On Sat, 11 Jul 2020 00:13:34 +0200 Hrvoje Popovski <hrv...@srce.hr> wrote:
> Hi all, > > does anyone have experience or dmesg of this motherboard > https://www.supermicro.com/en/products/motherboard/A2SDV-8C-LN8F > > is it stable? i'm most interested in network performance and network > cards. in motherboard manual i couldn't find what "Quad LAN with > Intel® C3000 SoC" means ? is it i350 em(4)? > > > Thank you .. > Hello Hrvoje, I am using the smaller but similar Supermicro A2SDi-4C-HLN4F which also uses thethe Intel C3000 SoC. (In the manual it is described as "Intel® Atom SoC C3000 Series (FCBGA1310) Processor"). I have been using two systems since 6.7 was released (the first to support the onboard NICs) and they have been perfectly stable. I did some testing with a 6.7 pre-release (in March) and using tcpbench(1) and a direct cable connection I was getting about 940 Mbps between two systems. The onboard NICs are detected as ix(4) "Intel X553 SGMII" The dmesg from one of the systems is below (Note that there is an expansion NIC using re(4) which is not onboard) OpenBSD 6.7 (GENERIC.MP) #3: Thu Jul 9 07:21:14 MDT 2020 r...@syspatch-67-amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP real mem = 17125621760 (16332MB) avail mem = 16593985536 (15825MB) mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: SMBIOS rev. 3.0 @ 0x7f0c3000 (35 entries) bios0: vendor American Megatrends Inc. version "1.2" date 11/05/2019 bios0: Supermicro Super Server acpi0 at bios0: ACPI 6.1 acpi0: sleep states S0 S4 S5 acpi0: tables DSDT FACP FPDT FIDT SPMI MCFG WDAT APIC BDAT HPET UEFI SSDT DMAR HEST BERT ERST EINJ WSMT acpi0: wakeup devices XHC1(S4) OBL1(S4) LAN1(S4) PEX0(S4) LAN2(S4) LAN3(S4) PEX1(S4) PEX6(S4) PEX7(S4) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimcfg0 at acpi0 acpimcfg0: addr 0xe0000000, bus 0-255 acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 4 (boot processor) cpu0: Intel(R) Atom(TM) CPU C3558 @ 2.20GHz, 2200.43 MHz, 06-5f-01 cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SMEP,ERMS,MPX,RDSEED,SMAP,CLFLUSHOPT,PT,SHA,MD_CLEAR,IBRS,IBPB,STIBP,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES cpu0: 2MB 64b/line 16-way L2 cache cpu0: cannot disable silicon debug cpu0: smt 0, core 2, package 0 mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges cpu0: apic clock running at 25MHz cpu0: mwait min=64, max=64, C-substates=0.2.0.2, IBE cpu1 at mainbus0: apid 12 (application processor) cpu1: Intel(R) Atom(TM) CPU C3558 @ 2.20GHz, 2200.02 MHz, 06-5f-01 cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SMEP,ERMS,MPX,RDSEED,SMAP,CLFLUSHOPT,PT,SHA,MD_CLEAR,IBRS,IBPB,STIBP,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES cpu1: 2MB 64b/line 16-way L2 cache cpu1: cannot disable silicon debug cpu1: smt 0, core 6, package 0 cpu2 at mainbus0: apid 16 (application processor) cpu2: Intel(R) Atom(TM) CPU C3558 @ 2.20GHz, 2200.02 MHz, 06-5f-01 cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SMEP,ERMS,MPX,RDSEED,SMAP,CLFLUSHOPT,PT,SHA,MD_CLEAR,IBRS,IBPB,STIBP,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES cpu2: 2MB 64b/line 16-way L2 cache cpu2: cannot disable silicon debug cpu2: smt 0, core 8, package 0 cpu3 at mainbus0: apid 24 (application processor) cpu3: Intel(R) Atom(TM) CPU C3558 @ 2.20GHz, 2200.01 MHz, 06-5f-01 cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SMEP,ERMS,MPX,RDSEED,SMAP,CLFLUSHOPT,PT,SHA,MD_CLEAR,IBRS,IBPB,STIBP,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES cpu3: 2MB 64b/line 16-way L2 cache cpu3: cannot disable silicon debug cpu3: smt 0, core 12, package 0 ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins acpihpet0 at acpi0: 23999999 Hz acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 6 (VRP0) acpiprt2 at acpi0: bus 2 (PEX0) acpiprt3 at acpi0: bus 1 (VRP2) acpiprt4 at acpi0: bus 7 (VRP1) acpiprt5 at acpi0: bus -1 (PEX1) acpiprt6 at acpi0: bus 3 (PEX6) acpiprt7 at acpi0: bus 4 (PEX7) acpiprt8 at acpi0: bus 5 (BR28) acpicpu0 at acpi0: C2(10@50 mwait.1@0x21), C1(1000@1 mwait.1@0x1), PSS acpicpu1 at acpi0: C2(10@50 mwait.1@0x21), C1(1000@1 mwait.1@0x1), PSS acpicpu2 at acpi0: C2(10@50 mwait.1@0x21), C1(1000@1 mwait.1@0x1), PSS acpicpu3 at acpi0: C2(10@50 mwait.1@0x21), C1(1000@1 mwait.1@0x1), PSS acpipci0 at acpi0 PCI0: 0x00000010 0x00000011 0x00000000 "PNP0003" at acpi0 not configured acpicmos0 at acpi0 "IPI0001" at acpi0 not configured "PNP0C33" at acpi0 not configured ipmi at mainbus0 not configured cpu0: Enhanced SpeedStep 2200 MHz: speeds: 2200, 2100, 2000, 1900, 1800, 1700, 1600, 1500, 1400, 1300, 1200, 1100, 1000, 900, 800 MHz pci0 at mainbus0 bus 0 0:31:5: mem address conflict 0xfe010000/0x1000 pchb0 at pci0 dev 0 function 0 "Intel C3000 Host" rev 0x11 pchb1 at pci0 dev 4 function 0 "Intel C3000 GLREG" rev 0x11 "Intel C3000 RCEC" rev 0x11 at pci0 dev 5 function 0 not configured ppb0 at pci0 dev 6 function 0 "Intel C3000 PCIE" rev 0x11 pci1 at ppb0 bus 1 "Intel C3000 QAT" rev 0x11 at pci1 dev 0 function 0 not configured ppb1 at pci0 dev 9 function 0 "Intel C3000 PCIE" rev 0x11: msi pci2 at ppb1 bus 2 re0 at pci2 dev 0 function 0 "Realtek 8168" rev 0x06: RTL8168E/8111E (0x2c00), msi, address 18:d6:c7:05:8a:cd rgephy0 at re0 phy 7: RTL8169S/8110S/8211 PHY, rev. 4 ppb2 at pci0 dev 16 function 0 "Intel C3000 PCIE" rev 0x11 pci3 at ppb2 bus 3 ppb3 at pci0 dev 17 function 0 "Intel C3000 PCIE" rev 0x11 pci4 at ppb3 bus 4 ppb4 at pci4 dev 0 function 0 "ASPEED Technology AST1150 PCI" rev 0x03 pci5 at ppb4 bus 5 "ASPEED Technology AST2000" rev 0x30 at pci5 dev 0 function 0 not configured "Intel C3000 SMBus" rev 0x11 at pci0 dev 18 function 0 not configured ahci0 at pci0 dev 20 function 0 "Intel C3000 AHCI" rev 0x11: msi, AHCI 1.3.1 ahci0: port 6: 6.0Gb/s scsibus1 at ahci0: 32 targets sd0 at scsibus1 targ 6 lun 0: <ATA, WDC WDS120G2G0A-, UE22> naa.5001b448b197f968 sd0: 114473MB, 512 bytes/sector, 234441648 sectors, thin xhci0 at pci0 dev 21 function 0 "Intel C3000 xHCI" rev 0x11: msi, xHCI 1.0 usb0 at xhci0: USB revision 3.0 uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1 ppb5 at pci0 dev 22 function 0 "Intel C3000 PCIE" rev 0x11 pci6 at ppb5 bus 6 ix0 at pci6 dev 0 function 0 "Intel X553 SGMII" rev 0x11: msi, address 3c:ec:ef:00:38:2c ix1 at pci6 dev 0 function 1 "Intel X553 SGMII" rev 0x11: msi, address 3c:ec:ef:00:38:2d ppb6 at pci0 dev 23 function 0 "Intel C3000 PCIE" rev 0x11 pci7 at ppb6 bus 7 ix2 at pci7 dev 0 function 0 "Intel X553 SGMII" rev 0x11: msi, address 3c:ec:ef:00:38:2e ix3 at pci7 dev 0 function 1 "Intel X553 SGMII" rev 0x11: msi, address 3c:ec:ef:00:38:2f "Intel C3000 ME HECI" rev 0x11 at pci0 dev 24 function 0 not configured pcib0 at pci0 dev 31 function 0 "Intel C3000 LPC" rev 0x11 "Intel C3000 PMC" rev 0x11 at pci0 dev 31 function 2 not configured "Intel C3000 SMBus" rev 0x11 at pci0 dev 31 function 4 not configured "Intel C3000 SPI" rev 0x11 at pci0 dev 31 function 5 not configured isa0 at pcib0 isadma0 at isa0 com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo pcppi0 at isa0 port 0x61 spkr0 at pcppi0 vmm0 at mainbus0: VMX/EPT efifb0 at mainbus0: 1024x768, 32bpp wsdisplay0 at efifb0 mux 1: console (std, vt100 emulation) wsdisplay0: screen 1-5 added (std, vt100 emulation) uhub1 at uhub0 port 3 configuration 1 interface 0 "Genesys Logic USB2.0 Hub" rev 2.00/32.98 addr 2 uhub2 at uhub1 port 1 configuration 1 interface 0 "ATEN International product 0x7000" rev 2.00/0.00 addr 3 uhidev0 at uhub2 port 1 configuration 1 interface 0 "ATEN International product 0x2419" rev 1.10/1.00 addr 4 uhidev0: iclass 3/1 ukbd0 at uhidev0: 8 variable keys, 6 key codes wskbd0 at ukbd0: console keyboard, using wsdisplay0 uhidev1 at uhub2 port 1 configuration 1 interface 1 "ATEN International product 0x2419" rev 1.10/1.00 addr 4 uhidev1: iclass 3/1 ums0 at uhidev1: 3 buttons, Z dir wsmouse0 at ums0 mux 0 uhub3 at uhub1 port 2 configuration 1 interface 0 "Genesys Logic USB2.0 Hub" rev 2.00/32.98 addr 5 vscsi0 at root scsibus2 at vscsi0: 256 targets softraid0 at root scsibus3 at softraid0: 256 targets root on sd0a (4a0c040ff86a6285.a) swap on sd0b dump on sd0b Richard
