Hallo, I bought industrial fanless pc for using it as firewall with
OpenBSD. I tried both 7.2 and 7.3-beta, I installed the stock operating
system without any customization, the four nic and the wifi did not work
out of the box. The differences is that during the installation the
wireless card is recognized as iwn0, but fail to load the firmware, the
nics do not appear in the list of configurable network card.
I tried to load OpenBSD firmware from:
http://firmware.openbsd.org
Both 7.2 and 7.3 but the results are the same, wireless nic
startworking, but not the for wired nic. During the boot I see this
error for every nic:
igc0 at pci1 dev 0 function 0 "Intel I225-V" rev 0x03: not enough msi-x
vectors
igc0: unable to map msi-x vector 0
I tried to install FreeBSD13.1 and GNU/Linux (Ubuntu 20.04) and both
recognize all nic and wireless card, so the hardware seems ok.
My dmesg:
<quote>
OpenBSD 7.3-beta (GENERIC.MP) #1091: Sat Mar 4 12:11:33 MST 2023
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 8112578560 (7736MB)
avail mem = 7847309312 (7483MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 3.2 @ 0xead90 (56 entries)
bios0: vendor American Megatrends Inc. version "5.13" date 07/19/2022
bios0: Default string Default string
acpi0 at bios0: ACPI 6.2
acpi0: sleep states S0 S3 S4 S5, can't enable ACPI
mpbios0 at bios0: Intel MP Specification 1.4
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Celeron(R) J4125 CPU @ 2.00GHz, 1994.48 MHz, 06-7a-08
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SGX,SMEP,ERMS,MPX,RDSEED,SMAP,CLFLUSHOPT,PT,SHA,UMIP,MD_CLEAR,IBRS,IBPB,STIBP,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES
cpu0: 24KB 64b/line 6-way D-cache, 32KB 64b/line 8-way I-cache, 4MB
64b/line 16-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 19MHz
cpu0: mwait min=64, max=64, C-substates=0.2.0.2.4.2.1.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Celeron(R) J4125 CPU @ 2.00GHz, 1994.48 MHz, 06-7a-08
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SGX,SMEP,ERMS,MPX,RDSEED,SMAP,CLFLUSHOPT,PT,SHA,UMIP,MD_CLEAR,IBRS,IBPB,STIBP,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES
cpu1: 24KB 64b/line 6-way D-cache, 32KB 64b/line 8-way I-cache, 4MB
64b/line 16-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Celeron(R) J4125 CPU @ 2.00GHz, 1994.48 MHz, 06-7a-08
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SGX,SMEP,ERMS,MPX,RDSEED,SMAP,CLFLUSHOPT,PT,SHA,UMIP,MD_CLEAR,IBRS,IBPB,STIBP,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES
cpu2: 24KB 64b/line 6-way D-cache, 32KB 64b/line 8-way I-cache, 4MB
64b/line 16-way L2 cache
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Celeron(R) J4125 CPU @ 2.00GHz, 1994.48 MHz, 06-7a-08
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SGX,SMEP,ERMS,MPX,RDSEED,SMAP,CLFLUSHOPT,PT,SHA,UMIP,MD_CLEAR,IBRS,IBPB,STIBP,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES
cpu3: 24KB 64b/line 6-way D-cache, 32KB 64b/line 8-way I-cache, 4MB
64b/line 16-way L2 cache
cpu3: smt 0, core 3, package 0
mpbios0: bus 0 is type PCI
mpbios0: bus 1 is type PCI
mpbios0: bus 2 is type PCI
mpbios0: bus 3 is type PCI
mpbios0: bus 4 is type PCI
mpbios0: bus 5 is type PCI
mpbios0: bus 6 is type ISA
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 120 pins
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Gemini Lake Host" rev 0x06
"Intel Gemini Lake DPTF" rev 0x06 at pci0 dev 0 function 1 not configured
inteldrm0 at pci0 dev 2 function 0 "Intel UHD Graphics 600" rev 0x06
drm0 at inteldrm0
inteldrm0: apic 1 int 19, GEMINILAKE, gen 9
azalia0 at pci0 dev 14 function 0 "Intel Gemini Lake HD Audio" rev
0x06pci_intr_map: bad interrupt line 25
: can't map interrupt
"Intel Gemini Lake MEI" rev 0x06 at pci0 dev 15 function 0 not configured
ahci0 at pci0 dev 18 function 0 "Intel Gemini Lake AHCI" rev 0x06: apic
1 int 19, AHCI 1.3.1
ahci0: port 0: 6.0Gb/s
ahci0: PHY offline on port 1
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, IM128-P130, SBFQ> naa.0000000000000000
sd0: 122104MB, 512 bytes/sector, 250069680 sectors, thin
ppb0 at pci0 dev 19 function 0 "Intel Gemini Lake PCIE" rev 0xf6: apic 1
int 21
pci1 at ppb0 bus 1
igc0 at pci1 dev 0 function 0 "Intel I225-V" rev 0x03: not enough msi-x
vectors
igc0: unable to map msi-x vector 0
ppb1 at pci0 dev 19 function 1 "Intel Gemini Lake PCIE" rev 0xf6: apic 1
int 21
pci2 at ppb1 bus 2
igc1 at pci2 dev 0 function 0 "Intel I225-V" rev 0x03: not enough msi-x
vectors
igc1: unable to map msi-x vector 0
ppb2 at pci0 dev 19 function 2 "Intel Gemini Lake PCIE" rev 0xf6: apic 1
int 21
pci3 at ppb2 bus 3
iwn0 at pci3 dev 0 function 0 "Intel Centrino Advanced-N 6235" rev 0x24:
apic 1 int 20, MIMO 2T2R, AGN, address c8:f7:33:a6:51:bc
ppb3 at pci0 dev 20 function 0 "Intel Gemini Lake PCIE" rev 0xf6: apic 1
int 22
pci4 at ppb3 bus 4
igc2 at pci4 dev 0 function 0 "Intel I225-V" rev 0x03: not enough msi-x
vectors
igc2: unable to map msi-x vector 0
ppb4 at pci0 dev 20 function 1 "Intel Gemini Lake PCIE" rev 0xf6: apic 1
int 22
pci5 at ppb4 bus 5
igc3 at pci5 dev 0 function 0 "Intel I225-V" rev 0x03: not enough msi-x
vectors
igc3: unable to map msi-x vector 0
xhci0 at pci0 dev 21 function 0 "Intel Gemini Lake xHCI" rev 0x06: apic
1 int 17, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev
3.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel Gemini Lake LPC" rev 0x06
ichiic0 at pci0 dev 31 function 1 "Intel Gemini Lake SMBus" rev 0x06:
apic 1 int 20
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 8GB DDR4 SDRAM PC4-21300 SO-DIMM
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX/EPT
uhidev0 at uhub0 port 4 configuration 1 interface 0 "Unicomp Inc
Ruffian6_x Kbrd v3_xx" rev 2.00/3.26 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes, country code 33
wskbd0 at ukbd0: console keyboard
ugen0 at uhub0 port 7 "Intel Bluetooth" rev 2.00/78.69 addr 3
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (a65ae784365a70b3.a) swap on sd0b dump on sd0b
drm:pid0:intel_step_init *WARNING* [drm] Unknown revid 0x06
inteldrm0: 3840x2160, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
</quote>
Any idea?
Thanks, Pietro.
--
I will build myself a copper tower
With four ways out and no way in
But mine the glory, mine the power
(So I chose AmigaOS, GNU/Linux and OpenBSD)
