This might have nothing to do with OpenBSD. The router itself may need
to be restarted. I restart my router every week, ISP has it listed on
their website in FAQ.

On Sat, Apr 8, 2023 at 12:10 PM <rea...@catastrophe.net> wrote:
>
> I'm running 7.2 with an iwm(4) controller connected to a 2.4Ghz network.
>
> Every few days the device loses connectivity and can't rejoin the network
> without a reboot.
>
>
> /var/log/messages shows this:
>
> iwm0: hw rev 0x140, fw ver 17.3216344376.0, address 80:19:34:ab:ab:ab
> iwm0: device timeout
> iwm0: acquiring device failed
> iwm0: acquiring device failed
> iwm0: acquiring device failed
> iwm0: acquiring device failed
> iwm0: acquiring device failed
> iwm0: apm init error 16
> iwm0: could not initialize hardware
>
>
> The interface is in this state when disconnected.
>
> $ ifconfig iwm0
> iwm0: 
> flags=a48803<UP,BROADCAST,SIMPLEX,MULTICAST,AUTOCONF6TEMP,AUTOCONF6,AUTOCONF4>
>  mtu 1500
>     lladdr 80:19:34:ab:ab:ab
>     description: Uplink to Local Area Network
>     index 5 priority 4 llprio 3
>     groups: wlan egress
>     media: IEEE802.11 autoselect (HT-MCS14 mode 11n)
>     status: no network
>     ieee80211: nwid wifi-ssid-2.4 wpakey wpaprotos wpa2 wpaakms psk 
> wpaciphers ccmp wpagroupcipher ccmp
>     inet6 fe80::8219:34ff:abab:abab%iwm0 prefixlen 64 scopeid 0x5
>     inet6 2600:x:y:a:z:d:b:6446 prefixlen 64 autoconf pltime 584242 vltime 
> 2571442
>     inet6 2600:x:y:a:z:d:b:ddfa prefixlen 64 autoconf temporary pltime 40609 
> vltime 141102
>
>
> When the interface is joined to the network, it's at about 80% signal 
> strength.
>
> $ ifconfig iwm0
> iwm0: 
> flags=a48843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,AUTOCONF6TEMP,AUTOCONF6,AUTOCONF4>
>  mtu 1500
>         lladdr 80:19:34:ab:ab:ab
>         description: Uplink to Local Area Network
>         index 5 priority 4 llprio 3
>         groups: wlan egress
>         media: IEEE802.11 autoselect (HT-MCS13 mode 11n)
>         status: active
>         ieee80211: nwid wifi-ssid-2.4 chan 6 bssid 6c:70:9f:df:df:df 80% 
> wpakey wpaprotos wpa2 wpaakms psk wpaciphers ccmp wpagroupcipher ccmp
> [..]
>
> Are there any forthcoming improvements that may help this? fw_update shows
> the current version installed is up-to-date.
>
> Thanks for any help in advance.
>
>
> dmesg:
>
> OpenBSD 7.2 (GENERIC.MP) #7: Sat Feb 25 14:07:58 MST 2023
>     
> r...@syspatch-72-amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> real mem = 4259835904 (4062MB)
> avail mem = 4113334272 (3922MB)
> random: good seed from bootblocks
> mpath0 at root
> scsibus0 at mpath0: 256 targets
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 3.0 @ 0xcfe83040 (14 entries)
> bios0: vendor coreboot version "v4.14.0.6" date 11/04/2021
> bios0: PC Engines apu4
> acpi0 at bios0: ACPI 6.0
> acpi0: sleep states S0 S1 S4 S5
> acpi0: tables DSDT FACP SSDT MCFG TPM2 APIC HEST SSDT SSDT DRTM HPET
> acpi0: wakeup devices PBR4(S4) PBR5(S4) PBR6(S4) PBR7(S4) PBR8(S4) UOH1(S3) 
> UOH2(S3) UOH3(S3) UOH4(S3) UOH5(S3) UOH6(S3) XHC0(S4)
> acpitimer0 at acpi0: 3579545 Hz, 32 bits
> acpimcfg0 at acpi0
> acpimcfg0: addr 0xf8000000, bus 0-63
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: AMD GX-412TC SOC, 998.20 MHz, 16-30-01
> cpu0: 
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,DBKP,PERFTSC,PCTRL3,ITSC,BMI1,XSAVEOPT
> cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 2-way I-cache, 2MB 64b/line 
> 16-way L2 cache
> cpu0: smt 0, core 0, package 0
> mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
> cpu0: apic clock running at 99MHz
> cpu0: mwait min=64, max=64, IBE
> cpu1 at mainbus0: apid 1 (application processor)
> cpu1: AMD GX-412TC SOC, 998.14 MHz, 16-30-01
> cpu1: 
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,DBKP,PERFTSC,PCTRL3,ITSC,BMI1,XSAVEOPT
> cpu1: 32KB 64b/line 8-way D-cache, 32KB 64b/line 2-way I-cache, 2MB 64b/line 
> 16-way L2 cache
> cpu1: smt 0, core 1, package 0
> cpu2 at mainbus0: apid 2 (application processor)
> cpu2: AMD GX-412TC SOC, 998.27 MHz, 16-30-01
> cpu2: 
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,DBKP,PERFTSC,PCTRL3,ITSC,BMI1,XSAVEOPT
> cpu2: 32KB 64b/line 8-way D-cache, 32KB 64b/line 2-way I-cache, 2MB 64b/line 
> 16-way L2 cache
> cpu2: smt 0, core 2, package 0
> cpu3 at mainbus0: apid 3 (application processor)
> cpu3: AMD GX-412TC SOC, 998.14 MHz, 16-30-01
> cpu3: 
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,DBKP,PERFTSC,PCTRL3,ITSC,BMI1,XSAVEOPT
> cpu3: 32KB 64b/line 8-way D-cache, 32KB 64b/line 2-way I-cache, 2MB 64b/line 
> 16-way L2 cache
> cpu3: smt 0, core 3, package 0
> ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 21, 24 pins
> ioapic1 at mainbus0: apid 5 pa 0xfec20000, version 21, 32 pins
> acpihpet0 at acpi0: 14318180 Hz
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus 1 (PBR4)
> acpiprt2 at acpi0: bus 2 (PBR5)
> acpiprt3 at acpi0: bus 3 (PBR6)
> acpiprt4 at acpi0: bus 4 (PBR7)
> acpiprt5 at acpi0: bus 5 (PBR8)
> acpicpu0 at acpi0: C2(0@400 io@0x1771), C1(@1 halt!), PSS
> acpicpu1 at acpi0: C2(0@400 io@0x1771), C1(@1 halt!), PSS
> acpicpu2 at acpi0: C2(0@400 io@0x1771), C1(@1 halt!), PSS
> acpicpu3 at acpi0: C2(0@400 io@0x1771), C1(@1 halt!), PSS
> acpicpu4 at acpi0: no cpu matching ACPI ID 4
> acpicpu5 at acpi0: no cpu matching ACPI ID 5
> acpicpu6 at acpi0: no cpu matching ACPI ID 6
> acpicpu7 at acpi0: no cpu matching ACPI ID 7
> acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
> acpicmos0 at acpi0
> com0 at acpi0 COM1 addr 0x3f8/0x8 irq 4: ns16550a, 16 byte fifo
> com0: console
> com1 at acpi0 COM2 addr 0x2f8/0x8 irq 3: ns16550a, 16 byte fifo
> amdgpio0 at acpi0 GPIO uid 0 addr 0xfed81500/0x300 irq 7, 184 pins
> "PRP0001" at acpi0 not configured
> "PRP0001" at acpi0 not configured
> "PRP0001" at acpi0 not configured
> "PRP0001" at acpi0 not configured
> "PRP0001" at acpi0 not configured
> "PRP0001" at acpi0 not configured
> "BOOT0000" at acpi0 not configured
> acpitz0 at acpi0: critical temperature is 115 degC
> cpu0: 998 MHz: speeds: 1000 800 600 MHz
> pci0 at mainbus0 bus 0
> pchb0 at pci0 dev 0 function 0 "AMD 16h Root Complex" rev 0x00
> vendor "AMD", unknown product 0x1567 (class system subclass IOMMU, rev 0x00) 
> at pci0 dev 0 function 2 not configured
> pchb1 at pci0 dev 2 function 0 "AMD 16h Host" rev 0x00
> ppb0 at pci0 dev 2 function 1 "AMD 16h PCIE" rev 0x00: msi
> pci1 at ppb0 bus 1
> em0 at pci1 dev 0 function 0 "Intel I211" rev 0x03: msi, address 
> 00:0d:01:04:09:f0
> ppb1 at pci0 dev 2 function 2 "AMD 16h PCIE" rev 0x00: msi
> pci2 at ppb1 bus 2
> em1 at pci2 dev 0 function 0 "Intel I211" rev 0x03: msi, address 
> 00:0d:01:04:09:f1
> ppb2 at pci0 dev 2 function 3 "AMD 16h PCIE" rev 0x00: msi
> pci3 at ppb2 bus 3
> em2 at pci3 dev 0 function 0 "Intel I211" rev 0x03: msi, address 
> 00:0d:01:04:09:f2
> ppb3 at pci0 dev 2 function 4 "AMD 16h PCIE" rev 0x00: msi
> pci4 at ppb3 bus 4
> em3 at pci4 dev 0 function 0 "Intel I211" rev 0x03: msi, address 
> 00:0d:01:04:09:f3
> ppb4 at pci0 dev 2 function 5 "AMD 16h PCIE" rev 0x00: msi
> pci5 at ppb4 bus 5
> iwm0 at pci5 dev 0 function 0 "Intel AC 7260" rev 0xc3, msi
> ccp0 at pci0 dev 8 function 0 "AMD 16h Crypto" rev 0x00
> xhci0 at pci0 dev 16 function 0 "AMD Bolton xHCI" rev 0x11: msi, xHCI 1.0
> usb0 at xhci0: USB revision 3.0
> uhub0 at usb0 configuration 1 interface 0 "AMD xHCI root hub" rev 3.00/1.00 
> addr 1
> ahci0 at pci0 dev 17 function 0 "AMD Hudson-2 SATA" rev 0x40: apic 4 int 19, 
> AHCI 1.3
> ahci0: port 0: 6.0Gb/s
> scsibus1 at ahci0: 32 targets
> sd0 at scsibus1 targ 0 lun 0: <ATA, TS64GMSA230S, R042> naa.57c35481dc080848
> sd0: 61057MB, 512 bytes/sector, 125045424 sectors, thin
> ehci0 at pci0 dev 18 function 0 "AMD Hudson-2 USB2" rev 0x39: apic 4 int 18
> usb1 at ehci0: USB revision 2.0
> uhub1 at usb1 configuration 1 interface 0 "AMD EHCI root hub" rev 2.00/1.00 
> addr 1
> ehci1 at pci0 dev 19 function 0 "AMD Hudson-2 USB2" rev 0x39: apic 4 int 18
> usb2 at ehci1: USB revision 2.0
> uhub2 at usb2 configuration 1 interface 0 "AMD EHCI root hub" rev 2.00/1.00 
> addr 1
> piixpm0 at pci0 dev 20 function 0 "AMD Hudson-2 SMBus" rev 0x42: SMI
> iic0 at piixpm0
> iic1 at piixpm0
> iic1: addr 0x4c 3e=00 48=00 4a=00 4e=00 fc=00 fe=00 words 00=ffff 01=ffff 
> 02=ffff 03=ffff 04=ffff 05=ffff 06=ffff 07=ffff
> pcib0 at pci0 dev 20 function 3 "AMD Hudson-2 LPC" rev 0x11
> sdhc0 at pci0 dev 20 function 7 "AMD Bolton SD/MMC" rev 0x01: apic 4 int 16
> sdhc0: SDHC 3.0, 200 MHz base clock
> sdmmc0 at sdhc0: 8-bit, sd high-speed, mmc high-speed, dma
> pchb2 at pci0 dev 24 function 0 "AMD 16h Link Cfg" rev 0x00
> pchb3 at pci0 dev 24 function 1 "AMD 16h Address Map" rev 0x00
> pchb4 at pci0 dev 24 function 2 "AMD 16h DRAM Cfg" rev 0x00
> km0 at pci0 dev 24 function 3 "AMD 16h Misc Cfg" rev 0x00
> pchb5 at pci0 dev 24 function 4 "AMD 16h CPU Power" rev 0x00
> pchb6 at pci0 dev 24 function 5 "AMD 16h Misc Cfg" rev 0x00
> isa0 at pcib0
> isadma0 at isa0
> com2 at isa0 port 0x3e8/8 irq 5: ns16550a, 16 byte fifo
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> lpt0 at isa0 port 0x378/4 irq 7
> intr_establish: pic ioapic0 pin 7: can't share type 3 with 2
> wbsio0 at isa0 port 0x2e/2: NCT5104D rev 0x53
> vmm0 at mainbus0: SVM/RVI
> scsibus2 at sdmmc0: 2 targets, initiator 0
> sd1 at scsibus2 targ 1 lun 0: <SD/MMC, SN64G, 0086> removable
> sd1: 60906MB, 512 bytes/sector, 124735488 sectors
> umass0 at uhub0 port 1 configuration 1 interface 0 "Samsung Flash Drive FIT" 
> rev 3.10/11.00 addr 2
> umass0: using SCSI over Bulk-Only
> scsibus3 at umass0: 2 targets, initiator 0
> sd2 at scsibus3 targ 1 lun 0: <Samsung, Flash Drive FIT, 1100> removable 
> serial.090c1000421080001474
> sd2: 122376MB, 512 bytes/sector, 250626566 sectors
> uhub3 at uhub1 port 1 configuration 1 interface 0 "Advanced Micro Devices 
> Hub" rev 2.00/0.18 addr 2
> uhub4 at uhub2 port 1 configuration 1 interface 0 "Advanced Micro Devices 
> Hub" rev 2.00/0.18 addr 2
> ugen0 at uhub4 port 4 "Intel Bluetooth" rev 2.00/0.01 addr 3
> vscsi0 at root
> scsibus4 at vscsi0: 256 targets
> softraid0 at root
> scsibus5 at softraid0: 256 targets
> root on sd0a (a5bb2c57e3f3aff3.a) swap on sd0b dump on sd0b
> iwm0: hw rev 0x140, fw ver 17.3216344376.0, address 80:19:34:ab:ab:ab
>
>
>

Reply via email to