Bryan Irvine wrote:
> I don't suppose you are using a quad card of some kind are you?
> 
> 
...
Three dual cards, dmesg (extracted from /var/log/messages) below:

OpenBSD 3.8-stable (GENERIC.MP) #0: Thu Jan  5 03:55:53 EST 2006
    [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel Pentium III ("GenuineIntel" 686-class) 798 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,
FXSR,SSE
real mem  = 536436736 (523864K)
avail mem = 482525184 (471216K)
using 4278 buffers containing 26923008 bytes (26292K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 12/31/99, BIOS32 rev. 0 @ 0xf0000
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x2000
pcibios0: PCI BIOS has 6 Interrupt Routing table entries
pcibios0: PCI Interrupt Router at 000:15:0 ("ServerWorks ROSB4 SouthBridge"
rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x4000! 0xe8000/0x6000
0xee000/0x2000!
mainbus0: Intel MP Specification (Version 1.4) (COMPAQ   PROLIANT    )
cpu0 at mainbus0: apid 3 (boot processor)
cpu0: apic clock running at 132 MHz
cpu1 at mainbus0: apid 0 (application processor)
cpu1: Intel Pentium III ("GenuineIntel" 686-class) 797 MHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,
FXSR,SSE
mainbus0: bus 0 is type PCI
mainbus0: bus 3 is type PCI
mainbus0: bus 9 is type ISA
ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 11, 35 pins
ioapic0: misconfigured as apic 0, remapped to apic 8
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "ServerWorks CNB20LE Host" rev 0x05
pchb1 at pci0 dev 0 function 1 "ServerWorks CNB20LE Host" rev 0x05
pci1 at pchb1 bus 3
fxp0 at pci1 dev 4 function 0 "Intel 82557" rev 0x08, i82559: apic 8 int 10
(irq 10), address 00:50:8b:e2:6e:fb
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
fxp1 at pci1 dev 5 function 0 "Intel 82557" rev 0x08, i82559: apic 8 int 11
(irq 11), address 00:50:8b:e2:6e:fa
inphy1 at fxp1 phy 1: i82555 10/100 PHY, rev. 4
ppb0 at pci1 dev 6 function 0 "DEC 21154 PCI-PCI" rev 0x05
pci2 at ppb0 bus 4
fxp2 at pci2 dev 4 function 0 "Intel 82557" rev 0x08, i82559: apic 8 int 11
(irq 11), address 00:02:a5:60:58:50
inphy2 at fxp2 phy 1: i82555 10/100 PHY, rev. 4
fxp3 at pci2 dev 5 function 0 "Intel 82557" rev 0x08, i82559: apic 8 int 10
(irq 10), address 00:02:a5:60:58:51
inphy3 at fxp3 phy 1: i82555 10/100 PHY, rev. 4
cac0 at pci0 dev 1 function 0 "Symbios Logic 53c1510" rev 0x02: apic 8 int 3
(irq 3) Compaq Integrated Array
scsibus0 at cac0: 1 targets
sd0 at scsibus0 targ 0 lun 0: <Compaq, RAID1 volume #, > SCSI2 0/direct
fixed
sd0: 17359MB, 4357 cyl, 255 head, 32 sec, 512 bytes/sec, 35553120 sec total
vga1 at pci0 dev 3 function 0 "ATI Mach64 GV" rev 0x7a
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Compaq Netelligent ASMC" rev 0x00 at pci0 dev 4 function 0 not configured
ppb1 at pci0 dev 5 function 0 "IBM 82351 PCI-PCI" rev 0x01
pci3 at ppb1 bus 1
tl0 at pci3 dev 0 function 0 "Compaq DP Netelligent 10/100TX" rev 0x10: apic
8 int 5 (irq 5) address 00:08:c7:a4:84:6d
nsphy0 at tl0 phy 1: DP83840 10/100 PHY, rev. 1
ukphy0 at tl0 phy 31: Generic IEEE 802.3u media interface
ukphy0: OUI 0x100014, model 0x0001, rev. 5
tl1 at pci3 dev 1 function 0 "Compaq DP Netelligent 10/100TX" rev 0x10: apic
8 int 7 (irq 7) address 00:08:c7:a4:84:ed
nsphy1 at tl1 phy 1: DP83840 10/100 PHY, rev. 1
ukphy1 at tl1 phy 31: Generic IEEE 802.3u media interface
ukphy1: OUI 0x100014, model 0x0001, rev. 5
pcib0 at pci0 dev 15 function 0 "ServerWorks ROSB4 SouthBridge" rev 0x4f
pciide0 at pci0 dev 15 function 1 "ServerWorks OSB4 IDE" rev 0x00: DMA
atapiscsi0 at pciide0 channel 1 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <COMPAQ, CD-ROM CRN-8241B, 2.23> SCSI0 5/cdrom
removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask 0 netmask 0 ttymask 0
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: sd0 matches BIOS drive 0x80
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02

Reply via email to