Thanks for your answers. Probably I will buy one and check it out. > Everything seems to work just fine, only problems are that it can't > support a lot of graphical modes (xenocara will run, just not very well, > since the gpu only has 8 MB of memory and it comes from the main pool of > memory anyway). It does not matter to me. 8MB is OK for OS installation. I am not gonna use X, serial console and ssh is all I need.
On Thu, 22 Nov 2018 12:01:36 -0800 Misc User <open...@leviathanresearch.net> wrote: > On 11/22/2018 6:13 AM, Stuart Henderson wrote: > > On 2018-11-22, Radek <alee...@gmail.com> wrote: > >> Hello, > >> does anybody run OpenBSD 6.3/amd64 or 6.4/amd64 on SUPERMICRO X7SPA-HF > >> D510? > >> Does it work well together? > >> > >> I need to build a backup server (rsync only) with 2-3x 4TB HDD, 3U/4U Rack > >> case for better cooling. RAID is not needed. > >> It must be as silent as possible. Low power consumption is also welcomed. > >> > >> Thanks! > > > > Not sure if I have that *exact* board but I have something very similar, > > I wouldn't expect any problems with this. > > > > > > I am running the X7SPA-HF-D525 version (Same board, different chip. The > D525 and D510 are really just the same chip anyway, just that the D510 > has a slightly different set of bits burned into the configuration fuses). > > Everything seems to work just fine, only problems are that it can't > support a lot of graphical modes (xenocara will run, just not very well, > since the gpu only has 8 MB of memory and it comes from the main pool of > memory anyway). That and you can't communicate with the IPMI interface > from within the OS (But doesn't prevent you from using the IPMI > interface, you'd just need to do any configuration of it via BIOS or the > IPMI's web interface). > > dmesg from my system is below > > > OpenBSD 6.4 (GENERIC.MP) #0: Sat Nov 17 22:15:46 CET 2018 > > r...@syspatch-64-amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP > real mem = 4277665792 (4079MB) > avail mem = 4138745856 (3947MB) > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.6 @ 0x9ac00 (19 entries) > bios0: vendor American Megatrends Inc. version "1.2" date 09/14/11 > bios0: Supermicro X7SPA-HF > acpi0 at bios0: rev 2 > acpi0: sleep states S0 S1 S4 S5 > acpi0: tables DSDT FACP APIC MCFG OEMB HPET EINJ BERT ERST HEST > acpi0: wakeup devices P0P1(S4) USB0(S4) USB1(S4) USB2(S4) USB5(S4) > EUSB(S4) USB3(S4) USB4(S4) USB6(S4) USBE(S4) P0P4(S4) P0P5(S4) P0P6(S4) > P0P7(S4) P0P8(S4) P0P9(S4) [...] > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel(R) Atom(TM) CPU D525 @ 1.80GHz, 1800.30 MHz, 06-1c-0a > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,NXE,LONG,LAHF,PERF,SENSOR,MELTDOWN > cpu0: 512KB 64b/line 8-way L2 cache > cpu0: smt 0, core 0, package 0 > mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges > cpu0: apic clock running at 207MHz > cpu0: mwait min=64, max=64, C-substates=0.1, IBE > cpu1 at mainbus0: apid 2 (application processor) > cpu1: Intel(R) Atom(TM) CPU D525 @ 1.80GHz, 1872.00 MHz, 06-1c-0a > cpu1: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,NXE,LONG,LAHF,PERF,SENSOR,MELTDOWN > cpu1: 512KB 64b/line 8-way L2 cache > cpu1: smt 0, core 1, package 0 > ioapic0 at mainbus0: apid 3 pa 0xfec00000, version 20, 24 pins, remapped > acpimcfg0 at acpi0 > acpimcfg0: addr 0xe0000000, bus 0-255 > acpihpet0 at acpi0: 14318179 Hz > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus 4 (P0P1) > acpiprt2 at acpi0: bus 1 (P0P4) > acpiprt3 at acpi0: bus -1 (P0P5) > acpiprt4 at acpi0: bus -1 (P0P6) > acpiprt5 at acpi0: bus -1 (P0P7) > acpiprt6 at acpi0: bus 2 (P0P8) > acpiprt7 at acpi0: bus 3 (P0P9) > acpicpu0 at acpi0: C1(@1 halt!) > acpicpu1 at acpi0: C1(@1 halt!) > acpicmos0 at acpi0 > acpibtn0 at acpi0: PWRB > ipmi at mainbus0 not configured > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "Intel Pineview DMI" rev 0x02 > ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x02: msi > pci1 at ppb0 bus 1 > ppb1 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x02: msi > pci2 at ppb1 bus 2 > em0 at pci2 dev 0 function 0 "Intel 82574L" rev 0x00: msi, address > 00:25:90:62:cc:46 > ppb2 at pci0 dev 28 function 5 "Intel 82801I PCIE" rev 0x02: msi > pci3 at ppb2 bus 3 > em1 at pci3 dev 0 function 0 "Intel 82574L" rev 0x00: msi, address > 00:25:90:62:cc:47 > uhci0 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x02: apic 3 int 23 > uhci1 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x02: apic 3 int 19 > ehci0 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x02: apic 3 int 23 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev > 2.00/1.00 addr 1 > ppb3 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x92 > pci4 at ppb3 bus 4 > vga1 at pci4 dev 4 function 0 "Matrox MGA G200eW" rev 0x0a > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > pcib0 at pci0 dev 31 function 0 "Intel 82801IR LPC" rev 0x02 > ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x02: msi, AHCI 1.2 > ahci0: port 0: 3.0Gb/s > scsibus1 at ahci0: 32 targets > sd0 at scsibus1 targ 0 lun 0: <ATA, WDC WD1001FALS-0, 05.0> SCSI3 > 0/direct fixed naa.50014ee2059bdbc4 > sd0: 953869MB, 512 bytes/sector, 1953525168 sectors > ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x02: apic 3 > int 18 > iic0 at ichiic0 > lm1 at iic0 addr 0x2d: W83627DHG > spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-10600 SO-DIMM > spdmem1 at iic0 addr 0x51: 2GB DDR3 SDRAM PC3-10600 SO-DIMM > usb1 at uhci0: USB revision 1.0 > uhub1 at usb1 configuration 1 interface 0 "Intel UHCI root hub" rev > 1.00/1.00 addr 1 > usb2 at uhci1: USB revision 1.0 > uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev > 1.00/1.00 addr 1 > isa0 at pcib0 > isadma0 at isa0 > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > com2 at isa0 port 0x3e8/8 irq 5: ns16550a, 16 byte fifo > pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > pckbd0 at pckbc0 (kbd slot) > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > wbsio0 at isa0 port 0x2e/2: W83627DHG rev 0x25 > lm2 at wbsio0 port 0xca0/8: W83627DHG > lm1: disabling sensors due to alias with lm2 > uhidev0 at uhub0 port 2 configuration 1 interface 0 "Peppercon AG > Multidevice" rev 2.00/0.01 addr 2 > uhidev0: iclass 3/1 > ukbd0 at uhidev0: 8 variable keys, 6 key codes > wskbd1 at ukbd0 mux 1 > wskbd1: connecting to wsdisplay0 > uhidev1 at uhub0 port 2 configuration 1 interface 1 "Peppercon AG > Multidevice" rev 2.00/0.01 addr 2 > uhidev1: iclass 3/0 > ums0 at uhidev1: 3 buttons, Z dir > wsmouse0 at ums0 mux 0 > vscsi0 at root > scsibus2 at vscsi0: 256 targets > softraid0 at root > scsibus3 at softraid0: 256 targets > root on sd0a (f3f136d46a834706.a) swap on sd0b dump on sd0b > > -- radek
