Hello Misc,
I noticed Ethernet channel "Marvell Yukon 88E8072" freezes within a
minute unless network speed is set to 100baseTX in "hostname.msk0":
media 100baseTX
dhcp
During installation the "msk0" got DHCP address spuriously,
ifconfig down/up does not help.
FreeBSD has had the same problem.
However, NetBSD 9.0 did not have this problem.
---------------- dmesg -----------------
OpenBSD 6.6 (GENERIC) #6: Thu Mar 12 09:36:01 MDT 2020
r...@syspatch-66-i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
real mem = 2138390528 (2039MB)
avail mem = 2083741696 (1987MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: date 06/18/09, BIOS32 rev. 0 @ 0xf0000, SMBIOS rev.
2.4 @ 0xf3d99 (23 entries)
bios0: vendor Hewlett-Packard version "68DGU Ver. F.04" date 06/18/2009
bios0: Hewlett-Packard HP 2140
acpi0 at bios0: ACPI 4.0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SLIC HPET APIC MCFG TCPA SSDT SSDT SSDT SSDT
acpi0: wakeup devices C09B(S5) C0F6(S3) C0FD(S3) C0FE(S3) C100(S3)
C107(S5) C1E6(S5) C1E7(S5) C11D(S5) C1EF(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz ("GenuineIntel" 686-class)
1.60 GHz, 06-1c-02
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,EST,TM2,SSSE3,xTPR,PDCM,MOVBE,NXE,LAHF,PERF,SENSOR,MELTDOWN
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 132MHz
cpu0: mwait min=64, max=64, C-substates=0.2.2.0.2, IBE
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins, remapped
acpimcfg0 at acpi0
acpimcfg0: addr 0xf8000000, bus 0-63
acpiprt0 at acpi0: bus 0 (C002)
acpiprt1 at acpi0: bus 2 (C09B)
acpiprt2 at acpi0: bus 8 (C107)
acpiprt3 at acpi0: bus 32 (C11D)
acpiec0 at acpi0
acpicpu0 at acpi0: !C2(500@20 mwait.1@0x10), C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: C1DA, resource for C1D8
acpipwrres1 at acpi0: C1DD, resource for C126
acpipwrres2 at acpi0: C2E2, resource for C2E7
acpipwrres3 at acpi0: C2E3, resource for C2E8
acpipwrres4 at acpi0: C2E4, resource for C2E9
acpipwrres5 at acpi0: C2E5, resource for C2EA
acpipwrres6 at acpi0: C2E6, resource for C2EB
acpitz0 at acpi0: critical temperature is 95 degC
acpitz1 at acpi0: critical temperature is 105 degC
acpitz2 at acpi0: critical temperature is 75 degC
acpitz3 at acpi0: critical temperature is 105 degC
acpitz4 at acpi0: critical temperature is 110 degC
"PNP0A08" at acpi0 not configured
acpicmos0 at acpi0
"SYN013D" at acpi0 not configured
"HPQ0004" at acpi0 not configured
"HPQ0006" at acpi0 not configured
acpibat0 at acpi0: C1C8 model "Primary" serial 01618 2009/05/20 type
LIon oem "Hewlett-Packard"
acpiac0 at acpi0: AC unit online
acpibtn0 at acpi0: C1FD
acpibtn1 at acpi0: C1CC
"PNP0C14" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
acpivideo0 at acpi0: C088
acpivout0 at acpivideo0: C147
bios0: ROM list: 0xc0000/0xec00!
cpu0: Enhanced SpeedStep 1597 MHz: speeds: 1600, 1333, 1067, 800 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945GME Host" rev 0x03
inteldrm0 at pci0 dev 2 function 0 "Intel 82945GME Video" rev 0x03
drm0 at inteldrm0
intagp0 at inteldrm0
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
inteldrm0: apic 1 int 16
"Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x01: msi
azalia0: codecs: Analog Devices AD1984A
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01: apic 1 int 16
pci1 at ppb0 bus 8
"Broadcom BCM4322" rev 0x01 at pci1 dev 0 function 0 not configured
ppb1 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x01: apic 1 int 19
pci2 at ppb1 bus 32
mskc0 at pci2 dev 0 function 0 "Marvell Yukon 88E8072" rev 0x10, Yukon-2
Extreme rev. B0 (0x2): msi
msk0 at mskc0 port A: address 00:25:b3:6a:b8:93
eephy0 at msk0 phy 0: 88E1149 Gigabit PHY, rev. 1
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 1 int 20
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 1 int 21
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 1 int 18
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 1 int 19
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 1 int 20
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
ppb2 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe1
pci3 at ppb2 bus 2
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x01: PM
disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA,
channel 0 configured to compatibility, channel 1 configured to compatibility
pciide0: channel 0 disabled (no drives)
pciide0: channel 1 ignored (disabled)
ahci0 at pci0 dev 31 function 2 "Intel 82801GBM AHCI" rev 0x01: msi,
AHCI 1.1
ahci0: port 0: 1.5Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, Samsung SSD 860, RVT0>
naa.5002538e90271a64
sd0: 476940MB, 512 bytes/sector, 976773168 sectors, thin
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 configuration 1 interface 0 "Intel UHCI root hub" rev
1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev
1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev
1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev
1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pms0: Synaptics touchpad, firmware 6.5, 0x1c0b1 0xa00000
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (fa557e90c5501b02.a) swap on sd0b dump on sd0b
inteldrm0: 1024x576, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
