Thus said Daniel Dickman on Fri, 14 Dec 2018 20:45:11 -0500:
> Try previous releases of OpenBSD/amd64 to check if radeondrm ever
> worked for you on amd64.
That was a fruitful suggestion. I tried 6.3 amd64 and it works. So
somewhere after 6.3 a change was introduced that made this particular
Radeon card not work. I'll see if I can discover which. What's the best
way to bisect with CVS; update sources by date/time?
> If you diff the dmesgs is there any other difference besides what's
> already been reported?
I don't believe there were any other significant diffences. At any rate,
below is the diff (hopefully unified strategy is fine) between 6.3 and
6.4 dmesg for amd64, followed by the full dmesg output:
--- dmesg-63.txt Wed Dec 19 08:16:41 2018
+++ dmesg-64.txt Wed Dec 19 08:16:41 2018
@@ -1,7 +1,7 @@
-OpenBSD 6.3 (GENERIC.MP) #107: Sat Mar 24 14:21:59 MDT 2018
- dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
+OpenBSD 6.4 (GENERIC.MP) #2: Tue Dec 18 13:17:16 CET 2018
+
r...@syspatch-64-amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 3739795456 (3566MB)
-avail mem = 3619459072 (3451MB)
+avail mem = 3617239040 (3449MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
@@ -15,7 +15,7 @@
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
-cpu0: Intel(R) Pentium(R) D CPU 3.00GHz, 2992.98 MHz
+cpu0: Intel(R) Pentium(R) D CPU 3.00GHz, 2993.02 MHz, 0f-06-04
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,CNXT-ID,CX16,xTPR,PDCM,NXE,LONG,LAHF,MELTDOWN
cpu0: 2MB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
@@ -23,13 +23,14 @@
cpu0: apic clock running at 199MHz
cpu0: mwait min=64, max=64
cpu1 at mainbus0: apid 1 (application processor)
-cpu1: Intel(R) Pentium(R) D CPU 3.00GHz, 2992.59 MHz
+cpu1: Intel(R) Pentium(R) D CPU 3.00GHz, 2992.58 MHz, 0f-06-04
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,CNXT-ID,CX16,xTPR,PDCM,NXE,LONG,LAHF,MELTDOWN
cpu1: 2MB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
-ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins
-, remapped to apid 8
-acpimcfg0 at acpi0 addr 0xf0000000, bus 0-63
+ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins, remapped
+acpimcfg0 at acpi0
+acpimcfg0: addr 0xf0000000, bus 0-63
+acpimcfg0: addr 0x0, bus 0-0
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 5 (PCI4)
acpiprt1 at acpi0: bus 2 (PCI2)
@@ -41,6 +42,7 @@
acpicpu0 at acpi0: C1(@1 halt!)
acpicpu1 at acpi0: C1(@1 halt!)
acpibtn0 at acpi0: VBTN
+acpicmos0 at acpi0
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel 82945G Host" rev 0x00
ppb0 at pci0 dev 1 function 0 "Intel 82945G PCIE" rev 0x00: msi
@@ -137,8 +139,17 @@
scsibus6 at vscsi0: 256 targets
softraid0 at root
scsibus7 at softraid0: 256 targets
-root on sd0a (0c2217a59fb32e85.a) swap on sd0b dump on sd0b
-radeondrm0: 1680x1050, 32bpp
-wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0
+root on sd5a (f2d5da28e9d59e44.a) swap on sd5b dump on sd5b
+initializing kernel modesetting (RV610 0x1002:0x94C1 0x1028:0x0D02).
+drm:pid0:r600_init *ERROR* Expecting atombios for R600 GPU
+drm:pid0:radeondrm_attachhook *ERROR* Fatal error during GPU init
+[TTM] Memory type 2 has not been initialized
+drm0 detached
+radeondrm0 detached
+vga1 at pci1 dev 0 function 0 "ATI Radeon HD 2400 XT" rev 0x00
+wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation), using wskbd0
wskbd1: connecting to wsdisplay0
-wsdisplay0: screen 1-5 added (std, vt100 emulation)
+wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
+wsmouse0 detached
+ums0 detached
+uhidev2 detached
OpenBSD 6.3 (GENERIC.MP) #107: Sat Mar 24 14:21:59 MDT 2018
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 3739795456 (3566MB)
avail mem = 3619459072 (3451MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.3 @ 0xf0450 (65 entries)
bios0: vendor Dell Inc. version "A04" date 04/19/2006
bios0: Dell Inc. Dell DXP051
acpi0 at bios0: rev 2
acpi0: sleep states S0 S1 S3 S4 S5
acpi0: tables DSDT FACP SSDT APIC BOOT ASF! MCFG HPET
acpi0: wakeup devices VBTN(S4) PCI0(S5) PCI4(S5) PCI2(S5) PCI3(S5) PCI1(S5)
PCI5(S5) PCI6(S5) USB0(S3) USB1(S3) USB2(S3) USB3(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Pentium(R) D CPU 3.00GHz, 2992.98 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,CNXT-ID,CX16,xTPR,PDCM,NXE,LONG,LAHF,MELTDOWN
cpu0: 2MB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 199MHz
cpu0: mwait min=64, max=64
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Pentium(R) D CPU 3.00GHz, 2992.59 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,CNXT-ID,CX16,xTPR,PDCM,NXE,LONG,LAHF,MELTDOWN
cpu1: 2MB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins
, remapped to apid 8
acpimcfg0 at acpi0 addr 0xf0000000, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 5 (PCI4)
acpiprt1 at acpi0: bus 2 (PCI2)
acpiprt2 at acpi0: bus -1 (PCI3)
acpiprt3 at acpi0: bus 1 (PCI1)
acpiprt4 at acpi0: bus 3 (PCI5)
acpiprt5 at acpi0: bus 4 (PCI6)
acpiprt6 at acpi0: bus 0 (PCI0)
acpicpu0 at acpi0: C1(@1 halt!)
acpicpu1 at acpi0: C1(@1 halt!)
acpibtn0 at acpi0: VBTN
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel 82945G Host" rev 0x00
ppb0 at pci0 dev 1 function 0 "Intel 82945G PCIE" rev 0x00: msi
pci1 at ppb0 bus 1
radeondrm0 at pci1 dev 0 function 0 "ATI Radeon HD 2400 XT" rev 0x00
drm0 at radeondrm0
radeondrm0: msi
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x01: msi
azalia0: codecs: Sigmatel STAC9220/1
audio0 at azalia0
ppb1 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01: msi
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 4 "Intel 82801G PCIE" rev 0x01: msi
pci3 at ppb2 bus 3
ppb3 at pci0 dev 28 function 5 "Intel 82801G PCIE" rev 0x01: msi
pci4 at ppb3 bus 4
em0 at pci4 dev 0 function 0 "Intel 82573L" rev 0x01: msi, address
00:13:72:1a:ed:5c
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 8 int 21
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 8 int 22
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 8 int 18
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 8 int 23
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 8 int 21
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
addr 1
ppb4 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xe1
pci5 at ppb4 bus 5
"AT&T/Lucent FW322 1394" rev 0x61 at pci5 dev 5 function 0 not configured
pcib0 at pci0 dev 31 function 0 "Intel 82801GH LPC" rev 0x01
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <SONY, DVD-ROM DDU1615, FDS2> ATAPI 5/cdrom
removable
atapiscsi1 at pciide0 channel 0 drive 1
scsibus2 at atapiscsi1: 2 targets
cd1 at scsibus2 targ 0 lun 0: <PHILIPS, DVD+-RW DVD8801, 4D28> ATAPI 5/cdrom
removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
cd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
ahci0 at pci0 dev 31 function 2 "Intel 82801GR AHCI" rev 0x01: msi, AHCI 1.1
ahci0: port 0: 3.0Gb/s
ahci0: PHY offline on port 1
ahci0: PHY offline on port 2
ahci0: PHY offline on port 3
scsibus3 at ahci0: 32 targets
sd0 at scsibus3 targ 0 lun 0: <ATA, ST3250824AS, 3.AD> SCSI3 0/direct fixed
t10.ATA_ST3250824AS_5ND4HD0K
sd0: 238418MB, 512 bytes/sector, 488281250 sectors
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: apic 8 int 17
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5
spdmem1 at iic0 addr 0x51: 1GB DDR2 SDRAM non-parity PC2-5300CL5
spdmem2 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-5300CL5
spdmem3 at iic0 addr 0x53: 1GB DDR2 SDRAM non-parity PC2-5300CL5
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
umass0 at uhub0 port 3 configuration 1 interface 0 "TEAC CA-200" rev 2.00/4.00
addr 2
umass0: using SCSI over Bulk-Only
scsibus4 at umass0: 2 targets, initiator 0
sd1 at scsibus4 targ 1 lun 0: <TEAC, USB HS-CF Card, 4.00> SCSI0 0/direct
removable
sd2 at scsibus4 targ 1 lun 1: <TEAC, USB HS-xD/SM, 4.00> SCSI0 0/direct
removable
sd3 at scsibus4 targ 1 lun 2: <TEAC, USB HS-MS Card, 4.00> SCSI0 0/direct
removable
sd4 at scsibus4 targ 1 lun 3: <TEAC, USB HS-SD Card, 4.00> SCSI0 0/direct
removable
umass1 at uhub0 port 7 configuration 1 interface 0 "SanDisk Cruzer Dial" rev
2.10/1.00 addr 3
umass1: using SCSI over Bulk-Only
scsibus5 at umass1: 2 targets, initiator 0
sd5 at scsibus5 targ 1 lun 0: <SanDisk, Cruzer Dial, 1.00> SCSI4 0/direct
removable serial.07815599450609104375
sd5: 14944MB, 512 bytes/sector, 30605312 sectors
uhidev0 at uhub2 port 2 configuration 1 interface 0 "Dell Dell KB216 Wired
Keyboard" rev 2.00/33.08 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
uhidev1 at uhub2 port 2 configuration 1 interface 1 "Dell Dell KB216 Wired
Keyboard" rev 2.00/33.08 addr 2
uhidev1: iclass 3/0, 5 report ids
uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=2, output=0, feature=0
uhid2 at uhidev1 reportid 5: input=0, output=0, feature=5
uhidev2 at uhub3 port 1 configuration 1 interface 0 "PixArt Lenovo USB Optical
Mouse" rev 2.00/1.00 addr 2
uhidev2: iclass 3/1
ums0 at uhidev2: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
vscsi0 at root
scsibus6 at vscsi0: 256 targets
softraid0 at root
scsibus7 at softraid0: 256 targets
root on sd0a (0c2217a59fb32e85.a) swap on sd0b dump on sd0b
radeondrm0: 1680x1050, 32bpp
wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0
wskbd1: connecting to wsdisplay0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
OpenBSD 6.4 (GENERIC.MP) #2: Tue Dec 18 13:17:16 CET 2018
r...@syspatch-64-amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 3739795456 (3566MB)
avail mem = 3617239040 (3449MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.3 @ 0xf0450 (65 entries)
bios0: vendor Dell Inc. version "A04" date 04/19/2006
bios0: Dell Inc. Dell DXP051
acpi0 at bios0: rev 2
acpi0: sleep states S0 S1 S3 S4 S5
acpi0: tables DSDT FACP SSDT APIC BOOT ASF! MCFG HPET
acpi0: wakeup devices VBTN(S4) PCI0(S5) PCI4(S5) PCI2(S5) PCI3(S5) PCI1(S5)
PCI5(S5) PCI6(S5) USB0(S3) USB1(S3) USB2(S3) USB3(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Pentium(R) D CPU 3.00GHz, 2993.02 MHz, 0f-06-04
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,CNXT-ID,CX16,xTPR,PDCM,NXE,LONG,LAHF,MELTDOWN
cpu0: 2MB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 199MHz
cpu0: mwait min=64, max=64
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Pentium(R) D CPU 3.00GHz, 2992.58 MHz, 0f-06-04
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,CNXT-ID,CX16,xTPR,PDCM,NXE,LONG,LAHF,MELTDOWN
cpu1: 2MB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins, remapped
acpimcfg0 at acpi0
acpimcfg0: addr 0xf0000000, bus 0-63
acpimcfg0: addr 0x0, bus 0-0
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 5 (PCI4)
acpiprt1 at acpi0: bus 2 (PCI2)
acpiprt2 at acpi0: bus -1 (PCI3)
acpiprt3 at acpi0: bus 1 (PCI1)
acpiprt4 at acpi0: bus 3 (PCI5)
acpiprt5 at acpi0: bus 4 (PCI6)
acpiprt6 at acpi0: bus 0 (PCI0)
acpicpu0 at acpi0: C1(@1 halt!)
acpicpu1 at acpi0: C1(@1 halt!)
acpibtn0 at acpi0: VBTN
acpicmos0 at acpi0
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel 82945G Host" rev 0x00
ppb0 at pci0 dev 1 function 0 "Intel 82945G PCIE" rev 0x00: msi
pci1 at ppb0 bus 1
radeondrm0 at pci1 dev 0 function 0 "ATI Radeon HD 2400 XT" rev 0x00
drm0 at radeondrm0
radeondrm0: msi
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x01: msi
azalia0: codecs: Sigmatel STAC9220/1
audio0 at azalia0
ppb1 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01: msi
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 4 "Intel 82801G PCIE" rev 0x01: msi
pci3 at ppb2 bus 3
ppb3 at pci0 dev 28 function 5 "Intel 82801G PCIE" rev 0x01: msi
pci4 at ppb3 bus 4
em0 at pci4 dev 0 function 0 "Intel 82573L" rev 0x01: msi, address
00:13:72:1a:ed:5c
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 8 int 21
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 8 int 22
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 8 int 18
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 8 int 23
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 8 int 21
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
addr 1
ppb4 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xe1
pci5 at ppb4 bus 5
"AT&T/Lucent FW322 1394" rev 0x61 at pci5 dev 5 function 0 not configured
pcib0 at pci0 dev 31 function 0 "Intel 82801GH LPC" rev 0x01
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <SONY, DVD-ROM DDU1615, FDS2> ATAPI 5/cdrom
removable
atapiscsi1 at pciide0 channel 0 drive 1
scsibus2 at atapiscsi1: 2 targets
cd1 at scsibus2 targ 0 lun 0: <PHILIPS, DVD+-RW DVD8801, 4D28> ATAPI 5/cdrom
removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
cd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
ahci0 at pci0 dev 31 function 2 "Intel 82801GR AHCI" rev 0x01: msi, AHCI 1.1
ahci0: port 0: 3.0Gb/s
ahci0: PHY offline on port 1
ahci0: PHY offline on port 2
ahci0: PHY offline on port 3
scsibus3 at ahci0: 32 targets
sd0 at scsibus3 targ 0 lun 0: <ATA, ST3250824AS, 3.AD> SCSI3 0/direct fixed
t10.ATA_ST3250824AS_5ND4HD0K
sd0: 238418MB, 512 bytes/sector, 488281250 sectors
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: apic 8 int 17
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5
spdmem1 at iic0 addr 0x51: 1GB DDR2 SDRAM non-parity PC2-5300CL5
spdmem2 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-5300CL5
spdmem3 at iic0 addr 0x53: 1GB DDR2 SDRAM non-parity PC2-5300CL5
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
umass0 at uhub0 port 3 configuration 1 interface 0 "TEAC CA-200" rev 2.00/4.00
addr 2
umass0: using SCSI over Bulk-Only
scsibus4 at umass0: 2 targets, initiator 0
sd1 at scsibus4 targ 1 lun 0: <TEAC, USB HS-CF Card, 4.00> SCSI0 0/direct
removable
sd2 at scsibus4 targ 1 lun 1: <TEAC, USB HS-xD/SM, 4.00> SCSI0 0/direct
removable
sd3 at scsibus4 targ 1 lun 2: <TEAC, USB HS-MS Card, 4.00> SCSI0 0/direct
removable
sd4 at scsibus4 targ 1 lun 3: <TEAC, USB HS-SD Card, 4.00> SCSI0 0/direct
removable
umass1 at uhub0 port 7 configuration 1 interface 0 "SanDisk Cruzer Dial" rev
2.10/1.00 addr 3
umass1: using SCSI over Bulk-Only
scsibus5 at umass1: 2 targets, initiator 0
sd5 at scsibus5 targ 1 lun 0: <SanDisk, Cruzer Dial, 1.00> SCSI4 0/direct
removable serial.07815599450609104375
sd5: 14944MB, 512 bytes/sector, 30605312 sectors
uhidev0 at uhub2 port 2 configuration 1 interface 0 "Dell Dell KB216 Wired
Keyboard" rev 2.00/33.08 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
uhidev1 at uhub2 port 2 configuration 1 interface 1 "Dell Dell KB216 Wired
Keyboard" rev 2.00/33.08 addr 2
uhidev1: iclass 3/0, 5 report ids
uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=2, output=0, feature=0
uhid2 at uhidev1 reportid 5: input=0, output=0, feature=5
uhidev2 at uhub3 port 1 configuration 1 interface 0 "PixArt Lenovo USB Optical
Mouse" rev 2.00/1.00 addr 2
uhidev2: iclass 3/1
ums0 at uhidev2: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
vscsi0 at root
scsibus6 at vscsi0: 256 targets
softraid0 at root
scsibus7 at softraid0: 256 targets
root on sd5a (f2d5da28e9d59e44.a) swap on sd5b dump on sd5b
initializing kernel modesetting (RV610 0x1002:0x94C1 0x1028:0x0D02).
drm:pid0:r600_init *ERROR* Expecting atombios for R600 GPU
drm:pid0:radeondrm_attachhook *ERROR* Fatal error during GPU init
[TTM] Memory type 2 has not been initialized
drm0 detached
radeondrm0 detached
vga1 at pci1 dev 0 function 0 "ATI Radeon HD 2400 XT" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation), using wskbd0
wskbd1: connecting to wsdisplay0
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
wsmouse0 detached
ums0 detached
uhidev2 detached
Thanks,
Andy
--
TAI64 timestamp: 400000005c1a6251
