On Mon, Sep 02, 2019 at 05:32:53PM +0300, Kihaguru Gathura wrote:
> Hi,
>
> Unable to boot with the following message
>
> open /pci@83,4000/FJSV,ulsa@2,1/disk@0,0:a/etc/random.seed: Invalid argument
> open /pci@83,4000/FJSV,ulsa@2,1/disk@0,0:a/bsd: Invalid argument
>
> Not sure the issue with softraid setup detailed below. Any assistance
> highly appreciated.
>
> Thanks and regards,
Did you setup boot-file?
Try
boot sr0a:/bsd
On the OpenBSD boot loader prompt.
If that works you should setup boot-file as described in
See http://man.openbsd.org/man8/sparc64/boot_sparc64.8
-Otto
>
> Kihaguru.
>
>
> {0} ok boot cdrom
> Resetting ...
>
> Sep 02 08:57:03 GMT 2019 XSCF:I::[02030100] Start reset sequence
> Sep 02 08:57:04 GMT 2019 XSCF:I::[02030200] Reset released...
>
> Sep 02 08:57:07 GMT 2019 PowerOn SelfTest start
> POST:Testing Flash/SRAM
> POST:Testing SC
> POST:Testing XSCF
> POST:Banner
> POST:FATAL check
> POST:Testing Timer1
> POST:Testing Tick
> POST:Testing MMU
> POST:Testing CPU Type
> POST:Testing DTAG
> POST:Memory Probe
> POST:Testing Memory
> POST:Testing Softint
> POST:Testing U2P
> POST:Testing Slave Device
> POST:Testing Master Device
> POST:System Configure
> POST:OBP Start
> screen not found.
> keyboard not found.
> Keyboard not present. Using ttya for input and output.
>
> Fujitsu Siemens PRIMEPOWER250 2x SPARC64 V, No Keyboard
> OpenBoot 3.18.1-1, 16384 MB memory installed
> Ethernet address 0:b:5d:f3:a7:5c, Host ID: 80f2a75c.
> XSCF Version: 4.12.1
>
>
>
> Executing last command: boot cdrom
> Boot device: /pci@83,4000/ide@d/cdrom@0,0:f File and args:
> OpenBSD IEEE 1275 Bootblock 1.4
> ..>> OpenBSD BOOT 1.12
> Trying bsd...
> open /pci@83,4000/ide@d/cdrom@0,0:f/etc/random.seed: No such file or
> directory
> Booting /pci@83,4000/ide@d/cdrom@0,0:f/bsd
> 4145224@0x1000000+8120@0x13f4048+3255632@0x1c00000+938672@0x1f1ad50
> symbols @ 0xfeae4340 139 start=0x1000000
> console is /pci@83,4000/isa@7/su@0,3f8
> Copyright (c) 1982, 1986, 1989, 1991, 1993
> The Regents of the University of California. All rights reserved.
> Copyright (c) 1995-2019 OpenBSD. All rights reserved.
> https://www.OpenBSD.org
>
> OpenBSD 6.5 (RAMDISK) #156: Sun Apr 14 05:14:17 MDT 2019
> dera...@sparc64.openbsd.org:/usr/src/sys/arch/sparc64/compile/RAMDISK
> real mem = 17179869184 (16384MB)
> avail mem = 16869081088 (16087MB)
> mainbus0 at root: Fujitsu Siemens PRIMEPOWER250 2x SPARC64 V
> cpu0 at mainbus0: FJSV,SPARC64-V (rev 5.1) @ 1979 MHz
> cpu0: physical 128K instruction (64 b/l), 128K data (64 b/l), 3072K
> external (64 b/l)
> "FJSV,SPARC64-V" at mainbus0 not configured
> psycho0 at mainbus0 addr 0xfffb2000: SUNW,psycho, impl 0, version 4, ign c0
> psycho0: bus range 0-0, PCI bus 0
> psycho0: dvma map fe000000-ffffffff, STC0 enabled
> pci0 at psycho0
> ebus0 at pci0 dev 1 function 0 "Sun PCIO EBus2" rev 0x01
> "FJSV,scfc" at ebus0 addr 210000-210085, 220000-220031, 260000-260001,
> 270000-28ffff ivec 0x23 not configured
> "FJSV,flashprom" at ebus0 addr 0-3fffff not configured
> clock1 at ebus0 addr 250000-251fff: mk48t59
> "FJSV,panel" at ebus0 addr 210011-210011 ivec 0x25 not configured
> ebus1 at pci0 dev 7 function 0 "Acer Labs M1533 ISA" rev 0x00
> com0 at ebus1 addr 3f8-3ff ivec 0x2b: ns16550a, 16 byte fifo
> com0: console
> com1 at ebus1 addr 2e8-2ef ivec 0x2b: ns16550a, 16 byte fifo
> hme0 at pci0 dev 1 function 1 "Sun HME" rev 0x01: ivec 0xe1, address
> 00:0b:5d:f3:a7:5c
> nsphyter0 at hme0 phy 1: DP83843 10/100 PHY, rev. 0
> mpi0 at pci0 dev 2 function 1 "Symbios Logic 53c1030" rev 0x07: ivec 0xe0
> mpi0: 0, firmware 1.0.12.0
> scsibus0 at mpi0: 16 targets, initiator 7
> sd0 at scsibus0 targ 0 lun 0: <FUJITSU, MAT3073N SUN72G, 0602> SCSI2
> 0/direct fixed serial.FUJITSU_MAT3073N_SUN72G_000506B00RAR_AAN0P5200RAR
> sd0: 70007MB, 512 bytes/sector, 143374738 sectors
> sd1 at scsibus0 targ 1 lun 0: <FUJITSU, MAT3073N SUN72G, 0602> SCSI2
> 0/direct fixed serial.FUJITSU_MAT3073N_SUN72G_000506B00SSL_AAN0P5200SSL
> sd1: 70007MB, 512 bytes/sector, 143374738 sectors
> mpi0: target 0 Sync at 160MHz width 16bit offset 127 QAS 1 DT 1 IU 1
> mpi0: target 1 Sync at 160MHz width 16bit offset 127 QAS 1 DT 1 IU 1
> pciide0 at pci0 dev 13 function 0 "Acer Labs M5229 UDMA IDE" rev 0xc4: DMA,
> channel 0 configured to native-PCI, channel 1 configured to native-PCI
> pciide0: using ivec 0xe4 for native-PCI interrupt
> atapiscsi0 at pciide0 channel 0 drive 0
> scsibus1 at atapiscsi0: 2 targets
> cd0 at scsibus1 targ 0 lun 0: <MATSHITA, DVD-ROM SR-8178, PY28> ATAPI
> 5/cdrom removable
> cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
> pciide0: channel 1 disabled (no drives)
> ohci0 at pci0 dev 10 function 0 "Acer Labs M5237 USB" rev 0x03: ivec 0xe9,
> version 1.0, legacy support
> usb0 at ohci0: USB revision 1.0
> uhub0 at usb0 configuration 1 interface 0 "Acer Labs OHCI root hub" rev
> 1.00/1.00 addr 1
> psycho1 at mainbus0 addr 0xfff9e000: SUNW,psycho, impl 0, version 4, ign c0
> psycho1: bus range 128-128, PCI bus 128
> psycho1: dvma map fe000000-ffffffff, STC0 enabled, STC1 enabled
> pci1 at psycho1
> bge0 at pci1 dev 1 function 0 "Fujitsu PRIMEPOWER250/450 LAN" rev 0x02,
> BCM5702/5703 A2 (0x1002): ivec 0xc0, address 00:0b:5d:f4:27:5c
> brgphy0 at bge0 phy 1: BCM5703 10/100/1000baseT PHY, rev. 2
> timer0 at mainbus0 addr 0xfff8bc00 ivec 0xec, 0xed
> softraid0 at root
> scsibus2 at softraid0: 256 targets
> bootpath: /pci@83,4000/ide@d,0/cdrom@0,0:f
> root on rd0a swap on rd0b dump on rd0b
> erase ^?, werase ^W, kill ^U, intr ^C, status ^T
>
> Welcome to the OpenBSD/sparc64 6.5 installation program.
> (I)nstall, (U)pgrade, (A)utoinstall or (S)hell? I
> At any prompt except password prompts you can escape to a shell by
> typing '!'. Default answers are shown in []'s and are selected by
> pressing RETURN. You can exit this program at any time by pressing
> Control-C, but this can leave your system in an inconsistent state.
>
> Terminal type? [sun]
> ~
> ~
> ~
> ~
> Available disks are: sd0 sd1.
> Which disk is the root disk? ('?' for details) [sd0] !
> Type 'exit' to return to install.
> www# dd if=/dev/urandom of=/dev/rsd0c bs=1m
> dd: /dev/rsd0c: short write on character device
> dd: /dev/rsd0c: end of device
> 70008+0 records in
> 70007+1 records out
> 73407865856 bytes transferred in 2026.673 secs (36220859 bytes/sec)
> www# dd if=/dev/urandom of=/dev/rsd1c bs=1m
> dd: /dev/rsd1c: short write on character device
> dd: /dev/rsd1c: end of device
> 70008+0 records in
> 70007+1 records out
> 73407865856 bytes transferred in 2029.361 secs (36172892 bytes/sec)
> www# cd /dev
> www# ls
> MAKEDEV rd0c rsd1d rsd2n rwd1g sd0a sd1k urandom wd1j
> bio rfd0a rsd1e rsd2o rwd1h sd0b sd1l wd0a wd1k
> bpf rfd0b rsd1f rsd2p rwd1i sd0c sd1m wd0b wd1l
> bpf0 rfd0c rsd1g rst0 rwd1j sd0d sd1n wd0c wd1m
> cd0a rfd0i rsd1h rwd0a rwd1k sd0e sd1o wd0d wd1n
> cd0c rrd0a rsd1i rwd0b rwd1l sd0f sd1p wd0e wd1o
> console rrd0c rsd1j rwd0c rwd1m sd0g sd2a wd0f wd1p
> diskmap rsd0a rsd1k rwd0d rwd1n sd0h sd2b wd0g wd2a
> enrst0 rsd0b rsd1l rwd0e rwd1o sd0i sd2c wd0h wd2b
> erst0 rsd0c rsd1m rwd0f rwd1p sd0j sd2d wd0i wd2c
> fd0a rsd0d rsd1n rwd0g rwd2a sd0k sd2e wd0j wd2d
> fd0b rsd0e rsd1o rwd0h rwd2b sd0l sd2f wd0k wd2e
> fd0c rsd0f rsd1p rwd0i rwd2c sd0m sd2g wd0l wd2f
> fd0i rsd0g rsd2a rwd0j rwd2d sd0n sd2h wd0m wd2g
> klog rsd0h rsd2b rwd0k rwd2e sd0o sd2i wd0n wd2h
> kmem rsd0i rsd2c rwd0l rwd2f sd0p sd2j wd0o wd2i
> ksyms rsd0j rsd2d rwd0m rwd2g sd1a sd2k wd0p wd2j
> mdesc rsd0k rsd2e rwd0n rwd2h sd1b sd2l wd1a wd2k
> mem rsd0l rsd2f rwd0o rwd2i sd1c sd2m wd1b wd2l
> nrst0 rsd0m rsd2g rwd0p rwd2j sd1d sd2n wd1c wd2m
> null rsd0n rsd2h rwd1a rwd2k sd1e sd2o wd1d wd2n
> openprom rsd0o rsd2i rwd1b rwd2l sd1f sd2p wd1e wd2o
> random rsd0p rsd2j rwd1c rwd2m sd1g stderr wd1f wd2p
> rcd0a rsd1a rsd2k rwd1d rwd2n sd1h stdin wd1g zero
> rcd0c rsd1b rsd2l rwd1e rwd2o sd1i stdout wd1h
> rd0a rsd1c rsd2m rwd1f rwd2p sd1j tty wd1i
> www# disklabel -E sd0
> This platform requires that partition offsets/sizes be on cylinder
> boundaries.
> Partition offsets/sizes will be rounded to the nearest cylinder
> automatically.
> Label editor (enter '?' for help at any prompt)
> sd0> p
> OpenBSD area: 0-143374738; size: 143374738; free: 143374738
> # size offset fstype [fsize bsize cpg]
> c: 143374738 0 unused
> sd0> q
> No label changes.
> www# disklabel -E sd1
> This platform requires that partition offsets/sizes be on cylinder
> boundaries.
> Partition offsets/sizes will be rounded to the nearest cylinder
> automatically.
> Label editor (enter '?' for help at any prompt)
> sd1> p
> OpenBSD area: 0-143374738; size: 143374738; free: 143374738
> # size offset fstype [fsize bsize cpg]
> c: 143374738 0 unused
> sd1> q
> No label changes.
> www# disklabel -E sd2
> disklabel: /dev/rsd2c: Device not configured
> www# fdisk -iy sd0
> sh: fdisk: not found
> www# disklabel -E sd0
> This platform requires that partition offsets/sizes be on cylinder
> boundaries.
> Partition offsets/sizes will be rounded to the nearest cylinder
> automatically.
> Label editor (enter '?' for help at any prompt)
> sd0> a
> partition: [a]
> offset: [0]
> size: [143374738] *
> FS type: [4.2BSD] RAID
> sd0> w
> sd0> q
> No label changes.
> www# disklabel sd0 > layout
> www# disklabel -R sd1 layout
> www# rm layout
> www# bioctl -c 1 -l sd0a,sd1a softraid0
> sd2 at scsibus2 targ 1 lun 0: <OPENBSD, SR RAID 1, 006> SCSI2 0/direct fixed
> sd2: 70002MB, 512 bytes/sector, 143366016 sectors
> softraid0: RAID 1 volume attached as sd2
> www# dd if=/dev/zero of=/dev/rsd2c bs=1m count=1
> 1+0 records in
> 1+0 records out
> 1048576 bytes transferred in 0.033 secs (31058796 bytes/sec)
> www# bioctl sd2
> Volume Status Size Device
> softraid0 0 Online 73403400192 sd2 RAID1
> 0 Online 73403400192 0:0.0 noencl <sd0a>
> 1 Online 73403400192 0:1.0 noencl <sd1a>
> www# exit
> Available disks are: sd0 sd1 sd2.
> Which disk is the root disk? ('?' for details) [sd0] sd2
> The auto-allocated layout for sd2 is:
> # size offset fstype [fsize bsize cpg]
> a: 1.0G 0 4.2BSD 2048 16384 1 # /
> b: 5.9G 2104515 swap
> c: 68.4G 0 unused
> d: 4.0G 14442435 4.2BSD 2048 16384 1 # /tmp
> e: 7.6G 22844430 4.2BSD 2048 16384 1 # /var
> f: 2.0G 38829105 4.2BSD 2048 16384 1 # /usr
> g: 1.0G 43038135 4.2BSD 2048 16384 1 #
> /usr/X11R6
> h: 9.7G 45142650 4.2BSD 2048 16384 1 #
> /usr/local
> i: 2.0G 65497005 4.2BSD 2048 16384 1 # /usr/src
> j: 6.0G 69706035 4.2BSD 2048 16384 1 # /usr/obj
> k: 29.1G 82300995 4.2BSD 2048 16384 1 # /home
> Use (A)uto layout, (E)dit auto layout, or create (C)ustom layout? [a]
> /dev/rsd2a: 1027.6MB in 2104512 sectors of 512 bytes
> 6 cylinder groups of 202.47MB, 12958 blocks, 25984 inodes each
> /dev/rsd2k: 29815.9MB in 61063064 sectors of 512 bytes
> 148 cylinder groups of 202.47MB, 12958 blocks, 25984 inodes each
> /dev/rsd2d: 4102.5MB in 8401992 sectors of 512 bytes
> 21 cylinder groups of 202.47MB, 12958 blocks, 25984 inodes each
> /dev/rsd2f: 2055.2MB in 4209028 sectors of 512 bytes
> 11 cylinder groups of 202.47MB, 12958 blocks, 25984 inodes each
> /dev/rsd2g: 1027.6MB in 2104512 sectors of 512 bytes
> 6 cylinder groups of 202.47MB, 12958 blocks, 25984 inodes each
> /dev/rsd2h: 9938.6MB in 20354352 sectors of 512 bytes
> 50 cylinder groups of 202.47MB, 12958 blocks, 25984 inodes each
> /dev/rsd2j: 6149.9MB in 12594960 sectors of 512 bytes
> 31 cylinder groups of 202.47MB, 12958 blocks, 25984 inodes each
> /dev/rsd2i: 2055.2MB in 4209028 sectors of 512 bytes
> 11 cylinder groups of 202.47MB, 12958 blocks, 25984 inodes each
> /dev/rsd2e: 7805.0MB in 15984672 sectors of 512 bytes
> 39 cylinder groups of 202.47MB, 12958 blocks, 25984 inodes each
> Available disks are: sd0 sd1.
> Which disk do you wish to initialize? (or 'done') [done]
> /dev/sd2a (f17019aae84f4ec9.a) on /mnt type ffs (rw, asynchronous, local)
> /dev/sd2k (f17019aae84f4ec9.k) on /mnt/home type ffs (rw, asynchronous,
> local, nodev, nosuid)
> /dev/sd2d (f17019aae84f4ec9.d) on /mnt/tmp type ffs (rw, asynchronous,
> local, nodev, nosuid)
> /dev/sd2f (f17019aae84f4ec9.f) on /mnt/usr type ffs (rw, asynchronous,
> local, nodev)
> /dev/sd2g (f17019aae84f4ec9.g) on /mnt/usr/X11R6 type ffs (rw,
> asynchronous, local, nodev)
> /dev/sd2h (f17019aae84f4ec9.h) on /mnt/usr/local type ffs (rw,
> asynchronous, local, nodev)
> /dev/sd2j (f17019aae84f4ec9.j) on /mnt/usr/obj type ffs (rw, asynchronous,
> local, nodev, nosuid)
> /dev/sd2i (f17019aae84f4ec9.i) on /mnt/usr/src type ffs (rw, asynchronous,
> local, nodev, nosuid)
> /dev/sd2e (f17019aae84f4ec9.e) on /mnt/var type ffs (rw, asynchronous,
> local, nodev, nosuid)
>
> Let's install the sets!
> Location of sets? (cd0 disk http or 'done') [http]
> HTTP proxy URL? (e.g. 'http://proxy:8080', or 'none') [none]
> HTTP Server? (hostname, list#, 'done' or '?') [ftp.OpenBSD.org]
> Server directory? [pub/OpenBSD/6.5/sparc64]
>
> Select sets by entering a set name, a file name pattern or 'all'. De-select
> sets by prepending a '-', e.g.: '-game*'. Selected sets are labelled '[X]'.
> [X] bsd [X] base65.tgz [X] game65.tgz [X] xfont65.tgz
> [X] bsd.mp [X] comp65.tgz [X] xbase65.tgz [X] xserv65.tgz
> [X] bsd.rd [X] man65.tgz [X] xshare65.tgz
> Set name(s)? (or 'abort' or 'done') [done] -game* -x*
> [X] bsd [X] base65.tgz [ ] game65.tgz [ ] xfont65.tgz
> [X] bsd.mp [X] comp65.tgz [ ] xbase65.tgz [ ] xserv65.tgz
> [X] bsd.rd [X] man65.tgz [ ] xshare65.tgz
> Set name(s)? (or 'abort' or 'done') [done]
> Get/Verify SHA256.sig 100% |**************************| 1974 00:00
> Signature Verified
> Get/Verify bsd 100% |**************************| 11005 KB 00:14
> Get/Verify bsd.mp 100% |**************************| 11076 KB 00:14
> Get/Verify bsd.rd 100% |**************************| 2699 KB 00:09
> Get/Verify base65.tgz 100% |**************************| 160 MB 01:41
> Get/Verify comp65.tgz 100% |**************************| 68832 KB 01:39
> Get/Verify man65.tgz 100% |**************************| 7392 KB 00:12
> Installing bsd 100% |**************************| 11005 KB 00:00
> Installing bsd.mp 100% |**************************| 11076 KB 00:00
> Installing bsd.rd 100% |**************************| 2699 KB 00:00
> Installing base65.tgz 100% |**************************| 160 MB 00:15
> Extracting etc.tgz 100% |**************************| 260 KB 00:00
> Installing comp65.tgz 100% |**************************| 68832 KB 00:09
> Installing man65.tgz 100% |**************************| 7392 KB 00:01
> Location of sets? (cd0 disk http or 'done') [done]
> Saving configuration files... done.
> Making all device nodes... done.
> Multiprocessor machine; using bsd.mp instead of bsd.
> Relinking to create unique kernel... done.
>
> CONGRATULATIONS! Your OpenBSD install has been successfully completed!
>
> When you login to your new system the first time, please read your mail
> using the 'mail' command.
>
> Exit to (S)hell, (H)alt or (R)eboot? [halt] R
> syncing disks... done
> rebooting
>
> Resetting ...
>
> Sep 02 13:11:10 GMT 2019 XSCF:I::[02030100] Start reset sequence
> Sep 02 13:11:10 GMT 2019 XSCF:I::[02030200] Reset released...
>
> Sep 02 13:11:13 GMT 2019 PowerOn SelfTest start
> POST:Testing Flash/SRAM
> POST:Testing SC
> POST:Testing XSCF
> POST:Banner
> POST:FATAL check
> POST:Testing Timer1
> POST:Testing Tick
> POST:Testing MMU
> POST:Testing CPU Type
> POST:Testing DTAG
> POST:Memory Probe
> POST:Testing Memory
> POST:Testing Softint
> POST:Testing U2P
> POST:Testing Slave Device
> POST:Testing Master Device
> POST:System Configure
> POST:OBP Start
> screen not found.
> keyboard not found.
> Keyboard not present. Using ttya for input and output.
>
> Fujitsu Siemens PRIMEPOWER250 2x SPARC64 V, No Keyboard
> OpenBoot 3.18.1-1, 16384 MB memory installed
> Ethernet address 0:b:5d:f3:a7:5c, Host ID: 80f2a75c.
> XSCF Version: 4.12.1
>
>
>
> Executing last command: boot
> Boot device: /pci@83,4000/FJSV,ulsa@2,1/disk@0,0 File and args:
> OpenBSD IEEE 1275 Bootblock 1.4
> >> OpenBSD BOOT 1.12
> Can't read disk label.
> Can't open disk label package
> sr0*
> Trying bsd...
> open /pci@83,4000/FJSV,ulsa@2,1/disk@0,0:a/etc/random.seed: Invalid argument
> open /pci@83,4000/FJSV,ulsa@2,1/disk@0,0:a/bsd: Invalid argument
>
> Boot:
