Stefan's efforts on this are appreciated.
Our Fitlet3 units may have slight differences, but in case it is
helpful, I've included the following:
Intel Elkhart Lake Ethernet on Compulab Fitlet3 with PCI Product ID:
4ba1 and 4bb1 not recognized.
Regards,
Ted
Output of pcidump; pcidump -vv 0:29:1; pcidump -vv 0:29:2; dmesg
Domain /dev/pci0:
0:0:0: Intel Elkhart Lake Host
0:2:0: Intel UHD Graphics
0:8:0: Intel Elkhart Lake GNA
0:20:0: Intel Elkhart Lake xHCI
0:20:2: Intel Elkhart Lake SRAM
0:21:0: Intel Elkhart Lake I2C
0:21:2: Intel Elkhart Lake I2C
0:21:3: Intel Elkhart Lake I2C
0:22:0: Intel Elkhart Lake HECI
0:23:0: Intel Elkhart Lake AHCI
0:25:0: Intel Elkhart Lake I2C
0:25:2: Intel Elkhart Lake UART
0:28:0: Intel Elkhart Lake PCIE
0:28:4: Intel Elkhart Lake PCIE
0:28:6: Intel Elkhart Lake PCIE
0:29:0: Intel Elkhart Lake LH2OSE
0:29:1: Intel Elkhart Lake Ethernet
0:29:2: Intel Elkhart Lake Ethernet
0:30:0: Intel Elkhart Lake UART
0:30:1: Intel Elkhart Lake UART
0:31:0: Intel Elkhart Lake eSPI
0:31:3: Intel Elkhart Lake HD Audio
0:31:4: Intel Elkhart Lake SMBus
0:31:5: Intel Elkhart Lake SPI
1:0:0: unknown unknown
3:0:0: Intel Wi-Fi 6 AX210
0:29:1: Intel Elkhart Lake Ethernet
0x0000: Vendor ID: 8086, Product ID: 4ba1
0x0004: Command: 0000, Status: 0010
0x0008: Class: 02 Network, Subclass: 00 Ethernet,
Interface: 18, Revision: 11
0x000c: BIST: 00, Header Type: 80, Latency Timer: 00,
Cache Line Size: 00
0x0010: BAR mem 64bit addr: 0x0000006001340000/0x00040000
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 8086 Product ID: 7270
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: ff Min Gnt: 00 Max Lat: 00
0x0080: Capability 0x01: Power Management
State: D0
0x0090: Capability 0x09: Vendor Specific
0x00d0: Capability 0x05: Message Signalled Interrupts (MSI)
Enabled: no
0:29:2: Intel Elkhart Lake Ethernet
0x0000: Vendor ID: 8086, Product ID: 4bb1
0x0004: Command: 0000, Status: 0010
0x0008: Class: 02 Network, Subclass: 00 Ethernet,
Interface: 19, Revision: 11
0x000c: BIST: 00, Header Type: 80, Latency Timer: 00,
Cache Line Size: 00
0x0010: BAR mem 64bit addr: 0x0000006001300000/0x00040000
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 8086 Product ID: 7270
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: ff Min Gnt: 00 Max Lat: 00
0x0080: Capability 0x01: Power Management
State: D0
0x0090: Capability 0x09: Vendor Specific
0x00d0: Capability 0x05: Message Signalled Interrupts (MSI)
Enabled: no
OpenBSD 7.4-current (RAMDISK_CD) #1331: Sun Oct 15 10:39:10 MDT 2023
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
real mem = 8378597376 (7990MB)
avail mem = 8120643584 (7744MB)
random: good seed from bootblocks
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 3.3 @ 0x76a31000 (81 entries)
bios0: vendor American Megatrends International, LLC. version "5.19"
date 01/24/2023
bios0: Default string Default string
acpi0 at bios0: ACPI 6.2
acpi0: tables DSDT FACP MCFG SSDT SSDT SSDT FIDT OEM1 HPET APIC PRAM
RSCI SSDT SSDT SSDT NHLT SSDT SSDT PSDS LPIT SSDT DMAR SSDT TPM2 WSMT
FPDT
acpihpet0 at acpi0: 19200000 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Celeron(R) J6413 @ 1.80GHz, 1796.11 MHz, 06-96-01, patch 00000014
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,RDRAND,NXE,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SMEP,ERMS,RDSEED,SMAP,CLFLUSHOPT,CLWB,PT,SHA,UMIP,WAITPKG,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,IBRS_ALL,SKIP_L1DFL,MDS_NO,IF_PSCHANGE,MISC_PKG_CT,ENERGY_FILT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES
cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 1MB
64b/line 12-way L2 cache, 4MB 64b/line 16-way L3 cache
cpu0: apic clock running at 38MHz
cpu0: mwait min=64, max=64, C-substates=0.2.0.2.2.1.1.1, IBE
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins
acpiprt0 at acpi0: bus 0 (PC00)
acpiprt1 at acpi0: bus -1 (PEG0)
acpiprt2 at acpi0: bus -1 (PEG1)
acpiprt3 at acpi0: bus -1 (PEG2)
acpiprt4 at acpi0: bus -1 (PEG3)
acpiprt5 at acpi0: bus 1 (RP01)
acpiprt6 at acpi0: bus -1 (RP02)
acpiprt7 at acpi0: bus -1 (RP03)
acpiprt8 at acpi0: bus -1 (RP04)
acpiprt9 at acpi0: bus 2 (RP05)
acpiprt10 at acpi0: bus -1 (RP06)
acpiprt11 at acpi0: bus 3 (RP07)
acpipci0 at acpi0 PC00: 0x00000000 0x00000011 0x00000001
"INTC1027" at acpi0 not configured
"PNP0C0A" at acpi0 not configured
"ACPI0003" at acpi0 not configured
"ACPI000E" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"PNP0C0E" at acpi0 not configured
"PNP0C0C" at acpi0 not configured
"INTC1033" at acpi0 not configured
"INTC1033" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"INT33A1" at acpi0 not configured
"PNP0C0D" at acpi0 not configured
"MSFT0101" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpicpu at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpitz at acpi0 not configured
acpipwrres at acpi0 not configured
pci0 at mainbus0 bus 0
0:31:5: mem address conflict 0xfe010000/0x1000
pchb0 at pci0 dev 0 function 0 "Intel Elkhart Lake Host" rev 0x01
"Intel UHD Graphics" rev 0x01 at pci0 dev 2 function 0 not configured
"Intel Elkhart Lake GNA" rev 0x01 at pci0 dev 8 function 0 not configured
xhci0 at pci0 dev 20 function 0 "Intel Elkhart Lake xHCI" rev 0x11:
msi, xHCI 1.20
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev
3.00/1.00 addr 1
"Intel Elkhart Lake SRAM" rev 0x11 at pci0 dev 20 function 2 not configured
dwiic0 at pci0 dev 21 function 0 "Intel Elkhart Lake I2C" rev 0x11:
apic 2 int 27
iic0 at dwiic0
dwiic1 at pci0 dev 21 function 2 "Intel Elkhart Lake I2C" rev 0x11:
apic 2 int 29
iic1 at dwiic1
dwiic2 at pci0 dev 21 function 3 "Intel Elkhart Lake I2C" rev 0x11:
apic 2 int 30
iic2 at dwiic2
"INTC1027" at iic2 addr 0x1c not configured
"Intel Elkhart Lake HECI" rev 0x11 at pci0 dev 22 function 0 not configured
ahci0 at pci0 dev 23 function 0 "Intel Elkhart Lake AHCI" rev 0x11:
msi, AHCI 1.3.1
ahci0: PHY offline on port 0
ahci0: PHY offline on port 1
scsibus0 at ahci0: 32 targets
dwiic3 at pci0 dev 25 function 0 "Intel Elkhart Lake I2C" rev 0x11:
apic 2 int 31
iic3 at dwiic3
"Intel Elkhart Lake UART" rev 0x11 at pci0 dev 25 function 2 not configured
ppb0 at pci0 dev 28 function 0 "Intel Elkhart Lake PCIE" rev 0x11
pci1 at ppb0 bus 1
nvme0 at pci1 dev 0 function 0 unknown vendor 0x1dbe product 0x5208
rev 0x01: msix, NVMe 1.3
nvme0: 60GB PCIe Drive, firmware PNGA004C, serial 122237300653
scsibus1 at nvme0: 2 targets, initiator 0
sd0 at scsibus1 targ 1 lun 0: <NVMe, 60GB PCIe Drive, PNGA>
sd0: 57241MB, 512 bytes/sector, 117231408 sectors
ppb1 at pci0 dev 28 function 4 "Intel Elkhart Lake PCIE" rev 0x11
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 6 "Intel Elkhart Lake PCIE" rev 0x11
pci3 at ppb2 bus 3
iwx0 at pci3 dev 0 function 0 "Intel Wi-Fi 6 AX210" rev 0x1a, msix
"Intel Elkhart Lake LH2OSE" rev 0x11 at pci0 dev 29 function 0 not configured
"Intel Elkhart Lake Ethernet" rev 0x11 at pci0 dev 29 function 1 not configured
"Intel Elkhart Lake Ethernet" rev 0x11 at pci0 dev 29 function 2 not configured
"Intel Elkhart Lake UART" rev 0x11 at pci0 dev 30 function 0 not configured
"Intel Elkhart Lake UART" rev 0x11 at pci0 dev 30 function 1 not configured
"Intel Elkhart Lake eSPI" rev 0x11 at pci0 dev 31 function 0 not configured
"Intel Elkhart Lake HD Audio" rev 0x11 at pci0 dev 31 function 3 not configured
"Intel Elkhart Lake SMBus" rev 0x11 at pci0 dev 31 function 4 not configured
"Intel Elkhart Lake SPI" rev 0x11 at pci0 dev 31 function 5 not configured
isa0 at mainbus0
efifb0 at mainbus0: 1920x1080, 32bpp
wsdisplay0 at efifb0 mux 1: console (std, vt100 emulation)
"Burr-Brown from TI USB audio CODEC" rev 2.00/1.00 addr 2 at uhub0
port 4 not configured
"vendor 0x8087 product 0x0032" rev 2.01/0.00 addr 3 at uhub0 port 5
not configured
uhidev0 at uhub0 port 6 configuration 1 interface 0 "Logitech USB
Receiver" rev 2.00/24.11 addr 4
uhidev0: iclass 3/1
ukbd0 at uhidev0
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev1 at uhub0 port 6 configuration 1 interface 1 "Logitech USB
Receiver" rev 2.00/24.11 addr 4
uhidev1: iclass 3/1, 8 report ids
uhid at uhidev1 reportid 2 not configured
uhid at uhidev1 reportid 3 not configured
uhid at uhidev1 reportid 4 not configured
uhid at uhidev1 reportid 8 not configured
uhidev2 at uhub0 port 6 configuration 1 interface 2 "Logitech USB
Receiver" rev 2.00/24.11 addr 4
uhidev2: iclass 3/0, 33 report ids
uhid at uhidev2 reportid 16 not configured
uhid at uhidev2 reportid 17 not configured
uhid at uhidev2 reportid 32 not configured
uhid at uhidev2 reportid 33 not configured
"vendor 0x046d Logi Webcam C920e" rev 2.00/0.21 addr 5 at uhub0 port 7
not configured
"FTDI Single RS232-HS" rev 2.00/9.00 addr 6 at uhub0 port 8 not configured
softraid0 at root
scsibus2 at softraid0: 256 targets
root on rd0a swap on rd0b dump on rd0b
iwx0: could not read firmware iwx-ty-a0-gf-a0-77 (error 2)
iwx0: failed to load init firmware
iwx0: hw rev 0x420, fw 77.f92b5fed.0, pnvm 181407b3, address a0:80:69:f5:fc:d5
syncing disks...
OpenBSD 7.4-current (GENERIC.MP) #1406: Sun Oct 15 10:34:05 MDT 2023
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 8378597376 (7990MB)
avail mem = 8104927232 (7729MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 3.3 @ 0x76a31000 (81 entries)
bios0: vendor American Megatrends International, LLC. version "5.19"
date 01/24/2023
bios0: Default string Default string
efi0 at bios0: UEFI 2.7
efi0: American Megatrends rev 0x50013
acpi0 at bios0: ACPI 6.2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP MCFG SSDT SSDT SSDT FIDT OEM1 HPET APIC PRAM
RSCI SSDT SSDT SSDT NHLT SSDT SSDT PSDS LPIT SSDT DMAR SSDT TPM2 WSMT
FPDT
acpi0: wakeup devices RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) RP03(S4)
PXSX(S4) RP04(S4) PXSX(S4) RP05(S4) PXSX(S4) RP06(S4) PXSX(S4)
RP07(S4) PXSX(S4) XHCI(S3) XDCI(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimcfg0 at acpi0
acpimcfg0: addr 0xc0000000, bus 0-255
acpihpet0 at acpi0: 19200000 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Celeron(R) J6413 @ 1.80GHz, 1796.12 MHz, 06-96-01, patch 00000017
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,RDRAND,NXE,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SMEP,ERMS,RDSEED,SMAP,CLFLUSHOPT,CLWB,PT,SHA,UMIP,WAITPKG,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,IBRS_ALL,SKIP_L1DFL,MDS_NO,IF_PSCHANGE,MISC_PKG_CT,ENERGY_FILT,FB_CLEAR,XSAVEOPT,XSAVEC,XGETBV1,XSAVES
cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 1MB
64b/line 12-way L2 cache, 4MB 64b/line 16-way L3 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 38MHz
cpu0: mwait min=64, max=64, C-substates=0.2.0.2.2.1.1.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Celeron(R) J6413 @ 1.80GHz, 1796.11 MHz, 06-96-01, patch 00000017
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,RDRAND,NXE,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SMEP,ERMS,RDSEED,SMAP,CLFLUSHOPT,CLWB,PT,SHA,UMIP,WAITPKG,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,IBRS_ALL,SKIP_L1DFL,MDS_NO,IF_PSCHANGE,MISC_PKG_CT,ENERGY_FILT,FB_CLEAR,XSAVEOPT,XSAVEC,XGETBV1,XSAVES
cpu1: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 1MB
64b/line 12-way L2 cache, 4MB 64b/line 16-way L3 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Celeron(R) J6413 @ 1.80GHz, 1796.12 MHz, 06-96-01, patch 00000017
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,RDRAND,NXE,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SMEP,ERMS,RDSEED,SMAP,CLFLUSHOPT,CLWB,PT,SHA,UMIP,WAITPKG,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,IBRS_ALL,SKIP_L1DFL,MDS_NO,IF_PSCHANGE,MISC_PKG_CT,ENERGY_FILT,FB_CLEAR,XSAVEOPT,XSAVEC,XGETBV1,XSAVES
cpu2: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 1MB
64b/line 12-way L2 cache, 4MB 64b/line 16-way L3 cache
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Celeron(R) J6413 @ 1.80GHz, 1796.12 MHz, 06-96-01, patch 00000017
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,RDRAND,NXE,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SMEP,ERMS,RDSEED,SMAP,CLFLUSHOPT,CLWB,PT,SHA,UMIP,WAITPKG,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,IBRS_ALL,SKIP_L1DFL,MDS_NO,IF_PSCHANGE,MISC_PKG_CT,ENERGY_FILT,FB_CLEAR,XSAVEOPT,XSAVEC,XGETBV1,XSAVES
cpu3: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 1MB
64b/line 12-way L2 cache, 4MB 64b/line 16-way L3 cache
cpu3: smt 0, core 3, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins
acpiprt0 at acpi0: bus 0 (PC00)
acpiprt1 at acpi0: bus -1 (PEG0)
acpiprt2 at acpi0: bus -1 (PEG1)
acpiprt3 at acpi0: bus -1 (PEG2)
acpiprt4 at acpi0: bus -1 (PEG3)
acpiprt5 at acpi0: bus 1 (RP01)
acpiprt6 at acpi0: bus -1 (RP02)
acpiprt7 at acpi0: bus -1 (RP03)
acpiprt8 at acpi0: bus -1 (RP04)
acpiprt9 at acpi0: bus 2 (RP05)
acpiprt10 at acpi0: bus -1 (RP06)
acpiprt11 at acpi0: bus 3 (RP07)
acpipci0 at acpi0 PC00: 0x00000000 0x00000011 0x00000001
"INTC1027" at acpi0 not configured
acpibat0 at acpi0: BAT1 not present
acpiac0 at acpi0: AC unit online
"ACPI000E" at acpi0 not configured
"PNP0C14" at acpi0 not configured
acpibtn0 at acpi0: SLPB
acpibtn1 at acpi0: PWRB(wakeup)
"INTC1033" at acpi0 not configured
"INTC1033" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"INT33A1" at acpi0 not configured
acpibtn2 at acpi0: LID0
tpm0 at acpi0 TPM_ 2.0 (CRB) addr 0xfed40000/0x5000, device 0x00000000 rev 0x0
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
acpipwrres0 at acpi0: PXP_, resource for RP01
acpipwrres1 at acpi0: PXP_, resource for RP05, PXSX
acpipwrres2 at acpi0: PXP_, resource for RP07
acpipwrres3 at acpi0: SPPR, resource for PRT1
acpipwrres4 at acpi0: WRST
acpipwrres5 at acpi0: PAUD, resource for HDAS
acpicpu0 at acpi0: C3(200@1048 mwait.1@0x60), C2(200@253
mwait.1@0x31), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C3(200@1048 mwait.1@0x60), C2(200@253
mwait.1@0x31), C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C3(200@1048 mwait.1@0x60), C2(200@253
mwait.1@0x31), C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C3(200@1048 mwait.1@0x60), C2(200@253
mwait.1@0x31), C1(1000@1 mwait.1), PSS
acpipwrres6 at acpi0: FN00, resource for FAN0
acpipwrres7 at acpi0: FN01, resource for FAN1
acpipwrres8 at acpi0: FN02, resource for FAN2
acpipwrres9 at acpi0: FN03, resource for FAN3
acpipwrres10 at acpi0: FN04, resource for FAN4
acpitz0 at acpi0: critical temperature is 119 degC
acpipwrres11 at acpi0: PIN_
cpu0: Enhanced SpeedStep 1796 MHz: speeds: 1801, 1800, 1700, 1600,
1500, 1400, 1300, 1200, 1100, 1000, 900, 800 MHz
pci0 at mainbus0 bus 0
0:31:5: mem address conflict 0xfe010000/0x1000
pchb0 at pci0 dev 0 function 0 "Intel Elkhart Lake Host" rev 0x01
inteldrm0 at pci0 dev 2 function 0 "Intel UHD Graphics" rev 0x01
drm0 at inteldrm0
inteldrm0: msi, ELKHARTLAKE, gen 11
"Intel Elkhart Lake GNA" rev 0x01 at pci0 dev 8 function 0 not configured
xhci0 at pci0 dev 20 function 0 "Intel Elkhart Lake xHCI" rev 0x11:
msi, xHCI 1.20
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev
3.00/1.00 addr 1
"Intel Elkhart Lake SRAM" rev 0x11 at pci0 dev 20 function 2 not configured
dwiic0 at pci0 dev 21 function 0 "Intel Elkhart Lake I2C" rev 0x11:
apic 2 int 27
iic0 at dwiic0
dwiic1 at pci0 dev 21 function 2 "Intel Elkhart Lake I2C" rev 0x11:
apic 2 int 29
iic1 at dwiic1
dwiic2 at pci0 dev 21 function 3 "Intel Elkhart Lake I2C" rev 0x11:
apic 2 int 30
iic2 at dwiic2
"INTC1027" at iic2 addr 0x1c not configured
"Intel Elkhart Lake HECI" rev 0x11 at pci0 dev 22 function 0 not configured
ahci0 at pci0 dev 23 function 0 "Intel Elkhart Lake AHCI" rev 0x11:
msi, AHCI 1.3.1
ahci0: PHY offline on port 0
ahci0: PHY offline on port 1
scsibus1 at ahci0: 32 targets
dwiic3 at pci0 dev 25 function 0 "Intel Elkhart Lake I2C" rev 0x11:
apic 2 int 31
iic3 at dwiic3
"Intel Elkhart Lake UART" rev 0x11 at pci0 dev 25 function 2 not configured
ppb0 at pci0 dev 28 function 0 "Intel Elkhart Lake PCIE" rev 0x11
pci1 at ppb0 bus 1
nvme0 at pci1 dev 0 function 0 unknown vendor 0x1dbe product 0x5208
rev 0x01: msix, NVMe 1.3
nvme0: 60GB PCIe Drive, firmware PNGA004C, serial 122237300653
scsibus2 at nvme0: 2 targets, initiator 0
sd0 at scsibus2 targ 1 lun 0: <NVMe, 60GB PCIe Drive, PNGA>
sd0: 57241MB, 512 bytes/sector, 117231408 sectors
ppb1 at pci0 dev 28 function 4 "Intel Elkhart Lake PCIE" rev 0x11
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 6 "Intel Elkhart Lake PCIE" rev 0x11
pci3 at ppb2 bus 3
iwx0 at pci3 dev 0 function 0 "Intel Wi-Fi 6 AX210" rev 0x1a, msix
"Intel Elkhart Lake LH2OSE" rev 0x11 at pci0 dev 29 function 0 not configured
"Intel Elkhart Lake Ethernet" rev 0x11 at pci0 dev 29 function 1 not configured
"Intel Elkhart Lake Ethernet" rev 0x11 at pci0 dev 29 function 2 not configured
"Intel Elkhart Lake UART" rev 0x11 at pci0 dev 30 function 0 not configured
"Intel Elkhart Lake UART" rev 0x11 at pci0 dev 30 function 1 not configured
pcib0 at pci0 dev 31 function 0 "Intel Elkhart Lake eSPI" rev 0x11
azalia0 at pci0 dev 31 function 3 "Intel Elkhart Lake HD Audio" rev 0x11: msi
azalia0: no supported codecs
ichiic0 at pci0 dev 31 function 4 "Intel Elkhart Lake SMBus" rev 0x11:
apic 2 int 16
iic4 at ichiic0
iic4: addr 0x20 00=0c 01=00 02=0c 03=00 04=00 05=00 06=00 07=fe 0a=00
0b=00 0c=00 0d=00 0e=00 0f=00 10=00 11=00 12=00 13=00 3e=00 48=00
4a=00 4e=00 fc=00 fe=00 words 00=0c00 01=000c 02=0c00 03=000c 04=0000
05=0000 06=00fe 07=fe00
"Intel Elkhart Lake SPI" rev 0x11 at pci0 dev 31 function 5 not configured
isa0 at pcib0
isadma0 at isa0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX/EPT
efifb at mainbus0 not configured
uaudio0 at uhub0 port 4 configuration 1 interface 1 "Burr-Brown from
TI USB audio CODEC" rev 2.00/1.00 addr 2
uaudio0: class v1, full-speed, sync, channels: 2 play, 1 rec, 7 ctls
audio0 at uaudio0
ugen0 at uhub0 port 5 "Intel Bluetooth" rev 2.01/0.00 addr 3
uhidev0 at uhub0 port 6 configuration 1 interface 0 "Logitech USB
Receiver" rev 2.00/24.11 addr 4
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd0 at ukbd0: console keyboard
uhidev1 at uhub0 port 6 configuration 1 interface 1 "Logitech USB
Receiver" rev 2.00/24.11 addr 4
uhidev1: iclass 3/1, 8 report ids
ums0 at uhidev1 reportid 2: 16 buttons, Z and W dir
wsmouse0 at ums0 mux 0
ucc0 at uhidev1 reportid 3: 767 usages, 20 keys, array
wskbd1 at ucc0 mux 1
uhid0 at uhidev1 reportid 4: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 8: input=1, output=0, feature=0
uhidev2 at uhub0 port 6 configuration 1 interface 2 "Logitech USB
Receiver" rev 2.00/24.11 addr 4
uhidev2: iclass 3/0, 33 report ids
uhidpp0 at uhidev2 device 1 keyboard "K400 Plus"
uhid2 at uhidev2 reportid 32: input=14, output=14, feature=0
uhid3 at uhidev2 reportid 33: input=31, output=31, feature=0
uvideo0 at uhub0 port 7 configuration 1 interface 0 "Logitech Logi
Webcam C920e" rev 2.00/0.21 addr 5
video0 at uvideo0
ugen1 at uhub0 port 8 "FTDI Single RS232-HS" rev 2.00/9.00 addr 6
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
root on sd0a (659cf5a30145e83a.a) swap on sd0b dump on sd0b
inteldrm0: 1920x1080, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
wskbd1: connecting to wsdisplay0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
iwx0: hw rev 0x420, fw 77.f92b5fed.0, pnvm 181407b3, address a0:80:69:f5:fc:d5
On Sun, Oct 15, 2023 at 10:28 PM Stefan Sperling <s...@stsp.name> wrote:
>
> On Mon, Sep 18, 2023 at 09:15:48AM +0200, Wolfgang Oelerich wrote:
> > ok; thank you for the quick reply.
>
> The next amd64 -current snapshot should have dwqe(4) attach to at
> least one of the Elkhart Lake interfaces of your system, provided
> it has PCI product Id 4ba0 in pcidump -vv output.
>
> > > Am 15.09.2023 um 21:54 schrieb Stefan Sperling <s...@stsp.name>:
> > > On Fri, Sep 15, 2023 at 04:55:42PM +0200, Wolfgang Oelerich wrote:
> > >> Hello,
> > >>
> > >> recently, I „inherited“ one of Compulab‘s Fitlet3. I received it with
> > >> Linux Mint installed and found all 4 available Ethernet ports working:
> > >> 2 of its extensional FACET card and 2 of Intel‘s Elkhart Lake Atom X6425E
> > >> with MARVELL-type PHY „88E1512" at Atom's PCIe bus (see link below).
> > >>
> > >> Now, I tried a clean install of OpenBSD 7.3/AMD64 which smoothly worked
> > >> out but only the FACET card Ethernet ports have been recognized properly.
> > >> While assuming BIOS is ok since Linux Mint worked I am wondering how far
> > >> the hardware combination of X6425E/MARVELL PHY 88E1512 is already set to
> > >> be working or if there is some driver or other Kernel level code not
> > >> available yet.
> > >
> > > Elkhart Lake Ethernet will require PCI attachment code to be written
> > > for dwqe(4). There is interest in getting this working but it will take
> > > time. Definitely won't be ready for OpenBSD 7.4. Maybe 7.5.
> >
> >
>
