Thank you. I attempted creating that file in a similar fashion but it did not change the behavior of the touchpad. However I do appreciate the config file snippet. I have a X260 laying around myself so this would be useful.
‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐ On Sunday, March 31, 2019 8:40 AM, Joel Carnat <j...@carnat.net> wrote: > Hi, > > On Sun 31/03 03:56, Brogan wrote: > > > Hello, > > I recently installed OpenBSD 6.4 on a Dell Latitude 6430u and am trying to > > get touchpad two-finger scrolling working in X11. As far as I can tell the > > touchpad is being loaded via wsmouse but I'm not sure how or where to > > properly configure the WSMOUSECFG_TWOFINGERSCROLL found in > > /usr/include/dev/wscons/wsconsio.h. > > It does not appear that I have a base xorg.conf file. At least not in the > > usual places /etc/ or /etc/X11/. I'm guessing I need to establish that but > > I'm not sure how to get started. > > If there's any config file or machine log output I can provide to assist > > with helping me let me know. > > Thank you. > > On my ThinkPad X260, I had to add an extra configuration file: > > cat /etc/X11/xorg.conf.d/synaptics.conf > > ======================================== > > ThinkPad X260 ships with Synaptics clickpad > > ============================================ > > Section "InputClass" > Identifier "touchpad" > Driver "synaptics" > MatchIsTouchpad "on" > > Option "Device" "/dev/wsmouse0" > #Option "Device" "wsmouse" > Option "Protocol" "auto-dev" > Option "ClickPad" "true" > Option "VertTwoFingerScroll" "true" > Option "HorizTwoFingerScroll" "true" > Option "TapButton1" "1" # Left button > Option "TapButton2" "3" # Right button > Option "PalmDetect" "true" > EndSection > > #EOF > > Hope it helps.
