On 7/4/19, Claudio Jeker <cje...@diehard.n-r-g.com> wrote: > On Thu, Jul 04, 2019 at 12:52:15PM +0300, Kihaguru Gathura wrote: >> Hereby attached the new multiprocessor kernel with umsm working ok. >> >> The error message appears for each connection made to cuaU. This might >> potentially populate dmesg logs over time. >> >> Error message: >> umsm0: this device is not using CDC notify message in intr pipe. >> Please send your dmesg to <b...@openbsd.org>, thanks. >> umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0: > > Can you try this USB device on a different OpenBSD machine (e.g. an amd64 > one). I wonder if this is the device just sending a bad message along the > way. The first byte should be 0xa1 (UCDC_NOTIFICATION) and not 0xc1.
The device works well without errors on OpenBSD 6.4 amd64 (IBM Thinkpad T60) and OpenBSD 6.5 arm64 ( Raspberry Pi 3 Model B V1.2) The device detaches and has error (umsm2: this device is not using CDC notify message in intr pipe.) on OpenBSD 6.5 amd64 (HP dc5750 MT) of which i already sent email to b...@openbsd.org. Thanks. >> Kihaguru. >> >> www# dmesg >> console is /pci@83,4000/isa@7/su@0,3f8 >> Copyright (c) 1982, 1986, 1989, 1991, 1993 >> The Regents of the University of California. All rights >> reserved. >> Copyright (c) 1995-2019 OpenBSD. All rights reserved. >> https://www.OpenBSD.org >> >> OpenBSD 6.5 (WWW.MP) #0: Thu Jul 4 08:43:43 EAT 2019 >> kihag...@www.datastore.ke:/usr/src/sys/arch/sparc64/compile/WWW.MP >> real mem = 17179869184 (16384MB) >> avail mem = 16862576640 (16081MB) >> mpath0 at root >> scsibus0 at mpath0: 256 targets >> mainbus0 at root: Fujitsu Siemens PRIMEPOWER250 2x SPARC64 V >> cpu0 at mainbus0: FJSV,SPARC64-V (rev 5.1) @ 1979 MHz >> cpu0: physical 128K instruction (64 b/l), 128K data (64 b/l), 3072K >> external (64 b/l) >> cpu1 at mainbus0: FJSV,SPARC64-V (rev 5.1) @ 1979 MHz >> cpu1: physical 128K instruction (64 b/l), 128K data (64 b/l), 3072K >> external (64 b/l) >> psycho0 at mainbus0 addr 0xfffb2000: SUNW,psycho, impl 0, version 4, ign >> c0 >> psycho0: bus range 0-0, PCI bus 0 >> psycho0: dvma map fe000000-ffffffff, STC0 enabled >> pci0 at psycho0 >> ebus0 at pci0 dev 1 function 0 "Sun PCIO EBus2" rev 0x01 >> "FJSV,scfc" at ebus0 addr 210000-210085, 220000-220031, 260000-260001, >> 270000-28ffff ivec 0x23 not configured >> "FJSV,flashprom" at ebus0 addr 0-3fffff not configured >> clock1 at ebus0 addr 250000-251fff: mk48t59 >> "FJSV,panel" at ebus0 addr 210011-210011 ivec 0x25 not configured >> ebus1 at pci0 dev 7 function 0 "Acer Labs M1533 ISA" rev 0x00 >> com0 at ebus1 addr 3f8-3ff ivec 0x2b: ns16550a, 16 byte fifo >> com0: console >> com1 at ebus1 addr 2e8-2ef ivec 0x2b: ns16550a, 16 byte fifo >> hme0 at pci0 dev 1 function 1 "Sun HME" rev 0x01: ivec 0xe1, address >> 00:0b:5d:f3:a7:5c >> nsphyter0 at hme0 phy 1: DP83843 10/100 PHY, rev. 0 >> mpi0 at pci0 dev 2 function 1 "Symbios Logic 53c1030" rev 0x07: ivec 0xe0 >> mpi0: 0, firmware 1.0.12.0 >> scsibus1 at mpi0: 16 targets, initiator 7 >> sym0 at scsibus1 targ 0 lun 0: <FUJITSU, MAT3073N SUN72G, 0602> SCSI2 >> 0/direct fixed serial.FUJITSU_MAT3073N_SUN72G_000506B00RAR_AAN0P5200RAR >> sd0 at scsibus0 targ 0 lun 0: <FUJITSU, MAT3073N SUN72G, 0602> SCSI2 >> 0/direct fixed serial.FUJITSU_MAT3073N_SUN72G_000506B00RAR_AAN0P5200RAR >> sd0: 70007MB, 512 bytes/sector, 143374738 sectors >> sym1 at scsibus1 targ 1 lun 0: <FUJITSU, MAT3073N SUN72G, 0602> SCSI2 >> 0/direct fixed serial.FUJITSU_MAT3073N_SUN72G_000506B00SSL_AAN0P5200SSL >> sd1 at scsibus0 targ 1 lun 0: <FUJITSU, MAT3073N SUN72G, 0602> SCSI2 >> 0/direct fixed serial.FUJITSU_MAT3073N_SUN72G_000506B00SSL_AAN0P5200SSL >> sd1: 70007MB, 512 bytes/sector, 143374738 sectors >> mpi0: target 0 Sync at 160MHz width 16bit offset 127 QAS 1 DT 1 IU 1 >> mpi0: target 1 Sync at 160MHz width 16bit offset 127 QAS 1 DT 1 IU 1 >> pciide0 at pci0 dev 13 function 0 "Acer Labs M5229 UDMA IDE" rev 0xc4: >> DMA, channel 0 configured to native-PCI, channel 1 configured to >> native-PCI >> pciide0: using ivec 0xe4 for native-PCI interrupt >> atapiscsi0 at pciide0 channel 0 drive 0 >> scsibus2 at atapiscsi0: 2 targets >> cd0 at scsibus2 targ 0 lun 0: <MATSHITA, DVD-ROM SR-8178, PY28> ATAPI >> 5/cdrom removable >> cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 >> pciide0: channel 1 disabled (no drives) >> ohci0 at pci0 dev 10 function 0 "Acer Labs M5237 USB" rev 0x03: ivec >> 0xe9, version 1.0, legacy support >> usb0 at ohci0: USB revision 1.0 >> uhub0 at usb0 configuration 1 interface 0 "Acer Labs OHCI root hub" >> rev 1.00/1.00 addr 1 >> psycho1 at mainbus0 addr 0xfff9e000: SUNW,psycho, impl 0, version 4, ign >> c0 >> psycho1: bus range 128-128, PCI bus 128 >> psycho1: dvma map fe000000-ffffffff, STC0 enabled, STC1 enabled >> pci1 at psycho1 >> bge0 at pci1 dev 1 function 0 "Fujitsu PRIMEPOWER250/450 LAN" rev >> 0x02, BCM5702/5703 A2 (0x1002): ivec 0xc0, address 00:0b:5d:f4:27:5c >> brgphy0 at bge0 phy 1: BCM5703 10/100/1000baseT PHY, rev. 2 >> "counter-timer" at mainbus0 addr 0xfff8bc00 not configured >> umsm0 at uhub0 port 1 configuration 1 interface 0 "HUAWEI HUAWEI >> Mobile" rev 2.00/1.02 addr 2 >> ucom0 at umsm0 >> umsm1 at uhub0 port 1 configuration 1 interface 1 "HUAWEI HUAWEI >> Mobile" rev 2.00/1.02 addr 2 >> ucom1 at umsm1 >> umsm2 at uhub0 port 1 configuration 1 interface 2 "HUAWEI HUAWEI >> Mobile" rev 2.00/1.02 addr 2 >> ucom2 at umsm2 >> umass0 at uhub0 port 1 configuration 1 interface 3 "HUAWEI HUAWEI >> Mobile" rev 2.00/1.02 addr 2 >> umass0: using SCSI over Bulk-Only >> scsibus3 at umass0: 2 targets, initiator 0 >> cd1 at scsibus3 targ 1 lun 0: <HUAWEI, Mass Storage, 2.31> SCSI2 >> 5/cdrom removable >> umass1 at uhub0 port 1 configuration 1 interface 4 "HUAWEI HUAWEI >> Mobile" rev 2.00/1.02 addr 2 >> umass1: using SCSI over Bulk-Only >> scsibus4 at umass1: 2 targets, initiator 0 >> sd2 at scsibus4 targ 1 lun 0: <HUAWEI, SD Storage, 2.31> SCSI2 >> 0/direct removable >> vscsi0 at root >> scsibus5 at vscsi0: 256 targets >> softraid0 at root >> scsibus6bootpath: /pci@83,4000/FJSV,ulsa@2,1/disk@0,0 >> root on sd0a (e489192361503865.a) swap on sd0b dump on sd0b >> umsm0: this device is not using CDC notify message in intr pipe. >> Please send your dmesg to <b...@openbsd.org>, thanks. >> umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0 >> www# >> >> >> >> >> On 7/3/19, Kihaguru Gathura <pqscr...@gmail.com> wrote: >> >> Try adding umsm to /sys/arch/sparc64/conf/GENERIC and build a new >> >> kernel. >> >> If it works ok, report back, maybe we can add it to the standard >> >> kernel. >> > >> > Have added umsm to GENERIC and built a new kernel => modem works as >> > desired at cuaU0 -s 115200. >> > >> > Next will build a multiprocessor kernel using GENERIC.MP and continue >> > testing and using the modem. >> > >> > However error messages noted at dmesg (umsm0: this device is not using >> > CDC notify message in intr pipe.) >> > >> > Thank you, >> > >> > Kihaguru. >> > >> > +++++++++++++++++++++++++++++++++++++++++++++++++ >> > console is /pci@83,4000/isa@7/su@0,3f8 >> > Copyright (c) 1982, 1986, 1989, 1991, 1993 >> > The Regents of the University of California. All rights >> > reserved. >> > Copyright (c) 1995-2019 OpenBSD. All rights reserved. >> > https://www.OpenBSD.org >> > >> > OpenBSD 6.5 (WWW) #0: Wed Jul 3 13:36:10 EAT 2019 >> > r...@www.datastore.ke:/usr/src/sys/arch/sparc64/compile/WWW >> > real mem = 17179869184 (16384MB) >> > avail mem = 16862699520 (16081MB) >> > mpath0 at root >> > scsibus0 at mpath0: 256 targets >> > mainbus0 at root: Fujitsu Siemens PRIMEPOWER250 2x SPARC64 V >> > cpu0 at mainbus0: FJSV,SPARC64-V (rev 5.1) @ 1979 MHz >> > cpu0: physical 128K instruction (64 b/l), 128K data (64 b/l), 3072K >> > external (64 b/l) >> > "FJSV,SPARC64-V" at mainbus0 not configured >> > psycho0 at mainbus0 addr 0xfffb2000: SUNW,psycho, impl 0, version 4, ign >> > c0 >> > psycho0: bus range 0-0, PCI bus 0 >> > psycho0: dvma map fe000000-ffffffff, STC0 enabled >> > pci0 at psycho0 >> > ebus0 at pci0 dev 1 function 0 "Sun PCIO EBus2" rev 0x01 >> > "FJSV,scfc" at ebus0 addr 210000-210085, 220000-220031, 260000-260001, >> > 270000-28ffff ivec 0x23 not configured >> > "FJSV,flashprom" at ebus0 addr 0-3fffff not configured >> > clock1 at ebus0 addr 250000-251fff: mk48t59 >> > "FJSV,panel" at ebus0 addr 210011-210011 ivec 0x25 not configured >> > ebus1 at pci0 dev 7 function 0 "Acer Labs M1533 ISA" rev 0x00 >> > com0 at ebus1 addr 3f8-3ff ivec 0x2b: ns16550a, 16 byte fifo >> > com0: console >> > com1 at ebus1 addr 2e8-2ef ivec 0x2b: ns16550a, 16 byte fifo >> > hme0 at pci0 dev 1 function 1 "Sun HME" rev 0x01: ivec 0xe1, address >> > 00:0b:5d:f3:a7:5c >> > nsphyter0 at hme0 phy 1: DP83843 10/100 PHY, rev. 0 >> > mpi0 at pci0 dev 2 function 1 "Symbios Logic 53c1030" rev 0x07: ivec >> > 0xe0 >> > mpi0: 0, firmware 1.0.12.0 >> > scsibus1 at mpi0: 16 targets, initiator 7 >> > sym0 at scsibus1 targ 0 lun 0: <FUJITSU, MAT3073N SUN72G, 0602> SCSI2 >> > 0/direct fixed serial.FUJITSU_MAT3073N_SUN72G_000506B00RAR_AAN0P5200RAR >> > sd0 at scsibus0 targ 0 lun 0: <FUJITSU, MAT3073N SUN72G, 0602> SCSI2 >> > 0/direct fixed serial.FUJITSU_MAT3073N_SUN72G_000506B00RAR_AAN0P5200RAR >> > sd0: 70007MB, 512 bytes/sector, 143374738 sectors >> > sym1 at scsibus1 targ 1 lun 0: <FUJITSU, MAT3073N SUN72G, 0602> SCSI2 >> > 0/direct fixed serial.FUJITSU_MAT3073N_SUN72G_000506B00SSL_AAN0P5200SSL >> > sd1 at scsibus0 targ 1 lun 0: <FUJITSU, MAT3073N SUN72G, 0602> SCSI2 >> > 0/direct fixed serial.FUJITSU_MAT3073N_SUN72G_000506B00SSL_AAN0P5200SSL >> > sd1: 70007MB, 512 bytes/sector, 143374738 sectors >> > mpi0: target 0 Sync at 160MHz width 16bit offset 127 QAS 1 DT 1 IU 1 >> > mpi0: target 1 Sync at 160MHz width 16bit offset 127 QAS 1 DT 1 IU 1 >> > pciide0 at pci0 dev 13 function 0 "Acer Labs M5229 UDMA IDE" rev 0xc4: >> > DMA, channel 0 configured to native-PCI, channel 1 configured to >> > native-PCI >> > pciide0: using ivec 0xe4 for native-PCI interrupt >> > atapiscsi0 at pciide0 channel 0 drive 0 >> > scsibus2 at atapiscsi0: 2 targets >> > cd0 at scsibus2 targ 0 lun 0: <MATSHITA, DVD-ROM SR-8178, PY28> ATAPI >> > 5/cdrom removable >> > cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 >> > pciide0: channel 1 disabled (no drives) >> > ohci0 at pci0 dev 10 function 0 "Acer Labs M5237 USB" rev 0x03: ivec >> > 0xe9, version 1.0, legacy support >> > usb0 at ohci0: USB revision 1.0 >> > uhub0 at usb0 configuration 1 interface 0 "Acer Labs OHCI root hub" >> > rev 1.00/1.00 addr 1 >> > psycbrgphy0 at bge0 phy 1: BCM5703 10/100/1000baseT PHY, rev. 2 >> > timer0 at mainbus0 addr 0xfff8bc00 ivec 0xec, 0xed >> > umsm0 at uhub0 port 1 configuration 1 interface 0 "HUAWEI HUAWEI >> > Mobile" rev 2.00/1.02 addr 2 >> > ucom0 at umsm0 >> > umsm1 at uhub0 port 1 configuration 1 interface 1 "HUAWEI HUAWEI >> > Mobile" rev 2.00/1.02 addr 2 >> > ucom1 at umsm1 >> > umsm2 at uhub0 port 1 configuration 1 interface 2 "HUAWEI HUAWEI >> > Mobile" rev 2.00/1.02 addr 2 >> > ucom2 at umsm2 >> > umass0 at uhub0 port 1 configuration 1 interface 3 "HUAWEI HUAWEI >> > Mobile" rev 2.00/1.02 addr 2 >> > umass0: using SCSI over Bulk-Only >> > scsibus3 at umass0: 2 targets, initiator 0 >> > cd1 at scsibus3 targ 1 lun 0: <HUAWEI, Mass Storage, 2.31> SCSI2 >> > 5/cdrom removable >> > umass1 at uhub0 port 1 configuration 1 interface 4 "HUAWEI HUAWEI >> > Mobile" rev 2.00/1.02 addr 2 >> > umass1: using SCSI over Bulk-Only >> > scsibus4 at umass1: 2 targets, initiator 0 >> > sd2 at scsibus4 targ 1 lun 0: <HUAWEI, SD Storage, 2.31> SCSI2 >> > 0/direct removable >> > vscsi0 at root >> > scsibus5 at vscsi0: 256 targets >> > softraid0 at root >> > scsibus6 at softraid0: 256 targets >> > bootpath: /pci@83,4000/FJSV,ulsa@2,1/disk@0,0 >> > root on sd0a (e489192361503865.a) swap on sd0b dump on sd0b >> > umsm0: this device is not using CDC notify message in intr pipe. >> > Please send your dmesg to <b...@openbsd.org>, thanks. >> > umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0 >> > umsm0: this device is not using CDC notify message in intr pipe. >> > Please send your dmesg to <b...@openbsd.org>, thanks. >> > umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0 >> > umsm0: this device is not using CDC notify message in intr pipe. >> > Please send your dmesg to <b...@openbsd.org>, thanks. >> > umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0 >> > umsm0: this device is not using CDC notify message in intr pipe. >> > Please send your dmesg to <b...@openbsd.org>, thanks. >> > umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0 >> > umsm0: this device is not using CDC notify message in intr pipe. >> > Please send your dmesg to <b...@openbsd.org>, thanks. >> > umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0 >> > umsm0: this device is not using CDC notify message in intr pipe. >> > Please send your dmesg to <b...@openbsd.org>, thanks. >> > umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0 >> > umsm0: this device is not using CDC notify message in intr pipe. >> > Please send your dmesg to <b...@openbsd.org>, thanks. >> > umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0 >> > umsm0: this device is not using CDC notify message in intr pipe. >> > Please send your dmesg to <b...@openbsd.org>, thanks. >> > umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0 >> > umsm0: this device is not using CDC notify message in intr pipe. >> > Please send your dmesg to <b...@openbsd.org>, thanks. >> > umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0 >> > umsm0: this device is not using CDC notify message in intr pipe. >> > Please send your dmesg to <b...@openbsd.org>, thanks. >> > umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0 >> > umsm0: this device is not using CDC notify message in intr pipe. >> > Please send your dmesg to <b...@openbsd.org>, thanks. >> > umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0 >> > ho1 at mainbus0 addr 0xfff9e000: SUNW,psycho, impl 0, version 4, ign c0 >> > psycho1: bus range 128-128, PCI bus 128 >> > psycho1: dvma map fe000000-ffffffff, STC0 enabled, STC1 enabled >> > pci1 at psycho1 >> > sd2 at scsibus4 targ 1 lun 0: <HUAWEI, SD Storage, 2.31> SCSI2 >> > 0/direct removable >> > vscsi0 at root >> > scsibus5 at vscsi0: 256 targets >> > softraid0 at root >> > scsibus6 at softraid0: 256 targets >> > bootpath: /pci@83,4000/FJSV,ulsa@2,1/disk@0,0 >> > root on sd0a (e489192361503865.a) swap on sd0b dump on sd0b >> > umsm0: this device is not using CDC notify message in intr pipe. >> > Please send your dmesg to <b...@openbsd.org>, thanks. >> > umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0 >> > umsm0: this device is not using CDC notify message in intr pipe. >> > Please send your dmesg to <b...@openbsd.org>, thanks. >> > umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0 >> > umsm0: this device is not using CDC notify message in intr pipe. >> > Please send your dmesg to <b...@openbsd.org>, thanks. >> > umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0 >> > umsm0: this device is not using CDC notify message in intr pipe. >> > Please send your dmesg to <b...@openbsd.org>, thanks. >> > umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0 >> > umsm0: this device is not using CDC notify message in intr pipe. >> > Please send your dmesg to <b...@openbsd.org>, thanks. >> > umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0 >> > umsm0: this device is not using CDC notify message in intr pipe. >> > Please send your dmesg to <b...@openbsd.org>, thanks. >> > umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0 >> > umsm0: this device is not using CDC notify message in intr pipe. >> > Please send your dmesg to <b...@openbsd.org>, thanks. >> > umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0 >> > umsm0: this device is not using CDC notify message in intr pipe. >> > Please send your dmesg to <b...@openbsd.org>, thanks. >> > umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0 >> > umsm0: this device is not using CDC notify message in intr pipe. >> > Please send your dmesg to <b...@openbsd.org>, thanks. >> > umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0 >> > umsm0: this device is not using CDC notify message in intr pipe. >> > Please send your dmesg to <b...@openbsd.org>, thanks. >> > umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0 >> > umsm0: this device is not using CDC notify message in intr pipe. >> > Please send your dmesg to <b...@openbsd.org>, thanks. >> > umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0 >> > umsm0: this device is not using CDC notify message in intr pipe. >> > Please send your dmesg to <b...@openbsd.org>, thanks. >> > umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0 >> > umsm0: this device is not using CDC notify message in intr pipe. >> > Please send your dmesg to <b...@openbsd.org>, thanks. >> > umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0 >> > umsm0: this device is not using CDC notify message in intr pipe. >> > Please send your dmesg to <b...@openbsd.org>, thanks. >> > umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0 >> > umsm0: this device is not using CDC notify message in intr pipe. >> > Please send your dmesg to <b...@openbsd.org>, thanks. >> > umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0 >> > umsm0: this device is not using CDC notify message in intr pipe. >> > Please send your dmesg to <b...@openbsd.org>, thanks. >> > umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0 >> > >> > > -- > :wq Claudio > >
