Andrew Lemin [andrew.le...@gmail.com] wrote:
> Hi,
>
> I am running an ASRock J4105B-ITX board and wanting to run OpenBSD on this.
> https://www.asrock.com/MB/Intel/J4105B-ITX/index.asp#BIOS
>
> It boots up, and at the 'boot>' prompt I can use the keyboard find.
>
> However after it boots up, the keyboard stops working, and no disks are
> found by the installer (used auto_install to send test commands).
> It appears that there is no chipset support, for the Intel Celeron J4105
> CPU from what I can work out.
>
> To test that it was working fine and is just OpebBSD which is not working,
> I installed Linux and have included the dmesg below (from Linux).
> I cannot run a dmesg from the OpenBSD installer as I cannot use the
> keyboard etc.
>
The ASRock J4205-ITX (Apollo Lake) works fine, so does the J3710-ITX (Braswell).
I use them both headless, but they work fine when I plug in a USB keyboard.
The J4105-ITX (Gemini Lake) is newer than either.
What kind of keyboard are you using? If it's not USB, plug in a USB keyboard.
Although it may not work at the boot> prompt, it will work once you are booted
up.
For fun, here are dmesg for the older versions of your board. They both work
with USB input devices.
Braswell
--------
OpenBSD 6.3-current (GENERIC.MP) #21: Fri Jun 29 17:32:47 PDT 2018
ch...@r8.nmedia.net:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 8023584768 (7651MB)
avail mem = 7771283456 (7411MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.8 @ 0xecec0 (18 entries)
bios0: vendor American Megatrends Inc. version "P1.30" date 03/30/2016
bios0: ASRock J3710-ITX
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC FPDT FIDT AAFT MCFG HPET SSDT SSDT SSDT UEFI LPIT
CSRT
acpi0: wakeup devices UAR1(S4) XHC1(S4) HDEF(S4) PXSX(S4) RP01(S4) PXSX(S4)
RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) BRCM(S0) PWRB(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Pentium(R) CPU J3710 @ 1.60GHz, 1600.37 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,RDRAND,NXE,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,SMEP,ERMS,SENSOR,ARAT,MELTDOWN
cpu0: 1MB 64b/line 16-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 79MHz
cpu0: mwait min=64, max=64, C-substates=0.2.0.0.0.0.3.3, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Pentium(R) CPU J3710 @ 1.60GHz, 1600.00 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,RDRAND,NXE,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,SMEP,ERMS,SENSOR,ARAT,MELTDOWN
cpu1: 1MB 64b/line 16-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Pentium(R) CPU J3710 @ 1.60GHz, 1600.00 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,RDRAND,NXE,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,SMEP,ERMS,SENSOR,ARAT,MELTDOWN
cpu2: 1MB 64b/line 16-way L2 cache
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Pentium(R) CPU J3710 @ 1.60GHz, 1600.00 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,RDRAND,NXE,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,SMEP,ERMS,SENSOR,ARAT,MELTDOWN
cpu3: 1MB 64b/line 16-way L2 cache
cpu3: smt 0, core 3, package 0
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 115 pins
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (RP01)
acpiprt2 at acpi0: bus 2 (RP02)
acpiprt3 at acpi0: bus 3 (RP03)
acpiprt4 at acpi0: bus 4 (RP04)
acpiec0 at acpi0: not present
acpicpu0 at acpi0: C3(10@1000 mwait.1@0x64), C2(10@500 mwait.1@0x58), C1(1000@1
mwait.1), PSS
acpicpu1 at acpi0: C3(10@1000 mwait.1@0x64), C2(10@500 mwait.1@0x58), C1(1000@1
mwait.1), PSS
acpicpu2 at acpi0: C3(10@1000 mwait.1@0x64), C2(10@500 mwait.1@0x58), C1(1000@1
mwait.1), PSS
acpicpu3 at acpi0: C3(10@1000 mwait.1@0x64), C2(10@500 mwait.1@0x58), C1(1000@1
mwait.1), PSS
acpipwrres0 at acpi0: CLK0, resource for CAMD
acpipwrres1 at acpi0: CLK0, resource for CAM1
acpipwrres2 at acpi0: CLK1, resource for CAM2, CAM3
acpipwrres3 at acpi0: USBC, resource for XHC1
acpicmos0 at acpi0
"BCM43241" at acpi0 not configured
"BCM2E64" at acpi0 not configured
"BCM4752" at acpi0 not configured
"SMO91D0" at acpi0 not configured
"INT33F7" at acpi0 not configured
"INT33BE" at acpi0 not configured
"INTCF1C" at acpi0 not configured
"MSFT0002" at acpi0 not configured
acpibtn0 at acpi0: PWRB
acpibtn1 at acpi0: SLPB
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD1F
cpu0: Enhanced SpeedStep 1600 MHz: speeds: 1601, 1600, 1520, 1440, 1360, 1280,
1200, 1120, 1040, 960, 880, 800, 720, 640, 560, 480 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Braswell Host" rev 0x35
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics" rev 0x35
drm0 at inteldrm0
inteldrm0: msi
inteldrm0: 1024x768, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
ahci0 at pci0 dev 19 function 0 "Intel Braswell AHCI" rev 0x35: msi, AHCI 1.3.1
ahci0: port 0: 6.0Gb/s
ahci0: port 1: 6.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, HFS250G32TND-N1A, 3000> SCSI3 0/direct
fixed t10.ATA_HFS250G32TND-N1A2A_FS67N121611207N6G_
sd0: 238475MB, 512 bytes/sector, 488397168 sectors, thin
sd1 at scsibus1 targ 1 lun 0: <ATA, ST2000DM001-1CH1, CC27> SCSI3 0/direct
fixed naa.5000c500653bc225
sd1: 1907729MB, 512 bytes/sector, 3907029168 sectors
xhci0 at pci0 dev 20 function 0 "Intel Braswell xHCI" rev 0x35: msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00
addr 1
"Intel Braswell TXE" rev 0x35 at pci0 dev 26 function 0 not configured
ppb0 at pci0 dev 28 function 0 "Intel Braswell PCIE" rev 0x35: msi
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 1 "Intel Braswell PCIE" rev 0x35: msi
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 2 "Intel Braswell PCIE" rev 0x35: msi
pci3 at ppb2 bus 3
re0 at pci3 dev 0 function 0 "Realtek 8168" rev 0x11: RTL8168G/8111G (0x4c00),
msi, address 70:85:c2:05:57:e7
rgephy0 at re0 phy 7: RTL8251 PHY, rev. 0
ppb3 at pci0 dev 28 function 3 "Intel Braswell PCIE" rev 0x35: msi
pci4 at ppb3 bus 4
ahci1 at pci4 dev 0 function 0 "ASMedia ASM1061 AHCI" rev 0x02: msi, AHCI 1.2
scsibus2 at ahci1: 32 targets
pcib0 at pci0 dev 31 function 0 "Intel Braswell PCU LPC" rev 0x35
ichiic0 at pci0 dev 31 function 3 "Intel Braswell SMBus" rev 0x35: apic 1 int 18
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-12800 SO-DIMM
spdmem1 at iic0 addr 0x51: 4GB DDR3 SDRAM PC3-12800 SO-DIMM
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
wbsio0 at isa0 port 0x2e/2: NCT6776F rev 0x33
lm1 at wbsio0 port 0x290/8: NCT6776F
vmm0 at mainbus0: VMX/EPT
uhub1 at uhub0 port 1 configuration 1 interface 0 "ASMedia AS2107" rev
2.10/0.01 addr 2
uhub2 at uhub0 port 5 configuration 1 interface 0 "Genesys Logic USB2.0 Hub"
rev 2.00/88.31 addr 3
uhub3 at uhub0 port 8 configuration 1 interface 0 "ASMedia AS2107" rev
3.00/0.01 addr 4
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
root on sd0a (9c842068a9b98834.a) swap on sd0b dump on sd0b
Apollo Lake
-----------
OpenBSD 6.4 (GENERIC.MP) #0: Sat Nov 17 22:15:46 CET 2018
r...@syspatch-64-amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 8209932288 (7829MB)
avail mem = 7951843328 (7583MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 3.0 @ 0xed450 (18 entries)
bios0: vendor American Megatrends Inc. version "P1.30" date 04/18/2017
bios0: ASRock J4205-ITX
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP FPDT FIDT MCFG DBG2 DBGP HPET LPIT APIC NPKT PRAM WSMT
SSDT SSDT AAFT SSDT SSDT SSDT SSDT SSDT UEFI WDAT
acpi0: wakeup devices SIO1(S3) UAR1(S4) HDAS(S3) XHC_(S4) XDCI(S4) BRCM(S0)
PXSX(S4) RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4)
PXSX(S4) RP05(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpimcfg0 at acpi0
acpimcfg0: addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 19200000 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Pentium(R) CPU J4205 @ 1.50GHz, 1497.01 MHz, 06-5c-09
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,FSGSBASE,SMEP,ERMS,MPX,RDSEED,SMAP,CLFLUSHOPT,PT,SHA,IBRS,IBPB,STIBP,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
cpu0: 1MB 64b/line 16-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 19MHz
cpu0: mwait min=64, max=64, C-substates=0.2.0.2.4.2.1.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Pentium(R) CPU J4205 @ 1.50GHz, 1496.56 MHz, 06-5c-09
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,FSGSBASE,SMEP,ERMS,MPX,RDSEED,SMAP,CLFLUSHOPT,PT,SHA,IBRS,IBPB,STIBP,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
cpu1: 1MB 64b/line 16-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Pentium(R) CPU J4205 @ 1.50GHz, 1496.56 MHz, 06-5c-09
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,FSGSBASE,SMEP,ERMS,MPX,RDSEED,SMAP,CLFLUSHOPT,PT,SHA,IBRS,IBPB,STIBP,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
cpu2: 1MB 64b/line 16-way L2 cache
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Pentium(R) CPU J4205 @ 1.50GHz, 1496.56 MHz, 06-5c-09
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,FSGSBASE,SMEP,ERMS,MPX,RDSEED,SMAP,CLFLUSHOPT,PT,SHA,IBRS,IBPB,STIBP,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
cpu3: 1MB 64b/line 16-way L2 cache
cpu3: smt 0, core 3, package 0
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 120 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (RP03)
acpiprt2 at acpi0: bus 2 (RP04)
acpiprt3 at acpi0: bus 3 (RP05)
acpiprt4 at acpi0: bus 4 (RP06)
acpiec0 at acpi0: not present
acpicpu0 at acpi0: C3(10@150 mwait.1@0x60), C2(10@50 mwait.1@0x21), C1(1000@1
mwait.1@0x1), PSS
acpicpu1 at acpi0: C3(10@150 mwait.1@0x60), C2(10@50 mwait.1@0x21), C1(1000@1
mwait.1@0x1), PSS
acpicpu2 at acpi0: C3(10@150 mwait.1@0x60), C2(10@50 mwait.1@0x21), C1(1000@1
mwait.1@0x1), PSS
acpicpu3 at acpi0: C3(10@150 mwait.1@0x60), C2(10@50 mwait.1@0x21), C1(1000@1
mwait.1@0x1), PSS
acpipwrres0 at acpi0: FN00, resource for FAN0
acpitz0 at acpi0: critical temperature is 100 degC
acpicmos0 at acpi0
acpibtn0 at acpi0: PWRB
"INT3452" at acpi0 not configured
"INT3452" at acpi0 not configured
"INT3452" at acpi0 not configured
"INT3452" at acpi0 not configured
"INT33A1" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD1F
cpu0: Enhanced SpeedStep 1497 MHz: speeds: 1501, 1500, 1400, 1300, 1200, 1100,
1000, 900, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Apollo Lake Host" rev 0x0b
inteldrm0 at pci0 dev 2 function 0 vendor "Intel", unknown product 0x5a84 rev
0x0b
drm0 at inteldrm0
inteldrm0: msi
error: [drm:pid0:i915_firmware_load_error_print] *ERROR* failed to load
firmware i915/bxt_dmc_ver1.bin (-22)
error: [drm:pid0:i915_gem_init_hw] *ERROR* Failed to initialize GuC, error -8
(ignored)
inteldrm0: 1024x768, 32bpp
Unclaimed register detected after writing to register 0x68970
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel Apollo Lake TXE" rev 0x0b at pci0 dev 15 function 0 not configured
ahci0 at pci0 dev 18 function 0 "Intel Apollo Lake AHCI" rev 0x0b: msi, AHCI
1.3.1
ahci0: port 0: 6.0Gb/s
ahci0: port 1: 6.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, INTEL SSDSC2BB24, D201> SCSI3 0/direct
fixed naa.55cd2e404c522549
sd0: 228936MB, 512 bytes/sector, 468862128 sectors, thin
sd1 at scsibus1 targ 1 lun 0: <ATA, INTEL SSDSC2BB24, D201> SCSI3 0/direct
fixed naa.55cd2e404c521c42
sd1: 228936MB, 512 bytes/sector, 468862128 sectors, thin
ppb0 at pci0 dev 19 function 0 "Intel Apollo Lake PCIE" rev 0xfb: msi
pci1 at ppb0 bus 1
re0 at pci1 dev 0 function 0 "Realtek 8168" rev 0x11: RTL8168G/8111G (0x4c00),
msi, address 70:85:c2:43:c0:f8
rgephy0 at re0 phy 7: RTL8251 PHY, rev. 0
ppb1 at pci0 dev 19 function 1 "Intel Apollo Lake PCIE" rev 0xfb: msi
pci2 at ppb1 bus 2
ppb2 at pci0 dev 19 function 2 "Intel Apollo Lake PCIE" rev 0xfb: msi
pci3 at ppb2 bus 3
ahci1 at pci3 dev 0 function 0 "ASMedia ASM1061 AHCI" rev 0x02: msi, AHCI 1.2
ahci1: port 0: 6.0Gb/s
ahci1: port 1: 6.0Gb/s
scsibus2 at ahci1: 32 targets
sd2 at scsibus2 targ 0 lun 0: <ATA, Crucial_CT480M50, MU05> SCSI3 0/direct
fixed naa.500a07510c263e53
sd2: 457862MB, 512 bytes/sector, 937703088 sectors, thin
sd3 at scsibus2 targ 1 lun 0: <ATA, Crucial_CT480M50, MU05> SCSI3 0/direct
fixed naa.500a07510c263e41
sd3: 457862MB, 512 bytes/sector, 937703088 sectors, thin
ppb3 at pci0 dev 19 function 3 vendor "Intel", unknown product 0x5adb rev 0xfb:
msi
pci4 at ppb3 bus 4
xhci0 at pci0 dev 21 function 0 "Intel Apollo Lake xHCI" rev 0x0b: msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00
addr 1
pcib0 at pci0 dev 31 function 0 "Intel Apollo Lake LPC" rev 0x0b
ichiic0 at pci0 dev 31 function 1 "Intel Apollo Lake SMBus" rev 0x0b: polling
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-12800 SO-DIMM
spdmem1 at iic0 addr 0x52: 4GB DDR3 SDRAM PC3-12800 SO-DIMM
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
vmm0 at mainbus0: VMX/EPT
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
sd4 at scsibus4 targ 1 lun 0: <OPENBSD, SR RAID 1, 006> SCSI2 0/direct fixed
sd4: 228933MB, 512 bytes/sector, 468856433 sectors
sd5 at scsibus4 targ 2 lun 0: <OPENBSD, SR RAID 1, 006> SCSI2 0/direct fixed
sd5: 457860MB, 512 bytes/sector, 937697393 sectors
root on sd4a (dd533a2b98d638c9.a) swap on sd4b dump on sd4b
