My Intel network card, which works under 3.8, is not detected in the
March 2 snapshot (I tried some previous snapshots as well, same issue).
Any hints or suggestions would be appreciated!
Dan Hamlin
OpenBSD 3.8 (GENERIC) #138: Sat Sep 10 15:41:37 MDT 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) 4 CPU 3.40GHz ("GenuineIntel" 686-class) 3.40 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE
,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,CNXT-ID
real mem = 2145529856 (2095244K)
avail mem = 1951735808 (1905992K)
using 4278 buffers containing 107380736 bytes (104864K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 05/02/05, BIOS32 rev. 0 @ 0xffe90
apm0 at bios0: Power Management spec V1.2
apm0: APM get power status: unknown error code? (83)
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfeb00/240 (13 entries)
pcibios0: no compatible PCI ICU found: ICU vendor 0x8086 product 0x2640
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #4 is the last bus
bios0: ROM list: 0xc0000/0xd000 0xcd000/0x2000! 0xcf000/0x1000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 915G/P/GV Host" rev 0x04
ppb0 at pci0 dev 1 function 0 "Intel 915G/P/GV PCIE" rev 0x04
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Radeon X300" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"ATI Radeon X300 Sec" rev 0x00 at pci1 dev 0 function 1 not configured
ppb1 at pci0 dev 28 function 0 "Intel 82801FB PCIE" rev 0x03
pci2 at ppb1 bus 2
uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x03: irq 10
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x03: irq 9
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x03: irq 5
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x03: irq 3
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x03: irq 10
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
ppb2 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xd3
pci3 at ppb2 bus 3
ppb3 at pci3 dev 0 function 0 "Texas Instruments PCI2250 PCI-PCI" rev 0x02
pci4 at ppb3 bus 4
sis0 at pci4 dev 0 function 0 "NS DP83815 10/100" rev 0x00: DP83816A,
irq 11, address 00:00:24:c4:5c:e
c
nsphyter0 at sis0 phy 0: DP83815 10/100 PHY, rev. 1
sis1 at pci4 dev 1 function 0 "NS DP83815 10/100" rev 0x00: DP83816A,
irq 5, address 00:00:24:c4:5c:ed
nsphyter1 at sis1 phy 0: DP83815 10/100 PHY, rev. 1
sis2 at pci4 dev 2 function 0 "NS DP83815 10/100" rev 0x00: DP83816A,
irq 5, address 00:00:24:c4:5c:ee
nsphyter2 at sis2 phy 0: DP83815 10/100 PHY, rev. 1
sis3 at pci4 dev 3 function 0 "NS DP83815 10/100" rev 0x00: DP83816A,
irq 3, address 00:00:24:c4:5c:ef
nsphyter3 at sis3 phy 0: DP83815 10/100 PHY, rev. 1
emu0 at pci3 dev 1 function 0 "Creative Labs SoundBlaster Live" rev
0x07: irq 5
ac97: codec id 0x83847609 (SigmaTel STAC9721/23)
ac97: codec features 18 bit DAC, 18 bit ADC, SigmaTel 3D
audio0 at emu0
"Creative Labs PCI Gameport Joystick" rev 0x07 at pci3 dev 1 function 1
not configured
fxp0 at pci3 dev 8 function 0 "Intel PRO/100 VE (82562EZ)" rev 0x03: irq
9, address 00:13:20:40:15:a6
inphy0 at fxp0 phy 1: i82562ET 10/100 PHY, rev. 0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801FB LPC" rev 0x03: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801FB IDE" rev 0x03: DMA,
channel 0 configured to compatibi
lity, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <SONY, DVD-ROM DDU1615, FDS1> SCSI0
5/cdrom removable
atapiscsi1 at pciide0 channel 0 drive 1
scsibus1 at atapiscsi1: 2 targets
cd1 at scsibus1 targ 0 lun 0: <_NEC, DVD+-RW ND-3530A, 102B> SCSI0
5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
cd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
pciide1 at pci0 dev 31 function 2 "Intel 82801FB SATA" rev 0x03: DMA,
channel 0 configured to native-P
CI, channel 1 configured to native-PCI
pciide1: using irq 9 for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <Maxtor 6Y160M0>
wd0: 16-sector PIO, LBA48, 152587MB, 312500000 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
"Intel 82801FB SMBus" rev 0x03 at pci0 dev 31 function 3 not configured
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask e76d netmask ef6d ttymask ffef
pctr: user-level cycle counter enabled
uhub5 at uhub4 port 4
uhub5: NEC Corporation USB2.0 Hub Controller, rev 2.00/1.00, addr 2
uhub5: 4 ports with 4 removable, self powered, single transaction translator
uhidev0 at uhub1 port 1 configuration 1 interface 0
uhidev0: Logitech USB-PS/2 Optical Mouse, rev 2.00/18.00, addr 2, iclass 3/1
ums0 at uhidev0: 8 buttons and Z dir.
wsmouse1 at ums0 mux 0
uhub6 at uhub4 port 6
uhub6: NEC Corporation USB2.0 Hub Controller, rev 2.00/1.00, addr 3
uhub6: 4 ports with 4 removable, self powered, single transaction translator
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
OpenBSD 3.9 (GENERIC) #617: Thu Mar 2 02:26:48 MST 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) 4 CPU 3.40GHz ("GenuineIntel" 686-class) 3.40 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE
,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,CNXT-ID
real mem = 2145529856 (2095244K)
avail mem = 1951633408 (1905892K)
using 4278 buffers containing 107380736 bytes (104864K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 05/02/05, BIOS32 rev. 0 @ 0xffe90
apm0 at bios0: Power Management spec V1.2
apm0: APM get power status: unknown error code? (83)
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfeb00/240 (13 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801FB LPC" rev 0x00)
pcibios0: PCI bus #4 is the last bus
bios0: ROM list: 0xc0000/0xd000 0xcd000/0x2000! 0xcf000/0x1000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82915G/P/GV Host" rev 0x04
ppb0 at pci0 dev 1 function 0 "Intel 82915G/P/GV PCIE" rev 0x04
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Radeon X300" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"ATI Radeon X300 Sec" rev 0x00 at pci1 dev 0 function 1 not configured
ppb1 at pci0 dev 28 function 0 "Intel 82801FB PCIE" rev 0x03
pci2 at ppb1 bus 2
uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x03: irq 10
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x03: irq 9
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x03: irq 5
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x03: irq 3
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x03: irq 10
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
ppb2 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xd3
pci3 at ppb2 bus 3
ppb3 at pci3 dev 0 function 0 "Texas Instruments PCI2250 PCI-PCI" rev 0x02
pci4 at ppb3 bus 4
sis0 at pci4 dev 0 function 0 "NS DP83815 10/100" rev 0x00, DP83816A:
irq 11, address 00:00:24:c4:5c:e
c
nsphyter0 at sis0 phy 0: DP83815 10/100 PHY, rev. 1
sis1 at pci4 dev 1 function 0 "NS DP83815 10/100" rev 0x00, DP83816A:
irq 5, address 00:00:24:c4:5c:ed
nsphyter1 at sis1 phy 0: DP83815 10/100 PHY, rev. 1
sis2 at pci4 dev 2 function 0 "NS DP83815 10/100" rev 0x00, DP83816A:
irq 5, address 00:00:24:c4:5c:ee
nsphyter2 at sis2 phy 0: DP83815 10/100 PHY, rev. 1
sis3 at pci4 dev 3 function 0 "NS DP83815 10/100" rev 0x00, DP83816A:
irq 3, address 00:00:24:c4:5c:ef
nsphyter3 at sis3 phy 0: DP83815 10/100 PHY, rev. 1
emu0 at pci3 dev 1 function 0 "Creative Labs SoundBlaster Live" rev
0x07: irq 5
ac97: codec id 0x83847609 (SigmaTel STAC9721/23)
ac97: codec features 18 bit DAC, 18 bit ADC, SigmaTel 3D
audio0 at emu0
"Creative Labs PCI Gameport Joystick" rev 0x07 at pci3 dev 1 function 1
not configured
"Intel 82801FB LAN" rev 0x03 at pci3 dev 8 function 0 not configured
ichpcib0 at pci0 dev 31 function 0 "Intel 82801FB LPC" rev 0x03: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801FB IDE" rev 0x03: DMA,
channel 0 configured to compatibi
lity, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <SONY, DVD-ROM DDU1615, FDS1> SCSI0
5/cdrom removable
atapiscsi1 at pciide0 channel 0 drive 1
scsibus1 at atapiscsi1: 2 targets
cd1 at scsibus1 targ 0 lun 0: <_NEC, DVD+-RW ND-3530A, 102B> SCSI0
5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
cd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
pciide1 at pci0 dev 31 function 2 "Intel 82801FB SATA" rev 0x03: DMA,
channel 0 configured to native-P
CI, channel 1 configured to native-PCI
pciide1: using irq 9 for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <Maxtor 6Y160M0>
wd0: 16-sector PIO, LBA48, 152587MB, 312500000 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 "Intel 82801FB SMBus" rev 0x03: irq 5
iic0 at ichiic0
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask e76d netmask ef6d ttymask ffef
pctr: user-level cycle counter enabled
uhub5 at uhub4 port 4
uhub5: NEC Corporation USB2.0 Hub Controller, rev 2.00/1.00, addr 2
uhub5: 4 ports with 4 removable, self powered, single transaction translator
uhub6 at uhub4 port 6
uhub6: NEC Corporation USB2.0 Hub Controller, rev 2.00/1.00, addr 3
uhub6: 4 ports with 4 removable, self powered, single transaction translator
uhidev0 at uhub1 port 1 configuration 1 interface 0
uhidev0: Logitech USB-PS/2 Optical Mouse, rev 2.00/18.00, addr 2, iclass 3/1
ums0 at uhidev0: 8 buttons and Z dir.
wsmouse1 at ums0 mux 0
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
