Hi everyone. I've been trying to bring up an old Sun Enterprise Ultra 150,
with the following results. I keep thinking that there's something obvious
staring me in the face, but I don't see it. Can anyone help?
Thanks in advance!
Dave Klingler
Boot device: disk1:3 File and args:
OpenBSD IEEE 1275 Bootblock 1.1
..>> OpenBSD 3.8 (obj) #1: Thu Sep 1 17:32:37 MDT 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/sparc64/stand/ofwboot/obj
: trying bsd...
Booting /[EMAIL PROTECTED],0/SUNW,[EMAIL PROTECTED],8800000/[EMAIL
PROTECTED],0:3/bsd
[EMAIL PROTECTED]@[EMAIL PROTECTED]
symbols @ 0xffed8280 58+259056+154413 start=0x1000000
[ using 414176 bytes of bsd ELF symbol table ]
console is /[EMAIL PROTECTED],0/[EMAIL PROTECTED],1100000:a
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2005 OpenBSD. All rights reserved. http://www.OpenBSD.org
OpenBSD 3.8 (GENERIC) #607: Sat Sep 10 16:03:59 MDT 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/sparc64/compile/GENERIC
total memory = 268435456
avail memory = 234905600
using 1638 buffers containing 13418496 bytes of memory
bootpath: /[EMAIL PROTECTED],0/SUNW,[EMAIL PROTECTED],8800000/[EMAIL
PROTECTED],0:3
mainbus0 (root): Sun Ultra 2 UPA/SBus (2 X UltraSPARC 148MHz)
cpu0 at mainbus0: SUNW,UltraSPARC @ 148 MHz, version 0 FPU
cpu0: physical 32K instruction (32 b/l), 16K data (32 b/l), 512K external (64 b/
l)
timer0 at mainbus0 addr 0xfffc1c00 irq vectors 7f0 and 7f1
sbus0 at mainbus0 addr 0xfffcc000: clock = 25 MHz
STC0 on /mainbus enabled
DVMA map: ff800000 to ffffe000
IOTDB: 1362000 to 1364000
audiocs0 at sbus0 slot 13 offset 0xc000000 vector 24 ipl 8
audio0 at audiocs0
auxio0 at sbus0 slot 15 offset 0x1900000
flashprom at sbus0 slot 15 offset 0x0 not configured
fdc0 at sbus0 slot 15 offset 0x1400000 vector 29 ipl 11: no drives attached
clock1 at sbus0 slot 15 offset 0x1200000: mk48t59: hostid 807e7574
zs0 at sbus0 slot 15 offset 0x1100000 vector 28 ipl 12 softpri 6
zstty0 at zs0 channel 0 (console i/o)
zstty1 at zs0 channel 1
zs1 at sbus0 slot 15 offset 0x1000000 vector 28 ipl 12 softpri 6
zskbd0 at zs1 channel 0: no keyboard
zstty2 at zs1 channel 1: mouse
uperf0 at sbus0 slot 15 offset 0x1300000: model SUNW,sc-mp (0/3) ports 4
SUNW,pll at sbus0 slot 15 offset 0x1304000 not configured
esp0 at sbus0 slot 14 offset 0x8800000 vector 20 ipl 3: dma rev fas
esp0: FAS366/HME, 40MHz, SCSI ID 7
scsibus0 at esp0: 8 targets
sd0 at scsibus0 targ 1 lun 0: <SEAGATE, ST39102LC, 0004> SCSI2 0/direct fixed
sd0: 8683MB, 6962 cyl, 12 head, 212 sec, 512 bytes/sec, 17783240 sec total
cd0 at scsibus0 targ 6 lun 0: <TOSHIBA, XM-5401TASUN4XCD, 3485> SCSI2 5/cdrom re
movable
hme0 at sbus0 slot 14 offset 0x8c00000 vector 21 ipl 6: address 08:00:20:7e:75:7
4
nsphy0 at hme0 phy 1: DP83840 10/100 PHY, rev. 0
SUNW,bpp at sbus0 slot 14 offset 0xc800000 vector 22 ipl 2 not configured
cgsix0 at sbus0 slot 0 offset 0x0 vector 5 ipl 5: SUNW,501-2325, 1152x900, rev 1
1
wsdisplay0 at cgsix0
wsdisplay0: screen 0 added (std, sun emulation)
hme1 at sbus0 slot 2 offset 0x8c00000 vector 4 ipl 6: address 08:00:20:7e:75:74
nsphy1 at hme1 phy 1: DP83840 10/100 PHY, rev. 1
esp1 at sbus0 slot 2 offset 0x8800000 vector 3 ipl 3: dma rev fas
esp1: FAS366/HME, 40MHz, SCSI ID 7
scsibus1 at esp1: 8 targets
nf at sbus0 class network slot 3 offset 0x7ff0 vector 4 ipl 6 not configured
pcons at mainbus0 not configured
root on sd0c
rootdev=0xffff07d2 rrootdev=0xffff11d2 rawdev=0xffff11d2
panic: cannot open disk, 0xffff07d2/0xffff11d2, error 6
kdb breakpoint at 130bca0
Stopped at Debugger+0x4: nop
RUN AT LEAST 'trace' AND 'ps' AND INCLUDE OUTPUT WHEN REPORTING THIS PANIC!
DO NOT EVEN BOTHER REPORTING THIS WITHOUT INCLUDING THAT INFORMATION!
ddb> trace
dk_mountroot(187e000, 7f, 0, 1388c40, 1, 1800) at dk_mountroot+0x234
vfs_mountroot(180e110, 2, 1, 0, 7ffe, 1800) at vfs_mountroot+0x8c
main(0, 10d17a0, e000000010000074, 1800, 50, 100962c) at main+0x558
print_dtlb(800000, 800, 1000000, fffb1a70, 18, 33) at print_dtlb+0x4e4
ddb> ps
PID PPID PGRP UID S FLAGS WAIT COMMAND
3 0 0 0 2 0x100204 pfpurge
2 0 0 0 2 0x100204 kmthread
1 0 0 0 2 0x4 swapper
* 0 -1 0 0 7 0x80204 swapper
ddb>
