I am unable to boot OpenBSD 6.7 on an IGEL M320c machine I have. Booting
begins, but after the message
`0:1:0: mem address conflict 0x38000000/0x8000000`
appears, the screen appears to be cleared and the cursor continues
blinking on the bottom left of the screen. After a few seconds, it moves
a little past halfway on the screen and continues blinking. That is as
far as it gets.
Here's a video: https://www.youtube.com/watch?v=UX0Tsel6hzA
I obviously wasn't able to get OpenBSD to boot but here's a dmesg from
FreeBSD booted on the same machine (alternatively http://0x0.st/iOIZ.txt):
---<<BOOT>>---
Copyright (c) 1992-2019 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.1-RELEASE r354233 GENERIC amd64
FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on
LLVM 8.0.1)
VT(vga): resolution 640x480
CPU: VIA Eden X2 U4200 @ 1.0+ GHz (1000.06-MHz K8-class CPU)
Origin="CentaurHauls" Id=0x6fd Family=0x6 Model=0xf Stepping=13
Features=0xbfc9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x8863a9<SSE3,MON,VMX,EST,TM2,SSSE3,CX16,xTPR,SSE4.1,POPCNT>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
VIA Padlock Features=0x1ec33dcc<RNG,AES,AES-CTR,SHA1,SHA256,RSA>
VT-x: HLT,PAUSE
TSC: P-state invariant
real memory = 1073741824 (1024 MB)
avail memory = 863457280 (823 MB)
Event timer "LAPIC" quality 100
ACPI APIC Table: <VIA VIACRB >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 2 package(s) x 1 core(s)
random: unblocking device.
ioapic0: Changing APIC ID to 7
ioapic1: Changing APIC ID to 8
ioapic0 <Version 0.3> irqs 0-23 on motherboard
ioapic1 <Version 0.3> irqs 24-47 on motherboard
Launching APs: 1
Timecounter "TSC" frequency 1000062285 Hz quality 800
random: entropy device external interface
kbd1 at kbdmux0
000.000023 [4335] netmap_init netmap: loaded module
[ath_hal] loaded
module_register_init: MOD_LOAD (vesa, 0xffffffff8112e050, 0) error 19
random: registering fast source VIA Nehemiah Padlock RNG
random: fast provider: "VIA Nehemiah Padlock RNG"
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <VIA VIACRB> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
ACPI Error: Needed [Buffer/String/Package], found [Integer]
0xfffff8000337d280 (20181213/exresop-723)
ACPI Error: AE_AML_OPERAND_TYPE, While resolving operands for
[OpcodeName unavailable] (20181213/dswexec-606)
ACPI Error: Method parse/execution failed \134_PR.CPU0._OSC,
AE_AML_OPERAND_TYPE (20181213/psparse-689)
ACPI Error: Needed [Buffer/String/Package], found [Integer]
0xfffff80003384b00 (20181213/exresop-723)
ACPI Error: AE_AML_OPERAND_TYPE, While resolving operands for
[OpcodeName unavailable] (20181213/dswexec-606)
ACPI Error: Method parse/execution failed \134_PR.CPU0._OSC,
AE_AML_OPERAND_TYPE (20181213/psparse-689)
ACPI Error: Method parse/execution failed \134_PR.CPU0._PDC,
AE_AML_OPERAND_TYPE (20181213/psparse-689)
ACPI Error: Needed [Buffer/String/Package], found [Integer]
0xfffff8000337d100 (20181213/exresop-723)
ACPI Error: AE_AML_OPERAND_TYPE, While resolving operands for
[OpcodeName unavailable] (20181213/dswexec-606)
ACPI Error: Method parse/execution failed \134_PR.CPU1._OSC,
AE_AML_OPERAND_TYPE (20181213/psparse-689)
ACPI Error: Needed [Buffer/String/Package], found [Integer]
0xfffff80003384c80 (20181213/exresop-723)
ACPI Error: AE_AML_OPERAND_TYPE, While resolving operands for
[OpcodeName unavailable] (20181213/dswexec-606)
ACPI Error: Method parse/execution failed \134_PR.CPU1._OSC,
AE_AML_OPERAND_TYPE (20181213/psparse-689)
ACPI Error: Method parse/execution failed \134_PR.CPU1._PDC,
AE_AML_OPERAND_TYPE (20181213/psparse-689)
atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x75 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8
on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 450
Event timer "HPET2" frequency 14318180 Hz quality 450
attimer0: <AT timer> port 0x40-0x43 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_button0: <Sleep Button> on acpi0
acpi_button1: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: Length mismatch for 3 range: a8000001 vs a8000000
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> mem
0xf9000000-0xf9ffffff,0xf8000000-0xf8ffffff,0x38000000-0x3fffffff irq 40
at device 1.0 on pci0
vgapci0: Boot video device
hdac0: <VIA (0x9170) HDA Controller> mem 0xfb204000-0xfb207fff irq 41 at
device 1.1 on pci0
pcib1: <ACPI PCI-PCI bridge> irq 27 at device 3.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 31 at device 3.1 on pci0
pci2: <ACPI PCI bus> on pcib2
xhci0: <ASMedia ASM1042 USB 3.0 controller> mem 0xfb100000-0xfb107fff
irq 28 at device 0.0 on pci2
xhci0: 32 bytes context size, 32-bit DMA
xhci0: Unable to map MSI-X table
usbus0: waiting for BIOS to give up control
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pcib3: <ACPI PCI-PCI bridge> irq 35 at device 3.2 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> irq 39 at device 3.3 on pci0
pci4: <ACPI PCI bus> on pcib4
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port
0x1000-0x10ff mem 0xfa000000-0xfa000fff,0xf6800000-0xf6803fff irq 36 at
device 0.0 on pci4
re0: Using 1 MSI-X message
re0: Chip rev. 0x2c800000
re0: MAC rev. 0x00100000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX,
100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master,
1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow,
1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: 00:e0:c5:36:5e:3d
re0: netmap queues/slots: TX 1/256, RX 1/256
atapci0: <VIA VX900 SATA300 controller> port
0x3098-0x309f,0x30a4-0x30a7,0x3090-0x3097,0x30a0-0x30a3,0x3080-0x308f
irq 21 at device 15.0 on pci0
ata2: <ATA channel> at channel 0 on atapci0
ata3: <ATA channel> at channel 1 on atapci0
uhci0: <VIA 83C572 USB controller> port 0x3060-0x307f irq 20 at device
16.0 on pci0
usbus1 on uhci0
usbus1: 12Mbps Full Speed USB v1.0
uhci1: <VIA 83C572 USB controller> port 0x3040-0x305f irq 22 at device
16.1 on pci0
usbus2 on uhci1
usbus2: 12Mbps Full Speed USB v1.0
uhci2: <VIA 83C572 USB controller> port 0x3020-0x303f irq 21 at device
16.2 on pci0
usbus3 on uhci2
usbus3: 12Mbps Full Speed USB v1.0
uhci3: <VIA 83C572 USB controller> port 0x3000-0x301f irq 23 at device
16.3 on pci0
usbus4 on uhci3
usbus4: 12Mbps Full Speed USB v1.0
ehci0: <VIA VT6202 USB 2.0 controller> mem 0xfb208000-0xfb2080ff irq 23
at device 16.4 on pci0
usbus5: waiting for BIOS to give up control
usbus5: timed out waiting for BIOS
usbus5: EHCI version 1.0
usbus5 on ehci0
usbus5: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
pcib5: <ACPI PCI-PCI bridge> at device 19.0 on pci0
pci5: <ACPI PCI bus> on pcib5
hdac1: <VIA VT8251/8237A HDA Controller> mem 0xfb200000-0xfb203fff irq
17 at device 20.0 on pci0
uart0: <16950 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
orm0: <ISA Option ROM> at iomem 0xc0000-0xce7ff pnpid ORM0000 on isa0
vga0: <Generic ISA VGA> at port 0x3b0-0x3bb iomem 0xb0000-0xb7fff pnpid
PNP0900 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12.
est0: <Enhanced SpeedStep Frequency Control> on cpu0
Timecounters tick every 1.000 msec
hdacc0: <Realtek ALC662 HDA CODEC> at cad 0 on hdac1
hdaa0: <Realtek ALC662 Audio Function Group> at nid 1 on hdacc0
pcm0: <Realtek ALC662 (Analog)> at nid 20 and 24 on hdaa0
ugen5.1: <VIA EHCI root HUB> at usbus5
ugen3.1: <VIA UHCI root HUB> at usbus3
uhub0: <VIA EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
uhub1: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <VIA UHCI root HUB> at usbus4
ugen1.1: <VIA UHCI root HUB> at usbus1
uhub2: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
uhub3: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <VIA UHCI root HUB> at usbus2
uhub4: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen0.1: <0x1b21 XHCI root HUB> at usbus0
uhub5: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
uhub5: 4 ports with 4 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
ada0 at ata2 bus 0 scbus0 target 1 lun 0
ada0: <WDC SSD-S0002S-7100 2.1ME> ATA8-ACS SATA 2.x device
ada0: Serial Number WE41K7338767
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes)
ada0: 1907MB (3907008 512 byte sectors)
Trying to mount root from ufs:/dev/ada0s1a [rw]...
uhub0: 8 ports with 8 removable, self powered
lo0: link state changed to UP
re0: link state changed to DOWN
ugen3.2: <NOVATEK USB Keyboard> at usbus3
ukbd0 on uhub1
ukbd0: <NOVATEK USB Keyboard, class 0/0, rev 1.10/1.04, addr 2> on usbus3
kbd2 at ukbd0
re0: link state changed to UP
uhid0 on uhub1
uhid0: <NOVATEK USB Keyboard, class 0/0, rev 1.10/1.04, addr 2> on usbus3
