Booting a current kernel, does not solve the problem either...
I was able to boot -s /obsd and put the new kernel there.

here is the new dmesg:

> OpenBSD/amd64 BOOT 3.45                                                      
boot>                                                                          
booting hd0a:/bsd: 14378312+3167240+344096+0+872448 
[971286+128+1132776+856665]=0x14ba1e0
entry point at 0xffffffff81001000[ using 2961888 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993                                     
        The Regents of the University of California.  All rights reserved.     
Copyright (c) 1995-2020 OpenBSD. All rights reserved.  https://www.OpenBSD.org 
                                                                               
OpenBSD 6.7-current (GENERIC.MP) #254: Mon Jun  8 18:47:16 MDT 2020            
    dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP       
real mem = 4234805248 (4038MB)                                                 
avail mem = 4091523072 (3901MB)                                                
random: boothowto does not indicate good seed                                  
mpath0 at root                                                                 
scsibus0 at mpath0: 256 targets                                                
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xbf6c8000 (92 entries)
bios0: vendor FUJITSU // Phoenix Technologies Ltd. version "6.00 Rev. 
1.10.3031" date 01/20/2012
bios0: FUJITSU PRIMERGY RX200 S6
acpi0 at bios0: ACPI 3.0
acpi0: sleep states S0 S1 S4 S5                                                
acpi0: tables DSDT FACP TCPA SLIT SSDT SSDT SSDT SSDT SSDT SSDT SSDT SSDT SSDT 
SSDT SSDT SSDT EINJ HEST BERT SSDT ERST SPCR MCFG HPET APIC BOOT                
                  
acpi0: wakeup devices PE0_(S4) PE1_(S4) PE3_(S4) PE7_(S4) PE9_(S4) PE1A(S4) 
USB1(S1) USB2(S1) USB3(S1) USB4(S1) USB5(S1) USB6(S1) USB7(S1) USB8(S1) COM1(S1)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimcfg0 at acpi0
acpimcfg0: addr 0xe0000000, bus 0-9
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 32 (boot processor)
cpu0: Intel(R) Xeon(R) CPU X5660 @ 2.80GHz, 2800.47 MHz, 06-2c-02
cpu0: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,PAGE1GB,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,MELTDOWN
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 1
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 133MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.1, IBE
cpu1 at mainbus0: apid 34 (application processor)
cpu1: Intel(R) Xeon(R) CPU X5660 @ 2.80GHz, 2800.11 MHz, 06-2c-02
cpu1: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,PAGE1GB,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,MELTDOWN
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 1
cpu2 at mainbus0: apid 36 (application processor)
cpu2: Intel(R) Xeon(R) CPU X5660 @ 2.80GHz, 2800.11 MHz, 06-2c-02
cpu2: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,PAGE1GB,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,MELTDOWN
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 2, package 1
cpu3 at mainbus0: apid 48 (application processor)
cpu3: Intel(R) Xeon(R) CPU X5660 @ 2.80GHz, 2800.11 MHz, 06-2c-02
cpu3: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,PAGE1GB,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,MELTDOWN
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 0, core 8, package 1
cpu4 at mainbus0: apid 50 (application processor)
cpu4: Intel(R) Xeon(R) CPU X5660 @ 2.80GHz, 2800.11 MHz, 06-2c-02
cpu4: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,PAGE1GB,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,MELTDOWN
cpu4: 256KB 64b/line 8-way L2 cache
cpu4: smt 0, core 9, package 1
cpu5 at mainbus0: apid 52 (application processor)
cpu5: Intel(R) Xeon(R) CPU X5660 @ 2.80GHz, 2800.11 MHz, 06-2c-02
cpu5: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,PAGE1GB,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,MELTDOWN
cpu5: 256KB 64b/line 8-way L2 cache
cpu5: smt 0, core 10, package 1
ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 24 pins
ioapic1 at mainbus0: apid 1 pa 0xfec80000, version 20, 24 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (PE1_)
acpiprt2 at acpi0: bus 2 (PE3_)
acpiprt3 at acpi0: bus 3 (PE7_)
acpiprt4 at acpi0: bus 7 (PE9_)
acpiprt5 at acpi0: bus 8 (PE1A)
acpicpu0 at acpi0: C3(350@128 io@0x1015), C2(500@96 io@0x1014), C1(1000@32 
halt), PSS
acpicpu1 at acpi0: C3(350@128 io@0x1015), C2(500@96 io@0x1014), C1(1000@32 
halt), PSS
acpicpu2 at acpi0: C3(350@128 io@0x1015), C2(500@96 io@0x1014), C1(1000@32 
halt), PSS
acpicpu3 at acpi0: C3(350@128 io@0x1015), C2(500@96 io@0x1014), C1(1000@32 
halt), PSS
acpicpu4 at acpi0: C3(350@128 io@0x1015), C2(500@96 io@0x1014), C1(1000@32 
halt), PSS
acpicpu5 at acpi0: C3(350@128 io@0x1015), C2(500@96 io@0x1014), C1(1000@32 
halt), PSS
acpibtn0 at acpi0: PWRB
acpipci0 at acpi0 CPU0
extent `acpipci0 pcibus' (0x0 - 0xff), flags=0
     0x0 - 0xfe
extent `pciio' (0x0 - 0xffffffff), flags=0
     0x10000 - 0xffffffff
extent `pcimem' (0x0 - 0xffffffffffffffff), flags=0
     0x0 - 0xbfffffff
     0xe0000000 - 0xefffffff
     0xfec00000 - 0xfecfffff
     0xfee00000 - 0xfee00fff
     0xffa00000 - 0xffffffff
     0x40000000000 - 0xffffffffffffffff
acpipci1 at acpi0 CPU1
extent `acpipci1 pcibus' (0x0 - 0xff), flags=0
     0x0 - 0xfd
     0xff - 0xff
extent `pciio' (0x0 - 0xffffffff), flags=0
     0x10000 - 0xffffffff
extent `pcimem' (0x0 - 0xffffffffffffffff), flags=0
     0x0 - 0xbfffffff
     0xe0000000 - 0xefffffff
     0xfec00000 - 0xfecfffff
     0xfee00000 - 0xfee00fff
     0xffa00000 - 0xffffffff
     0x40000000000 - 0xffffffffffffffff
acpipci2 at acpi0 PCI0
extent `acpipci2 pcibus' (0x0 - 0xff), flags=0
     0x3e - 0xff
extent `pciio' (0x0 - 0xffffffff), flags=0
     0x10000 - 0xffffffff
extent `pcimem' (0x0 - 0xffffffffffffffff), flags=0
     0x0 - 0xbfffffff
     0xe0000000 - 0xefffffff
     0xfec00000 - 0xfecfffff
     0xfee00000 - 0xfee00fff
     0xffa00000 - 0xffffffff
     0x40000000000 - 0xffffffffffffffff
acpicmos0 at acpi0
"PNP0A05" at acpi0 not configured
"IPI0001" at acpi0 not configured
"PNP0A05" at acpi0 not configured
acpiac0 at acpi0: AC unit online
"ACPI000D" at acpi0 not configured
ipmi at mainbus0 not configured
cpu0: using IvyBridge MDS workaround
cpu0: Enhanced SpeedStep 2800 MHz: speeds: 2794, 2793, 2660, 2527, 2394, 2261, 
2128, 1995, 1862, 1729, 1596 MHz
pci0 at mainbus0 bus 255
pci1 at mainbus0 bus 254
pchb0 at pci1 dev 0 function 0 vendor "Intel", unknown product 0x2c70 rev 0x02
pchb1 at pci1 dev 0 function 1 vendor "Intel", unknown product 0x2d81 rev 0x02
pchb2 at pci1 dev 2 function 0 vendor "Intel", unknown product 0x2d90 rev 0x02
pchb3 at pci1 dev 2 function 1 vendor "Intel", unknown product 0x2d91 rev 0x02
pchb4 at pci1 dev 2 function 2 vendor "Intel", unknown product 0x2d92 rev 0x02
pchb5 at pci1 dev 2 function 3 vendor "Intel", unknown product 0x2d93 rev 0x02
pchb6 at pci1 dev 2 function 4 vendor "Intel", unknown product 0x2d94 rev 0x02
pchb7 at pci1 dev 2 function 5 vendor "Intel", unknown product 0x2d95 rev 0x02
pchb8 at pci1 dev 3 function 0 vendor "Intel", unknown product 0x2d98 rev 0x02
pchb9 at pci1 dev 3 function 1 vendor "Intel", unknown product 0x2d99 rev 0x02
pchb10 at pci1 dev 3 function 2 vendor "Intel", unknown product 0x2d9a rev 0x02
pchb11 at pci1 dev 3 function 4 vendor "Intel", unknown product 0x2d9c rev 0x02
pchb12 at pci1 dev 4 function 0 vendor "Intel", unknown product 0x2da0 rev 0x02
pchb13 at pci1 dev 4 function 1 vendor "Intel", unknown product 0x2da1 rev 0x02
pchb14 at pci1 dev 4 function 2 vendor "Intel", unknown product 0x2da2 rev 0x02
pchb15 at pci1 dev 4 function 3 vendor "Intel", unknown product 0x2da3 rev 0x02
pchb16 at pci1 dev 5 function 0 vendor "Intel", unknown product 0x2da8 rev 0x02
pchb17 at pci1 dev 5 function 1 vendor "Intel", unknown product 0x2da9 rev 0x02
pchb18 at pci1 dev 5 function 2 vendor "Intel", unknown product 0x2daa rev 0x02
pchb19 at pci1 dev 5 function 3 vendor "Intel", unknown product 0x2dab rev 0x02
pchb20 at pci1 dev 6 function 0 vendor "Intel", unknown product 0x2db0 rev 0x02
pchb21 at pci1 dev 6 function 1 vendor "Intel", unknown product 0x2db1 rev 0x02
pchb22 at pci1 dev 6 function 2 vendor "Intel", unknown product 0x2db2 rev 0x02
pchb23 at pci1 dev 6 function 3 vendor "Intel", unknown product 0x2db3 rev 0x02
pci2 at mainbus0 bus 0
pchb24 at pci2 dev 0 function 0 "Intel 5500 Host" rev 0x13
ppb0 at pci2 dev 1 function 0 "Intel X58 PCIE" rev 0x13: msi
pci3 at ppb0 bus 1
em0 at pci3 dev 0 function 0 "Intel 82575EB" rev 0x02: msi, address 
00:26:2d:08:eb:3e
em1 at pci3 dev 0 function 1 "Intel 82575EB" rev 0x02: msi, address 
00:26:2d:08:eb:3f
ppb1 at pci2 dev 3 function 0 "Intel X58 PCIE" rev 0x13: msi
pci4 at ppb1 bus 2
mfi0 at pci4 dev 0 function 0 "Symbios Logic MegaRAID SAS2008" rev 0x03: apic 1 
int 0
mfi0: "RAID Ctrl SAS 6G 0/1 (D2607)", firmware 20.7.1-0025
scsibus1 at mfi0: 16 targets
sd0 at scsibus1 targ 0 lun 0: <LSI, RAID SAS 6G 0/1, 2.90> 
naa.6003005700e53d7018c3c52f17fb1721
sd0: 69472MB, 512 bytes/sector, 142278656 sectors
scsibus2 at mfi0: 256 targets
ppb2 at pci2 dev 7 function 0 "Intel X58 PCIE" rev 0x13: msi
pci5 at ppb2 bus 3
ppb3 at pci5 dev 0 function 0 "IDT 89HPES12N3A" rev 0x0e
pci6 at ppb3 bus 4
ppb4 at pci6 dev 2 function 0 "IDT 89HPES12N3A" rev 0x0e
pci7 at ppb4 bus 5
em2 at pci7 dev 0 function 0 "Intel 82571EB" rev 0x06: apic 1 int 14, address 
00:1b:21:95:2d:e9
em3 at pci7 dev 0 function 1 "Intel 82571EB" rev 0x06: apic 1 int 15, address 
00:1b:21:95:2d:e8
ppb5 at pci6 dev 4 function 0 "IDT 89HPES12N3A" rev 0x0e
pci8 at ppb5 bus 6
em4 at pci8 dev 0 function 0 "Intel 82571EB" rev 0x06: apic 1 int 13, address 
00:1b:21:95:2d:eb
em5 at pci8 dev 0 function 1 "Intel 82571EB" rev 0x06: apic 1 int 6, address 
00:1b:21:95:2d:ea
ppb6 at pci2 dev 9 function 0 "Intel X58 PCIE" rev 0x13: msi
pci9 at ppb6 bus 7
"Intel X58 QuickPath" rev 0x13 at pci2 dev 16 function 0 not configured
"Intel X58 QuickPath" rev 0x13 at pci2 dev 16 function 1 not configured
"Intel X58 QuickPath" rev 0x13 at pci2 dev 17 function 0 not configured
"Intel X58 QuickPath" rev 0x13 at pci2 dev 17 function 1 not configured
"Intel X58 Misc" rev 0x13 at pci2 dev 20 function 0 not configured
"Intel X58 GPIO" rev 0x13 at pci2 dev 20 function 1 not configured
"Intel X58 RAS" rev 0x13 at pci2 dev 20 function 2 not configured
"Intel X58 Throttle" rev 0x13 at pci2 dev 20 function 3 not configured
vendor "Intel", unknown product 0x342f (class system subclass interrupt, rev 
0x13) at pci2 dev 21 function 0 not configured
"Intel X58 QuickData" rev 0x13 at pci2 dev 22 function 0 not configured
"Intel X58 QuickData" rev 0x13 at pci2 dev 22 function 1 not configured
"Intel X58 QuickData" rev 0x13 at pci2 dev 22 function 2 not configured
"Intel X58 QuickData" rev 0x13 at pci2 dev 22 function 3 not configured
"Intel X58 QuickData" rev 0x13 at pci2 dev 22 function 4 not configured
"Intel X58 QuickData" rev 0x13 at pci2 dev 22 function 5 not configured
"Intel X58 QuickData" rev 0x13 at pci2 dev 22 function 6 not configured
"Intel X58 QuickData" rev 0x13 at pci2 dev 22 function 7 not configured
uhci0 at pci2 dev 26 function 0 "Intel 82801JI USB" rev 0x00: apic 0 int 19
uhci1 at pci2 dev 26 function 1 "Intel 82801JI USB" rev 0x00: apic 0 int 18
uhci2 at pci2 dev 26 function 2 "Intel 82801JI USB" rev 0x00: apic 0 int 18
ehci0 at pci2 dev 26 function 7 "Intel 82801JI USB" rev 0x00: apic 0 int 18
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 
addr 1
ppb7 at pci2 dev 28 function 0 "Intel 82801JI PCIE" rev 0x00: msi
pci10 at ppb7 bus 8
vga1 at pci10 dev 0 function 0 "Matrox MGA G200e" rev 0x02
wsdisplay at vga1 not configured
uhci3 at pci2 dev 29 function 0 "Intel 82801JI USB" rev 0x00: apic 0 int 23
uhci4 at pci2 dev 29 function 1 "Intel 82801JI USB" rev 0x00: apic 0 int 22
uhci5 at pci2 dev 29 function 2 "Intel 82801JI USB" rev 0x00: apic 0 int 21
ehci1 at pci2 dev 29 function 7 "Intel 82801JI USB" rev 0x00: apic 0 int 23
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 
addr 1
ppb8 at pci2 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x90
pci11 at ppb8 bus 9
pcib0 at pci2 dev 31 function 0 "Intel 82801JIR LPC" rev 0x00
pciide0 at pci2 dev 31 function 2 "Intel 82801JI SATA" rev 0x00: DMA, channel 0 
configured to nati
ve-PCI, channel 1 configured to native-PCI
pciide0: using apic 0 int 16 for native-PCI interrupt
ichiic0 at pci2 dev 31 function 3 "Intel 82801JI SMBus" rev 0x00: apic 0 int 17
iic0 at ichiic0
iic0: addr 0x2e 00=40 words 00=4040 01=0000 02=0000 03=0000 04=0000 05=0000 
06=0000 07=0000
pciide1 at pci2 dev 31 function 5 "Intel 82801JI SATA" rev 0x00: DMA, channel 0 
wired to native-PCI, channel 1 wired to native-PCI
pciide1: using apic 0 int 17 for native-PCI interrupt
atapiscsi0 at pciide1 channel 1 drive 0
scsibus3 at atapiscsi0: 2 targets
cd0 at scsibus3 targ 0 lun 0: <Optiarc, DVD RW AD-7710H, 1.40> removable
cd0(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 5
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 
addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 
addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 
addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 
addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 
addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 
addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
pcppi0 at isa0 port 0x61
spkr0 at pcppi0

G

On 09/06/2020 14:32, Kapetanakis Giannis wrote:
> Hi,
>
> I'm trying to update a Fujitsu RX200 S6 server from  6.6->6.7 and I'm having 
> problems.
>
> via sysupgrade boot of upgrade kernel stops (no hung, no ddb) at
>
> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> com0: console
> pckbc0 at isa0 port 0x60/5 irq 1 irq 12
> pcppi0 at isa0 port 0x61
>
> With manual upgrade process it stops later at
> pchb24 at pci11 dev 6 function 3 vendor "Intel", unknown product 0x2db3 rev 
> 0x02
>
> just before:
> uhidev0 at uhub7 port 2 configuration 1 interface 0 "Dell Dell USB Keyboard" 
> rev 1.10/3.06 addr 2
> uhidev0: iclass 3/1
> ukbd0 at uhidev0: 8 variable keys, 6 key codes
> wskbd0 at ukbd0: console keyboard, using wsdisplay0
> vscsi0 at root
> scsibus4 at vscsi0: 256 targets
> softraid0 at root
> scsibus5 at softraid0: 256 targets
> root on sd0a (190c023aaaa894b4.a) swap on sd0b dump on sd0b
>
> could it be the raid controller?
>
> I cannot even boot /obsd with 6.6 kernel (Bad system call) so i'm stack.
>
> I've tried disabling
>
> wskbd, ukbd, uhidev, pcppi, pckbc, usb without luck.
>
> Console is via ipmi but even if I turn it to my kvm i have the same problem.
>
> any ideas?
>
> Thanks,
>
> Giannis
>
> OpenBSD 6.6 (GENERIC.MP) #0: Thu Jun  4 16:25:00 MDT 2020
>     
> t...@syspatch-66-amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> real mem = 4234805248 (4038MB)
> avail mem = 4093743104 (3904MB)
> mpath0 at root
> scsibus0 at mpath0: 256 targets
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xbf6c8000 (92 entries)
> bios0: vendor FUJITSU // Phoenix Technologies Ltd. version "6.00 Rev. 
> 1.06.3031" date 12/14/2010
> bios0: FUJITSU PRIMERGY RX200 S6
> acpi0 at bios0: ACPI 3.0
> acpi0: sleep states S0 S1 S4 S5
> acpi0: tables DSDT FACP TCPA SLIT SSDT SSDT SSDT SSDT SSDT SSDT SSDT SSDT 
> SSDT SSDT SSDT SSDT EINJ HEST BERT SSDT ERST SPCR MCFG HPET APIC BOOT
> acpi0: wakeup devices PE0_(S4) PE1_(S4) PE3_(S4) PE7_(S4) PE9_(S4) PE1A(S4) 
> USB1(S1) USB2(S1) USB3(S1) USB4(S1) USB5(S1) USB6(S1) USB7(S1) USB8(S1) 
> COM1(S1)
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpimcfg0 at acpi0
> acpimcfg0: addr 0xe0000000, bus 0-9
> acpihpet0 at acpi0: 14318179 Hz
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 32 (boot processor)
> cpu0: Intel(R) Xeon(R) CPU X5660 @ 2.80GHz, 2800.54 MHz, 06-2c-02
> cpu0: 
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,PAGE1GB,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,MELTDOWN
> cpu0: 256KB 64b/line 8-way L2 cache
> cpu0: smt 0, core 0, package 1
> mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
> cpu0: apic clock running at 133MHz
> cpu0: mwait min=64, max=64, C-substates=0.2.1.1, IBE
> cpu1 at mainbus0: apid 34 (application processor)
> cpu1: Intel(R) Xeon(R) CPU X5660 @ 2.80GHz, 2800.11 MHz, 06-2c-02
> cpu1: 
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,PAGE1GB,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,MELTDOWN
> cpu1: 256KB 64b/line 8-way L2 cache
> cpu1: smt 0, core 1, package 1
> cpu2 at mainbus0: apid 36 (application processor)
> cpu2: Intel(R) Xeon(R) CPU X5660 @ 2.80GHz, 2800.11 MHz, 06-2c-02
> cpu2: 
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,PAGE1GB,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,MELTDOWN
> cpu2: 256KB 64b/line 8-way L2 cache
> cpu2: smt 0, core 2, package 1
> cpu3 at mainbus0: apid 48 (application processor)
> cpu3: Intel(R) Xeon(R) CPU X5660 @ 2.80GHz, 2800.11 MHz, 06-2c-02
> cpu3: 
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,PAGE1GB,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,MELTDOWN
> cpu3: 256KB 64b/line 8-way L2 cache
> cpu3: smt 0, core 8, package 1
> cpu4 at mainbus0: apid 50 (application processor)
> cpu4: Intel(R) Xeon(R) CPU X5660 @ 2.80GHz, 2800.11 MHz, 06-2c-02
> cpu4: 
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,PAGE1GB,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,MELTDOWN
> cpu4: 256KB 64b/line 8-way L2 cache
> cpu4: smt 0, core 9, package 1
> cpu5 at mainbus0: apid 52 (application processor)
> cpu5: Intel(R) Xeon(R) CPU X5660 @ 2.80GHz, 2800.11 MHz, 06-2c-02
> cpu5: 
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,PAGE1GB,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,MELTDOWN
> cpu5: 256KB 64b/line 8-way L2 cache
> cpu5: smt 0, core 10, package 1
> ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 24 pins
> ioapic1 at mainbus0: apid 1 pa 0xfec80000, version 20, 24 pins
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus 1 (PE1_)
> acpiprt2 at acpi0: bus 2 (PE3_)
> acpiprt3 at acpi0: bus 3 (PE7_)
> acpiprt4 at acpi0: bus 7 (PE9_)
> acpiprt5 at acpi0: bus 8 (PE1A)
> acpicpu0 at acpi0: C3(350@128 io@0x1015), C2(500@96 io@0x1014), C1(1000@32 
> halt), PSS
> acpicpu1 at acpi0: C3(350@128 io@0x1015), C2(500@96 io@0x1014), C1(1000@32 
> halt), PSS
> acpicpu2 at acpi0: C3(350@128 io@0x1015), C2(500@96 io@0x1014), C1(1000@32 
> halt), PSS
> acpicpu3 at acpi0: C3(350@128 io@0x1015), C2(500@96 io@0x1014), C1(1000@32 
> halt), PSS
> acpicpu4 at acpi0: C3(350@128 io@0x1015), C2(500@96 io@0x1014), C1(1000@32 
> halt), PSS
> acpicpu5 at acpi0: C3(350@128 io@0x1015), C2(500@96 io@0x1014), C1(1000@32 
> halt), PSS
> acpibtn0 at acpi0: PWRB
> acpipci0 at acpi0 CPU0: _OSC failed
> acpipci1 at acpi0 CPU1: _OSC failed
> acpipci2 at acpi0 PCI0: _OSC failed
> acpicmos0 at acpi0
> "PNP0A05" at acpi0 not configured
> "IPI0001" at acpi0 not configured
> "PNP0A05" at acpi0 not configured
> acpiac0 at acpi0: AC unit online
> "ACPI000D" at acpi0 not configured
> ipmi at mainbus0 not configured
> cpu0: using IvyBridge MDS workaround
> cpu0: Enhanced SpeedStep 2800 MHz: speeds: 2794, 2793, 2660, 2527, 2394, 
> 2261, 2128, 1995, 1862, 1729, 1596 MHz
> pci0 at mainbus0 bus 0
> pchb0 at pci0 dev 0 function 0 "Intel 5500 Host" rev 0x13
> ppb0 at pci0 dev 1 function 0 "Intel X58 PCIE" rev 0x13: msi
> pci1 at ppb0 bus 1
> em0 at pci1 dev 0 function 0 "Intel 82575EB" rev 0x02: msi, address 
> 00:26:2d:08:eb:3e
> em1 at pci1 dev 0 function 1 "Intel 82575EB" rev 0x02: msi, address 
> 00:26:2d:08:eb:3f
> ppb1 at pci0 dev 3 function 0 "Intel X58 PCIE" rev 0x13: msi
> pci2 at ppb1 bus 2
> mfi0 at pci2 dev 0 function 0 "Symbios Logic MegaRAID SAS2008" rev 0x03: apic 
> 1 int 0
> mfi0: "RAID Ctrl SAS 6G 0/1 (D2607)", firmware 20.7.1-0025
> scsibus1 at mfi0: 16 targets
> sd0 at scsibus1 targ 0 lun 0: <LSI, RAID SAS 6G 0/1, 2.90> 
> naa.6003005700e53d7018c3c52f17fb1721
> sd0: 69472MB, 512 bytes/sector, 142278656 sectors
> scsibus2 at mfi0: 256 targets
> ppb2 at pci0 dev 7 function 0 "Intel X58 PCIE" rev 0x13: msi
> pci3 at ppb2 bus 3
> ppb3 at pci3 dev 0 function 0 "IDT 89HPES12N3A" rev 0x0e
> pci4 at ppb3 bus 4
> ppb4 at pci4 dev 2 function 0 "IDT 89HPES12N3A" rev 0x0e
> pci5 at ppb4 bus 5
> em2 at pci5 dev 0 function 0 "Intel 82571EB" rev 0x06: apic 1 int 14, address 
> 00:1b:21:95:2d:e9
> em3 at pci5 dev 0 function 1 "Intel 82571EB" rev 0x06: apic 1 int 15, address 
> 00:1b:21:95:2d:e8
> ppb5 at pci4 dev 4 function 0 "IDT 89HPES12N3A" rev 0x0e
> pci6 at ppb5 bus 6
> em4 at pci6 dev 0 function 0 "Intel 82571EB" rev 0x06: apic 1 int 13, address 
> 00:1b:21:95:2d:eb
> em5 at pci6 dev 0 function 1 "Intel 82571EB" rev 0x06: apic 1 int 6, address 
> 00:1b:21:95:2d:ea
> ppb6 at pci0 dev 9 function 0 "Intel X58 PCIE" rev 0x13: msi
> pci7 at ppb6 bus 7
> "Intel X58 QuickPath" rev 0x13 at pci0 dev 16 function 0 not configured
> "Intel X58 QuickPath" rev 0x13 at pci0 dev 16 function 1 not configured
> "Intel X58 QuickPath" rev 0x13 at pci0 dev 17 function 0 not configured
> "Intel X58 QuickPath" rev 0x13 at pci0 dev 17 function 1 not configured
> "Intel X58 Misc" rev 0x13 at pci0 dev 20 function 0 not configured
> "Intel X58 GPIO" rev 0x13 at pci0 dev 20 function 1 not configured
> "Intel X58 RAS" rev 0x13 at pci0 dev 20 function 2 not configured
> "Intel X58 Throttle" rev 0x13 at pci0 dev 20 function 3 not configured
> vendor "Intel", unknown product 0x342f (class system subclass interrupt, rev 
> 0x13) at pci0 dev 21 function 0 not configured
> "Intel X58 QuickData" rev 0x13 at pci0 dev 22 function 0 not configured
> "Intel X58 QuickData" rev 0x13 at pci0 dev 22 function 1 not configured
> "Intel X58 QuickData" rev 0x13 at pci0 dev 22 function 2 not configured
> "Intel X58 QuickData" rev 0x13 at pci0 dev 22 function 3 not configured
> "Intel X58 QuickData" rev 0x13 at pci0 dev 22 function 4 not configured
> "Intel X58 QuickData" rev 0x13 at pci0 dev 22 function 5 not configured
> "Intel X58 QuickData" rev 0x13 at pci0 dev 22 function 6 not configured
> "Intel X58 QuickData" rev 0x13 at pci0 dev 22 function 7 not configured
> uhci0 at pci0 dev 26 function 0 "Intel 82801JI USB" rev 0x00: apic 0 int 19
> uhci1 at pci0 dev 26 function 1 "Intel 82801JI USB" rev 0x00: apic 0 int 18
> uhci2 at pci0 dev 26 function 2 "Intel 82801JI USB" rev 0x00: apic 0 int 18
> ehci0 at pci0 dev 26 function 7 "Intel 82801JI USB" rev 0x00: apic 0 int 18
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 
> addr 1
> ppb7 at pci0 dev 28 function 0 "Intel 82801JI PCIE" rev 0x00: msi
> pci8 at ppb7 bus 8
> vga1 at pci8 dev 0 function 0 "Matrox MGA G200e" rev 0x02
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> uhci3 at pci0 dev 29 function 0 "Intel 82801JI USB" rev 0x00: apic 0 int 23
> uhci4 at pci0 dev 29 function 1 "Intel 82801JI USB" rev 0x00: apic 0 int 22
> uhci5 at pci0 dev 29 function 2 "Intel 82801JI USB" rev 0x00: apic 0 int 21
> ehci1 at pci0 dev 29 function 7 "Intel 82801JI USB" rev 0x00: apic 0 int 23
> usb1 at ehci1: USB revision 2.0
> uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 
> addr 1
> ppb8 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x90
> pci9 at ppb8 bus 9
> pcib0 at pci0 dev 31 function 0 "Intel 82801JIR LPC" rev 0x00
> pciide0 at pci0 dev 31 function 2 "Intel 82801JI SATA" rev 0x00: DMA, channel 
> 0 configured to native-PCI, channel 1 configured to native-PCI
> pciide0: using apic 0 int 16 for native-PCI interrupt
> ichiic0 at pci0 dev 31 function 3 "Intel 82801JI SMBus" rev 0x00: apic 0 int 
> 17
> iic0 at ichiic0
> iic0: addr 0x2e 00=40 words 00=4040 01=0000 02=0000 03=0000 04=0000 05=0000 
> 06=0000 07=0000
> pciide1 at pci0 dev 31 function 5 "Intel 82801JI SATA" rev 0x00: DMA, channel 
> 0 wired to native-PCI, channel 1 wired to native-PCI
> pciide1: using apic 0 int 17 for native-PCI interrupt
> atapiscsi0 at pciide1 channel 1 drive 0
> scsibus3 at atapiscsi0: 2 targets
> cd0 at scsibus3 targ 0 lun 0: <Optiarc, DVD RW AD-7710H, 1.40> removable
> cd0(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 5
> usb2 at uhci0: USB revision 1.0
> uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 
> addr 1
> usb3 at uhci1: USB revision 1.0
> uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 
> addr 1
> usb4 at uhci2: USB revision 1.0
> uhub4 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 
> addr 1
> usb5 at uhci3: USB revision 1.0
> uhub5 at usb5 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 
> addr 1
> usb6 at uhci4: USB revision 1.0
> uhub6 at usb6 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 
> addr 1
> usb7 at uhci5: USB revision 1.0
> uhub7 at usb7 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 
> addr 1
> isa0 at pcib0
> isadma0 at isa0
> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> com0: console
> pckbc0 at isa0 port 0x60/5 irq 1 irq 12
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> pci10 at mainbus0 bus 255
> pci11 at mainbus0 bus 254
> pchb1 at pci11 dev 0 function 0 vendor "Intel", unknown product 0x2c70 rev 
> 0x02
> pchb2 at pci11 dev 0 function 1 vendor "Intel", unknown product 0x2d81 rev 
> 0x02
> pchb3 at pci11 dev 2 function 0 vendor "Intel", unknown product 0x2d90 rev 
> 0x02
> pchb4 at pci11 dev 2 function 1 vendor "Intel", unknown product 0x2d91 rev 
> 0x02
> pchb5 at pci11 dev 2 function 2 vendor "Intel", unknown product 0x2d92 rev 
> 0x02
> pchb6 at pci11 dev 2 function 3 vendor "Intel", unknown product 0x2d93 rev 
> 0x02
> pchb7 at pci11 dev 2 function 4 vendor "Intel", unknown product 0x2d94 rev 
> 0x02
> pchb8 at pci11 dev 2 function 5 vendor "Intel", unknown product 0x2d95 rev 
> 0x02
> pchb9 at pci11 dev 3 function 0 vendor "Intel", unknown product 0x2d98 rev 
> 0x02
> pchb10 at pci11 dev 3 function 1 vendor "Intel", unknown product 0x2d99 rev 
> 0x02
> pchb11 at pci11 dev 3 function 2 vendor "Intel", unknown product 0x2d9a rev 
> 0x02
> pchb12 at pci11 dev 3 function 4 vendor "Intel", unknown product 0x2d9c rev 
> 0x02
> pchb13 at pci11 dev 4 function 0 vendor "Intel", unknown product 0x2da0 rev 
> 0x02
> pchb14 at pci11 dev 4 function 1 vendor "Intel", unknown product 0x2da1 rev 
> 0x02
> pchb15 at pci11 dev 4 function 2 vendor "Intel", unknown product 0x2da2 rev 
> 0x02
> pchb16 at pci11 dev 4 function 3 vendor "Intel", unknown product 0x2da3 rev 
> 0x02
> pchb17 at pci11 dev 5 function 0 vendor "Intel", unknown product 0x2da8 rev 
> 0x02
> pchb18 at pci11 dev 5 function 1 vendor "Intel", unknown product 0x2da9 rev 
> 0x02
> pchb19 at pci11 dev 5 function 2 vendor "Intel", unknown product 0x2daa rev 
> 0x02
> pchb20 at pci11 dev 5 function 3 vendor "Intel", unknown product 0x2dab rev 
> 0x02
> pchb21 at pci11 dev 6 function 0 vendor "Intel", unknown product 0x2db0 rev 
> 0x02
> pchb22 at pci11 dev 6 function 1 vendor "Intel", unknown product 0x2db1 rev 
> 0x02
> pchb23 at pci11 dev 6 function 2 vendor "Intel", unknown product 0x2db2 rev 
> 0x02
> pchb24 at pci11 dev 6 function 3 vendor "Intel", unknown product 0x2db3 rev 
> 0x02
> uhidev0 at uhub7 port 2 configuration 1 interface 0 "Dell Dell USB Keyboard" 
> rev 1.10/3.06 addr 2
> uhidev0: iclass 3/1
> ukbd0 at uhidev0: 8 variable keys, 6 key codes
> wskbd0 at ukbd0: console keyboard, using wsdisplay0
> vscsi0 at root
> scsibus4 at vscsi0: 256 targets
> softraid0 at root
> scsibus5 at softraid0: 256 targets
> root on sd0a (190c023aaaa894b4.a) swap on sd0b dump on sd0b
>
>
>
>
>

Reply via email to