Looks like new ftp is not quite a drop-in replacement for the old one. My
install script[1] that worked for in May 12 snapshot is broken in May 15.
Most likely it's because of file:// url, but I haven't root-caused it.
[1]
https://github.com/google/syzkaller/blob/master/tools/create-openbsd-gce-ci.sh
The relevant section is:
Setting OpenBSD MBR partition to whole sd0...done.
URL to autopartitioning template for disklabel? [none]
file://disklabel.template
Fetching file://disklabel.template
ftp: child terminated: signal 11
No autopartitioning template found.
failed; check /tmp/ai/ai.log
Full transcript below.
% ~/s/syzkaller/tools/create-openbsd-gce-ci.sh
install.site
etc/installurl
etc/rc.conf.local
etc/rc.local
etc/sysctl.conf
1+0 records in
1+0 records out
4096 bytes (4.1 kB, 4.0 KiB) copied, 0.000326984 s, 12.5 MB/s
Executing 'genisoimage -C 16,207104 -M /dev/fd/3 -l -R -graft-points
/6.5/amd64/site65.tgz=site65.tgz /auto_install.conf=auto_install.conf
/disklabel.template=disklabel.template /etc/boot.conf=boot.conf
/etc/random.seed=random.seed | builtin_dd of=install65-amd64-patched.iso
obs=32k seek=12944'
I: -input-charset not specified, using utf-8 (detected in locale settings)
Rock Ridge signatures found
Total translation table size: 0
Total rockridge attributes bytes: 2521
Total directory bytes: 8192
Path table size(bytes): 48
Max brk space used 0
207289 extents written (404 MB)
builtin_dd: 192*2KB out @ average infx1352KBps
install65-amd64-patched.iso: copying volume descriptor(s)
Formatting 'disk.raw', fmt=raw size=10737418240
spawn qemu-system-x86_64 -nographic -smp 2 -drive
if=virtio,file=disk.raw,format=raw -cdrom install65-amd64-patched.iso -net
nic,model=virtio -net user -boot once=d -m 4000 -enable-kvm
>> OpenBSD/amd64 CDBOOT 3.43
boot>
booting cd0a:/6.5/amd64/bsd.rd: 3707729+1532928+3893112+0+598016
[372407+128+451320+300418]=0xa5cbb8
entry point at 0xffffffff81001000
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2019 OpenBSD. All rights reserved.
https://www.OpenBSD.org
OpenBSD 6.5-current (RAMDISK_CD) #22: Wed May 15 10:09:19 MDT 2019
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
real mem = 4177387520 (3983MB)
avail mem = 4046807040 (3859MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.8 @ 0xf68a0 (11 entries)
bios0: vendor SeaBIOS version "1.10.2-1" date 04/01/2014
bios0: QEMU Standard PC (i440FX + PIIX, 1996)
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP APIC HPET
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: QEMU Virtual CPU version 2.5+, 2594.33 MHz, 06-06-03
cpu0:
FPU,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3,CX16,x2APIC,HV,NXE,LONG,LAHF,MELTDOWN
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB
64b/line 16-way L2 cache
cpu0: ITLB 255 4KB entries direct-mapped, 255 4MB entries direct-mapped
cpu0: DTLB 255 4KB entries direct-mapped, 255 4MB entries direct-mapped
cpu0: apic clock running at 1000MHz
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 11, 24 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpicpu at acpi0 not configured
"ACPI0006" at acpi0 not configured
"PNP0A03" at acpi0 not configured
acpicmos0 at acpi0
"PNP0A06" at acpi0 not configured
"PNP0A06" at acpi0 not configured
"PNP0A06" at acpi0 not configured
"QEMU0002" at acpi0 not configured
"ACPI0010" at acpi0 not configured
pvbus0 at mainbus0: KVM
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel 82441FX" rev 0x02
"Intel 82371SB ISA" rev 0x00 at pci0 dev 1 function 0 not configured
pciide0 at pci0 dev 1 function 1 "Intel 82371SB IDE" rev 0x00: DMA, channel
0 wired to compatibility, channel 1 wired to compatibility
pciide0: channel 0 disabled (no drives)
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <QEMU, QEMU DVD-ROM, 2.5+> ATAPI 5/cdrom
removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
"Intel 82371AB Power" rev 0x03 at pci0 dev 1 function 3 not configured
vga1 at pci0 dev 2 function 0 "Bochs VGA" rev 0x02
vga1: aperture needed
wsdisplay1 at vga1 mux 1: console (80x25, vt100 emulation)
virtio0 at pci0 dev 3 function 0 "Qumranet Virtio Network" rev 0x00
vio0 at virtio0: address 52:54:00:12:34:56
virtio0: msix shared
virtio1 at pci0 dev 4 function 0 "Qumranet Virtio Storage" rev 0x00
vioblk0 at virtio1
scsibus1 at vioblk0: 2 targets
sd0 at scsibus1 targ 0 lun 0: <VirtIO, Block Device, > SCSI3 0/direct fixed
sd0: 10240MB, 512 bytes/sector, 20971520 sectors
virtio1: msix shared
isa0 at mainbus0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay1
softraid0 at root
scsibus2 at softraid0: 256 targets
root on rd0a swap on rd0b dump on rd0b
erase ^?, werase ^W, kill ^U, intr ^C, status ^T
Welcome to the OpenBSD/amd64 6.5 installation program.
(I)nstall, (U)pgrade, (A)utoinstall or (S)hell? s
# mount /dev/cd0c /mnt
# cp /mnt/auto_install.conf /mnt/disklabel.template /
# chmod a+r /disklabel.template
# umount /mnt
# exit
erase ^?, werase ^W, kill ^U, intr ^C, status ^T
Welcome to the OpenBSD/amd64 6.5 installation program.
Starting non-interactive mode in 5 seconds...
(I)nstall, (U)pgrade, (A)utoinstall or (S)hell?
Performing non-interactive install...
Terminal type? [vt220] vt220
System hostname? (short form, e.g. 'foo') ci-openbsd
Available network interfaces are: vio0 vlan0.
Which network interface do you wish to configure? (or 'done') [vio0] vio0
IPv4 address for vio0? (or 'dhcp' or 'none') [dhcp] dhcp
IPv6 address for vio0? (or 'autoconf' or 'none') [none] none
Available network interfaces are: vio0 vlan0.
Which network interface do you wish to configure? (or 'done') [done] done
DNS domain name? (e.g. 'example.com') [my.domain] syzkaller
Using DNS nameservers at 10.0.2.3
Password for root account? <provided>
Public ssh key for root account? [none] ecdsa-sha2-nistp256
AAAAE2VjZHNhLXNoYTItbmlzdHAyNTYAAAAIbmlzdHAyNTYAAABBBJeLpmSq+Dgrk01Ht+QtY0GDsY2gcwhT12SqizmacAF67TCa0n8OcpjVOpiiurb01Aa5lcl2WbakUFYmsp1U1l8=
Start sshd(8) by default? [yes] yes
Do you expect to run the X Window System? [yes] no
Change the default console to com0? [yes] yes
Available speeds are: 9600 19200 38400 57600 115200.
Which speed should com0 use? (or 'done') [9600] 115200
Setup a user? (enter a lower-case loginname, or 'no') [no] syzkaller
Full name for user syzkaller? [syzkaller] Syz Kaller
Password for user syzkaller? <provided>
Public ssh key for user syzkaller [none] ecdsa-sha2-nistp256
AAAAE2VjZHNhLXNoYTItbmlzdHAyNTYAAAAIbmlzdHAyNTYAAABBBJeLpmSq+Dgrk01Ht+QtY0GDsY2gcwhT12SqizmacAF67TCa0n8OcpjVOpiiurb01Aa5lcl2WbakUFYmsp1U1l8=
WARNING: root is targeted by password guessing attacks, pubkeys are safer.
Allow root ssh login? (yes, no, prohibit-password) [no] prohibit-password
What timezone are you in? ('?' for list) [US/Pacific] US/Pacific
Available disks are: sd0.
Which disk is the root disk? ('?' for details) [sd0] sd0
No valid MBR or GPT.
Use (W)hole disk MBR, whole disk (G)PT or (E)dit? [whole] whole
Setting OpenBSD MBR partition to whole sd0...done.
URL to autopartitioning template for disklabel? [none]
file://disklabel.template
Fetching file://disklabel.template
ftp: child terminated: signal 11
No autopartitioning template found.
failed; check /tmp/ai/ai.log
(I)nstall, (U)pgrade, (A)utoinstall or (S)hell?
--
nest.cx is Gmail hosted, use PGP:
https://pgp.key-server.io/0x0B1542BD8DF5A1B0
Fingerprint: 5E2B 2D0E 1E03 2046 BEC3 4D50 0B15 42BD 8DF5 A1B0
