Hi everyone, I am trying to set up a ldom on a sun t5120 machine running
sparc64 6.8. This did work fine on 6.5. The problem I'm having is that once
the machine is reset to use the openbsd bootmode the machine hangs and
asks for the root device. If one tries to answer this I get no way of
entering
sda which is the root device. Here is the ldom.conf file, the boot sequence
with the hang and the factory-default dmesg. Can someone point me in the
right direction on how to fix this so that I can install multiple ldom's?
Does anyone know why it's not finding ( how to make it find ) the bootpath?
Kind regards John
t5120-14# cat ldom.conf
domain "primary" {
memory 8G
}
domain "puffy" {
vcpu 12
memory 4G
vdisk "/alt/vm/puffy/vdisk0"
vdisk "/alt/vm/puffy/vdisk1"
vnet
}
Here is the boot sequence with the hang:-
sc>
sc> bootmode config="openbsd"
sc> reset -c
Are you sure you want to reset the system (y/n)? y
Reset | major: Reset of /SYS initiated by admin.
Reset | major: Reset of /SYS by admin succeeded.
Performing reset on the system
Chassis | critical: Host has been reset
Enter #. to return to ALOM.
Chassis | major: Host is running
SPARC Enterprise T5120, Keyboard Present
Copyright (c) 1998, 2012, Oracle and/or its affiliates. All rights reserved.
OpenBoot 4.33.6.b, 8192 MB memory available, Serial #85459110.
Ethernet address 0:21:28:18:0:a6, Host ID: 851800a6.
Boot device: disk File and args:
OpenBSD IEEE 1275 Bootblock 2.1
..>> OpenBSD BOOT 1.20
ERROR: /iscsi-hba: No iscsi-network-bootpath property
Trying bsd...
Booting /pci@0/pci@0/pci@2/scsi@0/disk@0,0:a/bsd
10005840@0x1000000+4784@0x198ad50+194164@0x1c00000+4000140@0x1c2f674
symbols @ 0xfea06400 480588+165+642336+443753 start=0x1000000
[ using 1567880 bytes of bsd ELF symbol table ]
console is /virtual-devices@100/console@1
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2020 OpenBSD. All rights reserved.
https://www.OpenBSD.org
OpenBSD 6.8 (GENERIC.MP) #490: Sun Oct 4 20:52:40 MDT 2020
dera...@sparc64.openbsd.org:/usr/src/sys/arch/sparc64/compile/GENERIC.MP
real mem = 8589934592 (8192MB)
avail mem = 8412905472 (8023MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root: SPARC Enterprise T5120
cpu0 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu1 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu2 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu3 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu4 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu5 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu6 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu7 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu8 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu9 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu10 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu11 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu12 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu13 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu14 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu15 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu16 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu17 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu18 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu19 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu20 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu21 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu22 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu23 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu24 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu25 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu26 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu27 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu28 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu29 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu30 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu31 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu32 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu33 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu34 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu35 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu36 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu37 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu38 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu39 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu40 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu41 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu42 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu43 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu44 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu45 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu46 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu47 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu48 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu49 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu50 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu51 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
vbus0 at mainbus0
"flashprom" at vbus0 not configured
"tpm" at vbus0 not configured
cbus0 at vbus0
vldc0 at cbus0
vldcp0 at vldc0 chan 0x14: ivec 0x28, 0x29 channel "spds"
"sunvts" at vldc0 chan 0x6 not configured
"sunmc" at vldc0 chan 0x7 not configured
"explorer" at vldc0 chan 0x8 not configured
"led" at vldc0 chan 0x9 not configured
"flashupdate" at vldc0 chan 0xa not configured
"ipmi" at vldc0 chan 0xc not configured
"system-management" at vldc0 chan 0xd not configured
vldc1 at cbus0
"spfma" at vldc1 chan 0x5 not configured
vldc2 at cbus0
vldcp1 at vldc2 chan 0x0: ivec 0x0, 0x1 channel "hvctl"
"ldom-primary" at vldc2 chan 0x1 not configured
"fmactl" at vldc2 chan 0x3 not configured
vldcp2 at vldc2 chan 0x19: ivec 0x32, 0x33 channel "ldom-puffy"
vldc3 at cbus0
"ldmfma" at vldc3 chan 0x4 not configured
"virtual-domain-service" at cbus0 not configured
vcc0 at cbus0
vcctty0 at vcc0 chan 0x18: ivec 0x30, 0x31 domain "puffy"
vds0 at cbus0
vdsp0 at vds0 chan 0x1a: ivec 0x34, 0x35
vdsp1 at vds0 chan 0x1b: ivec 0x36, 0x37
vsw0 at cbus0
vnet0 at vsw0 chan 0x1c: ivec 0x38, 0x39
vrng0 at vbus0
vcons0 at vbus0: ivec 0x111: console
vrtc0 at vbus0
vpci0 at mainbus0: bus 2 to 18, dvma map 80000000-ffffffff
pci0 at vpci0
ppb0 at pci0 dev 0 function 0 "PLX PEX 8533" rev 0xaa
pci1 at ppb0 bus 3
ppb1 at pci1 dev 1 function 0 "PLX PEX 8533" rev 0xaa
pci2 at ppb1 bus 4
ppb2 at pci2 dev 0 function 0 "PLX PEX 8517" rev 0xac
pci3 at ppb2 bus 5
ppb3 at pci3 dev 1 function 0 "PLX PEX 8517" rev 0xac
pci4 at ppb3 bus 6
ppb4 at pci4 dev 0 function 0 "PLX PEX 8112" rev 0xaa
pci5 at ppb4 bus 7
ohci0 at pci5 dev 0 function 0 "NEC USB" rev 0x43: ivec 0x16, version 1.0
ohci1 at pci5 dev 0 function 1 "NEC USB" rev 0x43: ivec 0x17, version 1.0
ehci0 at pci5 dev 0 function 2 "NEC USB" rev 0x04: ivec 0x14
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "NEC EHCI root hub" rev 2.00/1.00
addr 1
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 configuration 1 interface 0 "NEC OHCI root hub" rev 1.00/1.00
addr 1
usb2 at ohci1: USB revision 1.0
uhub2 at usb2 configuration 1 interface 0 "NEC OHCI root hub" rev 1.00/1.00
addr 1
ppb5 at pci3 dev 2 function 0 "PLX PEX 8517" rev 0xac
pci6 at ppb5 bus 8
em0 at pci6 dev 0 function 0 "Intel 82571EB" rev 0x06: ivec 0x17, address
00:21:28:18:00:a6
em1 at pci6 dev 0 function 1 "Intel 82571EB" rev 0x06: ivec 0x14, address
00:21:28:18:00:a7
ppb6 at pci3 dev 3 function 0 "PLX PEX 8517" rev 0xaa
pci7 at ppb6 bus 9
em2 at pci7 dev 0 function 0 "Intel 82571EB" rev 0x06: ivec 0x14, address
00:21:28:18:00:a8
em3 at pci7 dev 0 function 1 "Intel 82571EB" rev 0x06: ivec 0x15, address
00:21:28:18:00:a9
ppb7 at pci1 dev 2 function 0 "PLX PEX 8533" rev 0xaa
pci8 at ppb7 bus 10
mpi0 at pci8 dev 0 function 0 "Symbios Logic SAS1068E" rev
0x04vpci_intr_establish_cpu: pci_msi_setmsiq: err 6
: unable to map interrupt at msi
ppb8 at pci1 dev 8 function 0 "PLX PEX 8533" rev 0xaa
pci9 at ppb8 bus 11
ppb9 at pci9 dev 0 function 0 "PLX PEX 8533" rev 0xaa
pci10 at ppb9 bus 12
ppb10 at pci10 dev 1 function 0 "PLX PEX 8533" rev
0xaavpci_intr_establish_cpu: pci_msi_setmsiq: err 6
pci11 at ppb10 bus 13
radeondrm0 at pci11 dev 0 function 0 "ATI FireGL V3100" rev 0x80
drm0 at radeondrm0
radeondrm0: ivec 0x15
ppb11 at pci10 dev 2 function 0 "PLX PEX 8533" rev
0xaavpci_intr_establish_cpu: pci_msi_setmsiq: err 6
pci12 at ppb11 bus 14
ppb12 at pci10 dev 8 function 0 "PLX PEX 8533" rev
0xaavpci_intr_establish_cpu: pci_msi_setmsiq: err 6
pci13 at ppb12 bus 15
ppb13 at pci10 dev 9 function 0 "PLX PEX 8533" rev
0xaavpci_intr_establish_cpu: pci_msi_setmsiq: err 6
pci14 at ppb13 bus 16
nvme0 at pci14 dev 0 function 0 "SK hynix BC501 NVMe" rev
0x00vpci_intr_establish_cpu: pci_msi_setmsiq: err 6
: unable to establish interrupt
ppb14 at pci10 dev 10 function 0 "PLX PEX 8533" rev
0xaavpci_intr_establish_cpu: pci_msi_setmsiq: err 6
pci15 at ppb14 bus 17
ppb15 at pci1 dev 9 function 0 "PLX PEX 8533" rev
0xaavpci_intr_establish_cpu: pci_msi_setmsiq: err 6
pci16 at ppb15 bus 18
"niu" at mainbus0 not configured
"pci-performance-counters" at mainbus0 not configured
ebus0 at mainbus0
com0 at ebus0 addr ca0000-ca0007 ivec 0x13: ns16550a, 16 byte fifo
umass0 at uhub0 port 2 configuration 1 interface 0 "Texas Instruments
Incorporated 6250 FW: 03.05.02.22.562AD423" rev 2.00/2.00 addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
cd0 at scsibus1 targ 1 lun 0: <TSSTcorp, CD/DVDW TS-T632A, SR03> removable
serial.0451625fB030B0CF3128
uhub3 at uhub0 port 4 configuration 1 interface 0 "Cypress Semiconductor
USB2 Hub" rev 2.00/0.0b addr 3
uhidev0 at uhub1 port 2 configuration 1 interface 0 "Fujitsu Component Type
6 Keyboard" rev 1.10/2.00 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes, country code 33
wskbd0 at ukbd0 mux 1
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
bootpath: /pci@0,0/pci@0,0/pci@2,0/scsi@0,0/disk@0,0
root device: ?
use one of: exit vnet0 em0 em1 em2 em3 cd0[a-p]
root device:
Here is the factory-default dmesg:-
sc> console
Enter #. to return to ALOM.
Trying bsd...
NOTE: random seed is being reused.
Booting /pci@0/pci@0/pci@2/scsi@0/disk@0,0:a/bsd
10005840@0x1000000+4784@0x198ad50+194164@0x1c00000+4000140@0x1c2f674
symbols @ 0xfe944400 480588+165+642336+443753 start=0x1000000
[ using 1567880 bytes of bsd ELF symbol table ]
console is /virtual-devices@100/console@1
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2020 OpenBSD. All rights reserved.
https://www.OpenBSD.org
OpenBSD 6.8 (GENERIC.MP) #490: Sun Oct 4 20:52:40 MDT 2020
dera...@sparc64.openbsd.org:/usr/src/sys/arch/sparc64/compile/GENERIC.MP
real mem = 34225520640 (32640MB)
avail mem = 33603665920 (32046MB)
random: boothowto does not indicate good seed
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root: SPARC Enterprise T5120
cpu0 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu1 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu2 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu3 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu4 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu5 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu6 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu7 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu8 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu9 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu10 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu11 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu12 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu13 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu14 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu15 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu16 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu17 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu18 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu19 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu20 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu21 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu22 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu23 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu24 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu25 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu26 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu27 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu28 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu29 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu30 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu31 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu32 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu33 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu34 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu35 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu36 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu37 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu38 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu39 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu40 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu41 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu42 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu43 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu44 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu45 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu46 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu47 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu48 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu49 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu50 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu51 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu52 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu53 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu54 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu55 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu56 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu57 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu58 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu59 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu60 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu61 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu62 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
cpu63 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
vbus0 at mainbus0
"flashprom" at vbus0 not configured
"tpm" at vbus0 not configured
cbus0 at vbus0
vldc0 at cbus0
vldcp0 at vldc0 chan 0x14: ivec 0x28, 0x29 channel "spds"
"sunvts" at vldc0 chan 0x6 not configured
"sunmc" at vldc0 chan 0x7 not configured
"explorer" at vldc0 chan 0x8 not configured
"led" at vldc0 chan 0x9 not configured
"flashupdate" at vldc0 chan 0xa not configured
"ipmi" at vldc0 chan 0xc not configured
"system-management" at vldc0 chan 0xd not configured
vldc1 at cbus0
"spfma" at vldc1 chan 0x5 not configured
vldc2 at cbus0
vldcp1 at vldc2 chan 0x0: ivec 0x0, 0x1 channel "hvctl"
"ldom-primary" at vldc2 chan 0x1 not configured
"fmactl" at vldc2 chan 0x3 not configured
vldc3 at cbus0
"ldmfma" at vldc3 chan 0x4 not configured
"virtual-domain-service" at cbus0 not configured
"n2cp" at vbus0 not configured
"ncp" at vbus0 not configured
vrng0 at vbus0
vcons0 at vbus0: ivec 0x111: console
vrtc0 at vbus0
vpci0 at mainbus0: bus 2 to 18, dvma map 80000000-ffffffff
pci0 at vpci0
ppb0 at pci0 dev 0 function 0 "PLX PEX 8533" rev 0xaa
pci1 at ppb0 bus 3
ppb1 at pci1 dev 1 function 0 "PLX PEX 8533" rev 0xaa
pci2 at ppb1 bus 4
ppb2 at pci2 dev 0 function 0 "PLX PEX 8517" rev 0xac
pci3 at ppb2 bus 5
ppb3 at pci3 dev 1 function 0 "PLX PEX 8517" rev 0xac
pci4 at ppb3 bus 6
ppb4 at pci4 dev 0 function 0 "PLX PEX 8112" rev 0xaa
pci5 at ppb4 bus 7
ohci0 at pci5 dev 0 function 0 "NEC USB" rev 0x43: ivec 0x16, version 1.0
ohci1 at pci5 dev 0 function 1 "NEC USB" rev 0x43: ivec 0x17, version 1.0
ehci0 at pci5 dev 0 function 2 "NEC USB" rev 0x04: ivec 0x14
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "NEC EHCI root hub" rev 2.00/1.00
addr 1
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 configuration 1 interface 0 "NEC OHCI root hub" rev 1.00/1.00
addr 1
usb2 at ohci1: USB revision 1.0
uhub2 at usb2 configuration 1 interface 0 "NEC OHCI root hub" rev 1.00/1.00
addr 1
ppb5 at pci3 dev 2 function 0 "PLX PEX 8517" rev 0xac
pci6 at ppb5 bus 8
em0 at pci6 dev 0 function 0 "Intel 82571EB" rev 0x06: ivec 0x17, address
00:21:28:18:00:a6
em1 at pci6 dev 0 function 1 "Intel 82571EB" rev 0x06: ivec 0x14, address
00:21:28:18:00:a7
ppb6 at pci3 dev 3 function 0 "PLX PEX 8517" rev 0xaa
pci7 at ppb6 bus 9
em2 at pci7 dev 0 function 0 "Intel 82571EB" rev 0x06: ivec 0x14, address
00:21:28:18:00:a8
em3 at pci7 dev 0 function 1 "Intel 82571EB" rev 0x06: ivec 0x15, address
00:21:28:18:00:a9
ppb7 at pci1 dev 2 function 0 "PLX PEX 8533" rev 0xaa
pci8 at ppb7 bus 10
mpi0 at pci8 dev 0 function 0 "Symbios Logic SAS1068E" rev 0x04: msi
mpi0: UNUSED, firmware 1.27.0.0
scsibus1 at mpi0: 112 targets
sym0 at scsibus1 targ 0 lun 0: <SEAGATE, ST930005SSUN300G, 0606>
naa.5000c50043337d17
sd0 at scsibus0 targ 0 lun 0: <SEAGATE, ST930005SSUN300G, 0606>
naa.5000c50043337d17
sd0: 286102MB, 512 bytes/sector, 585937500 sectors
sd1 at scsibus1 targ 3 lun 0: <IBM-207x, HUC109060CSS60, J2E9>
naa.5000cca016d9df1c
sd1: 572325MB, 512 bytes/sector, 1172123568 sectors
ppb8 at pci1 dev 8 function 0 "PLX PEX 8533" rev 0xaa
pci9 at ppb8 bus 11
ppb9 at pci9 dev 0 function 0 "PLX PEX 8533" rev 0xaa
pci10 at ppb9 bus 12
ppb10 at pci10 dev 1 function 0 "PLX PEX 8533" rev 0xaa: msi
pci11 at ppb10 bus 13
radeondrm0 at pci11 dev 0 function 0 "ATI FireGL V3100" rev 0x80
drm0 at radeondrm0
radeondrm0: ivec 0x15
ppb11 at pci10 dev 2 function 0 "PLX PEX 8533" rev 0xaa: msi
pci12 at ppb11 bus 14
ppb12 at pci10 dev 8 function 0 "PLX PEX 8533" rev 0xaa: msi
pci13 at ppb12 bus 15
ppb13 at pci10 dev 9 function 0 "PLX PEX 8533" rev 0xaa: msi
pci14 at ppb13 bus 16
nvme0 at pci14 dev 0 function 0 "SK hynix BC501 NVMe" rev 0x00: msix, NVMe
1.2
nvme0: HFM256GDJTNG-8310A, firmware 80001C00, serial FY08N00281090855F
scsibus2 at nvme0: 2 targets, initiator 0
sd2 at scsibus2 targ 1 lun 0: <NVMe, HFM256GDJTNG-831, 8000>
sd2: 244198MB, 512 bytes/sector, 500118192 sectors
ppb14 at pci10 dev 10 function 0 "PLX PEX 8533" rev 0xaa: msi
pci15 at ppb14 bus 17
ppb15 at pci1 dev 9 function 0 "PLX PEX 8533" rev 0xaa: msi
pci16 at ppb15 bus 18
"niu" at mainbus0 not configured
"pci-performance-counters" at mainbus0 not configured
ebus0 at mainbus0
com0 at ebus0 addr ca0000-ca0007 ivec 0x13: ns16550a, 16 byte fifo
umass0 at uhub0 port 2 configuration 1 interface 0 "Texas Instruments
Incorporated 6250 FW: 03.05.02.22.562AD423" rev 2.00/2.00 addr 2
umass0: using SCSI over Bulk-Only
scsibus3 at umass0: 2 targets, initiator 0
cd0 at scsibus3 targ 1 lun 0: <TSSTcorp, CD/DVDW TS-T632A, SR03> removable
serial.0451625fB030B0CF3128
uhub3 at uhub0 port 4 configuration 1 interface 0 "Cypress Semiconductor
USB2 Hub" rev 2.00/0.0b addr 3
uhidev0 at uhub1 port 2 configuration 1 interface 0 "Fujitsu Component Type
6 Keyboard" rev 1.10/2.00 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes, country code 33
wskbd0 at ukbd0 mux 1
vscsi0 at root
scsibus4 at vscsi0: 256 targets
softraid0 at root
scsibus5 at softraid0: 256 targets
bootpath: /pci@0,0/pci@0,0/pci@2,0/scsi@0,0/disk@0,0
root on sd0a (283a40e8c2d92ce5.a) swap on sd0b dump on sd0b
initializing kernel modesetting (RV380 0x1002:0x5B64 0x1002:0x0B64 0x80).
BIOS signature incorrect 0 0
radeondrm0: 1280x1024, 8bpp
wsdisplay0 at radeondrm0 mux 1
wskbd0: connecting to wsdisplay0
wsdisplay0: screen 0 added (std, sun emulation)
Automatic boot in progress: starting file system checks.
/dev/sd0a (283a40e8c2d92ce5.a): file system is clean; not checking
/dev/sd2a (5ef8a8065a524911.a): file system is clean; not checking
/dev/sd0k (283a40e8c2d92ce5.k): file system is clean; not checking
/dev/sd0d (283a40e8c2d92ce5.d): file system is clean; not checking
/dev/sd0f (283a40e8c2d92ce5.f): file system is clean; not checking
/dev/sd0g (283a40e8c2d92ce5.g): file system is clean; not checking
/dev/sd0h (283a40e8c2d92ce5.h): file system is clean; not checking
/dev/sd0j (283a40e8c2d92ce5.j): file system is clean; not checking
/dev/sd0i (283a40e8c2d92ce5.i): file system is clean; not checking
/dev/sd0e (283a40e8c2d92ce5.e): file system is clean; not checking
pf enabled
starting network
em0: 192.168.1.92 lease accepted from 192.168.1.254 (5c:dc:96:06:f7:81)
reordering libraries: done.
starting early daemons: syslogd pflogd ntpd.
starting RPC daemons:.
savecore: no core dump
checking quotas: done.
clearing /tmp
kern.securelevel: 0 -> 1
creating runtime link editor directory cache.
preserving editor files.
starting network daemons: ldomd sshd smtpd sndiod.
starting local daemons: cron.
Mon Nov 9 13:38:50 GMT 2020
OpenBSD/sparc64 (t5120-14.home) (console)
login:
