Here's my feedback on the DL385 on a recent 3.9 snapshot.
It's a ULTRA 320 SCSI/RAID version.
What works: everything but RAID management through bioctl, I hope
to find a way to at least retrieve RAID status.
The RAID array is super fast but I haven't tried anything but stress to
test the machine.
I'm running an i386 MP kernel since IRQ routing is faster than on the
amd64 version.
There's two additionnal nics on the box
OpenBSD 3.9 (GENERIC.MP) #597: Tue Feb 28 20:51:43 MST 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: AMD Opteron(tm) Processor 252 ("AuthenticAMD" 686-class, 1024KB L2 cache)
2.61 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3
real mem = 1073291264 (1048136K)
avail mem = 972595200 (949800K)
using 4278 buffers containing 53768192 bytes (52508K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 12/31/99, BIOS32 rev. 0 @ 0xf0000
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x2000
pcibios0: PCI BIOS has 7 Interrupt Routing table entries
pcibios0: no compatible PCI ICU found
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #3 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x4000! 0xcc000/0x1600 0xee000/0x2000
mainbus0: Intel MP Specification (Version 1.4) (HP PROLIANT )
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD Powernow: TS FID VID TTP
cpu0: apic clock running at 200 MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: AMD Opteron(tm) Processor 252 ("AuthenticAMD" 686-class, 1024KB L2 cache)
2.61 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3
mainbus0: bus 0 is type PCI
mainbus0: bus 1 is type PCI
mainbus0: bus 2 is type PCI
mainbus0: bus 3 is type PCI
mainbus0: bus 4 is type PCI
mainbus0: bus 5 is type PCI
mainbus0: bus 6 is type PCI
mainbus0: bus 32 is type ISA
ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 11, 24 pins
ioapic1 at mainbus0: apid 5 pa 0xfec10000, version 11, 4 pins
ioapic2 at mainbus0: apid 6 pa 0xfec20000, version 11, 4 pins
ioapic3 at mainbus0: apid 7 pa 0xfdc00000, version 11, 4 pins
ioapic4 at mainbus0: apid 8 pa 0xfdc10000, version 11, 4 pins
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
ppb0 at pci0 dev 3 function 0 "AMD 8111 PCI-PCI" rev 0x07
pci1 at ppb0 bus 1
ohci0 at pci1 dev 0 function 0 "AMD 8111 USB" rev 0x0b: apic 4 int 19 (irq 5),
version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: AMD OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1 at pci1 dev 0 function 1 "AMD 8111 USB" rev 0x0b: apic 4 int 19 (irq 5),
version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: AMD OHCI root hub, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
"Compaq iLO" rev 0x01 at pci1 dev 2 function 0 not configured
"Compaq iLO" rev 0x01 at pci1 dev 2 function 2 not configured
vga1 at pci1 dev 3 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 4 function 0 "AMD AMD8111 LPC" rev 0x05
pciide0 at pci0 dev 4 function 1 "AMD 8111 IDE" rev 0x03: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TEAC, CD-224E, 9.9A> SCSI0 5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, DMA mode 2
pciide0: channel 1 ignored (disabled)
amdpm0 at pci0 dev 4 function 3 "AMD 8111 Power" rev 0x05: rng active
iic0 at amdpm0
ppb1 at pci0 dev 7 function 0 "AMD 8131 PCIX" rev 0x12
pci2 at ppb1 bus 2
ciss0 at pci2 dev 4 function 0 "Compaq Smart Array 64xx" rev 0x01: apic 5 int 0
(irq 7)
ciss0: 1 LD, HW rev 1, FW 2.36/2.36
scsibus1 at ciss0: 1 targets
sd0 at scsibus1 targ 0 lun 0: <HP, LOGICAL VOLUME, 2.36> SCSI0 0/direct fixed
sd0: 69459MB, 69459 cyl, 64 head, 32 sec, 512 bytes/sec, 142253280 sec total
"AMD 8131 PCIX IOAPIC" rev 0x01 at pci0 dev 7 function 1 not configured
ppb2 at pci0 dev 8 function 0 "AMD 8131 PCIX" rev 0x12
pci3 at ppb2 bus 3
bge0 at pci3 dev 6 function 0 "Broadcom BCM5704C" rev 0x10, BCM5704 B0
(0x2100): apic 6 int 0 (irq 7), address 00:14:c2:40:66:0c
brgphy0 at bge0 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0
bge1 at pci3 dev 6 function 1 "Broadcom BCM5704C" rev 0x10, BCM5704 B0
(0x2100): apic 6 int 1 (irq 10), address 00:14:c2:40:66:0b
brgphy1 at bge1 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0
"AMD 8131 PCIX IOAPIC" rev 0x01 at pci0 dev 8 function 1 not configured
pchb0 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
pci4 at pchb0 bus 4
ppb3 at pci4 dev 9 function 0 "AMD 8131 PCIX" rev 0x12
pci5 at ppb3 bus 5
em0 at pci5 dev 8 function 0 "Intel PRO/1000 (82542)" rev 0x02: apic 7 int 0
(irq 7), address 00:90:27:c2:2a:a6
"AMD 8131 PCIX IOAPIC" rev 0x01 at pci4 dev 9 function 1 not configured
ppb4 at pci4 dev 10 function 0 "AMD 8131 PCIX" rev 0x12
pci6 at ppb4 bus 6
fxp0 at pci6 dev 9 function 0 "Intel 8255x" rev 0x08, i82559: apic 8 int 0 (irq
7), address 00:d0:b7:e3:df:65
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
"AMD 8131 PCIX IOAPIC" rev 0x01 at pci4 dev 10 function 1 not configured
pchb1 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
pchb2 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb3 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
pchb4 at pci0 dev 25 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb5 at pci0 dev 25 function 1 "AMD AMD64 Address Map" rev 0x00
pchb6 at pci0 dev 25 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb7 at pci0 dev 25 function 3 "AMD AMD64 Misc Cfg" rev 0x00
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask 0 netmask 0 ttymask 0
pctr: user-level cycle counter enabled
dkcsum: sd0 matches BIOS drive 0x80
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
cpu1: AMD Powernow: TS FID VID TTP
--
Pierre-Yves Ritschard
Ingenieur Systemes, Reseaux et Securite
Steria Pour France Telecom - SCR/HDI/DOP/HEBEX
Sophia-Antipolis - France
