Hi folks,
after installing syspatch 001 the reboot showed:
:
scsibus3 at softraid0: 256 targets
root on sd0a (614daaae133f0ac5.a) swap on sd0b dump on sd0b
uvm_fault(0xffffffff82186300, 0xb8, 0, 1) -> e
kernel: page fault trap, code=0
Stopped at i915_ggtt_pin+0x29: movq 0xb8(%rdi),%r12
ddb{0}>
ddb{0}> show panic
kernel page fault
uvm_fault(0xffffffff82186300, 0xb8, 0, 1) -> e
i915_ggtt_pin(0,10000,20) at i915_ggtt_pin+0x29
end trace frame: 0xffffffff8252dbf0, count: 0
ddb{0}> trace
i915_ggtt_pin(0,10000,20) at i915_ggtt_pin+0x29
gen6_ppgtt_pin(ffff80000061fc00) at gen6_ppgtt_pin+0x7c
__intel_context_do_pin(fffffd827bfc3c00) at __intel_context_do_pin+0xca
intel_engines_init(ffff80000010bc38) at intel_engines_init+0x4b5
intel_gt_init(ffff80000010bc38) at intel_gt_init+0x130
i915_gem_init(ffff800000107000) at i915_gem_init+0xa3
i915_driver_probe(ffff800000107000,ffffffff81fe0e40) at i915_driver_probe+0x7ed
inteldrm_attachhook(ffff800000107000) at inteldrm_attachhook+0x43
config_process_deferred_mountroot() at config_process_deferred_mountroot+0x6b
main(0) at main+0x733
end trace frame: 0x0, count: -10
ddb{0}> show registers
rdi 0
rsi 0x10000 __ALIGN_SIZE+0xf000
rbp 0xffffffff8252dbb0 end+0x12dbb0
rbx 0xffff800000645340
rdx 0x20
rcx 0xffffffff82185964 proc0+0x4
rax 0
r8 0x11
r9 0xffffffff82046210 rw_ops+0x10
r10 0xffffffffffffffff
r11 0x1b5e3813e69555ca
r12 0xfffffffc
r13 0xfffffffc
r14 0xffff80000061fc00
r15 0x20
rip 0xffffffff8166db89 i915_ggtt_pin+0x29
cs 0x8
rflags 0x10286 __ALIGN_SIZE+0xf286
rsp 0xffffffff8252db50 end+0x12db50
ss 0x10
i915_ggtt_pin+0x29: movq 0xb8(%rdi),%r12
The next reboot got stuck before entering the debugger:
ddb{0}> boot reboot
rebooting...
boot>
NOTE: random seed is being reused.
booting hd0a:/bsd: 14415144+3220488+340000+0+1171456
[1008375+128+1145856+866050]=0x1526a80
entry point at 0xffffffff81001000
[ using 3021440 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2021 OpenBSD. All rights reserved. https://www.OpenBSD.org
OpenBSD 6.9 (GENERIC.MP) #473: Mon Apr 19 10:40:28 MDT 2021
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 8478871552 (8086MB)
avail mem = 8206532608 (7826MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 3.0 @ 0xecef0 (51 entries)
bios0: vendor American Megatrends Inc. version "5.11" date 04/08/2016
bios0: Default string Default string
acpi0 at bios0: ACPI 5.0
acpi0: sleep states S0 S4 S5
acpi0: tables DSDT FACP APIC FPDT FIDT MCFG SSDT SSDT SSDT UEFI LPIT CSRT
acpi0: wakeup devices BRC1(S0) XHC1(S4) HDEF(S4) RP01(S4) PXSX(S4) RP02(S4)
PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) PXSX(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Celeron(R) CPU N3160 @ 1.60GHz, 1600.37 MHz, 06-4c-04
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,RDRAND,NXE,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,TSC_ADJUST,SMEP,ERMS,MD_CLEAR,IBRS,IBPB,STIBP,SENSOR,ARAT,MELTDOWN
cpu0: 1MB 64b/line 16-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 80MHz
cpu0: mwait min=64, max=64, C-substates=0.2.0.0.0.0.3.3, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Celeron(R) CPU N3160 @ 1.60GHz, 1599.95 MHz, 06-4c-04
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,RDRAND,NXE,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,TSC_ADJUST,SMEP,ERMS,MD_CLEAR,IBRS,IBPB,STIBP,SENSOR,ARAT,MELTDOWN
cpu1: 1MB 64b/line 16-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Celeron(R) CPU N3160 @ 1.60GHz, 1599.97 MHz, 06-4c-04
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,RDRAND,NXE,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,TSC_ADJUST,SMEP,ERMS,MD_CLEAR,IBRS,IBPB,STIBP,SENSOR,ARAT,MELTDOWN
cpu2: 1MB 64b/line 16-way L2 cache
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Celeron(R) CPU N3160 @ 1.60GHz, 1599.96 MHz, 06-4c-04
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,RDRAND,NXE,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,TSC_ADJUST,SMEP,ERMS,MD_CLEAR,IBRS,IBPB,STIBP,SENSOR,ARAT,MELTDOWN
cpu3: 1MB 64b/line 16-way L2 cache
cpu3: smt 0, core 3, package 0
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 115 pins
acpimcfg0 at acpi0
acpimcfg0: addr 0xe0000000, bus 0-255
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (RP01)
acpiprt2 at acpi0: bus 2 (RP02)
acpiprt3 at acpi0: bus 3 (RP03)
acpiprt4 at acpi0: bus 4 (RP04)
acpiec0 at acpi0: not present
acpicmos0 at acpi0
acpipci0 at acpi0 PCI0: 0x00000004 0x00000011 0x00000001
"INTCF1C" at acpi0 not configured
acpibtn0 at acpi0: SLPB
"PNP0C0B" at acpi0 not configured
acpicpu0 at acpi0: C1(@1 halt!), PSS
acpicpu1 at acpi0: C1(@1 halt!), PSS
acpicpu2 at acpi0: C1(@1 halt!), PSS
acpicpu3 at acpi0: C1(@1 halt!), PSS
acpipwrres0 at acpi0: ID3C, resource for ISP3
acpipwrres1 at acpi0: CLK0, resource for CAMD
acpipwrres2 at acpi0: CLK0, resource for CAM1
acpipwrres3 at acpi0: CLK1, resource for CAM2, CAM3
acpipwrres4 at acpi0: USBC, resource for XHC1
acpipwrres5 at acpi0: FN00, resource for FAN0
acpitz0 at acpi0: critical temperature is 95 degC
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD1F
cpu0: using VERW MDS workaround
cpu0: Enhanced SpeedStep 1600 MHz: speeds: 1601, 1600, 1520, 1440, 1360, 1280,
1200, 1120, 1040, 960, 880, 800, 720, 640, 560, 480 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Braswell Host" rev 0x35
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics" rev 0x35
drm0 at inteldrm0
inteldrm0: msi, CHERRYVIEW, gen 8
ahci0 at pci0 dev 19 function 0 "Intel Braswell AHCI" rev 0x35: msi, AHCI 1.3.1
ahci0: PHY offline on port 0
ahci0: port 1: 6.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 1 lun 0: <ATA, INTEL SSDSC2CT06, 300i> naa.5001517bb28d2f45
sd0: 57241MB, 512 bytes/sector, 117231408 sectors, thin
xhci0 at pci0 dev 20 function 0 "Intel Braswell xHCI" rev 0x35: msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00
addr 1
"Intel Braswell TXE" rev 0x35 at pci0 dev 26 function 0 not configured
ppb0 at pci0 dev 28 function 0 "Intel Braswell PCIE" rev 0x35: msi
pci1 at ppb0 bus 1
em0 at pci1 dev 0 function 0 "Intel I211" rev 0x03: msi, address
00:60:e0:66:70:d1
ppb1 at pci0 dev 28 function 1 "Intel Braswell PCIE" rev 0x35: msi
pci2 at ppb1 bus 2
em1 at pci2 dev 0 function 0 "Intel I211" rev 0x03: msi, address
00:60:e0:66:70:d2
ppb2 at pci0 dev 28 function 2 "Intel Braswell PCIE" rev 0x35: msi
pci3 at ppb2 bus 3
em2 at pci3 dev 0 function 0 "Intel I211" rev 0x03: msi, address
00:60:e0:66:70:d3
ppb3 at pci0 dev 28 function 3 "Intel Braswell PCIE" rev 0x35: msi
pci4 at ppb3 bus 4
ppb4 at pci4 dev 0 function 0 "Pericom PI7C9X2G404EL PCIE" rev 0x05
pci5 at ppb4 bus 5
ppb5 at pci5 dev 1 function 0 "Pericom PI7C9X2G404EL PCIE" rev 0x05: msi
pci6 at ppb5 bus 6
em3 at pci6 dev 0 function 0 "Intel I211" rev 0x03: msi, address
00:60:e0:66:70:d4
ppb6 at pci5 dev 2 function 0 "Pericom PI7C9X2G404EL PCIE" rev 0x05: msi
pci7 at ppb6 bus 7
em4 at pci7 dev 0 function 0 "Intel I211" rev 0x03: msi, address
00:60:e0:66:70:d5
ppb7 at pci5 dev 3 function 0 "Pericom PI7C9X2G404EL PCIE" rev 0x05: msi
pci8 at ppb7 bus 8
em5 at pci8 dev 0 function 0 "Intel I211" rev 0x03: msi, address
00:60:e0:66:70:d6
pcib0 at pci0 dev 31 function 0 "Intel Braswell PCU LPC" rev 0x35
ichiic0 at pci0 dev 31 function 3 "Intel Braswell SMBus" rev 0x35: apic 1 int 18
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 8GB DDR3 SDRAM PC3-12800 SO-DIMM
isa0 at pcib0
isadma0 at isa0
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
vga0 at isa0 port 0x3b0/48 iomem 0xa0000/131072
wsdisplay at vga0 not configured
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
wbsio0 at isa0 port 0x2e/2: NCT5104D rev 0x52
wbsio0 port 0x290/2 not configured
vmm0 at mainbus0: VMX/EPT (using slow L1TF mitigation)
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (614daaae133f0ac5.a) swap on sd0b dump on sd0b
pan
The previous reboot (without 001) seemed to be OK, but this host
has died before on a reboot. This is the first time I could access
ddb after a panic.
Regard
Harri
