On 2018-12-09, Denis <den...@mindall.org> wrote: > Stuck when running cvsync in rdomain 1. It seems cvsync does not using > second routing table because of pf.conf misconfiguration or something. > > em0 as a main ISP channel, ppp0 works as reserved wireless ISP channel. > Some system services like cvsync, git, ntp should use second routing > table (rtable 1) assigned to ppp0. > > # route -T1 exec cvsync -c /etc/cvsync.conf > Connecting to cvsync_server_remote_IP port 7777 > host cvsync_server_remote_IP port 7777: Can't assing requested address > service is not available at cvsync_server_remote_IP port 7777 > > --- configs > # cat /etc/hostname.em0 > rdomain 0 > dhcp > > # cat /etc/hostname.ppp0 > rdomain 1 > dhcp
DHCP doesn't run on PPP. > # pppd call ISP > > # ifconfig ppp0 > ppp0: flags=8051<UP,POINTTOPOINT,RUNNING,MULTICAST> rdomain 1 mtu 1500 > index 7 priority 0 llprio 3 > grups: ppp > inet ISP_ppp0_gateway --> local_ppp0_IP netmask 0xffffffc0 > > # route -T1 show > local_ppp0_IP ISP_ppp0_gateway_IP UH Prio 8 ppp0 > ISP_ppp0_gateway_IP ISP_ppp0_gateway_IP UHl Prio 1 ppp0 No default route. Perhaps you need to run pppd in rdomain 1? > # cat /etc/pf.conf > ... > match out on rdomain 0 from lo0 to any nat-to (em0) port 1024:65535 rtable 0 > match out on rdomain 1 from lo0 to any nat-to (ppp0) port 1024:65535 > rtable 1 > ... > pass out quick on ppp0 inet proto tcp from (ppp0) to any port 7777 flags > S/SA modulate state queue cvs > ... As an aside, I would recommend using rsync rather than cvsync - many of the repo mirrors offer this, it's noted on cvsync.html. cvsync is fragile and frequently breaks.
