On 3/6/06, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote:
> - Are they suitable to run OpenBSD on them.
Here is a dmesg from a GX620. I can report that everything works
quite well, including X.
OpenBSD 3.9 (GENERIC) #9: Thu Mar 2 09:35:17 MST 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) 4 CPU 2.80GHz ("GenuineIntel" 686-class) 2.80 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,CNXT-ID
real mem = 2137133056 (2087044K)
avail mem = 1943949312 (1898388K)
using 4278 buffers containing 106958848 bytes (104452K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 10/13/05, BIOS32 rev. 0 @ 0xffe90
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfed10/240 (13 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801GH LPC" rev 0x00)
pcibios0: PCI bus #3 is the last bus
bios0: ROM list: 0xc0000/0xa800! 0xca800/0x2000! 0xcc800/0x3800
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945GP" rev 0x02
vga1 at pci0 dev 2 function 0 "Intel 82945G Video" rev 0x02: aperture
at 0xfeb00000, size 0x8000000
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Intel 82945G Video" rev 0x02 at pci0 dev 2 function 1 not configured
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01
pci1 at ppb0 bus 1
bge0 at pci1 dev 0 function 0 "Broadcom BCM5751" rev 0x01, BCM5750 A1
(0x4001): irq 11, address 00:12:3f:bc:0e:ca
brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x01
pci2 at ppb1 bus 2
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: irq 9
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: irq 5
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: irq 3
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: irq 10
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: irq 9
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
ppb2 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xe1
pci3 at ppb2 bus 3
auich0 at pci0 dev 30 function 2 "Intel 82801GB AC97" rev 0x01: irq
10, ICH7 AC97
ac97: codec id 0x41445374 (Analog Devices AD1981B)
ac97: codec features headphone, 20 bit DAC, No 3D Stereo
audio0 at auich0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, CDRW/DVD GCC4244, B101> SCSI0
5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
pciide1 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x01: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: using irq 5 for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <ST380819AS>
wd0: 16-sector PIO, LBA48, 76293MB, 156250000 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: SMI
iic0 at ichiic0
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
biomask f76d netmask ff6d ttymask ffef
pctr: user-level cycle counter enabled
ugen0 at uhub4 port 7
ugen0: DELL Dell Wireless 1450 Dual-band (802.11a/b/g) USB 2.0
Adapter, rev 2.00/10.50, addr 2
uhidev0 at uhub1 port 2 configuration 1 interface 0uhidev1 at uhub2
port 2 configuration 1 interface 0
uhidev0: Dell Dell USB Mouse, rev 2.00/1.10, addr 2, iclass 3/1
uhidev1: CHESEN PS2 to USB Converter, rev 1.10/0.10, addr 2, iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir.
wsmouse0 at ums0 mux 0
ukbd0 at uhidev1: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev2 at uhub2 port 2 configuration 1 interface 1
uhidev2: CHESEN PS2 to USB Converter, rev 1.10/0.10, addr 2, iclass 3/1
uhidev2: 3 report ids
ums1 at uhidev2 reportid 1: 5 buttons and Z dir.
wsmouse1 at ums1 mux 0
uhid0 at uhidev2 reportid 2: input=1, output=0, feature=0
uhid1 at uhidev2 reportid 3: input=3, output=0, feature=0
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
pckbc: cmd failed
pckbc: cmd failed
pckbc: cmd failed
auich0: measured ac97 link rate at 48003 Hz, will use 48000 Hz
-Mark
