HI
As far as I can tell, WiFi is nominal speed, not designated speed
Another dominating factors for that would be USB connection type, hardware bus
connections, motherboard design, direct processor lanes to where
Wifi is what it is, never as good as hard wired 100mb/1000mb or even 10gb
connections
Best
T
-----Original Message-----
From: owner-m...@openbsd.org <owner-m...@openbsd.org> On Behalf Of Joel Carnat
Sent: 27 September 2020 22:43
To: misc@openbsd.org
Subject: Issues with TP-Link UE300
Hi,
I have plugged a TP-Link UE300 on my ThinkPad X260 running OpenBSD -snapshot
and it seems I can't get more than 100Mbps.
The dongle attaches and get an IP address. But the speed seems limited.
Same behaviour when attached to the USB3 port of my APU4D4 (running 6.7).
When plugged in a MacBook Pro (running macos), it gets Gbps speed.
I have noticed that it gets attached to cdce0; I thought the RTL8153 chipset
would give me an ure0 device.
Is this expected?
Is there something I can do to get Gbps out of this device?
Thanks for help,
Jo
--
OpenBSD 6.8 (GENERIC.MP) #85: Sun Sep 27 13:39:51 MDT 2020
cdce0 at uhub0 port 15 configuration 2 interface 0 "TP-LINK USB 10/100/1000
LAN" rev 3.00/30.00 addr 4
# doas usbdevs -v
Controller /dev/usb0:
addr 01: 8086:0000 Intel, xHCI root hub
super speed, self powered, config 1, rev 1.00
driver: uhub0
addr 02: 8087:0a2b Intel, Bluetooth
full speed, self powered, config 1, rev 0.01
driver: ugen0
addr 03: 5986:0706 SunplusIT Inc, Integrated Camera
high speed, power 500 mA, config 1, rev 0.12
driver: uvideo0
addr 04: 2357:0601 TP-LINK, USB 10/100/1000 LAN
super speed, power 64 mA, config 2, rev 30.00, iSerial 000001000000
driver: cdce0
