Hi misc@,
I just got an old Thinkpad T40 with an ATI Mobility Radeon 7500 (32MB)
and installed OpenBSD 7.3-release on it.
Unfortunately GPU acceleration doesn't work,
neofetch tells me that my GPU is llvmpipe.
When I run `glxinfo > /dev/null` I get the following output:
radeon: Invalid PCI ID.
libGL error: glx: failed to create dri2 screen
libGL error: failed to load driver: radeonsi
I tracked down the error to line 198 of
/usr/xenocara/lib/mesa/src/gallium/winsys/radeon/drm/radeon_drm_winsys.c
The oldest GPU family in the switch stmt is r300, while my GPU is r100.
This leads me to believe that hardware acceleration for my GPU is not
supported.
At least it's PCI ID is listed in
/usr/xenocara/driver/xf86-video-ati/src/ati_pciids_gen.h:81
# pcidump -v> Domain /dev/pci0:
0:0:0: Intel 82855PM Host
0x0000: Vendor ID: 8086, Product ID: 3340
0x0004: Command: 0106, Status: 2090
0x0008: Class: 06 Bridge, Subclass: 00 Host,
Interface: 00, Revision: 03
0x000c: BIST: 00, Header Type: 00, Latency Timer: 00,
Cache Line Size: 00
0x0010: BAR mem prefetchable 32bit addr: 0xd0000000/0x10000000
0x0014: BAR empty (00000000)
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 1014 Product ID: 0529
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 00 Line: 00 Min Gnt: 00 Max Lat: 00
0x00e4: Capability 0x09: Vendor Specific
0x00a0: Capability 0x02: AGP
0:1:0: Intel 82855PM AGP
0x0000: Vendor ID: 8086, Product ID: 3341
0x0004: Command: 0107, Status: 00a0
0x0008: Class: 06 Bridge, Subclass: 04 PCI,
Interface: 00, Revision: 03
0x000c: BIST: 00, Header Type: 01, Latency Timer: 60,
Cache Line Size: 00
0x0010: BAR empty (00000000)
0x0014: BAR empty (00000000)
0x0018: Primary Bus: 0, Secondary Bus: 1, Subordinate Bus: 1,
Secondary Latency Timer: 40
0x001c: I/O Base: 30, I/O Limit: 30, Secondary Status: 22a0
0x0020: Memory Base: c010, Memory Limit: c010
0x0024: Prefetch Memory Base: e000, Prefetch Memory Limit: e7f0
0x0028: Prefetch Memory Base Upper 32 Bits: 00000000
0x002c: Prefetch Memory Limit Upper 32 Bits: 00000000
0x0030: I/O Base Upper 16 Bits: 0000, I/O Limit Upper 16 Bits: 0000
0x0038: Expansion ROM Base Address: 00000000
0x003c: Interrupt Pin: 00, Line: 00, Bridge Control: 000c
0:29:0: Intel 82801DB USB
0x0000: Vendor ID: 8086, Product ID: 24c2
0x0004: Command: 0005, Status: 0280
0x0008: Class: 0c Serial Bus, Subclass: 03 USB,
Interface: 00, Revision: 01
0x000c: BIST: 00, Header Type: 80, Latency Timer: 00,
Cache Line Size: 00
0x0010: BAR empty (00000000)
0x0014: BAR empty (00000000)
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR io addr: 0x00001800/0x0020
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 1014 Product ID: 052d
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: 0b Min Gnt: 00 Max Lat: 00
0:29:1: Intel 82801DB USB
0x0000: Vendor ID: 8086, Product ID: 24c4
0x0004: Command: 0005, Status: 0280
0x0008: Class: 0c Serial Bus, Subclass: 03 USB,
Interface: 00, Revision: 01
0x000c: BIST: 00, Header Type: 00, Latency Timer: 00,
Cache Line Size: 00
0x0010: BAR empty (00000000)
0x0014: BAR empty (00000000)
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR io addr: 0x00001820/0x0020
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 1014 Product ID: 052d
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 02 Line: 0b Min Gnt: 00 Max Lat: 00
0:29:2: Intel 82801DB USB
0x0000: Vendor ID: 8086, Product ID: 24c7
0x0004: Command: 0005, Status: 0280
0x0008: Class: 0c Serial Bus, Subclass: 03 USB,
Interface: 00, Revision: 01
0x000c: BIST: 00, Header Type: 00, Latency Timer: 00,
Cache Line Size: 00
0x0010: BAR empty (00000000)
0x0014: BAR empty (00000000)
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR io addr: 0x00001840/0x0020
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 1014 Product ID: 052d
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 03 Line: 0b Min Gnt: 00 Max Lat: 00
0:29:7: Intel 82801DB USB
0x0000: Vendor ID: 8086, Product ID: 24cd
0x0004: Command: 0106, Status: 0290
0x0008: Class: 0c Serial Bus, Subclass: 03 USB,
Interface: 20, Revision: 01
0x000c: BIST: 00, Header Type: 00, Latency Timer: 00,
Cache Line Size: 00
0x0010: BAR mem 32bit addr: 0xc0000000/0x00000400
0x0014: BAR empty (00000000)
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 1014 Product ID: 052e
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 04 Line: 0b Min Gnt: 00 Max Lat: 00
0x0050: Capability 0x01: Power Management
State: D0
0x0058: Capability 0x0a: Debug Port
0:30:0: Intel 82801BAM Hub-to-PCI
0x0000: Vendor ID: 8086, Product ID: 2448
0x0004: Command: 0107, Status: 8080
0x0008: Class: 06 Bridge, Subclass: 04 PCI,
Interface: 00, Revision: 81
0x000c: BIST: 00, Header Type: 01, Latency Timer: 00,
Cache Line Size: 00
0x0010: BAR empty (00000000)
0x0014: BAR empty (00000000)
0x0018: Primary Bus: 0, Secondary Bus: 2, Subordinate Bus: 8,
Secondary Latency Timer: 40
0x001c: I/O Base: 40, I/O Limit: 80, Secondary Status: 2280
0x0020: Memory Base: c020, Memory Limit: cff0
0x0024: Prefetch Memory Base: e800, Prefetch Memory Limit: eff0
0x0028: Prefetch Memory Base Upper 32 Bits: 00000000
0x002c: Prefetch Memory Limit Upper 32 Bits: 00000000
0x0030: I/O Base Upper 16 Bits: 0000, I/O Limit Upper 16 Bits: 0000
0x0038: Expansion ROM Base Address: 00000000
0x003c: Interrupt Pin: 00, Line: 00, Bridge Control: 0004
0:31:0: Intel 82801DBM LPC
0x0000: Vendor ID: 8086, Product ID: 24cc
0x0004: Command: 000f, Status: 0280
0x0008: Class: 06 Bridge, Subclass: 01 ISA,
Interface: 00, Revision: 01
0x000c: BIST: 00, Header Type: 80, Latency Timer: 00,
Cache Line Size: 00
0x0010: BAR empty (00000000)
0x0014: BAR empty (00000000)
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 0000 Product ID: 0000
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 00 Line: 00 Min Gnt: 00 Max Lat: 00
0:31:1: Intel 82801DBM IDE
0x0000: Vendor ID: 8086, Product ID: 24ca
0x0004: Command: 0005, Status: 0280
0x0008: Class: 01 Mass Storage, Subclass: 01 IDE,
Interface: 8a, Revision: 01
0x000c: BIST: 00, Header Type: 00, Latency Timer: 00,
Cache Line Size: 00
0x0010: BAR io addr: 0x00000000/0x0008
0x0014: BAR io addr: 0x00000000/0x0004
0x0018: BAR io addr: 0x00000000/0x0008
0x001c: BAR io addr: 0x00000000/0x0004
0x0020: BAR io addr: 0x00001860/0x0010
0x0024: BAR mem 32bit addr: 0x00000000/0x00000400
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 1014 Product ID: 052d
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: 0b Min Gnt: 00 Max Lat: 00
0:31:3: Intel 82801DB SMBus
0x0000: Vendor ID: 8086, Product ID: 24c3
0x0004: Command: 0001, Status: 0280
0x0008: Class: 0c Serial Bus, Subclass: 05 SMBus,
Interface: 00, Revision: 01
0x000c: BIST: 00, Header Type: 00, Latency Timer: 00,
Cache Line Size: 00
0x0010: BAR empty (00000000)
0x0014: BAR empty (00000000)
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR io addr: 0x00001880/0x0020
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 1014 Product ID: 052d
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 02 Line: 0b Min Gnt: 00 Max Lat: 00
0:31:5: Intel 82801DB AC97
0x0000: Vendor ID: 8086, Product ID: 24c5
0x0004: Command: 0007, Status: 0290
0x0008: Class: 04 Multimedia, Subclass: 01 Audio,
Interface: 00, Revision: 01
0x000c: BIST: 00, Header Type: 00, Latency Timer: 00,
Cache Line Size: 00
0x0010: BAR io addr: 0x00001c00/0x0100
0x0014: BAR io addr: 0x000018c0/0x0040
0x0018: BAR mem 32bit addr: 0xc0000c00/0x00000200
0x001c: BAR mem 32bit addr: 0xc0000800/0x00000100
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 1014 Product ID: 0537
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 02 Line: 0b Min Gnt: 00 Max Lat: 00
0x0050: Capability 0x01: Power Management
State: D0
0:31:6: Intel 82801DB Modem
0x0000: Vendor ID: 8086, Product ID: 24c6
0x0004: Command: 0005, Status: 0290
0x0008: Class: 07 Communications, Subclass: 03 Modem,
Interface: 00, Revision: 01
0x000c: BIST: 00, Header Type: 00, Latency Timer: 00,
Cache Line Size: 00
0x0010: BAR io addr: 0x00002400/0x0100
0x0014: BAR io addr: 0x00002000/0x0080
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 1014 Product ID: 0524
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 02 Line: 0b Min Gnt: 00 Max Lat: 00
0x0050: Capability 0x01: Power Management
State: D0
1:0:0: ATI Radeon Mobility M7
0x0000: Vendor ID: 1002, Product ID: 4c57
0x0004: Command: 0387, Status: 02b0
0x0008: Class: 03 Display, Subclass: 00 VGA,
Interface: 00, Revision: 00
0x000c: BIST: 00, Header Type: 00, Latency Timer: 42,
Cache Line Size: 08
0x0010: BAR mem prefetchable 32bit addr: 0xe0000000/0x08000000
0x0014: BAR io addr: 0x00003000/0x0100
0x0018: BAR mem 32bit addr: 0xc0100000/0x00010000
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 1014 Product ID: 0530
0x0030: Expansion ROM Base Address: c0120001
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: 0b Min Gnt: 08 Max Lat: 00
0x0058: Capability 0x02: AGP
0x0050: Capability 0x01: Power Management
State: D0
2:0:0: TI PCI1520 CardBus
0x0000: Vendor ID: 104c, Product ID: ac55
0x0004: Command: 0107, Status: 0210
0x0008: Class: 06 Bridge, Subclass: 07 (unknown),
Interface: 00, Revision: 01
0x000c: BIST: 00, Header Type: 82, Latency Timer: 40,
Cache Line Size: 08
0x0010: Cardbus Control Registers Base Address: c0210000
0x0018: Primary Bus: 2 Cardbus Bus: 3 Subordinate Bus: 5
Cardbus Latency Timer: b0
0x001c: Memory Base 0: fffff000
0x0020: Memory Limit 0: 00000000
0x0024: Memory Base 1: fffff000
0x0028: Memory Limit 1: 00000000
0x002c: I/O Base 0: fffffffc
0x0030: I/O Limit 0: 00000000
0x0034: I/O Base 1: fffffffc
0x0038: I/O Limit 1: 00000000
0x003c: Interrupt Pin: 01 Line: 0b Bridge Control: 07c0
0x0040: Subsystem Vendor ID: 1014 Product ID: 0512
0x0044: 16-bit Legacy Mode Base Address: 00000001
0x00a0: Capability 0x01: Power Management
State: D0
2:0:1: TI PCI1520 CardBus
0x0000: Vendor ID: 104c, Product ID: ac55
0x0004: Command: 0107, Status: 0210
0x0008: Class: 06 Bridge, Subclass: 07 (unknown),
Interface: 00, Revision: 01
0x000c: BIST: 00, Header Type: 82, Latency Timer: 40,
Cache Line Size: 08
0x0010: Cardbus Control Registers Base Address: c0211000
0x0018: Primary Bus: 2 Cardbus Bus: 6 Subordinate Bus: 8
Cardbus Latency Timer: b0
0x001c: Memory Base 0: fffff000
0x0020: Memory Limit 0: 00000000
0x0024: Memory Base 1: fffff000
0x0028: Memory Limit 1: 00000000
0x002c: I/O Base 0: fffffffc
0x0030: I/O Limit 0: 00000000
0x0034: I/O Base 1: fffffffc
0x0038: I/O Limit 1: 00000000
0x003c: Interrupt Pin: 02 Line: 0b Bridge Control: 07c0
0x0040: Subsystem Vendor ID: 1014 Product ID: 0512
0x0044: 16-bit Legacy Mode Base Address: 00000001
0x00a0: Capability 0x01: Power Management
State: D0
2:1:0: Intel 82540EP
0x0000: Vendor ID: 8086, Product ID: 101e
0x0004: Command: 0117, Status: 0230
0x0008: Class: 02 Network, Subclass: 00 Ethernet,
Interface: 00, Revision: 03
0x000c: BIST: 00, Header Type: 00, Latency Timer: 40,
Cache Line Size: 08
0x0010: BAR mem 32bit addr: 0xc0220000/0x00020000
0x0014: BAR mem 32bit addr: 0xc0200000/0x00010000
0x0018: BAR io addr: 0x00008000/0x0040
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000022
0x002c: Subsystem Vendor ID: 1014 Product ID: 0549
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: 0b Min Gnt: ff Max Lat: 00
0x00dc: Capability 0x01: Power Management
State: D0
0x00f0: Capability 0x05: Message Signalled Interrupts (MSI)
Enabled: no
# dmesg
OpenBSD 7.3 (GENERIC) #0: Wed Jul 12 04:17:42 MDT 2023
r...@syspatch-73-i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
real mem = 2146320384 (2046MB)
avail mem = 2090049536 (1993MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: date 06/18/07, BIOS32 rev. 0 @ 0xfd750, SMBIOS rev. 2.33 @
0xe0010 (61 entries)
bios0: vendor IBM version "1RETDRWW (3.23 )" date 06/18/2007
bios0: IBM 2374AG8
acpi0 at bios0: ACPI 3.0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SSDT ECDT TCPA BOOT
acpi0: wakeup devices LID_(S3) SLPB(S3) PCI0(S3) UART(S3) PCI1(S4) USB0(S3)
USB1(S3) AC9M(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpiec0 at acpi0
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (AGP_)
acpiprt2 at acpi0: bus 2 (PCI1)
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
"PNP0A03" at acpi0 not configured
acpicmos0 at acpi0
acpibat0 at acpi0: BAT0 model "IBM-08K8193" serial 4711 type LION oem "SANYO"
acpiac0 at acpi0: AC unit online
acpithinkpad0 at acpi0: version 1.0
acpipwrres0 at acpi0: PUBS, resource for USB0, USB1, USB7
acpitz0 at acpi0: critical temperature is 93 degC
acpidock0 at acpi0: DOCK not docked (0)
acpivideo0 at acpi0: VID_
bios0: ROM list: 0xc0000/0x10000 0xd0000/0x1000 0xd1000/0x1000 0xdc000/0x4000!
0xe0000/0x10000
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel(R) Pentium(R) M processor 1.80GHz ("GenuineIntel" 686-class) 599
MHz, 06-0d-08
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE,EST,TM2,NXE,PERF,MELTDOWN
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: Enhanced SpeedStep 599 MHz: speeds: 1800, 1600, 1400, 1200, 1000, 800,
600 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82855PM Host" rev 0x03
intelagp0 at pchb0
agp0 at intelagp0: aperture at 0xd0000000, size 0x10000000
ppb0 at pci0 dev 1 function 0 "Intel 82855PM AGP" rev 0x03
pci1 at ppb0 bus 1
radeondrm0 at pci1 dev 0 function 0 "ATI Radeon Mobility M7" rev 0x00
drm0 at radeondrm0
radeondrm0: irq 11
uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x01: irq 11
uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x01: irq 11
uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x01: irq 11
ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x01: irq 11
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
addr 1
ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x81
pci2 at ppb1 bus 2
2:0:0: mem address conflict 0xb0000000/0x1000
2:0:1: mem address conflict 0xb1000000/0x1000
cbb0 at pci2 dev 0 function 0 "TI PCI1520 CardBus" rev 0x01: irq 11
cbb1 at pci2 dev 0 function 1 "TI PCI1520 CardBus" rev 0x01: irq 11
em0 at pci2 dev 1 function 0 "Intel 82540EP" rev 0x03: irq 11, address
00:0d:60:60:0c:84
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0 cacheline 0x8, lattimer 0xb0
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 6 device 0 cacheline 0x8, lattimer 0xb0
pcmcia1 at cardslot1
ichpcib0 at pci0 dev 31 function 0 "Intel 82801DBM LPC" rev 0x01
pciide0 at pci0 dev 31 function 1 "Intel 82801DBM IDE" rev 0x01: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <TS16GCF133>
wd0: 1-sector PIO, LBA48, 15279MB, 31293360 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <MATSHITA, UJDA745 DVD/CDRW, 1.03> removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
ichiic0 at pci0 dev 31 function 3 "Intel 82801DB SMBus" rev 0x01: irq 11
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR SDRAM non-parity PC2700CL2.5
spdmem1 at iic0 addr 0x51: 1GB DDR SDRAM non-parity PC2700CL2.5
auich0 at pci0 dev 31 function 5 "Intel 82801DB AC97" rev 0x01: irq 11, ICH4
ac97: codec id 0x41445374 (Analog Devices AD1981B)
ac97: codec features headphone, 20 bit DAC, No 3D Stereo
audio0 at auich0
"Intel 82801DB Modem" rev 0x01 at pci0 dev 31 function 6 not configured
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
wsmouse1 at pms0 mux 0
pms0: Synaptics touchpad, firmware 5.9, 0x2c6ab1 0x0 0x0 0x884793 0x0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
uhidev0 at uhub2 port 1 configuration 1 interface 0 "vendor 0x2b89 UGREEN
Mouse" rev 1.10/2.00 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
uhidev1 at uhub2 port 1 configuration 1 interface 1 "vendor 0x2b89 UGREEN
Mouse" rev 1.10/2.00 addr 2
uhidev1: iclass 3/1, 181 report ids
ucc0 at uhidev1 reportid 1: 1023 usages, 20 keys, array
wskbd2 at ucc0 mux 1
ums0 at uhidev1 reportid 2: 8 buttons, Z and W dir
wsmouse2 at ums0 mux 0
uhid0 at uhidev1 reportid 3: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 4: input=1, output=0, feature=0
uhid2 at uhidev1 reportid 181: input=7, output=7, feature=0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on wd0a (8a57b9dbeb1ad569.a) swap on wd0b dump on wd0b
radeondrm0: RV200
radeondrm0: 1024x768, 16bpp
wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0
wskbd1: connecting to wsdisplay0
wskbd2: connecting to wsdisplay0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
Bogus possible_clones: [ENCODER:45:DAC-45] possible_clones=0xa (full encoder
mask=0xf)
Bogus possible_clones: [ENCODER:47:TMDS-47] possible_clones=0x9 (full encoder
mask=0xf)
Bogus possible_clones: [ENCODER:51:TV-51] possible_clones=0x3 (full encoder
mask=0xf)
uaudio0 at uhub2 port 2 configuration 1 interface 1 "DeSheng Electronics Inc. KORP
THALLIUM" rev 1.10/1.00 addr 3
uaudio0: class v1, full-speed, sync, channels: 2 play, 1 rec, 8 ctls
audio1 at uaudio0
uhidev2 at uhub2 port 2 configuration 1 interface 3 "DeSheng Electronics Inc. KORP
THALLIUM" rev 1.10/1.00 addr 3
uhidev2: iclass 3/0
ucc1 at uhidev2: 10 usages, 3 keys, enum
wskbd3 at ucc1 mux 1
wskbd3: connecting to wsdisplay0
