On 2019-02-13, Mihai Popescu <mih...@gmail.com> wrote:
> Hello,
>
> Did anyone managed to run fine X.org on the integrated video Intel HD
> P4600 from Intel Xeon E3-1245 v3 or another Intel Xeon E3 with the
> same integrated video.
>
> Models with P do not appear in man intel and am not sure if they are
> supported by this driver or something else. (dmesg will be nice).
>
> Thank you.
>
>

I have a machine with P4600, it mostly works ok.

I'm using the intel driver because I kept getting weird behaviour with
context menus appearing on the wrong display with inteldrm, not sure
quite what's up there but obviously something different in how multiple
monitors are handled.

I have problems with video playback from some programs but I'm not too
bothered (USB is xhci so uaudio doesn't work [and these days disabling
xhci breaks the usb keyboard too] so I mostly just use my phone for that.)
It's possible that this works with inteldrm, I haven't tried it recently.

I used to have a bunch of "freezes" where nothing responded for some
minutes at a time, which seems to have gone away after setting sysctl
kern.timecounter.hardware=acpihpet0 (default on this machine is tsc).
It's been like that for a while and again I haven't tried changing
that recently to see whether it's still needed.


OpenBSD 6.4-current (GENERIC.MP) #708: Wed Feb 13 00:34:56 MST 2019
    dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 17067200512 (16276MB)
avail mem = 16540246016 (15774MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xec400 (92 entries)
bios0: vendor Dell Inc. version "A12" date 05/11/2017
bios0: Dell Inc. PowerEdge T20
acpi0 at bios0: rev 2
acpi0: sleep states S0 S4 S5
acpi0: tables DSDT FACP APIC FPDT SLIC LPIT SSDT SSDT SSDT HPET SSDT MCFG SSDT 
ASF! DMAR
acpi0: wakeup devices UAR1(S4) PXSX(S4) RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) 
PXSX(S4) RP05(S4) PXSX(S4) PXSX(S4) PXSX(S4) GLAN(S4) EHC1(S3) EHC2(S3) 
XHC_(S4) HDEF(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Xeon(R) CPU E3-1225 v3 @ 3.20GHz, 3392.58 MHz, 06-3c-03
cpu0: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Xeon(R) CPU E3-1225 v3 @ 3.20GHz, 3392.15 MHz, 06-3c-03
cpu1: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Xeon(R) CPU E3-1225 v3 @ 3.20GHz, 3392.15 MHz, 06-3c-03
cpu2: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Xeon(R) CPU E3-1225 v3 @ 3.20GHz, 3392.15 MHz, 06-3c-03
cpu3: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 0, core 3, package 0
ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins
acpihpet0 at acpi0: 14318179 Hz
acpimcfg0 at acpi0
acpimcfg0: addr 0xf8000000, bus 0-63
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (RP01)
acpiprt2 at acpi0: bus 2 (RP02)
acpiprt3 at acpi0: bus 4 (RP05)
acpiprt4 at acpi0: bus -1 (PEG0)
acpiprt5 at acpi0: bus -1 (PEG1)
acpiprt6 at acpi0: bus -1 (PEG2)
acpiec0 at acpi0: not present
acpicpu0 at acpi0: C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpitz0 at acpi0: critical temperature is 105 degC
acpitz1 at acpi0: critical temperature is 105 degC
acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
acpicmos0 at acpi0
acpibtn0 at acpi0: PWRB
"PNP0C14" at acpi0 not configured
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD1F
cpu0: Enhanced SpeedStep 3392 MHz: speeds: 3201, 3200, 3000, 2900, 2700, 2500, 
2300, 2200, 2000, 1800, 1700, 1500, 1300, 1100, 1000, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Xeon E3-1200 v3 Host" rev 0x06
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics P4600" rev 0x06
drm0 at inteldrm0
inteldrm0: msi
inteldrm0: 1920x1200, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
xhci0 at pci0 dev 20 function 0 "Intel 8 Series xHCI" rev 0x04: msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 
addr 1
"Intel 8 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
puc0 at pci0 dev 22 function 3 "Intel 8 Series KT" rev 0x04: ports: 16 com
com4 at puc0 port 0 apic 8 int 19: ns16550a, 16 byte fifo
com4: probed fifo depth: 0 bytes
em0 at pci0 dev 25 function 0 "Intel I217-LM" rev 0x04: msi, address 
f8:b1:56:ac:32:76
ehci0 at pci0 dev 26 function 0 "Intel 8 Series USB" rev 0x04: apic 8 int 16
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 
addr 1
azalia0 at pci0 dev 27 function 0 "Intel 8 Series HD Audio" rev 0x04: msi
azalia0: codecs: Realtek/0x0280
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 8 Series PCIE" rev 0xd4
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 1 "Intel 8 Series PCIE" rev 0xd4: msi
pci2 at ppb1 bus 2
ppb2 at pci2 dev 0 function 0 "TI XIO2001 PCIE-PCI" rev 0x00
pci3 at ppb2 bus 3
ppb3 at pci0 dev 28 function 4 "Intel 8 Series PCIE" rev 0xd4: msi
pci4 at ppb3 bus 4
nvme0 at pci4 dev 0 function 0 "Samsung SM961/PM961 NVMe" rev 0x00: msi, NVMe 
1.2
nvme0: SAMSUNG MZVLW256HEHP-000L7, firmware 4L7QCXB7, serial S35ENX0J765205
scsibus1 at nvme0: 1 targets
sd0 at scsibus1 targ 0 lun 0: <NVMe, SAMSUNG MZVLW256, 4L7Q> SCSI4 0/direct 
fixed
sd0: 244198MB, 512 bytes/sector, 500118192 sectors
ehci1 at pci0 dev 29 function 0 "Intel 8 Series USB" rev 0x04: apic 8 int 23
usb2 at ehci1: USB revision 2.0
uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 
addr 1
pcib0 at pci0 dev 31 function 0 "Intel C226 LPC" rev 0x04
ahci0 at pci0 dev 31 function 2 "Intel 8 Series AHCI" rev 0x04: msi, AHCI 1.3
ahci0: port 0: 6.0Gb/s
scsibus2 at ahci0: 32 targets
sd1 at scsibus2 targ 0 lun 0: <ATA, Samsung SSD 850, EMT0> SCSI3 0/direct fixed 
naa.5002538d4086e2f8
sd1: 476940MB, 512 bytes/sector, 976773168 sectors, thin
ichiic0 at pci0 dev 31 function 3 "Intel 8 Series SMBus" rev 0x04: apic 8 int 18
iic0 at ichiic0
sdtemp0 at iic0 addr 0x18: se97
sdtemp1 at iic0 addr 0x19: mcp98243
sdtemp2 at iic0 addr 0x1a: se97
sdtemp3 at iic0 addr 0x1b: mcp98243
spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM ECC PC3-12800 with thermal sensor
spdmem1 at iic0 addr 0x51: 4GB DDR3 SDRAM ECC PC3-12800 with thermal sensor
spdmem2 at iic0 addr 0x52: 4GB DDR3 SDRAM ECC PC3-12800 with thermal sensor
spdmem3 at iic0 addr 0x53: 4GB DDR3 SDRAM ECC PC3-12800 with thermal sensor
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX/EPT
uhidev0 at uhub0 port 9 configuration 1 interface 0 "Lite-On Technology Corp. 
ThinkPad USB Keyboard with TrackPoint" rev 1.10/1.27 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub0 port 9 configuration 1 interface 1 "Lite-On Technology Corp. 
ThinkPad USB Keyboard with TrackPoint" rev 1.10/1.27 addr 2
uhidev1: iclass 3/0, 4 report ids
ums0 at uhidev1 reportid 1: 3 buttons
wsmouse0 at ums0 mux 0
uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 3: input=3, output=1, feature=0
uhid2 at uhidev1 reportid 4: input=0, output=0, feature=4
uhub3 at uhub0 port 10 configuration 1 interface 0 "Genesys Logic USB2.0 Hub" 
rev 2.00/77.64 addr 3
uhub4 at uhub3 port 4 configuration 1 interface 0 "Genesys Logic USB2.0 Hub" 
rev 2.00/77.64 addr 4
uhub5 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 
2.00/0.04 addr 2
uhub6 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 
2.00/0.04 addr 2
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
root on sd1a (55d00535300500ff.a) swap on sd1b dump on sd1b
wskbd1: disconnecting from wsdisplay0
wskbd1 detached
ukbd0 detached
uhidev0 detached
wsmouse0 detached
ums0 detached
uhid0 detached
uhid1 detached
uhid2 detached
uhidev1 detached
arp_rtrequest: bad gateway value: vlan5
uhidev0 at uhub0 port 9 configuration 1 interface 0 "Lite-On Technology Corp. 
ThinkPad USB Keyboard with TrackPoint" rev 1.10/1.27 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0: console keyboard, using wsdisplay0
uhidev1 at uhub0 port 9 configuration 1 interface 1 "Lite-On Technology Corp. 
ThinkPad USB Keyboard with TrackPoint" rev 1.10/1.27 addr 2
uhidev1: iclass 3/0, 4 report ids
ums0 at uhidev1 reportid 1: 3 buttons
wsmouse0 at ums0 mux 0
uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 3: input=3, output=1, feature=0
uhid2 at uhidev1 reportid 4: input=0, output=0, feature=4

$ xrandr                                                                        
             
Screen 0: minimum 8 x 8, current 4480 x 1600, maximum 32767 x 32767
DP1 connected primary 2560x1600+1920+0 (normal left inverted right x axis y 
axis) 641mm x 400mm
   2560x1600     59.97*+
   1280x800      59.91  
DP2 connected 1920x1200+0+0 (normal left inverted right x axis y axis) 518mm x 
324mm
   1920x1200     59.95*+
   1920x1080     60.00    50.00    59.94    30.00    25.00    24.00    29.97    
23.98  
   1920x1080i    60.00    50.00    59.94  
   1600x1200     60.00  
   1280x1024     75.02    60.02  
   1152x864      75.00  
   1280x720      60.00    50.00    59.94  
   1024x768      75.08    60.00  
   800x600       75.00    60.32  
   720x576       50.00  
   720x480       60.00    59.94  
   640x480       75.00    60.00    59.94  
   720x400       70.08  
HDMI1 disconnected (normal left inverted right x axis y axis)
HDMI2 disconnected (normal left inverted right x axis y axis)
VGA1 disconnected (normal left inverted right x axis y axis)
VIRTUAL1 disconnected (normal left inverted right x axis y axis)


Reply via email to