Thought I'd try using the Dell and ARC-1200 combination with 6.9-BETA I
mentioned a couple months ago
(https://marc.info/?l=openbsd-misc&m=158259981320518), but still no
luck. Dmesg of both 6.9-BETA and verbose FreeBSD 12.1-RELEASE attached
in case they might be useful. I've also gone backwards to 5.8-RELEASE on
the off chance I could zero in on a change that broke things, but no
luck there, either.
Loading kernel...
/boot/kernel/kernel text=0x16bdcc4 data=0x140 data=0x75fe80 syms=[0x8+0x17e098+0
x8+0x19bdd3]
Loading configured modules...
can't find '/boot/entropy'
can't find '/etc/hostid'
---<<BOOT>>---
APIC: Using the MADT enumerator.
Copyright (c) 1992-2020 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.2-RELEASE r366954 GENERIC amd64
FreeBSD clang version 10.0.1 (g...@github.com:llvm/llvm-project.git
llvmorg-10.0.1-0-gef32c611aa2)
SRAT: Found CPU APIC ID 0 domain 0: enabled
SRAT: Found CPU APIC ID 1 domain 0: enabled
SRAT: Found memory domain 0 addr 0x0 len 0xa0000: enabled
SRAT: Found memory domain 0 addr 0x100000 len 0xdff00000: enabled
SRAT: Found memory domain 0 addr 0x100000000 len 0x320000000: enabled
SRAT: Found CPU APIC ID 2 domain 1: enabled
SRAT: Found CPU APIC ID 3 domain 1: enabled
SRAT: Found memory domain 1 addr 0x0 len 0xa0000: enabled
SRAT: Overlapping memory entries
SRAT: Found memory domain 1 addr 0x100000 len 0xdff00000: enabled
SRAT: Overlapping memory entries
SRAT: Found memory domain 1 addr 0x100000000 len 0x320000000: enabled
SRAT: Overlapping memory entries
PPIM 0: PA=0xa0000, VA=0xffffffff82710000, size=0x10000, mode=0
PPIM 1: PA=0x41ffe7000, VA=0xffffffff82720000, size=0x1000, mode=0x6
pmap: large map 8 PML4 slots (4096 Gb)
VT(vga): resolution 640x480
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff8247b000.
Calibrating TSC clock ... TSC clock: 1995040996 Hz
CPU: Dual-Core AMD Opteron(tm) Processor 2212 (1995.04-MHz K8-class CPU)
Origin="AuthenticAMD" Id=0x40f12 Family=0xf Model=0x41 Stepping=2
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x2001<SSE3,CX16>
AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
AMD Features2=0x1f<LAHF,CMP,SVM,ExtAPIC,CR8>
SVM: Features=0x0
Revision=1, ASIDs=64
L1 2MB data TLB: 8 entries, fully associative
L1 2MB instruction TLB: 8 entries, fully associative
L1 4KB data TLB: 32 entries, fully associative
L1 4KB instruction TLB: 32 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 2MB unified TLB: 0 entries, disabled/not present
L2 4KB data TLB: 512 entries, 4-way associative
L2 4KB instruction TLB: 512 entries, 4-way associative
L2 unified cache: 1024 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative
real memory = 17179869184 (16384 MB)
Physical memory chunk(s):
0x0000000000010000 - 0x000000000009efff, 585728 bytes (143 pages)
0x0000000000103000 - 0x00000000001fffff, 1036288 bytes (253 pages)
0x0000000002700000 - 0x00000000dfed1fff, 3715964928 bytes (907218 pages)
0x00000000dfee6000 - 0x00000000dfee7fff, 8192 bytes (2 pages)
0x0000000100000000 - 0x0000000405bbcfff, 12981096448 bytes (3169213 pages)
avail memory = 16632233984 (15861 MB)
MADT: Found CPU APIC ID 0 ACPI ID 1: enabled
SMP: Added CPU 0 (AP)
MADT: Found CPU APIC ID 2 ACPI ID 2: enabled
SMP: Added CPU 2 (AP)
MADT: Found CPU APIC ID 1 ACPI ID 3: enabled
SMP: Added CPU 1 (AP)
MADT: Found CPU APIC ID 3 ACPI ID 4: enabled
SMP: Added CPU 3 (AP)
MADT: Found CPU APIC ID 20 ACPI ID 5: disabled
MADT: Found CPU APIC ID 21 ACPI ID 6: disabled
MADT: Found CPU APIC ID 22 ACPI ID 7: disabled
MADT: Found CPU APIC ID 23 ACPI ID 8: disabled
Event timer "LAPIC" quality 100
LAPIC: ipi_wait() us multiplier 55 (r 3601315 tsc 1995040996)
ACPI APIC Table: <DELL PE_SC3 >
Package ID shift: 1
L2 cache ID shift: 0
L1 cache ID shift: 0
Core ID shift: 0
INTR: Adding local APIC 1 as a target
INTR: Adding local APIC 2 as a target
INTR: Adding local APIC 3 as a target
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 2 package(s) x 2 core(s)
Package HW ID = 0
Core HW ID = 0
CPU0 (BSP): APIC ID: 0
Core HW ID = 1
CPU1 (AP): APIC ID: 1
Package HW ID = 1
Core HW ID = 2
CPU2 (AP): APIC ID: 2
Core HW ID = 3
CPU3 (AP): APIC ID: 3
APIC: CPU 0 has ACPI ID 1
APIC: CPU 1 has ACPI ID 3
APIC: CPU 2 has ACPI ID 2
APIC: CPU 3 has ACPI ID 4
Pentium Pro MTRR support enabled
x86bios: IVT 0x000000-0x0004ff at 0xfffff80000000000
x86bios: SSEG 0x09e000-0x09efff at 0xfffffe00003a5000
x86bios: EBDA 0x09f000-0x09ffff at 0xfffff8000009f000
x86bios: ROM 0x0a0000-0x0fefff at 0xfffff800000a0000
arc4random: no preloaded entropy cache
VIMAGE (virtualized network stack) enabled
hostuuid: using 00000000-0000-0000-0000-000000000000
ULE: setup cpu 0
ULE: setup cpu 1
ULE: setup cpu 2
ULE: setup cpu 3
ACPI: RSDP 0x00000000000F1E50 000024 (v02 DELL )
ACPI: XSDT 0x00000000000F1EC8 000084 (v01 DELL PE_SC3 00000001 DELL
00000001)
ACPI: FACP 0x00000000000F1FC0 0000F4 (v03 DELL PE_SC3 00000001 DELL
00000001)
ACPI: DSDT 0x00000000DFEE8000 003DC8 (v01 DELL PE_SC3 00000001 INTL
20050624)
ACPI: FACS 0x00000000DFF04C00 000040
ACPI: APIC 0x00000000000F20B4 0000A0 (v01 DELL PE_SC3 00000001 DELL
00000001)
ACPI: SPCR 0x00000000000F2155 000050 (v01 DELL PE_SC3 00000001 DELL
00000001)
ACPI: HPET 0x00000000000F21A5 000038 (v01 DELL PE_SC3 00000001 DELL
00000001)
ACPI: MCFG 0x00000000000F21DD 00003C (v01 DELL PE_SC3 00000001 DELL
00000001)
ACPI: SLIC 0x00000000000F2219 000176 (v01 DELL PE_SC3 00000001 DELL
00000001)
ACPI: ERST 0x00000000DFEEBF48 000210 (v01 DELL PE_SC3 00000001 DELL
00000001)
ACPI: HEST 0x00000000DFEEC158 00027C (v01 DELL PE_SC3 00000001 DELL
00000001)
ACPI: BERT 0x00000000DFEEBDC8 000030 (v01 DELL PE_SC3 00000001 DELL
00000001)
ACPI: EINJ 0x00000000DFEEBDF8 000150 (v01 DELL PE_SC3 00000001 DELL
00000001)
ACPI: SRAT 0x00000000000FC084 000160 (v01 DELL PE_SC3 00000001 DELL
00000001)
ACPI: SSDT 0x00000000DFF05000 000364 (v01 DELL PE_SC3 00000001 DELL
00000001)
MADT: Found IO APIC ID 4, Interrupt 0 at 0xfec00000
ioapic0: MADT APIC ID 4 != hw id 0
ioapic0: ver 0x11 maxredir 0x0f
ioapic0: Routing external 8259A's -> intpin 0
MADT: Found IO APIC ID 5, Interrupt 32 at 0xfec01000
ioapic1: MADT APIC ID 5 != hw id 0
ioapic1: WARNING: intbase 32 != expected base 16
ioapic1: ver 0x11 maxredir 0x0f
MADT: Found IO APIC ID 6, Interrupt 64 at 0xfec02000
ioapic2: MADT APIC ID 6 != hw id 0
ioapic2: WARNING: intbase 64 != expected base 48
ioapic2: ver 0x11 maxredir 0x0f
lapic: Routing NMI -> LINT1
lapic: LINT1 trigger: edge
lapic: LINT1 polarity: high
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0: intpin 9 polarity: low
ioapic0: intpin 9 trigger: level
ioapic0 <Version 1.1> irqs 0-15 on motherboard
ioapic1 <Version 1.1> irqs 32-47 on motherboard
ioapic2 <Version 1.1> irqs 64-79 on motherboard
lapic: Divisor 2, Frequency 99752460 Hz
cpu0 BSP:
ID: 0x00000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
AMD ext features: 0x00010003
AMD elvt0: 0x00010000
SMP: AP CPU #3 Launched!
cpu3 AP:
ID: 0x03000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
AMD ext features: 0x00010003
AMD elvt0: 0x00010000
SMP: AP CPU #1 Launched!
cpu1 AP:
ID: 0x01000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
AMD ext features: 0x00010003
AMD elvt0: 0x00010000
SMP: AP CPU #2 Launched!
cpu2 AP:
ID: 0x02000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
AMD ext features: 0x00010003
AMD elvt0: 0x00010000
Timecounter "TSC" frequency 1995040996 Hz quality -100
wlan: <802.11 Link Layer>
snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024]
feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=2 feeder_rate_min=1
feeder_rate_max=2016000 feeder_rate_round=25
random: entropy device external interface
EFI systbl not available
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
000.000023 [4336] netmap_init netmap: loaded module
null: <full device, null device, zero device>
nfslock: pseudo-device
[ath_hal] loaded
crypto: <crypto core>
module_register_init: MOD_LOAD (vesa, 0xffffffff81115e40, 0) error 19
io: <I/O>
tcp_log: tcp_log device
hpt27xx: RocketRAID 27xx controller driver v1.2.8
hptnr: R750/DC7280 controller driver v1.1.5
hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
crypto: assign cryptosoft0 driver id 0, flags 0x6000000
crypto: cryptosoft0 registers alg 1 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 2 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 3 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 4 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 5 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 16 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 6 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 7 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 32 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 18 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 19 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 20 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 8 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 15 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 9 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 10 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 13 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 14 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 34 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 35 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 36 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 37 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 11 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 22 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 23 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 25 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 24 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 26 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 27 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 28 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 21 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 17 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 29 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 30 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 31 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 40 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 39 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 38 flags 0 maxoplen 0
acpi0: <DELL PE_SC3> on motherboard
ACPI: 2 ACPI AML tables successfully acquired and loaded
PCIe: Memory Mapped configuration base @ 0xf0000000
ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48
acpi0: Power Button (fixed)
acpi0: wakeup code va 0xfffffe000412b000 pa 0x9c000
Firmware Error (ACPI): Could not resolve symbol [\_SB._OSC.CDW1], AE_NOT_FOUND
(20200430/psargs-503)
ACPI Error: Aborting method \_SB._OSC due to previous error (AE_NOT_FOUND)
(20200430/psparse-689)
apei0: <ACPI Platform Error Interface> on acpi0
cpu0: Processor \_PR_.CPU0 (ACPI ID 1) -> APIC ID 0
cpu0: <ACPI CPU> on acpi0
cpu0: switching to generic Cx mode
cpu1: Processor \_PR_.CPU1 (ACPI ID 2) -> APIC ID 2
cpu1: <ACPI CPU> on acpi0
cpu2: Processor \_PR_.CPU2 (ACPI ID 3) -> APIC ID 1
cpu2: <ACPI CPU> on acpi0
cpu3: Processor \_PR_.CPU3 (ACPI ID 4) -> APIC ID 3
cpu3: <ACPI CPU> on acpi0
ACPI: Processor \_PR_.CPU4 (ACPI ID 5) ignored
ACPI: Processor \_PR_.CPU5 (ACPI ID 6) ignored
ACPI: Processor \_PR_.CPU6 (ACPI ID 7) ignored
ACPI: Processor \_PR_.CPU7 (ACPI ID 8) ignored
attimer0: <AT timer> port 0x40-0x5f irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
ioapic0: routing intpin 2 (ISA IRQ 0) to lapic 1 vector 48
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x7f irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 2 vector 48
ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 0 vector 49
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
hpet0: vendor 0x1166, rev 0x1, 14318180Hz 64bit, 3 timers, legacy route
hpet0: t0: irqs 0xffffffff (0), periodic
hpet0: t1: irqs 0xffffffff (0), periodic
hpet0: t2: irqs 0xffffffff (0), periodic
Timecounter "HPET" frequency 14318180 Hz quality 950
ACPI timer: 1/3 1/3 1/3 1/3 1/3 1/3 1/3 1/3 1/2 1/3 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pci_link0: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 3 4 5 6 7 10 11
Validation 0 11 N 0 3 4 5 6 7 10 11
After Disable 0 255 N 0 3 4 5 6 7 10 11
pci_link1: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 3 4 5 6 7 10 11
Validation 0 10 N 0 3 4 5 6 7 10 11
After Disable 0 255 N 0 3 4 5 6 7 10 11
pci_link2: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 10 11
Validation 0 255 N 0 3 4 5 6 7 10 11
After Disable 0 255 N 0 3 4 5 6 7 10 11
pci_link3: Index IRQ Rtd Ref IRQs
Initial Probe 0 5 N 0 3 4 5 6 7 10 11
Validation 0 5 N 0 3 4 5 6 7 10 11
After Disable 0 255 N 0 3 4 5 6 7 10 11
pci_link4: Index IRQ Rtd Ref IRQs
Initial Probe 0 14 N 0 3 4 5 6 7 10 11
Validation 0 255 N 0 3 4 5 6 7 10 11
After Disable 0 255 N 0 3 4 5 6 7 10 11
pci_link5: Index IRQ Rtd Ref IRQs
Initial Probe 0 6 N 0 3 4 5 6 7 10 11
Validation 0 6 N 0 3 4 5 6 7 10 11
After Disable 0 255 N 0 3 4 5 6 7 10 11
pci_link6: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 10 11
Validation 0 255 N 0 3 4 5 6 7 10 11
After Disable 0 255 N 0 3 4 5 6 7 10 11
pci_link7: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 10 11
Validation 0 255 N 0 3 4 5 6 7 10 11
After Disable 0 255 N 0 3 4 5 6 7 10 11
pci_link8: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 10 11
Validation 0 255 N 0 3 4 5 6 7 10 11
After Disable 0 255 N 0 3 4 5 6 7 10 11
pci_link9: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 10 11
Validation 0 255 N 0 3 4 5 6 7 10 11
After Disable 0 255 N 0 3 4 5 6 7 10 11
pci_link10: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 10 11
Validation 0 255 N 0 3 4 5 6 7 10 11
After Disable 0 255 N 0 3 4 5 6 7 10 11
pci_link11: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 10 11
Validation 0 255 N 0 3 4 5 6 7 10 11
After Disable 0 255 N 0 3 4 5 6 7 10 11
pci_link12: Index IRQ Rtd Ref IRQs
Initial Probe 0 14 N 0 3 4 5 6 7 10 11
Validation 0 255 N 0 3 4 5 6 7 10 11
After Disable 0 255 N 0 3 4 5 6 7 10 11
pci_link13: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 10 11
Validation 0 255 N 0 3 4 5 6 7 10 11
After Disable 0 255 N 0 3 4 5 6 7 10 11
pci_link14: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 10 11
Validation 0 255 N 0 3 4 5 6 7 10 11
After Disable 0 255 N 0 3 4 5 6 7 10 11
pci_link15: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 10 11
Validation 0 255 N 0 3 4 5 6 7 10 11
After Disable 0 255 N 0 3 4 5 6 7 10 11
pci_link16: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 10 11
Validation 0 255 N 0 3 4 5 6 7 10 11
After Disable 0 255 N 0 3 4 5 6 7 10 11
pci_link17: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 10 11
Validation 0 255 N 0 3 4 5 6 7 10 11
After Disable 0 255 N 0 3 4 5 6 7 10 11
pci_link18: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 10 11
Validation 0 255 N 0 3 4 5 6 7 10 11
After Disable 0 255 N 0 3 4 5 6 7 10 11
pci_link19: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 10 11
Validation 0 255 N 0 3 4 5 6 7 10 11
After Disable 0 255 N 0 3 4 5 6 7 10 11
pci_link20: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 10 11
Validation 0 255 N 0 3 4 5 6 7 10 11
After Disable 0 255 N 0 3 4 5 6 7 10 11
pci_link21: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 10 11
Validation 0 255 N 0 3 4 5 6 7 10 11
After Disable 0 255 N 0 3 4 5 6 7 10 11
pci_link22: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 10 11
Validation 0 255 N 0 3 4 5 6 7 10 11
After Disable 0 255 N 0 3 4 5 6 7 10 11
pci_link23: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 10 11
Validation 0 255 N 0 3 4 5 6 7 10 11
After Disable 0 255 N 0 3 4 5 6 7 10 11
pci_link24: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 10 11
Validation 0 255 N 0 3 4 5 6 7 10 11
After Disable 0 255 N 0 3 4 5 6 7 10 11
pci_link25: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 10 11
Validation 0 255 N 0 3 4 5 6 7 10 11
After Disable 0 255 N 0 3 4 5 6 7 10 11
pci_link26: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 10 11
Validation 0 255 N 0 3 4 5 6 7 10 11
After Disable 0 255 N 0 3 4 5 6 7 10 11
pci_link27: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 10 11
Validation 0 255 N 0 3 4 5 6 7 10 11
After Disable 0 255 N 0 3 4 5 6 7 10 11
pci_link28: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 10 11
Validation 0 255 N 0 3 4 5 6 7 10 11
After Disable 0 255 N 0 3 4 5 6 7 10 11
pci_link29: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 10 11
Validation 0 255 N 0 3 4 5 6 7 10 11
After Disable 0 255 N 0 3 4 5 6 7 10 11
pci_link30: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 10 11
Validation 0 255 N 0 3 4 5 6 7 10 11
After Disable 0 255 N 0 3 4 5 6 7 10 11
pci_link31: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 10 11
Validation 0 255 N 0 3 4 5 6 7 10 11
After Disable 0 255 N 0 3 4 5 6 7 10 11
pci_link32: Index IRQ Rtd Ref IRQs
Initial Probe 0 15 N 0 3 4 5 6 7 10 11 12 14
Validation 0 255 N 0 3 4 5 6 7 10 11 12 14
After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14
pci_link33: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 3 4 5 6 7 10 11 12 14
Validation 0 11 N 0 3 4 5 6 7 10 11 12 14
After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: decoding 5 range 0-0xfd
pcib0: decoding 4 range 0-0xcf7
pcib0: decoding 4 range 0xd000-0xefff
pcib0: decoding 4 range 0xd00-0xfff
pcib0: decoding 3 range 0xa0000-0xbffff
pcib0: decoding 3 range 0xf0000000-0xf1ffffff
pcib0: decoding 3 range 0xef800000-0xefffffff
pcib0: decoding 3 range 0xe0000000-0xe7ffffff
ACPI: Found matching pin for 0.3.INTA at func 0: 15
pci_link32: BIOS IRQ 15 for 0.3.INTA is invalid
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x1166, dev=0x0036, revid=0x00
domain=0, bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0147, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
secbus=3, subbus=4
found-> vendor=0x1166, dev=0x0205, revid=0x00
domain=0, bus=0, slot=2, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0147, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1166, dev=0x0234, revid=0x00
domain=0, bus=0, slot=2, func=2
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0147, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1166, dev=0x0223, revid=0x01
domain=0, bus=0, slot=3, func=0
class=0c-03-10, hdrtype=0x00, mfdev=1
cmdreg=0x0157, statreg=0x02b0, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=15
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xef8ed000, size 12, enabled
pcib0: allocated type 3 (0xef8ed000-0xef8edfff) for rid 10 of pci0:0:3:0
map[14]: type I/O Port, range 32, base 0xd000, size 8, enabled
pcib0: allocated type 4 (0xd000-0xd0ff) for rid 14 of pci0:0:3:0
pcib0: matched entry for 0.3.INTA (src \_SB_.LK01:0)
pci_link32: Picked IRQ 9 with weight 0
pcib0: slot 3 INTA routed to irq 9 via \_SB_.LK01
ohci early: SMM active, request owner change
found-> vendor=0x1166, dev=0x0223, revid=0x01
domain=0, bus=0, slot=3, func=1
class=0c-03-10, hdrtype=0x00, mfdev=0
cmdreg=0x0157, statreg=0x02b0, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=15
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xef8ee000, size 12, enabled
pcib0: allocated type 3 (0xef8ee000-0xef8eefff) for rid 10 of pci0:0:3:1
map[14]: type I/O Port, range 32, base 0xd400, size 8, enabled
pcib0: allocated type 4 (0xd400-0xd4ff) for rid 14 of pci0:0:3:1
pcib0: matched entry for 0.3.INTA (src \_SB_.LK01:0)
pcib0: slot 3 INTA routed to irq 9 via \_SB_.LK01
found-> vendor=0x1166, dev=0x0223, revid=0x01
domain=0, bus=0, slot=3, func=2
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0157, statreg=0x02b0, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=15
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xef8ef000, size 12, enabled
pcib0: allocated type 3 (0xef8ef000-0xef8effff) for rid 10 of pci0:0:3:2
map[14]: type I/O Port, range 32, base 0xd800, size 8, enabled
pcib0: allocated type 4 (0xd800-0xd8ff) for rid 14 of pci0:0:3:2
pcib0: matched entry for 0.3.INTA (src \_SB_.LK01:0)
pcib0: slot 3 INTA routed to irq 9 via \_SB_.LK01
found-> vendor=0x1002, dev=0x515e, revid=0x02
domain=0, bus=0, slot=4, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0187, statreg=0x0290, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=14
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Prefetchable Memory, range 32, base 0xe0000000, size 27,
enabled
pcib0: allocated type 3 (0xe0000000-0xe7ffffff) for rid 10 of pci0:0:4:0
map[14]: type I/O Port, range 32, base 0xdc00, size 8, enabled
pcib0: allocated type 4 (0xdc00-0xdcff) for rid 14 of pci0:0:4:0
map[18]: type Memory, range 32, base 0xef8f0000, size 16, enabled
pcib0: allocated type 3 (0xef8f0000-0xef8fffff) for rid 18 of pci0:0:4:0
pcib0: matched entry for 0.4.INTA
pcib0: slot 4 INTA hardwired to IRQ 44
found-> vendor=0x1166, dev=0x0140, revid=0xa2
domain=0, bus=0, slot=7, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 3 supports D0 D3 current D0
MSI supports 2 messages, 64 bit
pcib0: matched entry for 0.7.INTA
pcib0: slot 7 INTA hardwired to IRQ 32
secbus=5, subbus=5
found-> vendor=0x1166, dev=0x0142, revid=0xa2
domain=0, bus=0, slot=8, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 3 supports D0 D3 current D0
MSI supports 2 messages, 64 bit
pcib0: matched entry for 0.8.INTA
pcib0: slot 8 INTA hardwired to IRQ 33
secbus=1, subbus=1
found-> vendor=0x1166, dev=0x0144, revid=0xa2
domain=0, bus=0, slot=9, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=6
powerspec 3 supports D0 D3 current D0
MSI supports 2 messages, 64 bit
pcib0: matched entry for 0.9.INTA
pcib0: slot 9 INTA hardwired to IRQ 37
secbus=2, subbus=2
found-> vendor=0x1166, dev=0x0142, revid=0xa2
domain=0, bus=0, slot=10, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 3 supports D0 D3 current D0
MSI supports 2 messages, 64 bit
pcib0: matched entry for 0.10.INTA
pcib0: slot 10 INTA hardwired to IRQ 35
secbus=6, subbus=6
found-> vendor=0x1166, dev=0x0144, revid=0xa2
domain=0, bus=0, slot=11, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=14
powerspec 3 supports D0 D3 current D0
MSI supports 2 messages, 64 bit
pcib0: matched entry for 0.11.INTA
pcib0: slot 11 INTA hardwired to IRQ 36
secbus=7, subbus=7
found-> vendor=0x1022, dev=0x1100, revid=0x00
domain=0, bus=0, slot=24, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1101, revid=0x00
domain=0, bus=0, slot=24, func=1
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1102, revid=0x00
domain=0, bus=0, slot=24, func=2
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1103, revid=0x00
domain=0, bus=0, slot=24, func=3
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1100, revid=0x00
domain=0, bus=0, slot=25, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1101, revid=0x00
domain=0, bus=0, slot=25, func=1
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1102, revid=0x00
domain=0, bus=0, slot=25, func=2
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1103, revid=0x00
domain=0, bus=0, slot=25, func=3
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1: allocating non-ISA range 0xe000-0xe0ff
pcib0: allocated type 4 (0xe000-0xe0ff) for rid 1c of pcib1
pcib1: allocating non-ISA range 0xe400-0xe4ff
pcib0: allocated type 4 (0xe400-0xe4ff) for rid 1c of pcib1
pcib1: allocating non-ISA range 0xe800-0xe8ff
pcib0: allocated type 4 (0xe800-0xe8ff) for rid 1c of pcib1
pcib1: allocating non-ISA range 0xec00-0xecff
pcib0: allocated type 4 (0xec00-0xecff) for rid 1c of pcib1
pcib0: allocated type 3 (0xef900000-0xefafffff) for rid 20 of pcib1
pcib1: domain 0
pcib1: secondary bus 3
pcib1: subordinate bus 4
pcib1: I/O decode 0xe000-0xefff
pcib1: memory decode 0xef900000-0xefafffff
pcib1: special decode ISA
pci1: <ACPI PCI bus> on pcib1
pcib1: allocated bus range (3-3) for rid 0 of pci1
pci1: domain=0, physical bus=3
found-> vendor=0x1166, dev=0x0104, revid=0xc0
domain=0, bus=3, slot=13, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0157, statreg=0x0230, cachelnsz=64 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
secbus=4, subbus=4
pcib1: allocated bus range (4-4) for rid 0 of pci0:3:13:0
pcib2: <ACPI PCI-PCI bridge> at device 13.0 on pci1
pcib2: domain 0
pcib2: secondary bus 4
pcib2: subordinate bus 4
pcib2: special decode ISA
pci2: <ACPI PCI bus> on pcib2
pcib2: allocated bus range (4-4) for rid 0 of pci2
pci2: domain=0, physical bus=4
isab0: <PCI-ISA bridge> at device 2.2 on pci0
isa0: <ISA bus> on isab0
ohci0: <OHCI (generic) USB controller> port 0xd000-0xd0ff mem
0xef8ed000-0xef8edfff irq 9 at device 3.0 on pci0
ohci0: (New OHCI DeviceId=0x02231166)
usbus0 on ohci0
ohci0: usbpf: Attached
usbus0: 12Mbps Full Speed USB v1.0
ohci1: <OHCI (generic) USB controller> port 0xd400-0xd4ff mem
0xef8ee000-0xef8eefff irq 9 at device 3.1 on pci0
ohci1: (New OHCI DeviceId=0x02231166)
usbus1 on ohci1
ohci1: usbpf: Attached
usbus1: 12Mbps Full Speed USB v1.0
ehci0: <EHCI (generic) USB 2.0 controller> port 0xd800-0xd8ff mem
0xef8ef000-0xef8effff irq 9 at device 3.2 on pci0
ehci0: (New EHCI DeviceId=0x02231166)
usbus2: EHCI version 1.0
usbus2 on ehci0
ehci0: usbpf: Attached
usbus2: 480Mbps High Speed USB v2.0
vgapci0: <VGA-compatible display> port 0xdc00-0xdcff mem
0xe0000000-0xe7ffffff,0xef8f0000-0xef8fffff irq 44 at device 4.0 on pci0
vgapci0: Boot video device
pcib3: <ACPI PCI-PCI bridge> irq 32 at device 7.0 on pci0
pcib3: domain 0
pcib3: secondary bus 5
pcib3: subordinate bus 5
pcib3: special decode ISA
ACPI Warning: \_SB.PCI0.EXB0._PRT: Return Package has no elements (empty)
(20200430/nsprepkg-251)
pci3: <ACPI PCI bus> on pcib3
pcib3: allocated bus range (5-5) for rid 0 of pci3
pci3: domain=0, physical bus=5
pcib4: <ACPI PCI-PCI bridge> irq 33 at device 8.0 on pci0
pcib0: allocated type 3 (0xefb00000-0xefbfffff) for rid 20 of pcib4
pcib4: domain 0
pcib4: secondary bus 1
pcib4: subordinate bus 1
pcib4: memory decode 0xefb00000-0xefbfffff
pcib4: special decode ISA
pci4: <ACPI PCI bus> on pcib4
pcib4: allocated bus range (1-1) for rid 0 of pci4
pci4: domain=0, physical bus=1
found-> vendor=0x14e4, dev=0x1659, revid=0x21
domain=0, bus=1, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
MSI supports 8 messages, 64 bit
map[10]: type Memory, range 64, base 0xefbf0000, size 16, enabled
pcib4: allocated memory range (0xefbf0000-0xefbfffff) for rid 10 of pci0:1:0:0
pcib4: matched entry for 1.0.INTA
pcib4: slot 0 INTA hardwired to IRQ 33
bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x004201> mem
0xefbf0000-0xefbfffff irq 33 at device 0.0 on pci4
bge0: attempting to allocate 1 MSI vectors (8 supported)
msi: routing MSI IRQ 256 to local APIC 3 vector 48
bge0: using IRQ 256 for MSI
bge0: CHIP ID 0x00004201; ASIC REV 0x04; CHIP REV 0x42; PCI-E
miibus0: <MII bus> on bge0
brgphy0: <BCM5750 1000BASE-T media interface> PHY 1 on miibus0
brgphy0: OUI 0x001018, model 0x0018, rev. 0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge0: bpf attached
bge0: Ethernet address: 00:18:8b:75:37:ad
pcib5: <ACPI PCI-PCI bridge> irq 37 at device 9.0 on pci0
pcib0: allocated type 3 (0xefc00000-0xefcfffff) for rid 20 of pcib5
pcib5: domain 0
pcib5: secondary bus 2
pcib5: subordinate bus 2
pcib5: memory decode 0xefc00000-0xefcfffff
pcib5: special decode ISA
pci5: <ACPI PCI bus> on pcib5
pcib5: allocated bus range (2-2) for rid 0 of pci5
pci5: domain=0, physical bus=2
found-> vendor=0x14e4, dev=0x1659, revid=0x21
domain=0, bus=2, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=6
powerspec 2 supports D0 D3 current D0
MSI supports 8 messages, 64 bit
map[10]: type Memory, range 64, base 0xefcf0000, size 16, enabled
pcib5: allocated memory range (0xefcf0000-0xefcfffff) for rid 10 of pci0:2:0:0
pcib5: matched entry for 2.0.INTA
pcib5: slot 0 INTA hardwired to IRQ 37
bge1: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x004201> mem
0xefcf0000-0xefcfffff irq 37 at device 0.0 on pci5
bge1: attempting to allocate 1 MSI vectors (8 supported)
msi: routing MSI IRQ 257 to local APIC 0 vector 50
bge1: using IRQ 257 for MSI
bge1: CHIP ID 0x00004201; ASIC REV 0x04; CHIP REV 0x42; PCI-E
miibus1: <MII bus> on bge1
brgphy1: <BCM5750 1000BASE-T media interface> PHY 1 on miibus1
brgphy1: OUI 0x001018, model 0x0018, rev. 0
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge1: bpf attached
bge1: Ethernet address: 00:18:8b:75:37:ae
pcib6: <ACPI PCI-PCI bridge> irq 35 at device 10.0 on pci0
pcib0: allocated type 3 (0xefd00000-0xefffffff) for rid 20 of pcib6
pcib6: domain 0
pcib6: secondary bus 6
pcib6: subordinate bus 6
pcib6: memory decode 0xefd00000-0xefffffff
pcib6: special decode ISA
pci6: <ACPI PCI bus> on pcib6
pcib6: allocated bus range (6-6) for rid 0 of pci6
pci6: domain=0, physical bus=6
found-> vendor=0x17d3, dev=0x1201, revid=0x00
domain=0, bus=6, slot=0, func=0
class=01-04-00, hdrtype=0x00, mfdev=0
cmdreg=0x0047, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 64, base 0xeff00000, size 20, enabled
pcib6: allocated memory range (0xeff00000-0xefffffff) for rid 10 of pci0:6:0:0
map[18]: type Memory, range 64, base 0xefee0000, size 16, enabled
pcib6: allocated memory range (0xefee0000-0xefeeffff) for rid 18 of pci0:6:0:0
map[20]: type Memory, range 64, base 0xefef0000, size 16, enabled
pcib6: allocated memory range (0xefef0000-0xefefffff) for rid 20 of pci0:6:0:0
pcib6: matched entry for 6.0.INTA
pcib6: slot 0 INTA hardwired to IRQ 35
arcmsr0: <Areca SATA 3G Host Adapter RAID Controller
arcmsr version 1.40.00.01 2017-10-30
> mem 0xeff00000-0xefffffff,0xefee0000-0xefeeffff,0xefef0000-0xefefffff irq 35
> at device 0.0 on pci6
Areca RAID adapter0: ARC-1200 F/W version V1.51 2014-07-21
ioapic1: routing intpin 3 (PCI IRQ 35) to lapic 1 vector 49
pcib7: <ACPI PCI-PCI bridge> irq 36 at device 11.0 on pci0
pcib7: domain 0
pcib7: secondary bus 7
pcib7: subordinate bus 7
pcib7: special decode ISA
ACPI Warning: \_SB.PCI0.EXB4._PRT: Return Package has no elements (empty)
(20200430/nsprepkg-251)
pci7: <ACPI PCI bus> on pcib7
pcib7: allocated bus range (7-7) for rid 0 of pci7
pci7: domain=0, physical bus=7
WÉÑÁ: console (9600,n,8,1)> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 2 vector 48
uart0: fast interrupt
uart0: PPS capture mode: DCD
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
ioapic0: routing intpin 3 (ISA IRQ 3) to lapic 3 vector 49
uart1: fast interrupt
uart1: PPS capture mode: DCD
ACPI: Enabled 1 GPEs in block 20 to 3F
ahc_isa_identify 0: ioport 0xc00 alloc failed
ahc_isa_identify 1: ioport 0x1c00 alloc failed
ahc_isa_identify 2: ioport 0x2c00 alloc failed
ahc_isa_identify 3: ioport 0x3c00 alloc failed
ahc_isa_identify 4: ioport 0x4c00 alloc failed
ahc_isa_identify 5: ioport 0x5c00 alloc failed
ahc_isa_identify 6: ioport 0x6c00 alloc failed
ahc_isa_identify 7: ioport 0x7c00 alloc failed
ahc_isa_identify 8: ioport 0x8c00 alloc failed
ahc_isa_identify 9: ioport 0x9c00 alloc failed
ahc_isa_identify 10: ioport 0xac00 alloc failed
ahc_isa_identify 11: ioport 0xbc00 alloc failed
ahc_isa_identify 12: ioport 0xcc00 alloc failed
ahc_isa_identify 13: ioport 0xdc00 alloc failed
ahc_isa_identify 14: ioport 0xec00 alloc failed
pcib0: allocated type 3 (0xb0000-0xb07ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb0800-0xb0fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb1000-0xb17ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb1800-0xb1fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb2000-0xb27ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb2800-0xb2fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb3000-0xb37ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb3800-0xb3fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb4000-0xb47ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb4800-0xb4fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb5000-0xb57ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb5800-0xb5fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb6000-0xb67ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb6800-0xb6fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb7000-0xb77ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb7800-0xb7fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb8000-0xb87ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb8800-0xb8fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb9000-0xb97ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb9800-0xb9fff) for rid 0 of orm0
pcib0: allocated type 3 (0xba000-0xba7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xba800-0xbafff) for rid 0 of orm0
pcib0: allocated type 3 (0xbb000-0xbb7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbb800-0xbbfff) for rid 0 of orm0
pcib0: allocated type 3 (0xbc000-0xbc7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbc800-0xbcfff) for rid 0 of orm0
pcib0: allocated type 3 (0xbd000-0xbd7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbd800-0xbdfff) for rid 0 of orm0
pcib0: allocated type 3 (0xbe000-0xbe7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbe800-0xbefff) for rid 0 of orm0
pcib0: allocated type 3 (0xbf000-0xbf7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbf800-0xbffff) for rid 0 of orm0
isa_probe_children: disabling PnP devices
atrtc: atrtc0 already exists; skipping it
attimer: attimer0 already exists; skipping it
sc: sc0 already exists; skipping it
uart: uart0 already exists; skipping it
uart: uart1 already exists; skipping it
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc8fff,0xec000-0xeffff pnpid ORM0000
on isa0
sc0 failed to probe on isa0
vga0 failed to probe on isa0
pcib0: allocated type 4 (0x60-0x60) for rid 0 of atkbdc0
pcib0: allocated type 4 (0x64-0x64) for rid 1 of atkbdc0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
pcib0: allocated type 4 (0x60-0x60) for rid 0 of atkbdc0
pcib0: allocated type 4 (0x64-0x64) for rid 1 of atkbdc0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0xffffffff (1)
kbdc: RESET_KBD return code:00fe
kbdc: RESET_KBD return code:00fe
kbdc: RESET_KBD return code:00fe
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
atkbd: failed to reset the keyboard.
kbd0 at atkbd0
kbd0: atkbd0, AT 84 (1), config:0x0, flags:0x1d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 51
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12.
pcib0: allocated type 4 (0x3f0-0x3f5) for rid 0 of fdc0
pcib0: allocated type 4 (0x3f7-0x3f7) for rid 1 of fdc0
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
ppc0: cannot reserve I/O port range
ppc0 failed to probe at irq 7 on isa0
isa_probe_children: probing PnP devices
AcpiOsExecute: task queue not started
AcpiOsExecute: task queue not started
AcpiOsExecute: task queue not started
AcpiOsExecute: task queue not started
powernow0: <PowerNow! K8> on cpu0
powernow1: <PowerNow! K8> on cpu1
powernow2: <PowerNow! K8> on cpu2
powernow3: <PowerNow! K8> on cpu3
Device configuration finished.
procfs registered
Timecounters tick every 1.000 msec
lo0: bpf attached
vlan: initialized, using hash tables with chaining
IPsec: Initialized Security Association Processing.
tcp_init: net.inet.tcp.tcbhashsize auto tuned to 131072
AcpiOsExecute: enqueue 4 pending tasks
hpt27xx: no controller detected.
hptnr: no controller detected.
hptrr: no controller detected.
arc4random: no preloaded entropy cache
ugen2.1: <(0x1166) EHCI root HUB> at usbus2
ugen0.1: <(0x1166) OHCI root HUB> at usbus0
ugen1.1: <(0x1166) OHCI root HUB> at usbus1
uhub0: <(0x1166) EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
uhub1: <(0x1166) OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
uhub2: <(0x1166) OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
Trying to mount root from cd9660:/dev/iso9660/12_2_RELEASE_AMD64_DVD [ro]...
Root mount waiting for: usbus0 usbus1 usbus2 CAM
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
pass0 at arcmsr0 bus 0 scbus0 target 0 lun 0
pass0: <Areca ARC-1200-VOL#00 R001> Fixed Direct Access SPC-3 SCSI device
pass0: Serial Number 0000002539932138
pass0: 250.000MB/s transfers (125.000MHz, offset 32, 16bit)
pass0: Command Queueing enabled
pass1 at arcmsr0 bus 0 scbus0 target 16 lun 0
pass1: <Areca RAID controller R001> Fixed Processor SCSI device
GEOM: new disk da0
da0 at arcmsr0 bus 0 scbus0 target 0 lun 0
da0: <Areca ARC-1200-VOL#00 R001> Fixed Direct Access SPC-3 SCSI device
da0: Serial Number 0000002539932138
da0: 250.000MB/s transfers (125.000MHz, offset 32, 16bit)
da0: Command Queueing enabled
da0: 953869MB (1953524224 512 byte sectors)
da0: Delete methods: <NONE(*),ZERO>
uhub0: 4 ports with 4 removable, self powered
Root mount waiting for: usbus2
ugen0.2: <Dell Dell USB Keyboard> at usbus0
ukbd0 on uhub2
ukbd0: <Dell Dell USB Keyboard, class 0/0, rev 1.10/3.01, addr 2> on usbus0
kbd2 at ukbd0
kbd2: ukbd0, generic (0), config:0x0, flags:0x3d0000
Root mount waiting for: usbus2
ugen2.2: <vendor 0x413c product 0xa001> at usbus2
uhub3 on uhub0
uhub3: <vendor 0x413c product 0xa001, class 9/0, rev 2.00/0.00, addr 2> on
usbus2
uhub3: MTT enabled
uhub3: 2 ports with 2 removable, self powered
Root mount waiting for: usbus2
Root mount waiting for: usbus2
ugen2.3: <TSST Inc SES084D> at usbus2
umass0 on uhub3
umass0: <6238--Storage> on usbus2
umass0: 8070i (ATAPI) over Bulk-Only; quirks = 0x0100
umass0:1:0: Attached to scbus1
(probe0:umass-sim0:0:0:0): Down reving Protocol Version from 2 to 0?
GEOM: new disk cd0
pass2 at umass-sim0 bus 0 scbus1 target 0 lun 0
pass2: <ASUS SDRW-08D2S-U F101> Removable CD-ROM SCSI device
pass2: 40.000MB/s transfers
cd0 at umass-sim0 bus 0 scbus1 target 0 lun 0
cd0: <ASUS SDRW-08D2S-U F101> Removable CD-ROM SCSI device
cd0: 40.000MB/s transfers
cd0: 4482MB (2295104 2048 byte sectors)
cd0: quirks=0x10<10_BYTE_ONLY>
ugen0.3: <vendor 0x0000 USB OPTICAL MOUSE> at usbus0
mountroot: waiting for device /dev/iso9660/12_2_RELEASE_AMD64_DVD...
cd9660: RockRidge Extension
atrtc0: providing initial system time
start_init: trying /sbin/init
booting hd0a:/6.9/amd64/bsd.rd: 3814093+1582080+3882456+0+704512
[109+288+28]=0x987530
entry point at 0xffffffff81001000
Copyright (c) 1982, 1986, 1989, 1991, 1993
- The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2021 OpenBSD. All rights reserved. https://www.OpenBSD.org
OpenBSD 6.9-beta (RAMDISK_CD) #321: Mon Feb 15 02:19:42 MST 2021
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
real mem = 17161854976 (16366MB)
avail mem = 16637714432 (15866MB)
random: good seed from bootblocks
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xdffbc000 (50 entries)
bios0: vendor Dell Inc. version "2.2.5" date 03/21/2008
bios0: Dell Inc. PowerEdge SC1435
acpi0 at bios0: ACPI 3.0
acpi0: tables DSDT FACP APIC SPCR HPET MCFG SLIC ERST HEST BERT EINJ SRAT SSDT
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Dual-Core AMD Opteron(tm) Processor 2212, 1995.28 MHz, 0f-41-02
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,NXE,MMXX,FFXSR,RDTSCP,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB 64b/line
16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: apic clock running at 199MHz
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 11, 16 pins, remapped
ioapic1 at mainbus0: apid 5 pa 0xfec01000, version 11, 16 pins, remapped
ioapic2 at mainbus0: apid 6 pa 0xfec02000, version 11, 16 pins, remapped
acpihpet0 at acpi0: 14318180 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
Invalid device
Invalid device
Invalid device
Invalid device
acpiprt1 at acpi0: bus 3 (PXB_)
acpiprt2 at acpi0: bus 4 (PPBX)
acpiprt3 at acpi0: bus 5 (EXB0)
acpiprt4 at acpi0: bus 1 (EXB1)
acpiprt5 at acpi0: bus 2 (EXB2)
acpiprt6 at acpi0: bus 6 (EXB3)
acpiprt7 at acpi0: bus 7 (EXB4)
acpipci0 at acpi0 PCI0: 0x00000010 0x00000011 0x00000000
acpicmos0 at acpi0
acpicpu at acpi0 not configured
pci0 at mainbus0 bus 0
ppb0 at pci0 dev 1 function 0 "ServerWorks HT-1000 PCI" rev 0x00
pci1 at ppb0 bus 3
ppb1 at pci1 dev 13 function 0 "ServerWorks HT-1000 PCIX" rev 0xc0
pci2 at ppb1 bus 4
pchb0 at pci0 dev 2 function 0 "ServerWorks HT-1000" rev 0x00
"ServerWorks HT-1000 LPC" rev 0x00 at pci0 dev 2 function 2 not configured
ohci0 at pci0 dev 3 function 0 "ServerWorks HT-1000 USB" rev 0x01: apic 4 int
15, version 1.0, legacy support
ohci1 at pci0 dev 3 function 1 "ServerWorks HT-1000 USB" rev 0x01: apic 4 int
15, version 1.0, legacy support
ehci0 at pci0 dev 3 function 2 "ServerWorks HT-1000 USB" rev 0x01: apic 4 int 15
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "ServerWorks EHCI root hub" rev
2.00/1.00 addr 1
vga1 at pci0 dev 4 function 0 "ATI ES1000" rev 0x02
wsdisplay1 at vga1 mux 1
wsdisplay1: screen 0 added (80x25, vt100 emulation)
ppb2 at pci0 dev 7 function 0 "ServerWorks HT-2100 PCIE" rev 0xa2
pci3 at ppb2 bus 5
ppb3 at pci0 dev 8 function 0 "ServerWorks HT-2100 PCIE" rev 0xa2
pci4 at ppb3 bus 1
bge0 at pci4 dev 0 function 0 "Broadcom BCM5721" rev 0x21, BCM5750 C1 (0x4201):
msi, address 00:18:8b:75:37:ad
brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb4 at pci0 dev 9 function 0 "ServerWorks HT-2100 PCIE" rev 0xa2
pci5 at ppb4 bus 2
bge1 at pci5 dev 0 function 0 "Broadcom BCM5721" rev 0x21, BCM5750 C1 (0x4201):
msi, address 00:18:8b:75:37:ae
brgphy1 at bge1 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb5 at pci0 dev 10 function 0 "ServerWorks HT-2100 PCIE" rev 0xa2: msi
pci6 at ppb5 bus 6
arc0 at pci6 dev 0 function 0 "Areca ARC-1200B" rev 0x00: apic 5 int 3
uvm_fault(0xffffffff818e26f8, 0x10, 0, 1) -> e
fatal page fault in supervisor mode
trap type 6 code 0 rip ffffffff8123c478 cs 8 rflags 10202 cr2 10 cpl e rsp
ffffffff81a06810
gsbase 0xffffffff818cdff0 kgsbase 0x0
panic: trap type 6, code=0, pc=ffffffff8123c478
The operating system has halted.
Please press any key to reboot.
