On 1/13/06, Bill Marquette <[EMAIL PROTECTED]> wrote:
> On 1/11/06, Bill Marquette <[EMAIL PROTECTED]> wrote:
> > On 12/9/05, Srebrenko Sehic <[EMAIL PROTECTED]> wrote:
> > The ciss driver works fine (no idea about speeds at this time, more on
> > that in a second).
> > The onboard broadcom nics do show up, but I can't seem to get link on them
> > pci-x connected cards are mia even though the pci-x bus looks like
> > it's configured (I believe on the uniprocessor kernel it didn't
> > configure it, I can recheck that).
> >
> > With no network, it was kind of difficult to get anything on the
> > system for IO tests on the disks, which wasn't a huge deal for me in
> > the first place.
>
> I wanted to followup on the network connectivity issue I mentioned
> with the DL385. I obviously didn't try hard enough. After moving the
> machine to another location and using a crossover cable to connect it
> to another OpenBSD box instead of a switch, I'm seeing link activity
> and can get online with it.
>
> The PCI-X issues are still there, but for those that don't care about
> that, the machine does work with onboard disk and onboard network.
With the 2/12/06 amd64 snapshot all of the PCI busses are now showing
on the HP DL385 G4's. One small issue with the LSI MegaRAID card I
have in one of the slots, but I haven't spent any time looking into it
(ie. it's probably operator error).
ami0 at pci5 dev 8 function 0 "Symbios Logic MegaRAID" rev 0x01: can't
map controller pci space
dmesg from install CD - I'll spend more time doing an install later.
Thanks a ton to the developers that worked on this and made it happen
in time for 3.9!
--Bill
OpenBSD 3.9-beta (RAMDISK_CD) #657: Sun Feb 12 22:17:40 MST 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
real mem = 1073311744 (1048156K)
avail mem = 909639680 (888320K)
using 22937 buffers containing 107540480 bytes (105020K) of memory
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: AMD Opteron(tm) Processor 275, 2205.29 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB
64b/line 16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
pci0 at mainbus0 bus 0: configuration mode 1
ppb0 at pci0 dev 3 function 0 "AMD 8111 PCI-PCI" rev 0x07
pci1 at ppb0 bus 1
ohci0 at pci1 dev 0 function 0 "AMD 8111 USB" rev 0x0b: irq 7, version
1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: AMD OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1 at pci1 dev 0 function 1 "AMD 8111 USB" rev 0x0b: irq 7, version
1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: AMD OHCI root hub, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
"Compaq iLO" rev 0x01 at pci1 dev 2 function 0 not configured
"Compaq iLO" rev 0x01 at pci1 dev 2 function 2 not configured
vga1 at pci1 dev 3 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
"AMD AMD8111 LPC" rev 0x05 at pci0 dev 4 function 0 not configured
pciide0 at pci0 dev 4 function 1 "AMD 8111 IDE" rev 0x03: DMA, channel
0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TEAC, CD-224E, 9.9A> SCSI0 5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, DMA mode 2
pciide0: channel 1 ignored (disabled)
"AMD 8111 Power" rev 0x05 at pci0 dev 4 function 3 not configured
ppb1 at pci0 dev 7 function 0 "AMD 8131 PCIX" rev 0x12
pci2 at ppb1 bus 2
ciss0 at pci2 dev 4 function 0 "Compaq Smart Array 64xx" rev 0x01: irq 7
ciss0: 1 LD, HW rev 1, FW 2.58/2.58
scsibus1 at ciss0: 1 targets
sd0 at scsibus1 targ 0 lun 0: <HP, LOGICAL VOLUME, 2.58> SCSI0 0/direct fixed
sd0: 34727MB, 34727 cyl, 64 head, 32 sec, 512 bytes/sec, 71122560 sec total
"AMD 8131 PCIX IOAPIC" rev 0x01 at pci0 dev 7 function 1 not configured
ppb2 at pci0 dev 8 function 0 "AMD 8131 PCIX" rev 0x12
pci3 at ppb2 bus 3
bge0 at pci3 dev 6 function 0 "Broadcom BCM5704C" rev 0x10, BCM5704 B0
(0x2100): irq 7, address 00:15:60:ab:d2:8c
brgphy0 at bge0 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0
bge1 at pci3 dev 6 function 1 "Broadcom BCM5704C" rev 0x10, BCM5704 B0
(0x2100): irq 7, address 00:15:60:ab:d2:8b
brgphy1 at bge1 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0
"AMD 8131 PCIX IOAPIC" rev 0x01 at pci0 dev 8 function 1 not configured
pchb0 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
pci4 at pchb0 bus 4
ppb3 at pci4 dev 9 function 0 "AMD 8131 PCIX" rev 0x12
pci5 at ppb3 bus 5
ppb4 at pci5 dev 7 function 0 "IBM PCIX-PCIX" rev 0x02
pci6 at ppb4 bus 6
em0 at pci6 dev 4 function 0 "Intel PRO/1000MT QP (82546EB)" rev 0x01:
irq 7, address 00:04:23:c6:96:4c
em1 at pci6 dev 4 function 1 "Intel PRO/1000MT QP (82546EB)" rev 0x01:
irq 7, address 00:04:23:c6:96:4d
em2 at pci6 dev 6 function 0 "Intel PRO/1000MT QP (82546EB)" rev 0x01:
irq 7, address 00:04:23:c6:96:4e
em3 at pci6 dev 6 function 1 "Intel PRO/1000MT QP (82546EB)" rev 0x01:
irq 7, address 00:04:23:c6:96:4f
ami0 at pci5 dev 8 function 0 "Symbios Logic MegaRAID" rev 0x01: can't
map controller pci space
"AMD 8131 PCIX IOAPIC" rev 0x01 at pci4 dev 9 function 1 not configured
ppb5 at pci4 dev 10 function 0 "AMD 8131 PCIX" rev 0x12
pci7 at ppb5 bus 7
"AMD 8131 PCIX IOAPIC" rev 0x01 at pci4 dev 10 function 1 not configured
pchb1 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
pchb2 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb3 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
isa0 at mainbus0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
rd0: fixed, 3584 blocks
dkcsum: sd0 matches BIOS drive 0x80
root on rd0a
rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02
umass0 at uhub1 port 1 configuration 1 interface 0
umass0: SanDisk Corporation Cruzer Micro, rev 2.00/0.20, addr 2
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets
sd1 at scsibus2 targ 1 lun 0: <SanDisk, Cruzer Micro, 0.2> SCSI2
0/direct removable
sd1: 244MB, 244 cyl, 64 head, 32 sec, 512 bytes/sec, 501759 sec total
