev 0x02: apic 1 int 21
uhci2 at pci0 dev 26 function 2 "Intel 82801JD USB" rev 0x02: apic 1 int 22
ehci0 at pci0 dev 26 function 7 "Intel 82801JD USB" rev 0x02: apic 1 int 22
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
addr 1
ppb0 at pci0 dev 28 function 0 "Intel 82801JD PCIE" rev 0x02
pci1 at ppb0 bus 32
ppb1 at pci0 dev 28 function 4 "Intel 82801JD PCIE" rev 0x02: apic 1 int 20
pci2 at ppb1 bus 48
uhci3 at pci0 dev 29 function 0 "Intel 82801JD USB" rev 0x02: apic 1 int 20
uhci4 at pci0 dev 29 function 1 "Intel 82801JD USB" rev 0x02: apic 1 int 21
uhci5 at pci0 dev 29 function 2 "Intel 82801JD USB" rev 0x02: apic 1 int 22
ehci1 at pci0 dev 29 function 7 "Intel 82801JD USB" rev 0x02: apic 1 int 20
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
addr 1
ppb2 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xa2
pci3 at ppb2 bus 7
pcib0 at pci0 dev 31 function 0 "Intel 82801JDO LPC" rev 0x02
pciide1 at pci0 dev 31 function 2 "Intel 82801JD SATA" rev 0x02: DMA, channel 0
configured to native-PCI, channel 1 configured to native-PCI
pciide1: using apic 1 int 18 for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <SanDisk SDSSDP064G>
wd0: 1-sector PIO, LBA48, 60103MB, 123091920 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 6
wd1 at pciide1 channel 1 drive 0: <SanDisk SDSSDP064G>
wd1: 1-sector PIO, LBA48, 60103MB, 123091920 sectors
wd1(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 6
pciide2 at pci0 dev 31 function 5 "Intel 82801JD SATA" rev 0x02: DMA, channel 0
wired to native-PCI, channel 1 wired to native-PCI
pciide2: using apic 1 int 18 for native-PCI interrupt
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
uhidev0 at uhub7 port 1 configuration 1 interface 0 "Logitech USB Receiver" rev
2.00/12.03 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
uhidev1 at uhub7 port 1 configuration 1 interface 1 "Logitech USB Receiver" rev
2.00/12.03 addr 2
uhidev1: iclass 3/1, 8 report ids
ums0 at uhidev1 reportid 2: 16 buttons, Z and W dir
wsmouse0 at ums0 mux 0
ucc0 at uhidev1 reportid 3: 767 usages, 20 keys, array
wskbd2 at ucc0 mux 1
uhid0 at uhidev1 reportid 4: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 8: input=1, output=0, feature=0
uhidev2 at uhub7 port 1 configuration 1 interface 2 "Logitech USB Receiver" rev
2.00/12.03 addr 2
uhidev2: iclass 3/0, 33 report ids
uhidpp0 at uhidev2 device 1 keyboard "K360"
uhid2 at uhidev2 reportid 32: input=14, output=14, feature=0
uhid3 at uhidev2 reportid 33: input=31, output=31, feature=0
uhidev3 at uhub7 port 2 configuration 1 interface 0 "Logitech USB Receiver" rev
2.00/24.11 addr 3
uhidev3: iclass 3/1
ukbd1 at uhidev3: 8 variable keys, 6 key codes
wskbd3 at ukbd1 mux 1
uhidev4 at uhub7 port 2 configuration 1 interface 1 "Logitech USB Receiver" rev
2.00/24.11 addr 3
uhidev4: iclass 3/1, 8 report ids
ums1 at uhidev4 reportid 2: 16 buttons, Z and W dir
wsmouse1 at ums1 mux 0
ucc1 at uhidev4 reportid 3: 767 usages, 20 keys, array
wskbd4 at ucc1 mux 1
uhid4 at uhidev4 reportid 4: input=1, output=0, feature=0
uhid5 at uhidev4 reportid 8: input=1, output=0, feature=0
uhidev5 at uhub7 port 2 configuration 1 interface 2 "Logitech USB Receiver" rev
2.00/24.11 addr 3
uhidev5: iclass 3/0, 33 report ids
uhidpp1 at uhidev5 device 1 mouse "M570"
uhid6 at uhidev5 reportid 32: input=14, output=14, feature=0
uhid7 at uhidev5 reportid 33: input=31, output=31, feature=0
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
sd0 at scsibus2 targ 1 lun 0: <OPENBSD, SR RAID 1, 006>
sd0: 60102MB, 512 bytes/sector, 123089438 sectors
root on sd0a (cd051eb2b1148e1c.a) swap on sd0b dump on sd0b
inteldrm0: 1920x1080, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
wskbd1: connecting to wsdisplay0
wskbd2: connecting to wsdisplay0
wskbd3: connecting to wsdisplay0
wskbd4: connecting to wsdisplay0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
monitor$
monitor$
monitor$ pkg_info
intel-firmware-20230808v0 microcode update binaries for Intel CPUs
inteldrm-firmware-20230919 firmware binary images for inteldrm(4) driver
monitor$
monitor$
monitor$ exit
Script done on Thu Oct 19 16:05:16 2023
dmseg and pkg_info for 'opendev'
7.4 appears after first 'rebooting...' line.
Script started on Thu Oct 19 16:06:31 2023
opendev$ dmesg
OpenBSD 7.3 (GENERIC.MP) #1125: Sat Mar 25 10:36:29 MDT 2023
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 17028485120 (16239MB)
avail mem = 16493006848 (15728MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xe9fb0 (80 entries)
bios0: vendor Hewlett-Packard version "786G2 v02.03" date 10/19/2015
bios0: Hewlett-Packard HP Compaq 6000 Pro SFF PC
acpi0 at bios0: ACPI 1.0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC ASF! MCFG TCPA SLIC HPET
acpi0: wakeup devices PCI0(S4) COM1(S4) PEG1(S4) PEG2(S4) IGBE(S4) PCX1(S4)
PCX2(S4) PCX5(S4) PCX6(S4) HUB_(S4) USB1(S3) USB2(S3) USB3(S3) USB4(S3)
USB5(S3) USB6(S3) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM)2 Duo CPU E7500 @ 2.93GHz, 2926.07 MHz, 06-17-0a
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG,LAHF,PERF,SENSOR,MELTDOWN
cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 3MB 64b/line
12-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 7 var ranges, 88 fixed ranges
cpu0: apic clock running at 266MHz
cpu0: mwait min=64, max=64, C-substates=0.2.2.2.2, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 Duo CPU E7500 @ 2.93GHz, 2926.11 MHz, 06-17-0a
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG,LAHF,PERF,SENSOR,MELTDOWN
cpu1: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 3MB 64b/line
12-way L2 cache
cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins, remapped
acpimcfg0 at acpi0
acpimcfg0: addr 0xf4000000, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG1)
acpiprt2 at acpi0: bus -1 (PEG2)
acpiprt3 at acpi0: bus 32 (PCX1)
acpiprt4 at acpi0: bus 48 (PCX2)
acpiprt5 at acpi0: bus -1 (PCX5)
acpiprt6 at acpi0: bus -1 (PCX6)
acpiprt7 at acpi0: bus 16 (HUB_)
acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
acpicmos0 at acpi0
com0 at acpi0 COM1 addr 0x3f8/0x8 irq 4: ns16550a, 16 byte fifo
"PNP0003" at acpi0 not configured
tpm0 at acpi0 TPM_ 1.2 (TIS) addr 0x4e/0x2, device 0xffffffff rev 0xff
acpibtn0 at acpi0: PBTN
"PNP0C14" at acpi0 not configured
acpicpu0 at acpi0: !C3(100@50 mwait.1@0x30), !C2(500@17 mwait.1@0x10),
C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: !C3(100@50 mwait.1@0x30), !C2(500@17 mwait.1@0x10),
C1(1000@1 mwait.1), PSS
cpu0: Enhanced SpeedStep 2926 MHz: speeds: 2933, 2128, 1596 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Q45 Host" rev 0x03
inteldrm0 at pci0 dev 2 function 0 "Intel Q45 Video" rev 0x03
drm0 at inteldrm0
intagp0 at inteldrm0
agp0 at intagp0: aperture at 0xe0000000, size 0x10000000
inteldrm0: apic 1 int 16, G45, gen 4
"Intel Q45 Video" rev 0x03 at pci0 dev 2 function 1 not configured
"Intel Q45 HECI" rev 0x03 at pci0 dev 3 function 0 not configured
puc0 at pci0 dev 3 function 3 "Intel Q45 KT" rev 0x03: ports: 16 com
com4 at puc0 port 0 apic 1 int 17: ns16550a, 16 byte fifo
com4: probed fifo depth: 15 bytes
em0 at pci0 dev 25 function 0 "Intel ICH10 D BM LM" rev 0x02: apic 1 int 19,
address 78:e3:b5:ca:fa:e3
uhci0 at pci0 dev 26 function 0 "Intel 82801JD USB" rev 0x02: apic 1 int 20
uhci1 at pci0 dev 26 function 1 "Intel 82801JD USB" rev 0x02: apic 1 int 21
uhci2 at pci0 dev 26 function 2 "Intel 82801JD USB" rev 0x02: apic 1 int 22
ehci0 at pci0 dev 26 function 7 "Intel 82801JD USB" rev 0x02: apic 1 int 22
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801JD HD Audio" rev 0x02: apic 1 int
21
azalia0: codecs: Realtek ALC662
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801JD PCIE" rev 0x02
pci1 at ppb0 bus 32
ppb1 at pci0 dev 28 function 1 "Intel 82801JD PCIE" rev 0x02: apic 1 int 21
pci2 at ppb1 bus 48
uhci3 at pci0 dev 29 function 0 "Intel 82801JD USB" rev 0x02: apic 1 int 20
uhci4 at pci0 dev 29 function 1 "Intel 82801JD USB" rev 0x02: apic 1 int 21
uhci5 at pci0 dev 29 function 2 "Intel 82801JD USB" rev 0x02: apic 1 int 22
ehci1 at pci0 dev 29 function 7 "Intel 82801JD USB" rev 0x02: apic 1 int 20
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
addr 1
ppb2 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xa2
pci3 at ppb2 bus 16
pcib0 at pci0 dev 31 function 0 "Intel 82801JD LPC" rev 0x02
ahci0 at pci0 dev 31 function 2 "Intel 82801JD AHCI" rev 0x02: apic 1 int 18,
AHCI 1.2
ahci0: port 0: 3.0Gb/s
ahci0: port 1: 3.0Gb/s
ahci0: port 2: 3.0Gb/s
ahci0: port 3: 3.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, KINGSTON SA400S3, S3E0> naa.50026b778495498a
sd0: 114473MB, 512 bytes/sector, 234441648 sectors, thin
sd1 at scsibus1 targ 1 lun 0: <ATA, KINGSTON SA400S3, S3E0> naa.50026b7784986b90
sd1: 114473MB, 512 bytes/sector, 234441648 sectors, thin
sd2 at scsibus1 targ 2 lun 0: <ATA, CT240BX500SSD1, M6CR> naa.500a0751e6400397
sd2: 228936MB, 512 bytes/sector, 468862128 sectors, thin
sd3 at scsibus1 targ 3 lun 0: <ATA, CT240BX500SSD1, M6CR> naa.500a0751e64003a7
sd3: 228936MB, 512 bytes/sector, 468862128 sectors, thin
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
softraid0: sd4 was not shutdown properly
sd4 at scsibus3 targ 1 lun 0: <OPENBSD, SR RAID 1, 006>
sd4: 114473MB, 512 bytes/sector, 234441056 sectors
softraid0: sd5 was not shutdown properly
sd5 at scsibus3 targ 2 lun 0: <OPENBSD, SR RAID 1, 006>
sd5: 228936MB, 512 bytes/sector, 468861536 sectors
root on sd4a (e1e37bd2277d58fa.a) swap on sd4b dump on sd4b
WARNING: / was not properly unmounted
WARNING: clock gained 7 days
WARNING: CHECK AND RESET THE DATE!
inteldrm0: 1024x768, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
syncing disks... done
rebooting...
OpenBSD 7.4 (RAMDISK_CD) #1322: Tue Oct 10 09:07:38 MDT 2023
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
real mem = 17028485120 (16239MB)
avail mem = 16508391424 (15743MB)
random: good seed from bootblocks
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xe9fb0 (80 entries)
bios0: vendor Hewlett-Packard version "786G2 v02.03" date 10/19/2015
bios0: Hewlett-Packard HP Compaq 6000 Pro SFF PC
acpi0 at bios0: ACPI 1.0
acpi0: tables DSDT FACP APIC ASF! MCFG TCPA SLIC HPET
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM)2 Duo CPU E7500 @ 2.93GHz, 2926.45 MHz, 06-17-0a, patch
00000a0e
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG,LAHF,PERF,SENSOR,MELTDOWN
cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 3MB 64b/line
12-way L2 cache
cpu0: apic clock running at 266MHz
cpu0: mwait min=64, max=64, C-substates=0.2.2.2.2, IBE
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins, remapped
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG1)
acpiprt2 at acpi0: bus -1 (PEG2)
acpiprt3 at acpi0: bus 32 (PCX1)
acpiprt4 at acpi0: bus 48 (PCX2)
acpiprt5 at acpi0: bus -1 (PCX5)
acpiprt6 at acpi0: bus -1 (PCX6)
acpiprt7 at acpi0: bus 16 (HUB_)
acpipci0 at acpi0 PCI0copyvalue: 81a06870: 0x00000000 0x00000011 0x00000001
acpicmos0 at acpi0
com0 at acpi0 COM1 addr 0x3f8/0x8 irq 4: ns16550a, 16 byte fifo
"PNP0003" at acpi0 not configured
"IFX0102" at acpi0 not configured
"PNP0C0C" at acpi0 not configured
"PNP0C14" at acpi0 not configured
acpicpu at acpi0 not configured
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Q45 Host" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel Q45 Video" rev 0x03
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
"Intel Q45 Video" rev 0x03 at pci0 dev 2 function 1 not configured
"Intel Q45 HECI" rev 0x03 at pci0 dev 3 function 0 not configured
"Intel Q45 KT" rev 0x03 at pci0 dev 3 function 3 not configured
em0 at pci0 dev 25 function 0 "Intel ICH10 D BM LM" rev 0x02: apic 1 int 19,
address 78:e3:b5:ca:fa:e3
uhci0 at pci0 dev 26 function 0 "Intel 82801JD USB" rev 0x02: apic 1 int 20
uhci1 at pci0 dev 26 function 1 "Intel 82801JD USB" rev 0x02: apic 1 int 21
uhci2 at pci0 dev 26 function 2 "Intel 82801JD USB" rev 0x02: apic 1 int 22
ehci0 at pci0 dev 26 function 7 "Intel 82801JD USB" rev 0x02: apic 1 int 22
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
addr 1
"Intel 82801JD HD Audio" rev 0x02 at pci0 dev 27 function 0 not configured
ppb0 at pci0 dev 28 function 0 "Intel 82801JD PCIE" rev 0x02
pci1 at ppb0 bus 32
ppb1 at pci0 dev 28 function 1 "Intel 82801JD PCIE" rev 0x02: apic 1 int 21
pci2 at ppb1 bus 48
uhci3 at pci0 dev 29 function 0 "Intel 82801JD USB" rev 0x02: apic 1 int 20
uhci4 at pci0 dev 29 function 1 "Intel 82801JD USB" rev 0x02: apic 1 int 21
uhci5 at pci0 dev 29 function 2 "Intel 82801JD USB" rev 0x02: apic 1 int 22
ehci1 at pci0 dev 29 function 7 "Intel 82801JD USB" rev 0x02: apic 1 int 20
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
addr 1
ppb2 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xa2
pci3 at ppb2 bus 16
"Intel 82801JD LPC" rev 0x02 at pci0 dev 31 function 0 not configured
ahci0 at pci0 dev 31 function 2 "Intel 82801JD AHCI" rev 0x02: apic 1 int 18,
AHCI 1.2
ahci0: port 0: 3.0Gb/s
ahci0: port 1: 3.0Gb/s
ahci0: port 2: 3.0Gb/s
ahci0: port 3: 3.0Gb/s
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, KINGSTON SA400S3, S3E0> naa.50026b778495498a
sd0: 114473MB, 512 bytes/sector, 234441648 sectors, thin
sd1 at scsibus0 targ 1 lun 0: <ATA, KINGSTON SA400S3, S3E0> naa.50026b7784986b90
sd1: 114473MB, 512 bytes/sector, 234441648 sectors, thin
sd2 at scsibus0 targ 2 lun 0: <ATA, CT240BX500SSD1, M6CR> naa.500a0751e6400397
sd2: 228936MB, 512 bytes/sector, 468862128 sectors, thin
sd3 at scsibus0 targ 3 lun 0: <ATA, CT240BX500SSD1, M6CR> naa.500a0751e64003a7
sd3: 228936MB, 512 bytes/sector, 468862128 sectors, thin
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
isa0 at mainbus0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
softraid0 at root
scsibus1 at softraid0: 256 targets
sd4 at scsibus1 targ 1 lun 0: <OPENBSD, SR RAID 1, 006>
sd4: 114473MB, 512 bytes/sector, 234441056 sectors
sd5 at scsibus1 targ 2 lun 0: <OPENBSD, SR RAID 1, 006>
sd5: 228936MB, 512 bytes/sector, 468861536 sectors
root on rd0a swap on rd0b dump on rd0b
WARNING: CHECK AND RESET THE DATE!
syncing disks...
OpenBSD 7.4 (GENERIC.MP) #1397: Tue Oct 10 09:02:37 MDT 2023
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 17028485120 (16239MB)
avail mem = 16492691456 (15728MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xe9fb0 (80 entries)
bios0: vendor Hewlett-Packard version "786G2 v02.03" date 10/19/2015
bios0: Hewlett-Packard HP Compaq 6000 Pro SFF PC
acpi0 at bios0: ACPI 1.0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC ASF! MCFG TCPA SLIC HPET
acpi0: wakeup devices PCI0(S4) COM1(S4) PEG1(S4) PEG2(S4) IGBE(S4) PCX1(S4)
PCX2(S4) PCX5(S4) PCX6(S4) HUB_(S4) USB1(S3) USB2(S3) USB3(S3) USB4(S3)
USB5(S3) USB6(S3) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM)2 Duo CPU E7500 @ 2.93GHz, 2926.07 MHz, 06-17-0a, patch
00000a0e
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG,LAHF,PERF,SENSOR,MELTDOWN
cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 3MB 64b/line
12-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 7 var ranges, 88 fixed ranges
cpu0: apic clock running at 266MHz
cpu0: mwait min=64, max=64, C-substates=0.2.2.2.2, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 Duo CPU E7500 @ 2.93GHz, 2926.12 MHz, 06-17-0a, patch
00000a0e
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG,LAHF,PERF,SENSOR,MELTDOWN
cpu1: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 3MB 64b/line
12-way L2 cache
cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins, remapped
acpimcfg0 at acpi0
acpimcfg0: addr 0xf4000000, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG1)
acpiprt2 at acpi0: bus -1 (PEG2)
acpiprt3 at acpi0: bus 32 (PCX1)
acpiprt4 at acpi0: bus 48 (PCX2)
acpiprt5 at acpi0: bus -1 (PCX5)
acpiprt6 at acpi0: bus -1 (PCX6)
acpiprt7 at acpi0: bus 16 (HUB_)
acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
acpicmos0 at acpi0
com0 at acpi0 COM1 addr 0x3f8/0x8 irq 4: ns16550a, 16 byte fifo
"PNP0003" at acpi0 not configured
tpm0 at acpi0 TPM_ 1.2 (TIS) addr 0x4e/0x2, device 0xffffffff rev 0xff
acpibtn0 at acpi0: PBTN(wakeup)
"PNP0C14" at acpi0 not configured
acpicpu0 at acpi0: !C3(100@50 mwait.1@0x30), !C2(500@17 mwait.1@0x10),
C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: !C3(100@50 mwait.1@0x30), !C2(500@17 mwait.1@0x10),
C1(1000@1 mwait.1), PSS
cpu0: Enhanced SpeedStep 2926 MHz: speeds: 2933, 2128, 1596 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Q45 Host" rev 0x03
inteldrm0 at pci0 dev 2 function 0 "Intel Q45 Video" rev 0x03
drm0 at inteldrm0
intagp0 at inteldrm0
agp0 at intagp0: aperture at 0xe0000000, size 0x10000000
inteldrm0: apic 1 int 16, G45, gen 4
"Intel Q45 Video" rev 0x03 at pci0 dev 2 function 1 not configured
"Intel Q45 HECI" rev 0x03 at pci0 dev 3 function 0 not configured
puc0 at pci0 dev 3 function 3 "Intel Q45 KT" rev 0x03: ports: 16 com
com4 at puc0 port 0 apic 1 int 17: ns16550a, 16 byte fifo
com4: probed fifo depth: 0 bytes
em0 at pci0 dev 25 function 0 "Intel ICH10 D BM LM" rev 0x02: apic 1 int 19,
address 78:e3:b5:ca:fa:e3
uhci0 at pci0 dev 26 function 0 "Intel 82801JD USB" rev 0x02: apic 1 int 20
uhci1 at pci0 dev 26 function 1 "Intel 82801JD USB" rev 0x02: apic 1 int 21
uhci2 at pci0 dev 26 function 2 "Intel 82801JD USB" rev 0x02: apic 1 int 22
ehci0 at pci0 dev 26 function 7 "Intel 82801JD USB" rev 0x02: apic 1 int 22
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801JD HD Audio" rev 0x02: apic 1 int
21
azalia0: codecs: Realtek ALC662
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801JD PCIE" rev 0x02
pci1 at ppb0 bus 32
ppb1 at pci0 dev 28 function 1 "Intel 82801JD PCIE" rev 0x02: apic 1 int 21
pci2 at ppb1 bus 48
uhci3 at pci0 dev 29 function 0 "Intel 82801JD USB" rev 0x02: apic 1 int 20
uhci4 at pci0 dev 29 function 1 "Intel 82801JD USB" rev 0x02: apic 1 int 21
uhci5 at pci0 dev 29 function 2 "Intel 82801JD USB" rev 0x02: apic 1 int 22
ehci1 at pci0 dev 29 function 7 "Intel 82801JD USB" rev 0x02: apic 1 int 20
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
addr 1
ppb2 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xa2
pci3 at ppb2 bus 16
pcib0 at pci0 dev 31 function 0 "Intel 82801JD LPC" rev 0x02
ahci0 at pci0 dev 31 function 2 "Intel 82801JD AHCI" rev 0x02: apic 1 int 18,
AHCI 1.2
ahci0: port 0: 3.0Gb/s
ahci0: port 1: 3.0Gb/s
ahci0: port 2: 3.0Gb/s
ahci0: port 3: 3.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, KINGSTON SA400S3, S3E0> naa.50026b778495498a
sd0: 114473MB, 512 bytes/sector, 234441648 sectors, thin
sd1 at scsibus1 targ 1 lun 0: <ATA, KINGSTON SA400S3, S3E0> naa.50026b7784986b90
sd1: 114473MB, 512 bytes/sector, 234441648 sectors, thin
sd2 at scsibus1 targ 2 lun 0: <ATA, CT240BX500SSD1, M6CR> naa.500a0751e6400397
sd2: 228936MB, 512 bytes/sector, 468862128 sectors, thin
sd3 at scsibus1 targ 3 lun 0: <ATA, CT240BX500SSD1, M6CR> naa.500a0751e64003a7
sd3: 228936MB, 512 bytes/sector, 468862128 sectors, thin
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
sd4 at scsibus3 targ 1 lun 0: <OPENBSD, SR RAID 1, 006>
sd4: 114473MB, 512 bytes/sector, 234441056 sectors
sd5 at scsibus3 targ 2 lun 0: <OPENBSD, SR RAID 1, 006>
sd5: 228936MB, 512 bytes/sector, 468861536 sectors
root on sd4a (e1e37bd2277d58fa.a) swap on sd4b dump on sd4b
inteldrm0: 1024x768, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
syncing disks... done
rebooting...
OpenBSD 7.4 (GENERIC.MP) #1397: Tue Oct 10 09:02:37 MDT 2023
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 17028485120 (16239MB)
avail mem = 16492691456 (15728MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xe9fb0 (80 entries)
bios0: vendor Hewlett-Packard version "786G2 v02.03" date 10/19/2015
bios0: Hewlett-Packard HP Compaq 6000 Pro SFF PC
acpi0 at bios0: ACPI 1.0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC ASF! MCFG TCPA SLIC HPET
acpi0: wakeup devices PCI0(S4) COM1(S4) PEG1(S4) PEG2(S4) IGBE(S4) PCX1(S4)
PCX2(S4) PCX5(S4) PCX6(S4) HUB_(S4) USB1(S3) USB2(S3) USB3(S3) USB4(S3)
USB5(S3) USB6(S3) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM)2 Duo CPU E7500 @ 2.93GHz, 2926.05 MHz, 06-17-0a, patch
00000a0e
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG,LAHF,PERF,SENSOR,MELTDOWN
cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 3MB 64b/line
12-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 7 var ranges, 88 fixed ranges
cpu0: apic clock running at 266MHz
cpu0: mwait min=64, max=64, C-substates=0.2.2.2.2, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 Duo CPU E7500 @ 2.93GHz, 2926.13 MHz, 06-17-0a, patch
00000a0e
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG,LAHF,PERF,SENSOR,MELTDOWN
cpu1: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 3MB 64b/line
12-way L2 cache
cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins, remapped
acpimcfg0 at acpi0
acpimcfg0: addr 0xf4000000, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG1)
acpiprt2 at acpi0: bus -1 (PEG2)
acpiprt3 at acpi0: bus 32 (PCX1)
acpiprt4 at acpi0: bus 48 (PCX2)
acpiprt5 at acpi0: bus -1 (PCX5)
acpiprt6 at acpi0: bus -1 (PCX6)
acpiprt7 at acpi0: bus 16 (HUB_)
acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
acpicmos0 at acpi0
com0 at acpi0 COM1 addr 0x3f8/0x8 irq 4: ns16550a, 16 byte fifo
"PNP0003" at acpi0 not configured
tpm0 at acpi0 TPM_ 1.2 (TIS) addr 0x4e/0x2, device 0xffffffff rev 0xff
acpibtn0 at acpi0: PBTN(wakeup)
"PNP0C14" at acpi0 not configured
acpicpu0 at acpi0: !C3(100@50 mwait.1@0x30), !C2(500@17 mwait.1@0x10),
C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: !C3(100@50 mwait.1@0x30), !C2(500@17 mwait.1@0x10),
C1(1000@1 mwait.1), PSS
cpu0: Enhanced SpeedStep 2926 MHz: speeds: 2933, 2128, 1596 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Q45 Host" rev 0x03
inteldrm0 at pci0 dev 2 function 0 "Intel Q45 Video" rev 0x03
drm0 at inteldrm0
intagp0 at inteldrm0
agp0 at intagp0: aperture at 0xe0000000, size 0x10000000
inteldrm0: apic 1 int 16, G45, gen 4
"Intel Q45 Video" rev 0x03 at pci0 dev 2 function 1 not configured
"Intel Q45 HECI" rev 0x03 at pci0 dev 3 function 0 not configured
puc0 at pci0 dev 3 function 3 "Intel Q45 KT" rev 0x03: ports: 16 com
com4 at puc0 port 0 apic 1 int 17: ns16550a, 16 byte fifo
com4: probed fifo depth: 0 bytes
em0 at pci0 dev 25 function 0 "Intel ICH10 D BM LM" rev 0x02: apic 1 int 19,
address 78:e3:b5:ca:fa:e3
uhci0 at pci0 dev 26 function 0 "Intel 82801JD USB" rev 0x02: apic 1 int 20
uhci1 at pci0 dev 26 function 1 "Intel 82801JD USB" rev 0x02: apic 1 int 21
uhci2 at pci0 dev 26 function 2 "Intel 82801JD USB" rev 0x02: apic 1 int 22
ehci0 at pci0 dev 26 function 7 "Intel 82801JD USB" rev 0x02: apic 1 int 22
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801JD HD Audio" rev 0x02: apic 1 int
21
azalia0: codecs: Realtek ALC662
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801JD PCIE" rev 0x02
pci1 at ppb0 bus 32
ppb1 at pci0 dev 28 function 1 "Intel 82801JD PCIE" rev 0x02: apic 1 int 21
pci2 at ppb1 bus 48
uhci3 at pci0 dev 29 function 0 "Intel 82801JD USB" rev 0x02: apic 1 int 20
uhci4 at pci0 dev 29 function 1 "Intel 82801JD USB" rev 0x02: apic 1 int 21
uhci5 at pci0 dev 29 function 2 "Intel 82801JD USB" rev 0x02: apic 1 int 22
ehci1 at pci0 dev 29 function 7 "Intel 82801JD USB" rev 0x02: apic 1 int 20
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
addr 1
ppb2 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xa2
pci3 at ppb2 bus 16
pcib0 at pci0 dev 31 function 0 "Intel 82801JD LPC" rev 0x02
ahci0 at pci0 dev 31 function 2 "Intel 82801JD AHCI" rev 0x02: apic 1 int 18,
AHCI 1.2
ahci0: port 0: 3.0Gb/s
ahci0: port 1: 3.0Gb/s
ahci0: port 2: 3.0Gb/s
ahci0: port 3: 3.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, KINGSTON SA400S3, S3E0> naa.50026b778495498a
sd0: 114473MB, 512 bytes/sector, 234441648 sectors, thin
sd1 at scsibus1 targ 1 lun 0: <ATA, KINGSTON SA400S3, S3E0> naa.50026b7784986b90
sd1: 114473MB, 512 bytes/sector, 234441648 sectors, thin
sd2 at scsibus1 targ 2 lun 0: <ATA, CT240BX500SSD1, M6CR> naa.500a0751e6400397
sd2: 228936MB, 512 bytes/sector, 468862128 sectors, thin
sd3 at scsibus1 targ 3 lun 0: <ATA, CT240BX500SSD1, M6CR> naa.500a0751e64003a7
sd3: 228936MB, 512 bytes/sector, 468862128 sectors, thin
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
sd4 at scsibus3 targ 1 lun 0: <OPENBSD, SR RAID 1, 006>
sd4: 114473MB, 512 bytes/sector, 234441056 sectors
sd5 at scsibus3 targ 2 lun 0: <OPENBSD, SR RAID 1, 006>
sd5: 228936MB, 512 bytes/sector, 468861536 sectors
root on sd4a (e1e37bd2277d58fa.a) swap on sd4b dump on sd4b
inteldrm0: 1024x768, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
chrome[86341]: pledge "inet", syscall 97
chrome[45147]: pledge "inet", syscall 97
chrome[61459]: pledge "inet", syscall 97
chrome[45130]: pledge "inet", syscall 97
chrome[7835]: pledge "inet", syscall 97
chrome[55501]: pledge "inet", syscall 97
opendev$
opendev$
opendev$ pkg_info
adwaita-icon-theme-44.0p0 base icon theme for GNOME
antiword-0.37p0 converts MSWord Documents to ASCII Text and PostScript
aom-3.6.1 Alliance for Open Media AV1 video codec
apl-fonts-1.0p0 Adrian Smith's standard APL fonts
apr-1.7.2 Apache Portable Runtime
apr-util-1.6.3 companion library to APR
aspell-0.60.8 spell checker with multi-language support
at-spi2-core-2.48.4 service interface for assistive technologies
autoconf-2.71 automatically configure source code on many Un*x platforms
avahi-glib-0.8p2 GLib and GObject integration libraries for avahi
avahi-libs-0.8p3 libraries and common data files for avahi
boost-1.80.0p2v0 free peer-reviewed portable C++ source libraries
brotli-1.0.9p0 generic lossless compressor
bzip2-1.0.8p0 block-sorting file compressor, unencumbered
cairo-1.17.8p0 vector graphics library
cdparanoia-3.a9.8p5 CDDA reading utility with extra data verification features
cdrtools-3.00p2 ISO 9660 filesystem and CD/DVD/BD creation tools
chromium-117.0.5938.149 Chromium browser
claws-mail-4.1.1p1 mail and news client
claws-mail-pdfviewer-4.1.1p1 pdfviewer plugin
clucene-core-2.3.3.4p4 full-text search engine library
cups-libs-2.4.7 CUPS libraries and headers
curl-8.4.0 transfer files with FTP, HTTP, HTTPS, etc.
cvsps-2.1p2 generate patchsets from CVS repositories
cyrus-sasl-2.1.28 RFC 2222 SASL (Simple Authentication and Security Layer)
dav1d-1.2.1p1 small and fast AV1 decoder
db-4.6.21p7v0 Berkeley DB package, revision 4
db-tcl-4.6.21p4v0 TCL bindings for Berkeley DB, revision 4
dbus-1.14.10v0 message bus system
dbus-daemon-launch-helper-1.14.10 DBus setuid helper for starting system
services
dbus-glib-0.112p1v0 glib bindings for dbus message system
dconf-0.40.0p0 configuration backend system
desktop-file-utils-0.26 utilities for dot.desktop entries
duktape-2.7.0p1 embeddable JavaScript engine
dvd+rw-tools-7.1p1 mastering tools for DVD+RW/+R/-R/-RW
e2fsprogs-1.46.2p0 utilities to manipulate ext2 filesystems
ee-1.5.2p2v0 easy to use text editor
enchant-1.6.1p4 generic spell checking library
enchant2-2.6.1 generic spell checking library
epoll-shim-0.0.20220703 small epoll implementation using kqueue
evince-44.3-light GNOME document viewer
flac-1.4.3 free lossless audio codec
fribidi-1.0.13 library implementing the Unicode Bidirectional Algorithm
gcr-3.41.1p2 library for bits of crypto UI and parsing
gdbm-1.23 GNU dbm
gdk-pixbuf-2.42.10 image data transformation library
geoclue2-2.7.1 modular geoinformation service on top of D-Bus
gettext-runtime-0.22.2 GNU gettext runtime libraries and programs
ghostscript-10.02.0 PostScript and PDF interpreter
ghostscript-fonts-8.11p3 35 standard PostScript fonts with Adobe name aliases
giflib-5.2.1 tools and library routines for working with GIF images
git-2.42.0 distributed version control system
gitwrapper-0.93 invoke an appropriate Git repository server
glew-2.2.0 GL Extension Wrangler library
glib2-2.76.5 general-purpose utility library
glib2-networking-2.76.1 network-related gio modules for GLib
glm-0.9.9.8 C++ mathematics header-only library for OpenGL software
gmake-4.4.1 GNU make
gmp-6.3.0 library for arbitrary precision arithmetic
gnuchess-6.2.9 chess program
gnumeric-1.12.55p0 spreadsheet application for GNOME
gnupg-2.4.3p1 GNU privacy guard - a free PGP replacement
gnutls-3.8.1 GNU Transport Layer Security library
gobject-introspection-1.76.1 GObject Introspection
goffice-0.10.55 document centric objects and utilities
gpgme-1.22.0 GnuPG Made Easy
graphene-1.10.8 thin layer of graphic data types
graphite2-1.3.14 rendering for complex writing systems
gsettings-desktop-schemas-44.0 collection of shared GSettings schemas
gspell-1.12.2 spell-checking library for GTK+
gstreamer1-1.22.6 framework for streaming media
gstreamer1-plugins-bad-1.22.6 bad elements for GStreamer
gstreamer1-plugins-base-1.22.6 base elements for GStreamer
gstreamer1-plugins-good-1.22.6 good elements for GStreamer
gtk+3-3.24.38 multi-platform graphical toolkit
gtk+3-cups-3.24.38 gtk+3 CUPS print backend
gtk4-update-icon-cache-4.12.3 gtk+ icon theme caching utility
gumbo-0.12.0 HTML5 parsing library in pure C99
gvfs-1.50.6 GNOME Virtual File System
harfbuzz-8.2.1 text shaping library
harfbuzz-icu-8.2.1 ICU support for libharfbuzz
hicolor-icon-theme-0.17 fallback theme of the icon theme specification
highway-1.0.3p0 length-agnostic SIMD with runtime dispatch
hubbub-0.3.7 HTML parser
hunspell-1.7.2 spelling, stemming, morphological analysis and generation
hyphen-2.8.8 text hyphenation library
icu4c-73.2p0v0 International Components for Unicode
ijs-0.35p3 raster image transmission library
intel-firmware-20230808v0 microcode update binaries for Intel CPUs
inteldrm-firmware-20230919 firmware binary images for inteldrm(4) driver
iso-codes-4.15.0 lists of the country, language and currency iso names
itcl-3.4.1p2v0 object-oriented extensions to Tcl
itk-3.3p5 build mega-widgets using the Itcl object system
jbig2dec-0.19 decoder for JBIG2 monochrome hi-res image compression format
jpeg-2.1.5.1v0 SIMD-accelerated JPEG codec replacement of libjpeg
json-glib-1.6.6p1 JSON parser for GLib-based libraries and applications
lame-3.100p1 lame ain't an MP3 encoder
lcms2-2.15 color management library
libarchive-3.7.2 multi-format archive and compression library
libass-0.17.1 portable ASS/SSA subtitle renderer
libassuan-2.5.5 IPC library used by GnuPG and gpgme
libavif-0.11.1p0 library for encoding and decoding .avif files
libb2-0.98.1v0 library providing BLAKE2b, BLAKE2s, BLAKE2bp, BLAKE2sp
libbs2b-3.1.0p4 Bauer stereophonic-to-binaural DSP
libcanberra-0.30p6 implementation of the Freedesktop sound theme spec.
libcanberra-gtk3-0.30p12 gtk+3 helper for libcanberra
libcss-0.9.1 CSS parser and selection engine
libdom-0.4.1 W3C DOM implementation
libetpan-1.9.4 mail purpose library
libevent-2.1.12p0 event notification library
libexif-0.6.24 extract digital camera info tags from JPEG images
libffi-3.4.4 Foreign Function Interface
libgcrypt-1.10.2p0 crypto library based on code used in GnuPG
libgpg-error-1.47 error codes for GnuPG related software
libgsf-1.14.50p2 GNOME Structured File library
libhandy-1.8.2 building blocks for modern adaptive GNOME apps
libical-3.0.16 implementation of the iCalendar protocols and data units
libiconv-1.17 character set conversion library
libidn-1.41p0 internationalized string handling
libidn2-2.3.0p0 implementation of IDNA2008 internationalized domain names
libjxl-0.8.2 JPEG XL image format reference implementation
libksba-1.6.4 X.509 library
libltdl-2.4.2p2 GNU libtool system independent dlopen wrapper
libnettle-3.9.1 cryptographic library
libnotify-0.8.2 send desktop notifications to a notification daemon
libnsbmp-0.1.6 BMP/ICO decoding library
libnsgif-0.2.1p0 GIF decoding library
libnslog-0.1.3 netsurf logging library
libnspsl-0.1.6p0 public suffix list library for netsurf
libnsutils-0.1.0 miscellaneous internal functions for netsurf
libogg-1.3.5 Ogg bitstream library
libpaper-2.1.1 library for handling paper characteristics
libparserutils-0.2.4p0 utility library for parser building
libproxy-0.5.3p0 library for automatic proxy configuration management
libpsl-0.21.1 public suffix list library
libreoffice-7.6.2.1v0 multi-platform productivity suite
librevenge-0.0.5 base library for writing document import filters
librsvg-2.56.4 SAX-based render library for SVG files
libsecret-0.21.1 library for storing and retrieving passwords and secrets
libshout-2.4.5 library for communicating with an icecast server
libsndfile-1.2.0 library to handle various audio file formats
libsoup-2.74.3p0 HTTP client/server library for GNOME
libsoup3-3.4.3 HTTP client/server library for GNOME
libspectre-0.2.12 library for rendering Postscript documents
libstemmer-2.2.0 stemming algorithms for text processing
libtasn1-4.19.0 Abstract Syntax Notation One structure parser library
libtheora-1.2.20190601p0 open video codec
libunbound-1.18.0 validating DNS resolver library
libunibreak-5.1 implementation of the line and word breaking
libunistring-0.9.7 manipulate Unicode strings
libusb1-1.0.26 library for USB device access from userspace
libutf8proc-2.4.0p0 unicode library
libv4l-1.20.0p3 libv4l userspace library
libvorbis-1.3.7 audio compression codec library
libvpx-1.13.1v0 Google VP8/VP9 video codec
libwapcaplet-0.4.3 string internment library
libwebp-1.3.1pl0 Google WebP image format conversion tool
libwpd-0.10.3 import and export WordPerfect(tm) documents
libxkbcommon-1.5.0 library to handle keyboard descriptions
libxml-2.11.5 XML parsing library
libxslt-1.1.38 XSLT C Library for GNOME
libyajl-2.1.0 small JSON library written in ANSI C
lmdb-0.9.31 Symas Lightning Memory-Mapped Database
lz4-1.9.4 fast BSD-licensed data compression
lzo2-2.10p2 portable speedy lossless data compression library
mariadb-client-10.9.6v1 multithreaded SQL database (client)
metaauto-1.0p4 wrapper for gnu auto*
motif-2.3.8p1 Motif toolkit
mozilla-dicts-en-GB-1.3p1 en-GB dictionary for Mozilla
mpfr-4.2.1 library for multiple-precision floating-point computations
mpg123-1.31.3p1 fast console MPEG audio player and decoder library
nano-7.2 simple editor, inspired by Pico
netsurf-3.10p3 lightweight web browser, with GTK interface
nghttp2-1.57.0 library for HTTP/2
nghttp3-0.15.0 implementation of HTTP/3
ngtcp2-0.19.1 implementation of the RFC 9000 QUIC protocol
noto-emoji-20211101 emoji fonts for the noto font family
noto-fonts-20201206 pan-unicode font family
npth-1.6p0 new GNU Portable Threads Library
nspr-4.35 Netscape Portable Runtime
nss-3.94 libraries to support development of security-enabled apps
oath-toolkit-2.6.9 toolkit for OATH/HOTP and TOTP
openh264-2.3.1 Cisco implementation of H.264 codec
openjp2-2.5.0 open-source JPEG 2000 codec library
openldap-client-2.6.6v0 LDAP client library and tools
opus-1.4 IETF audio codec
orc-0.4.32 library and toolset to operate arrays of data
p11-kit-0.25.0 library for loading and enumerating PKCS#11 modules
p5-Clone-0.46 recursively copy Perl datatypes
p5-Encode-Locale-1.05p0 determine the locale encoding
p5-Error-0.17029 error/exception handling in an OO-ish way
p5-File-Listing-6.15 parse directory listing
p5-HTML-Parser-3.81 modules to parse and extract information from HTML
p5-HTML-Tagset-3.20p2 data tables useful for parsing HTML
p5-HTTP-Cookies-6.10 HTTP Cookie jars
p5-HTTP-Daemon-6.16 simple http server class
p5-HTTP-Date-6.02p0 date conversion routines
p5-HTTP-Message-6.31 HTTP Style Messages
p5-HTTP-Negotiate-6.01p0 choose a variant to serve
p5-IO-HTML-1.004 open an HTML file with automatic charset detection
p5-LWP-MediaTypes-6.02p0 Guess url media type
p5-Mail-Tools-2.21p0 modules for handling mail with perl
p5-Net-HTTP-6.19 Perl HTTP connection client
p5-Regexp-IPv6-0.03p0 regular expression for IPv6 addresses
p5-SVN-1.14.2 perl interface to subversion
p5-Sub-Name-0.27 (re)name a sub
p5-Time-TimeDate-2.33 library for parsing and formatting dates and times
p5-Try-Tiny-0.31 minimal try/catch with proper preservation of $@
p5-URI-5.21 library to parse Uniform Resource Identifiers
p5-WWW-RobotRules-6.02p0 database of robots.txt-derived permissions
p5-libwww-6.72 library for WWW access in Perl
pango-1.50.14 library for layout and rendering of text
pcre-8.45 perl-compatible regular expression library
pcre2-10.37p1 perl-compatible regular expression library, version 2
pinentry-1.2.1 PIN or passphrase entry dialog (ncurses interface)
png-1.6.39 library for manipulating PNG images
poppler-23.05.0 PDF rendering library
poppler-data-0.4.12 encoding files for poppler
poppler-utils-23.05.0 PDF conversion tools and utilities
postgresql-client-15.4 PostgreSQL RDBMS (client)
py3-MarkupSafe-2.1.3 implements an XML/HTML/XHTML markup safe string
py3-alabaster-0.7.13 configurable sidebar-enabled Sphinx theme
py3-apsw-3.35.4p1 thin SQLite wrapper for Python
py3-astroid-2.12.13 common base representation of Python source code
py3-babel-2.12.1 I18N/L10N tools for Python
py3-beaker-1.11.0p0 session and caching library with wsgi middleware
py3-black-23.7.0 Python code formatter
py3-brotli-1.0.9p3 Python bindings for the Brotli compression library
py3-build-1.0.3 simple, correct PEP 517 build frontend
py3-cairo-1.25.0 cairo bindings for Python
py3-certifi-2023.5.7 TLS CA support for Python
py3-chardet-5.2.0 character encoding auto-detection in Python
py3-charset-normalizer-3.2.0 character set detector library
py3-click-8.0.4 command line library for Python
py3-codestyle-2.10.0 Python style guide checker
py3-cryptodome-3.15.0p1 self-contained cryptographic library for Python
py3-cython-0.29.34v0 optimising static compiler for Python and Cython
py3-dill-0.3.7 serialize all of python
py3-docutils-0.20.1 process plaintext documentation into other formats
py3-gobject3-3.44.1 Python bindings for GLib and GObject
py3-idna-3.4 Python library to support the IDNA protocol
py3-imagesize-1.4.1p1 getting image size from png/jpeg/jpeg2000/gif file
py3-importlib_metadata-6.6.0 library providing an API for accessing packages
metadata
py3-isort-5.12.0 Python utility / library to sort Python imports
py3-jinja2-3.1.2p1 fast, optionally sandboxed, Python template engine
py3-lazy-object-proxy-1.7.1p0 fast and thorough lazy object proxy
py3-mako-1.2.4 super-fast templating language
py3-markdown-3.4.4 text-to-HTML conversion tool
py3-mccabe-0.7.0 McCabe complexity checker for Python
py3-mypy_extensions-1.0.0 extensions to the standard "typing" module for mypy
py3-packaging-23.1 core utilities for Python packages
py3-parsing-3.1.0 Python parsing module
py3-pathspec-0.11.1 utility for gitignore style pattern matching of file paths
py3-pip-23.2.1 command-line tool for installing Python packages
py3-platformdirs-3.9.1 determine appropriate platform-specific directories
py3-psutil-5.9.4 library to retrieve system information and utilisation
py3-pygments-2.16.1 Python syntax highlighter
py3-pyproject_hooks-1.0.0 wrappers to call pyproject.toml-based build backend
hooks
py3-requests-2.31.0 elegant and simple HTTP library for Python
py3-setuptools-68.0.0v0 simplified packaging system for Python modules
py3-snowballstemmer-2.2.0p1 snowball stemming library collection for Python
py3-sphinx-7.1.2 Python documentation generator
py3-sphinxcontrib-applehelp-1.0.4 sphinx extension to output Apple help books
py3-sphinxcontrib-devhelp-1.0.2p2 sphinx extension to output Devhelp documents
py3-sphinxcontrib-htmlhelp-2.0.1 sphinx extension to output HTML help files
py3-sphinxcontrib-jsmath-1.0.1p2 sphinx extension to render display math in HTML
py3-sphinxcontrib-qthelp-1.0.3p2 sphinx extension to output QtHelp documents
py3-sphinxcontrib-serializinghtml-1.1.5p1 sphinx extension to output serialized
HTML (json and pickle)
py3-sphinxcontrib-websupport-1.2.4p2 integrate Sphinx documentation into your
Web application
py3-stemmer-2.2.0.1 snowball stemming algorithms, for information retrieval
py3-tomli-2.0.1p1 lil' TOML parser
py3-tomlkit-0.12.1 style-preserving TOML library for Python
py3-tz-2023.3p0 Python API for dealing with timezones
py3-urllib3-1.26.15 HTTP library for Python
py3-wheel-0.41.2 reference implementation for Python's "wheel" package format
py3-wrapt-1.15.0 Python module for decorators, wrappers and monkey patching
py3-zipp-3.15.0 backport of pathlib-compatible object wrapper for zip files
pylint3-2.15.9 lint-like code checker for Python code
python-3.10.13 interpreted object-oriented programming language
python-3.11.5 interpreted object-oriented programming language
python-3.9.18 interpreted object-oriented programming language
python-idle-3.10.13 IDE for Python
python-idle-3.11.5 IDE for Python
python-idle-3.9.18 IDE for Python
python-tkinter-3.10.13 Python interface to the Tk graphical toolkit
python-tkinter-3.11.5 Python interface to the Tk graphical toolkit
python-tkinter-3.9.18 Python interface to the Tk graphical toolkit
python3-3.10p2 meta-package to install the current version of python 3
quirks-6.159 exceptions to pkg_add rules and cache
raptor-2.0.16p1 RDF Parser Toolkit for Redland
rasqal-0.9.33p3 RDF Query Library for Redland
redland-1.0.17p9 high-level interface for RDF
rsync-3.2.7p1 mirroring/synchronization over low bandwidth links
serf-1.3.10 high performance HTTP client library
shared-mime-info-2.2 shared mime database for desktops
snappy-1.1.9 fast compression/decompression library
sound-theme-freedesktop-0.8p0 XDG sound theme
soundtouch-2.3.2 tempo/pitch audio processing library
speex-1.2.1 patent-free speech codec
speexdsp-1.2.1 speech processing DSP library
sqlite3-3.42.0 embedded SQL implementation
sqlite3-tcl-3.42.0 Tcl bindings for SQLite3
startup-notification-0.12p8 library for tracking application startup
stockfish-16 open source chess engine
subversion-1.14.2p0 subversion revision control system
taglib-1.13.1 managing meta-data of audio formats
tcl-8.5.19p6 Tool Command Language
tcl-8.6.13 Tool Command Language
texlive_synctex-2022 synctex for TeXLive typesetting distribution
tiff-4.5.1 tools and library routines for working with TIFF images
tk-8.5.19p2 graphical toolkit for Tcl
tk-8.6.13 graphical toolkit for Tcl
tnef-1.4.12p2 decode MS-TNEF MIME attachments
twolame-0.4.0 optimised MPEG Audio Layer 2 (MP2) encoder
unrar-6.23v2 extract, list, and test RAR archives
unzip-6.0p16 extract, list & test files in a ZIP archive
wavpack-5.6.0p0 audio codec for lossless, lossy and hybrid compression
webkitgtk40-2.42.1 GTK+ port of the WebKit (4.0) rendering engine
webkitgtk41-2.42.1 GTK+ port of the WebKit (4.1) rendering engine
woff2-1.0.2p0 Web Open Font Format 2.0 library
xdg-utils-1.1.3.20210805p0 utilities to assist desktop integration tasks
xpdf-3.04p2v0 PDF viewer for X11
xz-5.4.4 library and tools for XZ and LZMA compressed files
yelp-42.2p2 GNOME help browser
yelp-xsl-42.1p0 XSLT stylesheets for yelp
zip-3.0p1 create/update ZIP files compatible with PKZip(tm)
zstd-1.5.5 zstandard fast real-time compression algorithm
opendev$
opendev$
opendev$ exit
Script done on Thu Oct 19 16:07:40 2023
