I saw this too. It has since been fixed in CVS, but there hasn't been a snapshot made since. I'm expecting it to be resolved in the next snapshot.
On Sat, Apr 18, 2020 at 03:50:44PM +0200, Alessandro De Laurenzis wrote: > Greetings, > > I've just updated my system to the latest available snapshot: > > OpenBSD theseus.atlantide.priv 6.7 GENERIC.MP#137 amd64 > > As soon as I launch tmux, my CPU jumps to a 100% utilization. > > The relevant lines from top: > > [...] > load averages: 0.92, 0.27, 0.14 theseus.atlantide.priv > 15:44:50 > 146 processes: 1 running, 142 idle, 1 dead, 2 on processor up > 0:46 > CPU0: 42.9% user, 0.0% nice, 51.3% sys, 5.8% spin, 0.0% intr, 0.0% idle > CPU1: 46.7% user, 0.0% nice, 47.5% sys, 5.8% spin, 0.0% intr, 0.0% idle > Memory: Real: 367M/1637M act/tot Free: 5978M Cache: 714M Swap: 0K/8114M > > PID USERNAME PRI NICE SIZE RES STATE WAIT TIME CPU COMMAND > 43835 just22 64 0 2164K 3176K run/0 - 0:32 79.49% tmux > 18000 just22 63 0 5752K 14M onproc/0 - 3:08 78.86% xterm > [...] > > Please find dmesg at the end of the message. Any hints? It's just me? > > All the best > > > OpenBSD 6.7-beta (GENERIC.MP) #137: Fri Apr 17 22:39:21 MDT 2020 > dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP > real mem = 8239386624 (7857MB) > avail mem = 7977066496 (7607MB) > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xdae9c000 (68 entries) > bios0: vendor LENOVO version "G1ETB8WW (2.78 )" date 09/19/2018 > bios0: LENOVO 2349KT5 > acpi0 at bios0: ACPI 5.0 > acpi0: sleep states S0 S3 S4 S5 > acpi0: tables DSDT FACP SLIC TCPA SSDT SSDT SSDT HPET APIC MCFG ECDT FPDT > ASF! UEFI UEFI POAT SSDT SSDT DMAR UEFI DBG2 > acpi0: wakeup devices LID_(S4) SLPB(S3) IGBE(S4) EXP3(S4) XHCI(S3) EHC1(S3) > EHC2(S3) HDEF(S4) > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpihpet0 at acpi0: 14318179 Hz > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz, 2594.51 MHz, 06-3a-09 > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN > cpu0: 256KB 64b/line 8-way L2 cache > cpu0: smt 0, core 0, package 0 > mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges > cpu0: apic clock running at 99MHz > cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE > cpu1 at mainbus0: apid 2 (application processor) > cpu1: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz, 2594.12 MHz, 06-3a-09 > cpu1: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN > cpu1: 256KB 64b/line 8-way L2 cache > cpu1: smt 0, core 1, package 0 > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins > acpimcfg0 at acpi0 > acpimcfg0: addr 0xf8000000, bus 0-63 > acpiec0 at acpi0 > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus -1 (PEG_) > acpiprt2 at acpi0: bus 2 (EXP1) > acpiprt3 at acpi0: bus 3 (EXP2) > acpiprt4 at acpi0: bus 4 (EXP3) > acpicpu0 at acpi0: C2(350@80 mwait.1@0x20), C1(1000@1 mwait.1), PSS > acpicpu1 at acpi0: C2(350@80 mwait.1@0x20), C1(1000@1 mwait.1), PSS > acpipwrres0 at acpi0: PUBS, resource for XHCI, EHC1, EHC2 > acpitz0 at acpi0: critical temperature is 200 degC > acpibtn0 at acpi0: LID_ > acpibtn1 at acpi0: SLPB > acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001 > acpicmos0 at acpi0 > acpibat0 at acpi0: BAT0 model "45N1001" serial 2729 type LION oem "SANYO" > acpiac0 at acpi0: AC unit online > "LEN0078" at acpi0 not configured > acpithinkpad0 at acpi0: version 1.0 > "PNP0C14" at acpi0 not configured > "PNP0C14" at acpi0 not configured > "PNP0C14" at acpi0 not configured > acpivideo0 at acpi0: VID_ > acpivout0 at acpivideo0: LCD0 > acpivideo1 at acpi0: VID_ > cpu0: using VERW MDS workaround (except on vmm entry) > cpu0: Enhanced SpeedStep 2594 MHz: speeds: 2601, 2600, 2500, 2400, 2300, > 2200, 2100, 2000, 1900, 1800, 1700, 1600, 1500, 1400, 1300, 1200 MHz > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "Intel Core 3G Host" rev 0x09 > inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 4000" rev 0x09 > drm0 at inteldrm0 > inteldrm0: msi, IVYBRIDGE, gen 7 > xhci0 at pci0 dev 20 function 0 "Intel 7 Series xHCI" rev 0x04: msi, xHCI 1.0 > usb0 at xhci0: USB revision 3.0 > uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 > addr 1 > "Intel 7 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured > em0 at pci0 dev 25 function 0 "Intel 82579LM" rev 0x04: msi, address > 00:21:cc:d7:43:44 > ehci0 at pci0 dev 26 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 16 > usb1 at ehci0: USB revision 2.0 > uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 > addr 1 > azalia0 at pci0 dev 27 function 0 "Intel 7 Series HD Audio" rev 0x04: msi > azalia0: codecs: Realtek ALC269, Intel/0x2806, using Realtek ALC269 > audio0 at azalia0 > ppb0 at pci0 dev 28 function 0 "Intel 7 Series PCIE" rev 0xc4: msi > pci1 at ppb0 bus 2 > sdhc0 at pci1 dev 0 function 0 "Ricoh 5U822 SD/MMC" rev 0x07: apic 2 int 16 > sdhc0: SDHC 3.0, 50 MHz base clock > sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed, dma > ppb1 at pci0 dev 28 function 1 "Intel 7 Series PCIE" rev 0xc4: msi > pci2 at ppb1 bus 3 > iwn0 at pci2 dev 0 function 0 "Intel Centrino Ultimate-N 6300" rev 0x3e: msi, > MIMO 3T3R, MoW, address 24:77:03:d8:9c:74 > ppb2 at pci0 dev 28 function 2 "Intel 7 Series PCIE" rev 0xc4: msi > pci3 at ppb2 bus 4 > ehci1 at pci0 dev 29 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 23 > usb2 at ehci1: USB revision 2.0 > uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 > addr 1 > pcib0 at pci0 dev 31 function 0 "Intel QM77 LPC" rev 0x04 > ahci0 at pci0 dev 31 function 2 "Intel 7 Series AHCI" rev 0x04: msi, AHCI 1.3 > ahci0: port 0: 6.0Gb/s > ahci0: port 1: 1.5Gb/s > scsibus1 at ahci0: 32 targets > sd0 at scsibus1 targ 0 lun 0: <ATA, KINGSTON SA400S3, R010> > naa.50026b77823f81ef > sd0: 228936MB, 512 bytes/sector, 468862128 sectors, thin > cd0 at scsibus1 targ 1 lun 0: <HL-DT-ST, DVDRAM GT50N, LT20> removable > ichiic0 at pci0 dev 31 function 3 "Intel 7 Series SMBus" rev 0x04: apic 2 int > 18 > iic0 at ichiic0 > spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-12800 SO-DIMM > spdmem1 at iic0 addr 0x51: 4GB DDR3 SDRAM PC3-10600 SO-DIMM > isa0 at pcib0 > isadma0 at isa0 > pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > pckbd0 at pckbc0 (kbd slot) > wskbd0 at pckbd0: console keyboard > pms0 at pckbc0 (aux slot) > wsmouse0 at pms0 mux 0 > wsmouse1 at pms0 mux 0 > pms0: Synaptics touchpad, firmware 7.2, 0x1c0b1 0xb40000 0x0 0xd047b1 0xa0000 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > vmm0 at mainbus0: VMX/EPT > uhidev0 at uhub0 port 1 configuration 1 interface 0 "Logitech USB Receiver" > rev 2.00/12.01 addr 2 > uhidev0: iclass 3/1 > ukbd0 at uhidev0: 8 variable keys, 6 key codes > wskbd1 at ukbd0 mux 1 > uhidev1 at uhub0 port 1 configuration 1 interface 1 "Logitech USB Receiver" > rev 2.00/12.01 addr 2 > uhidev1: iclass 3/1, 8 report ids > ums0 at uhidev1 reportid 2: 16 buttons, Z and W dir > wsmouse2 at ums0 mux 0 > uhid0 at uhidev1 reportid 3: input=4, output=0, feature=0 > uhid1 at uhidev1 reportid 4: input=1, output=0, feature=0 > uhid2 at uhidev1 reportid 8: input=1, output=0, feature=0 > uhidev2 at uhub0 port 1 configuration 1 interface 2 "Logitech USB Receiver" > rev 2.00/12.01 addr 2 > uhidev2: iclass 3/0, 33 report ids > uhid3 at uhidev2 reportid 16: input=6, output=6, feature=0 > uhid4 at uhidev2 reportid 17: input=19, output=19, feature=0 > uhid5 at uhidev2 reportid 32: input=14, output=14, feature=0 > uhid6 at uhidev2 reportid 33: input=31, output=31, feature=0 > umodem0 at uhub0 port 4 configuration 1 interface 1 "Lenovo H5321 gw" rev > 2.00/0.00 addr 3 > umodem0: data interface 2, has CM over data, has break > umodem0: status change notification available > ucom0 at umodem0 > umodem1 at uhub0 port 4 configuration 1 interface 3 "Lenovo H5321 gw" rev > 2.00/0.00 addr 3 > umodem1: data interface 4, has CM over data, has break > umodem1: status change notification available > ucom1 at umodem1 > umodem2 at uhub0 port 4 configuration 1 interface 9 "Lenovo H5321 gw" rev > 2.00/0.00 addr 3 > umodem2: data interface 10, has CM over data, has break > umodem2: status change notification available > ucom2 at umodem2 > ugen0 at uhub0 port 4 configuration 1 "Lenovo H5321 gw" rev 2.00/0.00 addr 3 > uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" > rev 2.00/0.00 addr 2 > ugen1 at uhub3 port 1 "Lenovo Integrated Smart Card Reader" rev 2.00/1.00 > addr 3 > uhub4 at uhub3 port 2 configuration 1 interface 0 "Genesys Logic USB2.0 Hub" > rev 2.00/9.01 addr 4 > uhub5 at uhub4 port 1 configuration 1 interface 0 "Genesys Logic USB2.0 Hub" > rev 2.00/9.01 addr 5 > uhidev3 at uhub4 port 3 configuration 1 interface 0 "CHICONY HP Basic USB > Keyboard" rev 1.10/3.00 addr 6 > uhidev3: iclass 3/1 > ukbd1 at uhidev3: 8 variable keys, 6 key codes > wskbd2 at ukbd1 mux 1 > uhidev4 at uhub4 port 4 configuration 1 interface 0 "Logitech USB-PS/2 > Optical Mouse" rev 2.00/27.20 addr 7 > uhidev4: iclass 3/1 > ums1 at uhidev4: 8 buttons, Z and W dir > wsmouse3 at ums1 mux 0 > uvideo0 at uhub3 port 6 configuration 1 interface 0 "Chicony Electronics Co., > Ltd. Integrated Camera" rev 2.00/5.64 addr 8 > video0 at uvideo0 > uhub6 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" > rev 2.00/0.00 addr 2 > vscsi0 at root > scsibus2 at vscsi0: 256 targets > softraid0 at root > scsibus3 at softraid0: 256 targets > root on sd0a (7a2ec63fbc88653a.a) swap on sd0b dump on sd0b > inteldrm0: 1366x768, 32bpp > wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0 > wskbd1: connecting to wsdisplay0 > wskbd2: connecting to wsdisplay0 > wsdisplay0: screen 1-5 added (std, vt100 emulation) > > -- > Alessandro De Laurenzis > [mailto:jus...@atlantide.mooo.com] > Web: http://www.atlantide.mooo.com > LinkedIn: http://it.linkedin.com/in/delaurenzis -- Andreas (Kusalananda) Kähäri SciLifeLab, NBIS, ICM Uppsala University, Sweden .
