Hi,
I'm trying to setup OSPF on a working Wireguard VPN using 6.8 amd64
machines. This is what I get:
# ospfd -dvvv
id = "172.26.1.1"
startup
kr_init: priority filter enabled
orig_rtr_lsa: area 0.0.0.0
orig_rtr_lsa: stub net, interface wg0
if_fsm: event UP resulted in action START and changing state for
interface wg0 from DOWN to P2P
send_packet: error sending packet to 224.0.0.5 on interface wg0: Network
is unreachable
send_hello: Network is unreachable
[...]
# ifconfig wg0
wg0: flags=80c3<UP,BROADCAST,RUNNING,NOARP,MULTICAST> mtu 1420
index 23 priority 0 llprio 3
wgport 33222
wgpubkey XXX
wgpeer YYY
wgpka 23 (sec)
wgendpoint A.B.C.D 31502
tx: 4317366604, rx: 382870060
last handshake: 47 seconds ago
wgaip 192.168.1.0/24
wgaip 172.26.1.3/32
wgpeer WWW
wgpka 23 (sec)
wgendpoint E.F.G.H 15776
tx: 609183380, rx: 1523684
last handshake: 1 seconds ago
wgaip 172.26.0.0/24
wgaip 172.26.1.2/32
groups: wg
inet 172.26.1.1 netmask 0xffffff00 broadcast 172.26.1.255
Is it possible to use a wg(4) interface for ospfd(8)?
Thank you,
Best.
--
Olivier Cherrier
Phone: +352691570680
mailto:o...@symacx.com
