This is current/armv7 on a BeagleBone Black (dmesg below).
I am trying to upgrade with sysupgrade -s.
It downloads the sets, reboots, starts installing,
but does not quite finish:
[...]
Welcome to the OpenBSD/armv7 6.6 installation program.
Performing non-interactive upgrade...
Terminal type? [vt220] vt220
Available disks are: sd0.
Which disk is the root disk? ('?' for details) [sd0] sd0
Checking root filesystem (fsck -fp /dev/sd0a)... OK.
Mounting root filesystem (mount -o ro /dev/sd0a /mnt)... OK.
Force checking of clean non-root filesystems? [no] no
fsck -p 93aae518915c8841.d... OK.
fsck -p 93aae518915c8841.e... OK.
fsck -p 93aae518915c8841.f... OK.
fsck -p 93aae518915c8841.g... OK.
fsck -p 93aae518915c8841.h... OK.
fsck -p 93aae518915c8841.j... OK.
fsck -p 93aae518915c8841.k... OK.
fsck -p 93aae518915c8841.l... OK.
fsck -p 93aae518915c8841.m... OK.
/dev/sd0a (93aae518915c8841.a) on /mnt type ffs (rw, local)
/dev/sd0d (93aae518915c8841.d) on /mnt/usr type ffs (rw, local, noatime, nodev)
/dev/sd0e (93aae518915c8841.e) on /mnt/usr/local type ffs (rw, local, noatime,
nodev, wxallowed)
/dev/sd0f (93aae518915c8841.f) on /mnt/var type ffs (rw, local, noatime, nodev,
nosuid)
/dev/sd0g (93aae518915c8841.g) on /mnt/var/log type ffs (rw, local, noatime,
nodev, nosuid)
/dev/sd0h (93aae518915c8841.h) on /mnt/var/www type ffs (rw, local, noatime,
nodev, nosuid)
/dev/sd0j (93aae518915c8841.j) on /mnt/var/mail type ffs (rw, local, noatime,
nodev, nosuid)
/dev/sd0k (93aae518915c8841.k) on /mnt/tmp type ffs (rw, local, noatime, nodev,
nosuid)
/dev/sd0l (93aae518915c8841.l) on /mnt/home type ffs (rw, local, noatime,
nodev, nosuid)
/dev/sd0m (93aae518915c8841.m) on /mnt/backup type ffs (rw, local, noatime,
nodev, nosuid)
Let's upgrade the sets!
Location of sets? (disk http nfs or 'done') [http] disk
Is the disk partition already mounted? [yes] yes
Pathname to the sets? (or 'done') [6.6/armv7] /home/_sysupgrade/
Select sets by entering a set name, a file name pattern or 'all'. De-select
sets by prepending a '-', e.g.: '-game*'. Selected sets are labelled '[X]'.
[X] bsd [X] comp66.tgz [X] xbase66.tgz [X] xserv66.tgz
[X] bsd.rd [X] man66.tgz [X] xshare66.tgz
[X] base66.tgz [X] game66.tgz [X] xfont66.tgz
Set name(s)? (or 'abort' or 'done') [done] done
Directory does not contain SHA256.sig. Continue without verification? [no] yes
Installing bsd 100% |**************************| 6248 KB 00:05 ETA
Installing bsd.rd 100% |**************************| 11229 KB 00:10 ETA
Installing base66.tgz 100% |**************************| 99116 MB - 07:12edT-
Installing comp66.tgz 83% |********************* | 45312 KB -
stalledT-syncing disks... done
rebooting...
Why does it reboot here? The SD card is slow, and is being both read
and written at this point, but even if it stalled the installer horribly,
it would not reboot, right?
Yes, there is space on the filesystem.
Yes, the sets are completely downloaded,
and the hashes have been verified (also checked manualy).
A manual upgrade goes just fine.
Jan
OpenBSD 6.6-current (GENERIC) #248: Mon Jan 6 12:02:06 MST 2020
dera...@armv7.openbsd.org:/usr/src/sys/arch/armv7/compile/GENERIC
real mem = 477814784 (455MB)
avail mem = 458121216 (436MB)
mainbus0 at root: TI AM335x BeagleBone Black
cpu0 at mainbus0 mpidr 0: ARM Cortex-A8 r3p2
cpu0: 32KB 64b/line 4-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
cpu0: 256KB 64b/line 8-way L2 cache
omap0 at mainbus0
prcm0 at omap0 rev 0.2
dmtimer0 at omap0 rev 3.1
dmtimer1 at omap0 rev 3.1
simplebus0 at mainbus0: "ocp"
simplebus1 at simplebus0: "l4_wkup"
"wkup_m3" at simplebus1 not configured
simplebus2 at simplebus1: "prcm"
"l4_per_cm" at simplebus2 not configured
"l4_wkup_cm" at simplebus2 not configured
"mpu_cm" at simplebus2 not configured
"l4_rtc_cm" at simplebus2 not configured
"gfx_l3_cm" at simplebus2 not configured
"l4_cefuse_cm" at simplebus2 not configured
simplebus3 at simplebus1: "scm"
syscon0 at simplebus3: "scm_conf"
pinctrl0 at simplebus3
"wkup_m3_ipc" at simplebus3 not configured
"dma-router" at simplebus3 not configured
intc0 at simplebus0 rev 5.0
"edma" at simplebus0 not configured
"tptc" at simplebus0 not configured
"tptc" at simplebus0 not configured
"tptc" at simplebus0 not configured
omgpio0 at simplebus0: rev 0.1
gpio0 at omgpio0: 32 pins
omgpio1 at simplebus0: rev 0.1
gpio1 at omgpio1: 32 pins
omgpio2 at simplebus0: rev 0.1
gpio2 at omgpio2: 32 pins
omgpio3 at simplebus0: rev 0.1
gpio3 at omgpio3: 32 pins
com0 at simplebus0: ti16750, 64 byte fifo
com0: console
tiiic0 at simplebus0 rev 0.11
iic0 at tiiic0
"ti,tps65217" at iic0 addr 0x24 not configured
"atmel,24c256" at iic0 addr 0x50 not configured
nxphdmi0 at iic0 addr 0x70: rev 0x0301
nxphdmi0: no display detected
tiiic1 at simplebus0 rev 0.11
iic1 at tiiic1
"atmel,24c256" at iic1 addr 0x54 not configured
"atmel,24c256" at iic1 addr 0x55 not configured
"atmel,24c256" at iic1 addr 0x56 not configured
"atmel,24c256" at iic1 addr 0x57 not configured
ommmc0 at simplebus0
sdmmc0 at ommmc0: 4-bit, sd high-speed, mmc high-speed
ommmc1 at simplebus0
sdmmc1 at ommmc1: 1-bit
"spinlock" at simplebus0 not configured
omdog0 at simplebus0 rev 0.1
"mailbox" at simplebus0 not configured
"timer" at simplebus0 not configured
"timer" at simplebus0 not configured
"timer" at simplebus0 not configured
"timer" at simplebus0 not configured
"timer" at simplebus0 not configured
"timer" at simplebus0 not configured
"timer" at simplebus0 not configured
"rtc" at simplebus0 not configured
"usb" at simplebus0 not configured
cpsw0 at simplebus0: version 1.12 (0), address 90:59:af:82:2e:7e
ukphy0 at cpsw0 phy 0: Generic IEEE 802.3u media interface, rev. 1: OUI
0x0001f0, model 0x000f
"ocmcram" at simplebus0 not configured
amdisplay0 at simplebus0
amdisplay0: no display attached.
"emif" at simplebus0 not configured
"sham" at simplebus0 not configured
"aes" at simplebus0 not configured
"mcasp" at simplebus0 not configured
"rng" at simplebus0 not configured
scsibus0 at sdmmc1: 2 targets, initiator 0
sd0 at scsibus0 targ 1 lun 0: <SD/MMC, MMC02G, 0000> removable
sd0: 1832MB, 512 bytes/sector, 3751936 sectors
scsibus1 at sdmmc0: 2 targets, initiator 0
sd1 at scsibus1 targ 1 lun 0: <SD/MMC, SU32G, 0080> removable
sd1: 30436MB, 512 bytes/sector, 62333952 sectors
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
bootfile: sd0a:/bsd
boot device: sd0
root on sd1a (93aae518915c8841.a) swap on sd1b dump on sd1b
WARNING: CHECK AND RESET THE DATE!
