adding dmesg/hw-sensors...
hth, h.
On Fri, Jul 5, 2019 at 11:16 PM harold felton <hfeltonad...@hfelton.com>
wrote:
> uh - ok, but i had gone into single-user to run/fix some fsck-stuff
> so i had assumed that somehow i mightve borked something...
>
> shutdown: unveil: No such file or directory
>
> is the exact message...
>
> in-case-it-matters i hit RETURN for default sh ... since i was in
> single-user
> mode i wasnt able to run 'locate' and am basically assuming that i should
> just recreate another sdcard (from cd) to start over... basically, we had
> an
> earthquake here in socal yesterday and power got wonky... also, i use a
> kvm-switch between that-machine and this-one to write the email, so i
> needed
> to go rerun the command-sequence just now...
>
> should i reboot into full-multi-user and grab a dmesg as well ? guess
> so...
>
> brb, h.
>
> On Sat, Jul 6, 2019 at 1:45 PM Otto Moerbeek <o...@drijf.net> wrote:
>
>> On Fri, Jul 05, 2019 at 10:39:55PM +0000, harold felton wrote:
>>
>> > howdee,
>> >
>> > just need a confirmation that there is something wrong
>> > with my system since i dont have a spare running atm...
>> >
>> > > boot -s
>> > # shutdown now
>> >
>> > i get an error message about "unveil" missing ?
>> >
>> > tia, h.
>> >
>> > ps - i would rather reinstall than try to debug but can
>> > provide dmesg if nec. (running 6.5-syspatch of amd64
>> > from usb-sdcard on bare-metal zotac-id89 machine)
>>
>> Why make life harder than needed for people who might want help you?
>> Give the exact error message.
>>
>> -Otto
>>
>
>
> --
> harold at hfelton.com
>
--
harold at hfelton.com
OpenBSD 6.5 (GENERIC.MP) #1: Mon May 27 18:27:59 CEST 2019
r...@syspatch-65-amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 9604997120 (9160MB)
avail mem = 9304276992 (8873MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe96e0 (74 entries)
bios0: vendor American Megatrends Inc. version "4.6.5" date 05/22/2014
bios0: ZOTAC ZBOX-ID88/ID89/ID90
acpi0 at bios0: rev 2
acpi0: sleep states S0 S1 S3 S4 S5
acpi0: tables DSDT FACP APIC FPDT MCFG MSDM HPET SSDT SSDT SSDT BGRT
acpi0: wakeup devices P0P1(S4) USB1(S3) USB2(S3) USB3(S3) USB4(S3) USB5(S3)
USB6(S3) USB7(S3) PXSX(S4) RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) RP03(S4)
PXSX(S4) RP04(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i3-3220T CPU @ 2.80GHz, 2794.08 MHz, 06-3a-09
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,DEADLINE,XSAVE,AVX,F16C,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Core(TM) i3-3220T CPU @ 2.80GHz, 2793.65 MHz, 06-3a-09
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,DEADLINE,XSAVE,AVX,F16C,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0
acpimcfg0: addr 0xf8000000, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (P0P1)
acpiprt2 at acpi0: bus 2 (RP01)
acpiprt3 at acpi0: bus 3 (RP02)
acpiprt4 at acpi0: bus 4 (RP03)
acpiprt5 at acpi0: bus -1 (RP04)
acpiprt6 at acpi0: bus 5 (RP05)
acpiprt7 at acpi0: bus -1 (RP06)
acpiprt8 at acpi0: bus -1 (RP07)
acpiprt9 at acpi0: bus -1 (RP08)
acpiprt10 at acpi0: bus 1 (PEG0)
acpiprt11 at acpi0: bus -1 (PEG1)
acpiprt12 at acpi0: bus -1 (PEG2)
acpiprt13 at acpi0: bus -1 (PEG3)
acpiec0 at acpi0: not present
acpicpu0 at acpi0: C3(350@80 mwait.1@0x20), C2(500@59 mwait.1@0x10), C1(1000@1
mwait.1), PSS
acpicpu1 at acpi0: C3(350@80 mwait.1@0x20), C2(500@59 mwait.1@0x10), C1(1000@1
mwait.1), PSS
acpipwrres0 at acpi0: FN00, resource for FAN0
acpipwrres1 at acpi0: FN01, resource for FAN1
acpipwrres2 at acpi0: FN02, resource for FAN2
acpipwrres3 at acpi0: FN03, resource for FAN3
acpipwrres4 at acpi0: FN04, resource for FAN4
acpitz0 at acpi0: critical temperature is 92 degC
acpitz1 at acpi0: critical temperature is 92 degC
acpipci0 at acpi0 PCI0: 0x00000010 0x00000011 0x00000000
acpicmos0 at acpi0
acpibtn0 at acpi0: PWRB
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD01
acpivout at acpivideo0 not configured
acpivout at acpivideo0 not configured
acpivout at acpivideo0 not configured
acpivout at acpivideo0 not configured
acpivout at acpivideo0 not configured
acpivout at acpivideo0 not configured
acpivout at acpivideo0 not configured
cpu0: using VERW MDS workaround
cpu0: Enhanced SpeedStep 2794 MHz: speeds: 2800, 2700, 2600, 2500, 2400, 2300,
2200, 2100, 2000, 1900, 1800, 1700, 1600 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 3G Host" rev 0x09
ppb0 at pci0 dev 1 function 0 "Intel Core 3G PCIE" rev 0x09: msi
pci1 at ppb0 bus 1
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 2500" rev 0x09
drm0 at inteldrm0
inteldrm0: msi
inteldrm0: 1280x1024, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel 6 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
ehci0 at pci0 dev 26 function 0 "Intel 6 Series USB" rev 0x05: apic 2 int 16
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
addr 1
azalia0 at pci0 dev 27 function 0 "Intel 6 Series HD Audio" rev 0x05: msi
azalia0: codecs: Realtek/0x0892, Intel/0x2805, using Realtek/0x0892
audio0 at azalia0
ppb1 at pci0 dev 28 function 0 "Intel 6 Series PCIE" rev 0xb5: msi
pci2 at ppb1 bus 2
iwm0 at pci2 dev 0 function 0 "Intel Dual Band Wireless AC 3160" rev 0x83, msi
ppb2 at pci0 dev 28 function 1 "Intel 6 Series PCIE" rev 0xb5: msi
pci3 at ppb2 bus 3
re0 at pci3 dev 0 function 0 "Realtek 8168" rev 0x06: RTL8168E/8111E-VL
(0x2c80), msi, address 00:01:2e:58:4a:52
rgephy0 at re0 phy 7: RTL8169S/8110S/8211 PHY, rev. 5
ppb3 at pci0 dev 28 function 2 "Intel 6 Series PCIE" rev 0xb5: msi
pci4 at ppb3 bus 4
re1 at pci4 dev 0 function 0 "Realtek 8168" rev 0x06: RTL8168E/8111E-VL
(0x2c80), msi, address 00:01:2e:58:4a:53
rgephy1 at re1 phy 7: RTL8169S/8110S/8211 PHY, rev. 5
ppb4 at pci0 dev 28 function 4 "Intel 6 Series PCIE" rev 0xb5: msi
pci5 at ppb4 bus 5
xhci0 at pci5 dev 0 function 0 "Renesas uPD720202 xHCI" rev 0x02: msi, xHCI 1.0
usb1 at xhci0: USB revision 3.0
uhub1 at usb1 configuration 1 interface 0 "Renesas xHCI root hub" rev 3.00/1.00
addr 1
ehci1 at pci0 dev 29 function 0 "Intel 6 Series USB" rev 0x05: apic 2 int 23
usb2 at ehci1: USB revision 2.0
uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
addr 1
pcib0 at pci0 dev 31 function 0 "Intel H61 LPC" rev 0x05
ahci0 at pci0 dev 31 function 2 "Intel 6 Series AHCI" rev 0x05: msi, AHCI 1.3
scsibus1 at ahci0: 32 targets
ichiic0 at pci0 dev 31 function 3 "Intel 6 Series SMBus" rev 0x05: apic 2 int 18
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-10600 SO-DIMM
spdmem1 at iic0 addr 0x51: 8GB DDR3 SDRAM PC3-12800 SO-DIMM
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
wbsio0 at isa0 port 0x2e/2: NCT6776F rev 0x33
lm1 at wbsio0 port 0xa30/8: NCT6776F
vmm0 at mainbus0: VMX/EPT
error: [drm:pid0:cpt_set_fifo_underrun_reporting] *ERROR* uncleared pch fifo
underrun on pch transcoder A
error: [drm:pid0:intel_pch_fifo_underrun_irq_handler] *ERROR* PCH transcoder A
FIFO underrun
uhub3 at uhub0 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev
2.00/0.00 addr 2
ugen0 at uhub3 port 3 "Intel product 0x07dc" rev 2.00/0.01 addr 3
umass0 at uhub1 port 3 configuration 1 interface 0 "vendor 0x1908 product
0x0226" rev 2.00/1.11 addr 2
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd0 at scsibus2 targ 1 lun 0: <Generic, Mass-Storage, 1.11> SCSI2 0/direct
removable
sd0: 121942MB, 512 bytes/sector, 249737216 sectors
uhub4 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev
2.00/0.00 addr 2
ugen1 at uhub4 port 1 "Generic USB2.0-CRW" rev 2.00/39.60 addr 3
uhidev0 at uhub4 port 2 configuration 1 interface 0 "Dell Dell USB Entry
Keyboard" rev 1.10/1.15 addr 4
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub4 port 5 configuration 1 interface 0 "Logitech USB Optical
Mouse" rev 2.00/72.00 addr 5
uhidev1: iclass 3/1
ums0 at uhidev1: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
root on sd0a (52e11e67636962bc.a) swap on sd0b dump on sd0b
iwm0: hw rev 0x160, fw ver 16.242414.0, address a0:88:69:5e:61:81
wsmouse0 detached
ums0 detached
uhidev1 detached
uhidev1 at uhub4 port 5 configuration 1 interface 0 "Logitech USB Optical
Mouse" rev 2.00/72.00 addr 5
uhidev1: iclass 3/1
ums0 at uhidev1: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
wsmouse0 detached
ums0 detached
uhidev1 detached
uhidev1 at uhub4 port 5 configuration 1 interface 0 "Logitech USB Optical
Mouse" rev 2.00/72.00 addr 5
uhidev1: iclass 3/1
ums0 at uhidev1: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
wsmouse0 detached
ums0 detached
uhidev1 detached
uhidev1 at uhub4 port 5 configuration 1 interface 0 "Logitech USB Optical
Mouse" rev 2.00/72.00 addr 5
uhidev1: iclass 3/1
ums0 at uhidev1: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
hw.sensors.cpu0.temp0=38.00 degC
hw.sensors.acpitz0.temp0=27.80 degC (zone temperature)
hw.sensors.acpitz1.temp0=29.80 degC (zone temperature)
hw.sensors.lm1.temp0=61.00 degC
hw.sensors.lm1.temp1=123.50 degC
hw.sensors.lm1.temp2=41.00 degC
hw.sensors.lm1.fan0=164 RPM
hw.sensors.lm1.fan1=827 RPM
hw.sensors.lm1.fan2=164 RPM
hw.sensors.lm1.fan3=164 RPM
hw.sensors.lm1.fan4=164 RPM
hw.sensors.lm1.volt0=0.79 VDC (VCore)
hw.sensors.lm1.volt1=10.61 VDC (+12V)
hw.sensors.lm1.volt2=3.39 VDC (+3.3V)
hw.sensors.lm1.volt3=3.38 VDC (+3.3V)
hw.sensors.lm1.volt4=-20.41 VDC (-12V)
hw.sensors.lm1.volt5=0.00 VDC
hw.sensors.lm1.volt6=0.60 VDC
hw.sensors.lm1.volt7=3.30 VDC (3.3VSB)
hw.sensors.lm1.volt8=1.66 VDC (VBAT)
