Dnia Thu, Mar 10, 2022 at 08:54:53AM +0100, Markus Rosjat napisał(a): > I already tried that on my XTM5 here but it isnt working so far , the > problem seems to be a locked down bios and I fround some post that > mentioned booting from the USB ports wasnt enabled. What i tried > > so far is: > > - booting from USB -> not working > > - booting from a CF Card -> not working > > the BISO Version of the WatchGuard is 1.3 > > > Am 09.03.2022 um 17:21 schrieb Graeme Neilson: > > On the Watxhguard XTM5 you remove the compact flash, add a hard drive to > > the internal SATA port and boot from USB using the RJ45 serial console. I > > have a patched lcdproc for the small screen. Arch is amd64 and you can very > > cheaply upgrade the CPU and add up to 8Gb RAM. > > > >> On 10/03/2022, at 00:01, Markus Rosjat <ros...@ghweb.de> wrote: > >> > >> Hi list, > >> > >> has someone out there ever attemted to reuse WatchGuard devices? If so > >> can he point out some hints on how to go about it? > >> We have a few devices laying around here and i dont see the point in not > >> trying to reuse them. > >> > >> Cheers > >> > >> -- > >> Markus Rosjat fon: +49 351 8107224 mail: ros...@ghweb.de > >> > >> G+H Webservice GbR Gorzolla, Herrmann > >> Königsbrücker Str. 70, 01099 Dresden > >> > >> http://www.ghweb.de > >> fon: +49 351 8107220 fax: +49 351 8107227 > >> > >> Bitte prüfen Sie, ob diese Mail wirklich ausgedruckt werden muss! Before > >> you print it, think about your responsibility and commitment to the > >> ENVIRONMENT > >> > -- > Markus Rosjat fon: +49 351 8107224 mail: ros...@ghweb.de > > G+H Webservice GbR Gorzolla, Herrmann > Königsbrücker Str. 70, 01099 Dresden > > http://www.ghweb.de > fon: +49 351 8107220 fax: +49 351 8107227 > > Bitte prüfen Sie, ob diese Mail wirklich ausgedruckt werden muss! Before you > print it, think about your responsibility and commitment to the ENVIRONMENT Hi,
>From what I read, you can use SSD/HDD in these things. So basically, you have >two ways which I think should work: - DD miniroot70.img to hdd, plug hdd in, boot from it, install to same hdd you booted from. You may need to create boot.conf in miniroot70.img to use serial instead of non-existent vga if "boot>" prompt does not show up to do that at boot time. - plug hdd to another computer, install openbsd to it, move hdd to watchguard. The second way I found here: https://www.reddit.com/r/PFSENSE/comments/rce3i6/howto_pfsense_252_on_watchguard_xtm_5/ Let us know how it goes. -- Łukasz Moskała
