I have a SunFire T2000 that I originally installed 6.1 on. I set up LDOMs way back in May 2017. I kept all of the domains up to date until OpenBSD 6.6. After that, LDOMs would no longer work. The system would not boot unless I reverted back to the single domain default using bootmode config="factory-default"
I kind of just forgot about the machine until 6.7 came out. I upgraded, and got the same errors upon trying to boot. I re-generated the LDOM config as outlined in this blog post I wrote: http://www.h-i-r.net/2017/05/logical-domains-on-sunfire-t2000-with.html That is, I dumped the factory-default config, used it as a template for the new LDOM configuration, edited a config file, applied the config to the directory and used ldomctl download to apply the LDOM config before resetting the system. Specifically, the errors I get now (and yes, some are repeats, but it's ALL I get from the console while booting) are: ERROR: /pci@780: Invalid hypervisor argument(s). function: b4 ERROR: /pci@780: Invalid hypervisor argument(s). function: b4 ERROR: /pci@780: Invalid hypervisor argument(s). function: b5 WARNING: /pci@7c0/pci@0/pci@1/network: Missing network-vpd MD node WARNING: /pci@7c0/pci@0/pci@1/network: Missing network-vpd MD node And after that, the system hangs and I must exit to the ALOM system controller prompt to do anything further, such as revert the configuration and reset to make the system able to boot again. I searched and found one other person with this problem a while back ago, but no resolution. I have hardware right here in front of me and I'm not afraid to run -CURRENT and/or test patches to help. I am also willing to provide remote SSH access to the system controller if someone wants to hack on the hardware directly if it would help, though I think there are a few LDOM-capable sparc64 machines in developers' hands already. dmesg: console is /virtual-devices@100/console@1 Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. Copyright (c) 1995-2021 OpenBSD. All rights reserved. https://www.OpenBSD.org OpenBSD 6.9 (GENERIC.MP) #794: Sun Apr 18 12:34:31 MDT 2021 dera...@sparc64.openbsd.org:/usr/src/sys/arch/sparc64/compile/GENERIC.MP real mem = 34225520640 (32640MB) avail mem = 33608228864 (32051MB) random: good seed from bootblocks mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root: Sun Fire T200 cpu0 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1200 MHz cpu1 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1200 MHz cpu2 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1200 MHz cpu3 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1200 MHz cpu4 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1200 MHz cpu5 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1200 MHz cpu6 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1200 MHz cpu7 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1200 MHz cpu8 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1200 MHz cpu9 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1200 MHz cpu10 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1200 MHz cpu11 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1200 MHz cpu12 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1200 MHz cpu13 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1200 MHz cpu14 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1200 MHz cpu15 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1200 MHz cpu16 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1200 MHz cpu17 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1200 MHz cpu18 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1200 MHz cpu19 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1200 MHz cpu20 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1200 MHz cpu21 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1200 MHz cpu22 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1200 MHz cpu23 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1200 MHz cpu24 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1200 MHz cpu25 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1200 MHz cpu26 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1200 MHz cpu27 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1200 MHz cpu28 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1200 MHz cpu29 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1200 MHz cpu30 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1200 MHz cpu31 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1200 MHz vbus0 at mainbus0 "flashprom" at vbus0 not configured cbus0 at vbus0 vldc0 at cbus0 vldcp0 at vldc0 chan 0x0: ivec 0x0, 0x1 channel "hvctl" "ldom-primary" at vldc0 chan 0x1 not configured "fmactl" at vldc0 chan 0x3 not configured vldc1 at cbus0 "ldmfma" at vldc1 chan 0x4 not configured vldc2 at cbus0 vldcp1 at vldc2 chan 0x14: ivec 0x28, 0x29 channel "spds" "system-management" at vldc2 chan 0xd not configured vcons0 at vbus0: ivec 0x111: console vrtc0 at vbus0 "fma" at vbus0 not configured "sunvts" at vbus0 not configured "sunmc" at vbus0 not configured "explorer" at vbus0 not configured "led" at vbus0 not configured "flashupdate" at vbus0 not configured "ncp" at vbus0 not configured vpci0 at mainbus0: bus 2 to 7, dvma map 80000000-ffffffff pci0 at vpci0 ppb0 at pci0 dev 0 function 0 "PLX PEX 8532" rev 0xbc pci1 at ppb0 bus 3 ppb1 at pci1 dev 1 function 0 "PLX PEX 8532" rev 0xbc pci2 at ppb1 bus 4 em0 at pci2 dev 0 function 0 "Intel 82571EB" rev 0x06: ivec 0x795, address 00:14:4f:9d:60:ac em1 at pci2 dev 0 function 1 "Intel 82571EB" rev 0x06: ivec 0x796, address 00:14:4f:9d:60:ad ppb2 at pci1 dev 2 function 0 "PLX PEX 8532" rev 0xbc pci3 at ppb2 bus 5 ppb3 at pci1 dev 8 function 0 "PLX PEX 8532" rev 0xbc: msi pci4 at ppb3 bus 6 ppb4 at pci1 dev 9 function 0 "PLX PEX 8532" rev 0xbc pci5 at ppb4 bus 7 mpi0 at pci5 dev 0 function 0 "Symbios Logic SAS1064E" rev 0x02: msi mpi0: UNUSED, firmware 1.9.0.0 scsibus1 at mpi0: 63 targets sym0 at scsibus1 targ 0 lun 0: <SEAGATE, ST914602SSUN146G, 0400> naa.5000c500061f070b sd0 at scsibus0 targ 0 lun 0: <SEAGATE, ST914602SSUN146G, 0400> naa.5000c500061f070b sd0: 140009MB, 512 bytes/sector, 286739329 sectors sym1 at scsibus1 targ 1 lun 0: <SEAGATE, ST914602SSUN146G, 0400> naa.5000c500061f0d3b sd1 at scsibus0 targ 1 lun 0: <SEAGATE, ST914602SSUN146G, 0400> naa.5000c500061f0d3b sd1: 140009MB, 512 bytes/sector, 286739329 sectors sd2 at scsibus1 targ 2 lun 0: <HITACHI, H101414SCSUN146G, SA23> naa.5000cca0000c2b34 sd2: 140009MB, 512 bytes/sector, 286739329 sectors sym2 at scsibus1 targ 3 lun 0: <SEAGATE, ST914602SSUN146G, 0400> naa.5000c5000546b3ef sd3 at scsibus0 targ 2 lun 0: <SEAGATE, ST914602SSUN146G, 0400> naa.5000c5000546b3ef sd3: 140009MB, 512 bytes/sector, 286739329 sectors vpci1 at mainbus0: bus 2 to 9, dvma map 80000000-ffffffff pci6 at vpci1 ppb5 at pci6 dev 0 function 0 "PLX PEX 8532" rev 0xbc pci7 at ppb5 bus 3 ppb6 at pci7 dev 1 function 0 "PLX PEX 8532" rev 0xbc pci8 at ppb6 bus 4 ppb7 at pci8 dev 0 function 0 "Intel 41210 PCIE-PCIX" rev 0x09 pci9 at ppb7 bus 5 ebus0 at pci9 dev 2 function 0 "Acer Labs M1533 ISA" rev 0x00 com0 at ebus0 addr 3f8-3ff ivec 0x2: ns16550a, 16 byte fifo ohci0 at pci9 dev 5 function 0 "Acer Labs M5237 USB" rev 0x03: ivec 0x7c1, version 1.0, legacy support ohci1 at pci9 dev 6 function 0 "Acer Labs M5237 USB" rev 0x03: ivec 0x7c3, version 1.0, legacy support pciide0 at pci9 dev 8 function 0 "Acer Labs M5229 IDE" rev 0xc4: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI pciide0: using ivec 0x7c4 for native-PCI interrupt atapiscsi0 at pciide0 channel 0 drive 0 scsibus2 at atapiscsi0: 2 targets cd0 at scsibus2 targ 0 lun 0: <TEAC, DV-28SL, 1.0A> removable cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 pciide0: channel 1 disabled (no drives) usb0 at ohci0: USB revision 1.0 uhub0 at usb0 configuration 1 interface 0 "Acer Labs OHCI root hub" rev 1.00/1.00 addr 1 usb1 at ohci1: USB revision 1.0 uhub1 at usb1 configuration 1 interface 0 "Acer Labs OHCI root hub" rev 1.00/1.00 addr 1 ppb8 at pci8 dev 0 function 2 "Intel 41210 PCIE-PCIX" rev 0x09 pci10 at ppb8 bus 6 ppb9 at pci7 dev 2 function 0 "PLX PEX 8532" rev 0xbc pci11 at ppb9 bus 7 em2 at pci11 dev 0 function 0 "Intel 82571EB" rev 0x06: ivec 0x7d6, address 00:14:4f:9d:60:ae em3 at pci11 dev 0 function 1 "Intel 82571EB" rev 0x06: ivec 0x7d7, address 00:14:4f:9d:60:af ppb10 at pci7 dev 8 function 0 "PLX PEX 8532" rev 0xbc: msi pci12 at ppb10 bus 8 ppb11 at pci7 dev 9 function 0 "PLX PEX 8532" rev 0xbc: msi pci13 at ppb11 bus 9 uhub2 at uhub1 port 1 configuration 1 interface 0 "Atmel Standard USB Hub" rev 1.10/3.00 addr 2 vscsi0 at root scsibus3 at vscsi0: 256 targets softraid0 at root scsibus4 at softraid0: 256 targets sd4 at scsibus4 targ 1 lun 0: <OPENBSD, SR RAID 5, 006> sd4: 280018MB, 512 bytes/sector, 573477376 sectors bootpath: /pci@780,0/pci@0,0/pci@9,0/scsi@0,0/disk@0,0 root on sd0a (f8f19189c21ce1c4.a) swap on sd0b dump on sd0b
