On Tue, Apr 18, 2023 at 7:28 AM stolen data <stolen.data....@gmail.com> wrote: > > Everything seems to work. Only caveat noticed is that the firmware is > UEFI-only with no CSM/legacy mode, and it will only boot an OpenBSD > installation from GPT which must contain an EFI system partition holding > the bootloader.
great choice. my ODROID H2+ is still holding strong with the add-in card for 4 extra NICs. it is a fine home firewall. my only complaint is sometimes having rge5: watchdog timeout rge2: watchdog timeout in dmesg and occasional link state issues, but i didn't dig into whether its from the rge driver or stuff i attached. if you can, provide an iperf3 result in both forward and reverse mode. here, i only have about 1.60 Gbit/s in both directions, but that's fine for my wan link. > > > sensors and timers: > > masheen# sysctl hw.sensors kern.timecounter.choice > hw.sensors.cpu0.temp0=25.00 degC > hw.sensors.cpu0.frequency0=800000000.00 Hz > hw.sensors.cpu1.frequency0=800000000.00 Hz > hw.sensors.cpu2.frequency0=800000000.00 Hz > hw.sensors.cpu3.frequency0=800000000.00 Hz > hw.sensors.acpitz0.temp0=27.80 degC (zone temperature) > hw.sensors.softraid0.drive0=online (sd1), OK > kern.timecounter.choice=i8254(0) tsc(2000) acpihpet0(1000) acpitimer0(1000) > > > dmesg: > > OpenBSD 7.3 (GENERIC.MP) #1125: Sat Mar 25 10:36:29 MDT 2023 > dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP > real mem = 4115353600 (3924MB) > avail mem = 3971211264 (3787MB) > random: good seed from bootblocks > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 3.2 @ 0x78d74000 (138 entries) > bios0: vendor American Megatrends Inc. version "5.19" date 02/27/2023 > bios0: HARDKERNEL ODROID-H3 > efi0 at bios0: UEFI 2.7 > efi0: American Megatrends rev 0x50013 > acpi0 at bios0: ACPI 6.2 > acpi0: sleep states S0 S5 > acpi0: tables DSDT FACP MCFG FIDT SSDT SSDT SSDT HPET APIC PRAM SSDT SSDT > NHLT LPIT SSDT SSDT DBGP DBG2 SSDT DMAR SSDT TPM2 WSMT FPDT > acpi0: wakeup devices PEGP(S0) PEGP(S0) PEGP(S0) PEGP(S0) SIO1(S0) RP01(S0) > PXSX(S0) RP02(S0) PXSX(S0) RP03(S0) PXSX(S0) RP04(S0) PXSX(S0) RP05(S0) > PXSX(S0) RP06(S0) [...] > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpimcfg0 at acpi0 > acpimcfg0: addr 0xc0000000, bus 0-255 > acpihpet0 at acpi0: 19200000 Hz > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel(R) Celeron(R) N5105 @ 2.00GHz, 798.28 MHz, 06-9c-00 > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,RDRAND,NXE,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SMEP,ERMS,RDSEED,SMAP,CLFLUSHOPT,CLWB,PT,SHA,UMIP,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES > cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 1MB > 64b/line 12-way L2 cache, 4MB 64b/line 16-way L3 cache > cpu0: smt 0, core 0, package 0 > mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges > cpu0: apic clock running at 38MHz > cpu0: mwait min=64, max=64, C-substates=0.2.0.2.2.1.1.1, IBE > cpu1 at mainbus0: apid 2 (application processor) > cpu1: Intel(R) Celeron(R) N5105 @ 2.00GHz, 798.28 MHz, 06-9c-00 > cpu1: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,RDRAND,NXE,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SMEP,ERMS,RDSEED,SMAP,CLFLUSHOPT,CLWB,PT,SHA,UMIP,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES > cpu1: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 1MB > 64b/line 12-way L2 cache, 4MB 64b/line 16-way L3 cache > cpu1: smt 0, core 1, package 0 > cpu2 at mainbus0: apid 4 (application processor) > cpu2: Intel(R) Celeron(R) N5105 @ 2.00GHz, 798.27 MHz, 06-9c-00 > cpu2: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,RDRAND,NXE,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SMEP,ERMS,RDSEED,SMAP,CLFLUSHOPT,CLWB,PT,SHA,UMIP,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES > cpu2: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 1MB > 64b/line 12-way L2 cache, 4MB 64b/line 16-way L3 cache > cpu2: smt 0, core 2, package 0 > cpu3 at mainbus0: apid 6 (application processor) > cpu3: Intel(R) Celeron(R) N5105 @ 2.00GHz, 798.28 MHz, 06-9c-00 > cpu3: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,RDRAND,NXE,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SMEP,ERMS,RDSEED,SMAP,CLFLUSHOPT,CLWB,PT,SHA,UMIP,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES > cpu3: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 1MB > 64b/line 12-way L2 cache, 4MB 64b/line 16-way L3 cache > cpu3: smt 0, core 3, package 0 > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins > acpiprt0 at acpi0: bus 0 (PC00) > acpiprt1 at acpi0: bus 1 (RP01) > acpiprt2 at acpi0: bus 2 (RP02) > acpiprt3 at acpi0: bus -1 (RP03) > acpiprt4 at acpi0: bus -1 (RP04) > acpiprt5 at acpi0: bus -1 (RP06) > acpiprt6 at acpi0: bus -1 (RP07) > acpiprt7 at acpi0: bus -1 (RP08) > acpiprt8 at acpi0: bus -1 (RP09) > acpiprt9 at acpi0: bus -1 (RP10) > acpiprt10 at acpi0: bus -1 (RP11) > acpiprt11 at acpi0: bus -1 (RP12) > acpiprt12 at acpi0: bus -1 (RP13) > acpiprt13 at acpi0: bus -1 (RP14) > acpiprt14 at acpi0: bus -1 (RP15) > acpiprt15 at acpi0: bus -1 (RP16) > acpiprt16 at acpi0: bus -1 (RP17) > acpiprt17 at acpi0: bus -1 (RP18) > acpiprt18 at acpi0: bus -1 (RP19) > acpiprt19 at acpi0: bus -1 (RP20) > acpiprt20 at acpi0: bus -1 (RP21) > acpiprt21 at acpi0: bus -1 (RP22) > acpiprt22 at acpi0: bus -1 (RP23) > acpiprt23 at acpi0: bus -1 (RP24) > acpiec0 at acpi0: not present > acpipci0 at acpi0 PC00: 0x00000000 0x00000011 0x00000001 > "ACPI000E" at acpi0 not configured > acpibtn0 at acpi0: SLPB > "PNP0C14" at acpi0 not configured > "PNP0C14" at acpi0 not configured > "INT33A1" at acpi0 not configured > acpibtn1 at acpi0: PWRB > tpm0 at acpi0 TPM_ 2.0 (CRB) addr 0xfed40000/0x5000, device 0x00000000 rev > 0x0 > acpipwrres0 at acpi0: WRST > acpicpu0 at acpi0: C3(200@1048 mwait.1@0x60), C2(200@253 mwait.1@0x31), > C1(1000@1 mwait.1), PSS > acpicpu1 at acpi0: C3(200@1048 mwait.1@0x60), C2(200@253 mwait.1@0x31), > C1(1000@1 mwait.1), PSS > acpicpu2 at acpi0: C3(200@1048 mwait.1@0x60), C2(200@253 mwait.1@0x31), > C1(1000@1 mwait.1), PSS > acpicpu3 at acpi0: C3(200@1048 mwait.1@0x60), C2(200@253 mwait.1@0x31), > C1(1000@1 mwait.1), PSS > acpipwrres1 at acpi0: FN00, resource for FAN0 > acpipwrres2 at acpi0: FN01, resource for FAN1 > acpipwrres3 at acpi0: FN02, resource for FAN2 > acpipwrres4 at acpi0: FN03, resource for FAN3 > acpipwrres5 at acpi0: FN04, resource for FAN4 > acpitz0 at acpi0: critical temperature is 119 degC > acpipwrres6 at acpi0: PIN_ > acpivideo0 at acpi0: GFX0 > acpivout0 at acpivideo0: DD1F > acpivout1 at acpivideo0: DD2F > cpu0: Enhanced SpeedStep 798 MHz: speeds: 2001, 2000, 1900, 1800, 1700, > 1600, 1500, 1400, 1300, 1200, 1100, 1000, 900, 800 MHz > pci0 at mainbus0 bus 0 > 0:31:5: mem address conflict 0xfe010000/0x1000 > pchb0 at pci0 dev 0 function 0 "Intel Jasper Lake Host" rev 0x00 > inteldrm0 at pci0 dev 2 function 0 "Intel UHD Graphics" rev 0x01 > drm0 at inteldrm0 > inteldrm0: msi, JASPERLAKE, gen 11 > "Intel Jasper Lake DPTF" rev 0x00 at pci0 dev 4 function 0 not configured > "Intel Jasper Lake GNA" rev 0x00 at pci0 dev 8 function 0 not configured > xhci0 at pci0 dev 20 function 0 "Intel Jasper Lake xHCI" rev 0x01: msi, > xHCI 1.10 > usb0 at xhci0: USB revision 3.0 > uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev > 3.00/1.00 addr 1 > "Intel Jasper Lake Shared SRAM" rev 0x01 at pci0 dev 20 function 2 not > configured > dwiic0 at pci0 dev 21 function 0 "Intel Jasper Lake I2C" rev 0x01: apic 2 > int 16 > iic0 at dwiic0 > dwiic1 at pci0 dev 21 function 1 "Intel Jasper Lake I2C" rev 0x01: apic 2 > int 17 > iic1 at dwiic1 > "Intel Jasper Lake HECI" rev 0x01 at pci0 dev 22 function 0 not configured > ahci0 at pci0 dev 23 function 0 "Intel Jasper Lake AHCI" rev 0x01: msi, > AHCI 1.3.1 > ahci0: PHY offline on port 0 > ahci0: PHY offline on port 1 > scsibus1 at ahci0: 32 targets > ppb0 at pci0 dev 28 function 0 "Intel Jasper Lake PCIE" rev 0x01: msi > pci1 at ppb0 bus 1 > rge0 at pci1 dev 0 function 0 "Realtek RTL8125" rev 0x05: msi, address > 00:xx:xx:xx:xx:x1 > ppb1 at pci0 dev 28 function 1 "Intel Jasper Lake PCIE" rev 0x01: msi > pci2 at ppb1 bus 2 > rge1 at pci2 dev 0 function 0 "Realtek RTL8125" rev 0x05: msi, address > 00:xx:xx:xx:xx:x2 > ppb2 at pci0 dev 28 function 4 "Intel Jasper Lake PCIE" rev 0x01: msi > pci3 at ppb2 bus 3 > nvme0 at pci3 dev 0 function 0 vendor "Kingston", unknown product 0x500f > rev 0x03: msix, NVMe 1.3 > nvme0: KINGSTON SNVS250G, firmware S8I40102, serial XXXXXXXXXXXXXXXX > scsibus2 at nvme0: 2 targets, initiator 0 > sd0 at scsibus2 targ 1 lun 0: <NVMe, KINGSTON SNVS250, S8I4> > sd0: 238475MB, 512 bytes/sector, 488397168 sectors > pcib0 at pci0 dev 31 function 0 "Intel Jasper Lake eSPI" rev 0x01 > azalia0 at pci0 dev 31 function 3 "Intel Jasper Lake HD Audio" rev 0x01: msi > azalia0: codecs: Realtek ALC1200, Intel/0x281a, using Realtek ALC1200 > audio0 at azalia0 > ichiic0 at pci0 dev 31 function 4 "Intel Jasper Lake SMBus" rev 0x01: apic > 2 int 16 > iic2 at ichiic0 > "Intel Jasper Lake SPI" rev 0x01 at pci0 dev 31 function 5 not configured > isa0 at pcib0 > isadma0 at isa0 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > vmm0 at mainbus0: VMX/EPT > efifb at mainbus0 not configured > uhidev0 at uhub0 port 3 configuration 1 interface 0 "Cherry USB keyboard" > rev 2.00/1.03 addr 2 > uhidev0: iclass 3/1 > ukbd0 at uhidev0: 8 variable keys, 6 key codes > wskbd0 at ukbd0 mux 1 > uhidev1 at uhub0 port 3 configuration 1 interface 1 "Cherry USB keyboard" > rev 2.00/1.03 addr 2 > uhidev1: iclass 3/0, 5 report ids > uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0 > ucc0 at uhidev1 reportid 3: 24 usages, 13 keys, enum > wskbd1 at ucc0 mux 1 > uhid1 at uhidev1 reportid 5: input=0, output=0, feature=5 > vscsi0 at root > scsibus3 at vscsi0: 256 targets > softraid0 at root > scsibus4 at softraid0: 256 targets > sd1 at scsibus4 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> > sd1: 238474MB, 512 bytes/sector, 488395583 sectors > root on sd1a (18eab57adb79913d.a) swap on sd1b dump on sd1b > inteldrm0: 1024x768, 32bpp > wsdisplay0 at inteldrm0 mux 1 > wskbd0: connecting to wsdisplay0 > wskbd1: connecting to wsdisplay0 > wsdisplay0: screen 0-5 added (std, vt100 emulation)
