Greg Oster wrote:
Adam PAPAI writes:
Hello misc,
I have an IBM xSeries 335 machine with Dual Xeon processor and 2x73GB
SCSI Seagate Barracuda 10K rpm disc. I run OpenBSD 3.8 on it.
When I'm creating the raid array (raidctl -iv raid0), I get the
following error message:
sd0(mpt0:0:0): Check Condition (error 0x70) on opcode 0x28
SENSE KEY: Media Error
INFO: 0x224c10c (VALID flag on)
ASC/ASCQ: Read Retries Exhausted
SKSV: Actual Retry Count: 63
raid0: IO Error. Marking /dev/sd0d as failed.
raid0: node (Rod) returned fail, rolling backward
Unable to verify raid1 parity: can't read stripe.
Could not verify parity.
Is this early in the initialization or late in the initialization?
Try doing:
dd if=/dev/rsd0d of=/dev/null bs=10m
and see if you get the same error message...
# dd if=/dev/rsd0d of=/dev/null bs=10m
6977+1 records in
6977+1 records out
73160687104 bytes transferred in 1043.771 secs (70092636 bytes/sec)
# dd if=/dev/rsd1d of=/dev/null bs=10m
6977+1 records in
6977+1 records out
73160687104 bytes transferred in 1027.051 secs (71233712 bytes/sec)
#
This means no hdd error.. Then probably the raidFrame has the problem I
guess..
I have to use /altroot on /dev/sd1a then, or is there a patch for
raidframe to fix this?
--
Adam PAPAI
D i g i t a l Influence
http://www.digitalinfluence.hu
Phone: +36 30 33-55-735
E-mail: [EMAIL PROTECTED]
