On Tue, Aug 25, 2020 at 08:59:34PM +0300, Kihaguru Gathura wrote:
> Hi,
>
> I have tested on a 64 bit version of the same ThinkPad T60 and error is
> consistent..
>
> However Firefox opens files from any folder as root on these same machines
> running OpenBSD 6.5.
Please don't run such software as root, ever.
Especially on old code that isn't supported anymore.
If this is a disposable version for testing only, then nevermind.
Chris Bennett
>
> Kind regards,
>
> Kihaguru.
>
>
>
>
> On Sat, Aug 22, 2020 at 9:34 AM Kihaguru Gathura <pqscr...@gmail.com> wrote:
>
> > Hi,
> >
> > Firefox fails to list files at 'File Open' with error message:
> >
> > (firefox:89328): dconf-WARNING **: 09:12:15.835: failed to commit changes
> > to dconf: The given address is empty
> >
> > Please advise
> >
> > Regards,
> >
> > Kihaguru.
> >
> >
> > #
> > OpenBSD 6.7 (GENERIC.MP) #169: Thu May 7 11:37:15 MDT 2020
> > dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
> > real mem = 2137341952 (2038MB)
> > avail mem = 2082598912 (1986MB)
> > mpath0 at root
> > scsibus0 at mpath0: 256 targets
> > mainbus0 at root
> > bios0 at mainbus0: date 04/30/07, BIOS32 rev. 0 @ 0xfd6b0, SMBIOS rev. 2.4
> > @ 0xe0010 (68 entries)
> > bios0: vendor LENOVO version "79ETD3WW (2.13 )" date 04/30/2007
> > bios0: LENOVO 195143U
> > acpi0 at bios0: ACPI 3.0
> > acpi0: sleep states S0 S3 S4 S5
> > acpi0: tables DSDT FACP SSDT ECDT TCPA APIC MCFG HPET SLIC BOOT SSDT SSDT
> > SSDT SSDT
> > acpi0: wakeup devices LID_(S3) SLPB(S3) EXP0(S4) EXP1(S4) EXP2(S4)
> > EXP3(S4) PCI1(S4) USB0(S3) USB1(S3) USB2(S3) USB7(S3) HDEF(S4)
> > acpitimer0 at acpi0: 3579545 Hz, 24 bits
> > acpiec0 at acpi0
> > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> > cpu0 at mainbus0: apid 0 (boot processor)
> > cpu0: Genuine Intel(R) CPU T2400 @ 1.83GHz ("GenuineIntel" 686-class) 1.83
> > GHz, 06-0e-08
> > cpu0:
> > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,MWAIT,VMX,EST,TM2,xTPR,PDCM,NXE,PERF,SENSOR,MELTDOWN
> > mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
> > cpu0: apic clock running at 166MHz
> > cpu0: mwait min=64, max=64, C-substates=0.2.2.2.2, IBE
> > cpu1 at mainbus0: apid 1 (application processor)
> > cpu1: Genuine Intel(R) CPU T2400 @ 1.83GHz ("GenuineIntel" 686-class) 1.83
> > GHz, 06-0e-08
> > cpu1:
> > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,MWAIT,VMX,EST,TM2,xTPR,PDCM,NXE,PERF,SENSOR,MELTDOWN
> > ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins, remapped
> > acpimcfg0 at acpi0
> > acpimcfg0: addr 0xf0000000, bus 0-63
> > acpihpet0 at acpi0: 14318179 Hz
> > acpiprt0 at acpi0: bus 0 (PCI0)
> > acpiprt1 at acpi0: bus -1 (AGP_)
> > acpiprt2 at acpi0: bus 2 (EXP0)
> > acpiprt3 at acpi0: bus 3 (EXP1)
> > acpiprt4 at acpi0: bus 4 (EXP2)
> > acpiprt5 at acpi0: bus 12 (EXP3)
> > acpiprt6 at acpi0: bus 21 (PCI1)
> > acpicpu0 at acpi0: !C3(250@17 io@0x1015), !C2(500@1 io@0x1014), C1(1000@1
> > halt), PSS
> > acpicpu1 at acpi0: !C3(250@17 io@0x1015), !C2(500@1 io@0x1014), C1(1000@1
> > halt), PSS
> > acpipwrres0 at acpi0: PUBS, resource for USB0, USB2, USB7
> > acpitz0 at acpi0: critical temperature is 127 degC
> > acpitz1 at acpi0: critical temperature is 99 degC
> > acpibtn0 at acpi0: LID_
> > acpibtn1 at acpi0: SLPB
> > "PNP0A08" at acpi0 not configured
> > acpicmos0 at acpi0
> > "IBM0071" at acpi0 not configured
> > "ATM1200" at acpi0 not configured
> > acpibat0 at acpi0: BAT0 model "COMPATIBLE" serial 44 type LION oem
> > "SANYO"
> > acpiac0 at acpi0: AC unit online
> > acpithinkpad0 at acpi0: version 1.0
> > acpidock0 at acpi0: GDCK not docked (0)
> > acpivideo0 at acpi0: VID_
> > acpivout0 at acpivideo0: LCD0
> > acpivideo1 at acpi0: VID_
> > bios0: ROM list: 0xc0000/0xea00! 0xcf000/0x1000 0xd0000/0x1000
> > 0xdc000/0x4000! 0xe0000/0x10000!
> > cpu0: Enhanced SpeedStep 1829 MHz: speeds: 1833, 1333, 1000 MHz
> > pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> > pchb0 at pci0 dev 0 function 0 "Intel 82945GM Host" rev 0x03
> > inteldrm0 at pci0 dev 2 function 0 "Intel 82945GM Video" rev 0x03
> > drm0 at inteldrm0
> > intagp0 at inteldrm0
> > agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
> > inteldrm0: apic 1 int 16, I945GM, gen 3
> > "Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
> > azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: msi
> > azalia0: codecs: Analog Devices AD1981HD, Conexant/0x2bfa, using Analog
> > Devices AD1981HD
> > audio0 at azalia0
> > ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 1 int 20
> > pci1 at ppb0 bus 2
> > em0 at pci1 dev 0 function 0 "Intel 82573L" rev 0x00: msi, address
> > 00:15:58:c4:f6:49
> > ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: apic 1 int 21
> > pci2 at ppb1 bus 3
> > wpi0 at pci2 dev 0 function 0 "Intel PRO/Wireless 3945ABG" rev 0x02: msi,
> > MoW1, address 00:1b:77:4f:64:5f
> > ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02: apic 1 int 22
> > pci3 at ppb2 bus 4
> > ppb3 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x02: apic 1 int 23
> > pci4 at ppb3 bus 12
> > uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 1 int 16
> > uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 1 int 17
> > uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 1 int 18
> > uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 1 int 19
> > ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 1 int 19
> > usb0 at ehci0: USB revision 2.0
> > uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev
> > 2.00/1.00 addr 1
> > ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
> > pci5 at ppb4 bus 21
> > cbb0 at pci5 dev 0 function 0 "TI PCI1510 CardBus" rev 0x00: apic 1 int 16
> > cardslot0 at cbb0 slot 0 flags 0
> > cardbus0 at cardslot0: bus 22 device 0 cacheline 0x8, lattimer 0xb0
> > pcmcia0 at cardslot0
> > ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM
> > disabled
> > pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x02: DMA,
> > channel 0 configured to compatibility, channel 1 configured to compatibility
> > atapiscsi0 at pciide0 channel 0 drive 0
> > scsibus1 at atapiscsi0: 2 targets
> > cd0 at scsibus1 targ 0 lun 0: <MATSHITA, DVD/CDRW UJDA775, CB03> removable
> > cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
> > pciide0: channel 1 ignored (disabled)
> > ahci0 at pci0 dev 31 function 2 "Intel 82801GBM AHCI" rev 0x02: msi, AHCI
> > 1.1
> > ahci0: port 0: 1.5Gb/s
> > scsibus2 at ahci0: 32 targets
> > sd0 at scsibus2 targ 0 lun 0: <ATA, HITACHI HTS54166, SBBI>
> > naa.5000cca521c3bc11
> > sd0: 57231MB, 512 bytes/sector, 117210240 sectors
> > ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 1
> > int 23
> > iic0 at ichiic0
> > usb1 at uhci0: USB revision 1.0
> > uhub1 at usb1 configuration 1 interface 0 "Intel UHCI root hub" rev
> > 1.00/1.00 addr 1
> > usb2 at uhci1: USB revision 1.0
> > uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev
> > 1.00/1.00 addr 1
> > usb3 at uhci2: USB revision 1.0
> > uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev
> > 1.00/1.00 addr 1
> > usb4 at uhci3: USB revision 1.0
> > uhub4 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev
> > 1.00/1.00 addr 1
> > isa0 at ichpcib0
> > isadma0 at isa0
> > pckbc0 at isa0 port 0x60/5 irq 1 irq 12
> > pckbd0 at pckbc0 (kbd slot)
> > wskbd0 at pckbd0: console keyboard
> > pms0 at pckbc0 (aux slot)
> > wsmouse0 at pms0 mux 0
> > wsmouse1 at pms0 mux 0
> > pms0: Synaptics touchpad, firmware 6.2, 0x81a0b1 0x300000 0x0 0xa04793 0x0
> > pcppi0 at isa0 port 0x61
> > spkr0 at pcppi0
> > aps0 at isa0 port 0x1600/31
> > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> > uhidev0 at uhub1 port 2 configuration 1 interface 0 "PixArt HP USB Optical
> > Mouse" rev 2.00/1.00 addr 2
> > uhidev0: iclass 3/1
> > ums0 at uhidev0: 3 buttons, Z dir
> > wsmouse2 at ums0 mux 0
> > vscsi0 at root
> > scsibus3 at vscsi0: 256 targets
> > softraid0 at root
> > scsibus4 at softraid0: 256 targets
> > root on sd0a (1e4c43cb065898fd.a) swap on sd0b dump on sd0b
> > WARNING: / was not properly unmounted
> > inteldrm0: 1024x768, 32bpp
> > wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
> > wsdisplay0: screen 1-5 added (std, vt100 emulation)
> > wsmouse2 detached
> > ums0 detached
> > uhidev0 detached
> > uhidev0 at uhub1 port 2 configuration 1 interface 0 "PixArt HP USB Optical
> > Mouse" rev 2.00/1.00 addr 2
> > uhidev0: iclass 3/1
> > ums0 at uhidev0: 3 buttons, Z dir
> > wsmouse2 at ums0 mux 0
> > uhidev1 at uhub3 port 1 configuration 1 interface 0 "Lite-On Technology
> > Corp. USB Keyboard" rev 1.10/1.09 addr 2
> > uhidev1: iclass 3/1
> > ukbd0 at uhidev1: 8 variable keys, 6 key codes
> > wskbd1 at ukbd0 mux 1
> > wskbd1: connecting to wsdisplay0
> > uhidev2 at uhub3 port 1 configuration 1 interface 1 "Lite-On Technology
> > Corp. USB Keyboard" rev 1.10/1.09 addr 2
> > uhidev2: iclass 3/0, 2 report ids
> > uhid0 at uhidev2 reportid 1: input=2, output=0, feature=0
> > uhid1 at uhidev2 reportid 2: input=1, output=0, feature=0
> > #
> >
> >
