Hi,
Thank you for all the suggestions. Unfortunately it did not help.
> you are missing 01: on start as suggested in man page
Thank you, I overlooked that. However, setting the 01: in front of the MAC
address did not help since I'm still getting the same lladdr.
# cat /etc/hostname.em0
inet autoconf
cat /etc/dhcpleased.conf
interface em0 {
send client id "01:00:11:22:33:44:55"
}
# ifconfig
em0: flags=808843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,AUTOCONF4> mtu 1500
lladdr 08:00:27:c7:60:ac
index 1 priority 0 llprio 3
groups: egress
media: Ethernet autoselect (1000baseT full-duplex)
status: active
inet 192.168.0.209 netmask 0xffff0000 broadcast 192.168.255.255
> My ISPs (one at the house, one at my son's apartment) have the same
> setup and I'm using this in /etc/hostname.em0
> > lladdr 00:11:22:33:44:55
> > inet autoconf
> This will give the correct IP address in both cases.
I commented out my /etc/dhcpleased.conf and set my /etc/hostname.em0 like
that, but my inet line is missing after reboot and so is the connection to
my network.
# ifconfig
em0: flags=808843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,AUTOCONF4> mtu 1500
lladdr 00:11:22:33:44:55
index 1 priority 0 llprio 3
media: Ethernet autoselect (1000baseT full-duplex)
status: active
Best regards,
Tomaz
