Thanks all for your answers. I did think that i had checked everything before posting something on the mailing list, but missed the current faq.
Arnoud On Saturday, November 10, 2018 23:32 CET, Zé Loff <zel...@zeloff.org> wrote: > > On Sat, Nov 10, 2018 at 04:00:53PM -0500, Arnoud Otten wrote: > > Startx doesn`t work anymore on my Lenovo W520. > > I had a working X setup with Mate on 6.4 stable. Then i did an upgrade to > > 6.4 current, snapshot from 5 Nov, and couldn`t start X anymore. > > > > Did a fresh install with that snapshot, and found out, root could start X. > > Upgrade to snapshot from 9 Nov did not resolve the problem for the user > > also a clean install did not. > > > > I found this thread about SUID on Xorg, and this fixed the problem for my > > situation: > > > > chmod 4755 Xorg > > > > https://groups.google.com/forum/#!topic/mailing.openbsd.bugs/VKf8XZAco08 > > You really should read www.openbsd.org/faq/current.html before > upgrading. As of Oct-26 the Xorg binary is deliberately *not* installed > setuid, which I suppose has something to do with the recently detected > security hole: > > https://www.securityweek.com/xorg-flaw-exposes-unix-oses-attacks > > I guess removing setuid is a quick workaround which was necessary given > that OpenBSD developers were kept in the dark about it for much longer > than necessary: > > https://marc.info/?l=openbsd-tech&m=154050351216908&w=2 > > So, the solution you provide is, basically, to revert the safeguard that > was put it place to obviate the security hole. And since you apparently > didn't read the FAQ page on upgrading, you are more than likely to get > scolded on misc@... > > Just use xenodm for the time being (that's what I did too). Probably > permanently too: > > https://marc.info/?l=openbsd-cvs&m=154050453117246&w=2 > > Good luck > Zé > > > [ 198.792] > > X.Org X Server 1.19.6 > > Release Date: 2017-12-20 > > [ 198.819] X Protocol Version 11, Revision 0 > > [ 198.833] Build Operating System: OpenBSD 6.4 amd64 > > [ 198.846] Current Operating System: OpenBSD bsd520.my.domain 6.4 > > GENERIC.MP#429 amd64 > > [ 198.860] Build Date: 09 November 2018 11:59:57AM > > [ 198.874] > > [ 198.888] Current version of pixman: 0.34.0 > > [ 198.901] Before reporting problems, check http://wiki.x.org > > to make sure that you have the latest version. > > [ 198.901] Markers: (--) probed, (**) from config file, (==) default > > setting, > > (++) from command line, (!!) notice, (II) informational, > > (WW) warning, (EE) error, (NI) not implemented, (??) unknown. > > [ 198.957] (==) Log file: "/home/arnoud/.local/share/xorg/Xorg.0.log", > > Time: Sat Nov 10 21:24:06 2018 > > [ 198.972] (==) Using system config directory > > "/usr/X11R6/share/X11/xorg.conf.d" > > [ 198.972] (==) No Layout section. Using the first Screen section. > > [ 198.972] (==) No screen section available. Using defaults. > > [ 198.972] (**) |-->Screen "Default Screen Section" (0) > > [ 198.972] (**) | |-->Monitor "<default monitor>" > > [ 198.972] (==) No monitor specified for screen "Default Screen Section". > > Using a default monitor configuration. > > [ 198.972] (==) Automatically adding devices > > [ 198.972] (==) Automatically enabling devices > > [ 198.972] (==) Not automatically adding GPU devices > > [ 198.972] (==) Max clients allowed: 256, resource mask: 0x1fffff > > [ 198.973] (==) FontPath set to: > > /usr/X11R6/lib/X11/fonts/misc/, > > /usr/X11R6/lib/X11/fonts/TTF/, > > /usr/X11R6/lib/X11/fonts/OTF/, > > /usr/X11R6/lib/X11/fonts/Type1/, > > /usr/X11R6/lib/X11/fonts/100dpi/, > > /usr/X11R6/lib/X11/fonts/75dpi/ > > [ 198.973] (==) ModulePath set to "/usr/X11R6/lib/modules" > > [ 198.973] (II) The server relies on wscons to provide the list of input > > devices. > > If no devices become available, reconfigure wscons or disable > > AutoAddDevices. > > [ 198.973] (II) Loader magic: 0x9d2ea27c000 > > [ 198.973] (II) Module ABI versions: > > [ 198.973] X.Org ANSI C Emulation: 0.4 > > [ 198.973] X.Org Video Driver: 23.0 > > [ 198.973] X.Org XInput driver : 24.1 > > [ 198.973] X.Org Server Extension : 10.0 > > [ 198.973] (WW) checkDevMem: failed to open /dev/xf86 and /dev/mem > > (Permission denied) > > Check that you have set 'machdep.allowaperture=1' > > in /etc/sysctl.conf and reboot your machine > > refer to xf86(4) for details > > [ 198.973] linear framebuffer access unavailable > > [ 198.973] (II) LoadModule: "glx" > > [ 198.974] (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so > > [ 198.978] (II) Module glx: vendor="X.Org Foundation" > > [ 198.978] compiled for 1.19.6, module version = 1.0.0 > > [ 198.978] ABI class: X.Org Server Extension, version 10.0 > > [ 198.978] (==) Assigned the driver to the xf86ConfigLayout > > [ 198.978] (EE) No drivers available. > > [ 198.978] (EE) > > Fatal server error: > > [ 198.991] (EE) no screens found(EE) > > [ 199.005] (EE) > > Please consult the The X.Org Foundation support > > at http://wiki.x.org > > for help. > > [ 199.018] (EE) Please also check the log file at > > "/home/arnoud/.local/share/xorg/Xorg.0.log" for additional information. > > [ 199.032] (EE) > > [ 199.048] (EE) Server terminated with error (1). Closing log file. > > > > > > > > > > > > > > OpenBSD Snapshot 9 November > > > > > > > > > > OpenBSD 6.4-current (GENERIC.MP) #429: Fri Nov 9 11:38:58 MST 2018 > > dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP > > real mem = 17041059840 (16251MB) > > avail mem = 16515330048 (15750MB) > > mpath0 at root > > scsibus0 at mpath0: 256 targets > > mainbus0 at root > > bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xdae9c000 (67 entries) > > bios0: vendor LENOVO version "8BET66WW (1.46 )" date 06/14/2018 > > bios0: LENOVO 4284Y54 > > acpi0 at bios0: rev 2 > > acpi0: sleep states S0 S3 S4 S5 > > acpi0: tables DSDT FACP SLIC SSDT SSDT SSDT HPET APIC MCFG ECDT ASF! TCPA > > SSDT SSDT UEFI UEFI UEFI > > acpi0: wakeup devices LID_(S3) SLPB(S3) IGBE(S4) EXP4(S4) EXP7(S4) EHC1(S3) > > EHC2(S3) HDEF(S4) > > acpitimer0 at acpi0: 3579545 Hz, 24 bits > > acpihpet0 at acpi0: 14318179 Hz > > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > > cpu0 at mainbus0: apid 0 (boot processor) > > cpu0: Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz, 2193.20 MHz, 06-2a-07 > > cpu0: > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN > > cpu0: 256KB 64b/line 8-way L2 cache > > cpu0: smt 0, core 0, package 0 > > mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges > > cpu0: apic clock running at 99MHz > > cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE > > cpu1 at mainbus0: apid 1 (application processor) > > cpu1: Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz, 2192.88 MHz, 06-2a-07 > > cpu1: > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN > > cpu1: 256KB 64b/line 8-way L2 cache > > cpu1: smt 1, core 0, package 0 > > cpu2 at mainbus0: apid 2 (application processor) > > cpu2: Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz, 2192.88 MHz, 06-2a-07 > > cpu2: > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN > > cpu2: 256KB 64b/line 8-way L2 cache > > cpu2: smt 0, core 1, package 0 > > cpu3 at mainbus0: apid 3 (application processor) > > cpu3: Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz, 2192.88 MHz, 06-2a-07 > > cpu3: > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN > > cpu3: 256KB 64b/line 8-way L2 cache > > cpu3: smt 1, core 1, package 0 > > cpu4 at mainbus0: apid 4 (application processor) > > cpu4: Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz, 2192.88 MHz, 06-2a-07 > > cpu4: > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN > > cpu4: 256KB 64b/line 8-way L2 cache > > cpu4: smt 0, core 2, package 0 > > cpu5 at mainbus0: apid 5 (application processor) > > cpu5: Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz, 2192.88 MHz, 06-2a-07 > > cpu5: > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN > > cpu5: 256KB 64b/line 8-way L2 cache > > cpu5: smt 1, core 2, package 0 > > cpu6 at mainbus0: apid 6 (application processor) > > cpu6: Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz, 2192.88 MHz, 06-2a-07 > > cpu6: > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN > > cpu6: 256KB 64b/line 8-way L2 cache > > cpu6: smt 0, core 3, package 0 > > cpu7 at mainbus0: apid 7 (application processor) > > cpu7: Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz, 2192.88 MHz, 06-2a-07 > > cpu7: > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN > > cpu7: 256KB 64b/line 8-way L2 cache > > cpu7: smt 1, core 3, package 0 > > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins > > acpimcfg0 at acpi0 > > acpimcfg0: addr 0xf8000000, bus 0-63 > > acpiec0 at acpi0 > > acpiprt0 at acpi0: bus 0 (PCI0) > > acpiprt1 at acpi0: bus -1 (PEG_) > > acpiprt2 at acpi0: bus 2 (EXP1) > > acpiprt3 at acpi0: bus 3 (EXP2) > > acpiprt4 at acpi0: bus -1 (EXP4) > > acpiprt5 at acpi0: bus 13 (EXP5) > > acpiprt6 at acpi0: bus 14 (EXP7) > > acpicpu0 at acpi0: C3(350@104 io@0x415), C1(1000@1 halt), PSS > > acpicpu1 at acpi0: C3(350@104 io@0x415), C1(1000@1 halt), PSS > > acpicpu2 at acpi0: C3(350@104 io@0x415), C1(1000@1 halt), PSS > > acpicpu3 at acpi0: C3(350@104 io@0x415), C1(1000@1 halt), PSS > > acpicpu4 at acpi0: C3(350@104 io@0x415), C1(1000@1 halt), PSS > > acpicpu5 at acpi0: C3(350@104 io@0x415), C1(1000@1 halt), PSS > > acpicpu6 at acpi0: C3(350@104 io@0x415), C1(1000@1 halt), PSS > > acpicpu7 at acpi0: C3(350@104 io@0x415), C1(1000@1 halt), PSS > > acpipwrres0 at acpi0: PUBS, resource for EHC1, EHC2 > > acpitz0 at acpi0: critical temperature is 99 degC > > acpibtn0 at acpi0: LID_ > > acpibtn1 at acpi0: SLPB > > acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001 > > acpicmos0 at acpi0 > > acpibat0 at acpi0: BAT0 model "42T4969" serial 13194 type LION oem "LGC" > > acpiac0 at acpi0: AC unit online > > acpithinkpad0 at acpi0 > > "PNP0C14" at acpi0 not configured > > "PNP0C14" at acpi0 not configured > > acpivideo0 at acpi0: VID_ > > acpivout at acpivideo0 not configured > > acpivideo1 at acpi0: VID_ > > cpu0: Enhanced SpeedStep 2193 MHz: speeds: 2201, 2200, 2000, 1900, 1800, > > 1700, 1600, 1500, 1400, 1300, 1200, 1100, 1000, 900, 800 MHz > > pci0 at mainbus0 bus 0 > > pchb0 at pci0 dev 0 function 0 "Intel Core 2G Host" rev 0x09 > > inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 3000" rev 0x09 > > drm0 at inteldrm0 > > inteldrm0: msi > > inteldrm0: 1600x900, 32bpp > > wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation) > > wsdisplay0: screen 1-5 added (std, vt100 emulation) > > "Intel 6 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured > > em0 at pci0 dev 25 function 0 "Intel 82579LM" rev 0x04: msi, address > > f0:de:f1:dc:af:d1 > > ehci0 at pci0 dev 26 function 0 "Intel 6 Series USB" rev 0x04: apic 2 int 16 > > usb0 at ehci0: USB revision 2.0 > > uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev > > 2.00/1.00 addr 1 > > azalia0 at pci0 dev 27 function 0 "Intel 6 Series HD Audio" rev 0x04: msi > > azalia0: codecs: Conexant CX20590 > > audio0 at azalia0 > > ppb0 at pci0 dev 28 function 0 "Intel 6 Series PCIE" rev 0xb4: msi > > pci1 at ppb0 bus 2 > > ppb1 at pci0 dev 28 function 1 "Intel 6 Series PCIE" rev 0xb4: msi > > pci2 at ppb1 bus 3 > > iwn0 at pci2 dev 0 function 0 "Intel Centrino Advanced-N 6205" rev 0x34: > > msi, MIMO 2T2R, MoW, address 10:0b:a9:e8:b9:c4 > > ppb2 at pci0 dev 28 function 4 "Intel 6 Series PCIE" rev 0xb4: msi > > pci3 at ppb2 bus 13 > > sdhc0 at pci3 dev 0 function 0 "Ricoh 5U822 SD/MMC" rev 0x08: apic 2 int 16 > > sdhc0: SDHC 3.0, 50 MHz base clock > > sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed, dma > > ppb3 at pci0 dev 28 function 6 "Intel 6 Series PCIE" rev 0xb4: msi > > pci4 at ppb3 bus 14 > > xhci0 at pci4 dev 0 function 0 "NEC xHCI" rev 0x04: msi, xHCI 0.150 > > usb1 at xhci0: USB revision 3.0 > > uhub1 at usb1 configuration 1 interface 0 "NEC xHCI root hub" rev 3.00/1.00 > > addr 1 > > ehci1 at pci0 dev 29 function 0 "Intel 6 Series USB" rev 0x04: apic 2 int 23 > > usb2 at ehci1: USB revision 2.0 > > uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev > > 2.00/1.00 addr 1 > > pcib0 at pci0 dev 31 function 0 "Intel QM67 LPC" rev 0x04 > > ahci0 at pci0 dev 31 function 2 "Intel 6 Series AHCI" rev 0x04: msi, AHCI > > 1.3 > > ahci0: port 0: 6.0Gb/s > > ahci0: port 1: 6.0Gb/s > > scsibus1 at ahci0: 32 targets > > sd0 at scsibus1 targ 0 lun 0: <ATA, Crucial_CT525MX3, M0C> SCSI3 0/direct > > fixed naa.500a07511663156f > > sd0: 500786MB, 512 bytes/sector, 1025610768 sectors, thin > > sd1 at scsibus1 targ 1 lun 0: <ATA, KINGSTON SV300S3, 60AA> SCSI3 0/direct > > fixed naa.50026b775903a00a > > sd1: 114473MB, 512 bytes/sector, 234441648 sectors, thin > > ichiic0 at pci0 dev 31 function 3 "Intel 6 Series SMBus" rev 0x04: apic 2 > > int 18 > > iic0 at ichiic0 > > spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-10600 SO-DIMM > > spdmem1 at iic0 addr 0x51: 4GB DDR3 SDRAM PC3-10600 SO-DIMM > > spdmem2 at iic0 addr 0x52: 4GB DDR3 SDRAM PC3-10600 SO-DIMM > > spdmem3 at iic0 addr 0x53: 4GB DDR3 SDRAM PC3-10600 SO-DIMM > > isa0 at pcib0 > > isadma0 at isa0 > > pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > > pckbd0 at pckbc0 (kbd slot) > > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > > pms0 at pckbc0 (aux slot) > > wsmouse0 at pms0 mux 0 > > wsmouse1 at pms0 mux 0 > > pms0: Synaptics touchpad, firmware 7.2, 0x1c0b1 0xb40000 > > pcppi0 at isa0 port 0x61 > > spkr0 at pcppi0 > > aps0 at isa0 port 0x1600/31 > > vmm0 at mainbus0: VMX/EPT > > uhub3 at uhub0 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" > > rev 2.00/0.00 addr 2 > > ugen0 at uhub3 port 3 "UPEK Biometric Coprocessor" rev 1.01/0.02 addr 3 > > uvideo0 at uhub3 port 6 configuration 1 interface 0 "Chicony Electronics > > Co., Ltd. Integrated Camera" rev 2.00/8.54 addr 4 > > video0 at uvideo0 > > uhub4 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" > > rev 2.00/0.00 addr 2 > > uhidev0 at uhub4 port 2 configuration 1 interface 0 "Microsoft > > Microsoft\M-. Comfort Mouse 4500" rev 2.00/0.83 addr 3 > > uhidev0: iclass 3/1, 28 report ids > > ums0 at uhidev0 reportid 16: 5 buttons, Z and W dir > > wsmouse2 at ums0 mux 0 > > uhid0 at uhidev0 reportid 18: input=0, output=0, feature=1 > > uhid1 at uhidev0 reportid 19: input=1, output=0, feature=0 > > uhid2 at uhidev0 reportid 22: input=4, output=0, feature=0 > > uhid3 at uhidev0 reportid 23: input=0, output=0, feature=1 > > uhid4 at uhidev0 reportid 24: input=0, output=0, feature=1 > > uhid5 at uhidev0 reportid 28: input=1, output=0, feature=0 > > vscsi0 at root > > scsibus2 at vscsi0: 256 targets > > softraid0 at root > > scsibus3 at softraid0: 256 targets > > root on sd1a (e7e1547196603968.a) swap on sd1b dump on sd1b > > syncing disks... done > > rebooting... > > OpenBSD 6.4-current (GENERIC.MP) #429: Fri Nov 9 11:38:58 MST 2018 > > dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP > > real mem = 17041059840 (16251MB) > > avail mem = 16515338240 (15750MB) > > mpath0 at root > > scsibus0 at mpath0: 256 targets > > mainbus0 at root > > bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xdae9c000 (67 entries) > > bios0: vendor LENOVO version "8BET66WW (1.46 )" date 06/14/2018 > > bios0: LENOVO 4284Y54 > > acpi0 at bios0: rev 2 > > acpi0: sleep states S0 S3 S4 S5 > > acpi0: tables DSDT FACP SLIC SSDT SSDT SSDT HPET APIC MCFG ECDT ASF! TCPA > > SSDT SSDT UEFI UEFI UEFI > > acpi0: wakeup devices LID_(S3) SLPB(S3) IGBE(S4) EXP4(S4) EXP7(S4) EHC1(S3) > > EHC2(S3) HDEF(S4) > > acpitimer0 at acpi0: 3579545 Hz, 24 bits > > acpihpet0 at acpi0: 14318179 Hz > > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > > cpu0 at mainbus0: apid 0 (boot processor) > > cpu0: Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz, 2193.25 MHz, 06-2a-07 > > cpu0: > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN > > cpu0: 256KB 64b/line 8-way L2 cache > > cpu0: smt 0, core 0, package 0 > > mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges > > cpu0: apic clock running at 99MHz > > cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE > > cpu1 at mainbus0: apid 1 (application processor) > > cpu1: Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz, 2192.88 MHz, 06-2a-07 > > cpu1: > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN > > cpu1: 256KB 64b/line 8-way L2 cache > > cpu1: smt 1, core 0, package 0 > > cpu2 at mainbus0: apid 2 (application processor) > > cpu2: Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz, 2192.88 MHz, 06-2a-07 > > cpu2: > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN > > cpu2: 256KB 64b/line 8-way L2 cache > > cpu2: smt 0, core 1, package 0 > > cpu3 at mainbus0: apid 3 (application processor) > > cpu3: Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz, 2192.88 MHz, 06-2a-07 > > cpu3: > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN > > cpu3: 256KB 64b/line 8-way L2 cache > > cpu3: smt 1, core 1, package 0 > > cpu4 at mainbus0: apid 4 (application processor) > > cpu4: Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz, 2192.88 MHz, 06-2a-07 > > cpu4: > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN > > cpu4: 256KB 64b/line 8-way L2 cache > > cpu4: smt 0, core 2, package 0 > > cpu5 at mainbus0: apid 5 (application processor) > > cpu5: Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz, 2192.88 MHz, 06-2a-07 > > cpu5: > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN > > cpu5: 256KB 64b/line 8-way L2 cache > > cpu5: smt 1, core 2, package 0 > > cpu6 at mainbus0: apid 6 (application processor) > > cpu6: Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz, 2192.88 MHz, 06-2a-07 > > cpu6: > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN > > cpu6: 256KB 64b/line 8-way L2 cache > > cpu6: smt 0, core 3, package 0 > > cpu7 at mainbus0: apid 7 (application processor) > > cpu7: Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz, 2192.88 MHz, 06-2a-07 > > cpu7: > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN > > cpu7: 256KB 64b/line 8-way L2 cache > > cpu7: smt 1, core 3, package 0 > > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins > > acpimcfg0 at acpi0 > > acpimcfg0: addr 0xf8000000, bus 0-63 > > acpiec0 at acpi0 > > acpiprt0 at acpi0: bus 0 (PCI0) > > acpiprt1 at acpi0: bus -1 (PEG_) > > acpiprt2 at acpi0: bus 2 (EXP1) > > acpiprt3 at acpi0: bus 3 (EXP2) > > acpiprt4 at acpi0: bus -1 (EXP4) > > acpiprt5 at acpi0: bus 13 (EXP5) > > acpiprt6 at acpi0: bus 14 (EXP7) > > acpicpu0 at acpi0: C3(350@104 io@0x415), C1(1000@1 halt), PSS > > acpicpu1 at acpi0: C3(350@104 io@0x415), C1(1000@1 halt), PSS > > acpicpu2 at acpi0: C3(350@104 io@0x415), C1(1000@1 halt), PSS > > acpicpu3 at acpi0: C3(350@104 io@0x415), C1(1000@1 halt), PSS > > acpicpu4 at acpi0: C3(350@104 io@0x415), C1(1000@1 halt), PSS > > acpicpu5 at acpi0: C3(350@104 io@0x415), C1(1000@1 halt), PSS > > acpicpu6 at acpi0: C3(350@104 io@0x415), C1(1000@1 halt), PSS > > acpicpu7 at acpi0: C3(350@104 io@0x415), C1(1000@1 halt), PSS > > acpipwrres0 at acpi0: PUBS, resource for EHC1, EHC2 > > acpitz0 at acpi0: critical temperature is 99 degC > > acpibtn0 at acpi0: LID_ > > acpibtn1 at acpi0: SLPB > > acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001 > > acpicmos0 at acpi0 > > acpibat0 at acpi0: BAT0 model "42T4969" serial 13194 type LION oem "LGC" > > acpiac0 at acpi0: AC unit online > > acpithinkpad0 at acpi0 > > "PNP0C14" at acpi0 not configured > > "PNP0C14" at acpi0 not configured > > acpivideo0 at acpi0: VID_ > > acpivout at acpivideo0 not configured > > acpivideo1 at acpi0: VID_ > > cpu0: Enhanced SpeedStep 2193 MHz: speeds: 2201, 2200, 2000, 1900, 1800, > > 1700, 1600, 1500, 1400, 1300, 1200, 1100, 1000, 900, 800 MHz > > pci0 at mainbus0 bus 0 > > pchb0 at pci0 dev 0 function 0 "Intel Core 2G Host" rev 0x09 > > inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 3000" rev 0x09 > > drm0 at inteldrm0 > > inteldrm0: msi > > inteldrm0: 1600x900, 32bpp > > wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation) > > wsdisplay0: screen 1-5 added (std, vt100 emulation) > > "Intel 6 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured > > em0 at pci0 dev 25 function 0 "Intel 82579LM" rev 0x04: msi, address > > f0:de:f1:dc:af:d1 > > ehci0 at pci0 dev 26 function 0 "Intel 6 Series USB" rev 0x04: apic 2 int 16 > > usb0 at ehci0: USB revision 2.0 > > uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev > > 2.00/1.00 addr 1 > > azalia0 at pci0 dev 27 function 0 "Intel 6 Series HD Audio" rev 0x04: msi > > azalia0: codecs: Conexant CX20590 > > audio0 at azalia0 > > ppb0 at pci0 dev 28 function 0 "Intel 6 Series PCIE" rev 0xb4: msi > > pci1 at ppb0 bus 2 > > ppb1 at pci0 dev 28 function 1 "Intel 6 Series PCIE" rev 0xb4: msi > > pci2 at ppb1 bus 3 > > iwn0 at pci2 dev 0 function 0 "Intel Centrino Advanced-N 6205" rev 0x34: > > msi, MIMO 2T2R, MoW, address 10:0b:a9:e8:b9:c4 > > ppb2 at pci0 dev 28 function 4 "Intel 6 Series PCIE" rev 0xb4: msi > > pci3 at ppb2 bus 13 > > sdhc0 at pci3 dev 0 function 0 "Ricoh 5U822 SD/MMC" rev 0x08: apic 2 int 16 > > sdhc0: SDHC 3.0, 50 MHz base clock > > sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed, dma > > ppb3 at pci0 dev 28 function 6 "Intel 6 Series PCIE" rev 0xb4: msi > > pci4 at ppb3 bus 14 > > xhci0 at pci4 dev 0 function 0 "NEC xHCI" rev 0x04: msi, xHCI 0.150 > > usb1 at xhci0: USB revision 3.0 > > uhub1 at usb1 configuration 1 interface 0 "NEC xHCI root hub" rev 3.00/1.00 > > addr 1 > > ehci1 at pci0 dev 29 function 0 "Intel 6 Series USB" rev 0x04: apic 2 int 23 > > usb2 at ehci1: USB revision 2.0 > > uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev > > 2.00/1.00 addr 1 > > pcib0 at pci0 dev 31 function 0 "Intel QM67 LPC" rev 0x04 > > ahci0 at pci0 dev 31 function 2 "Intel 6 Series AHCI" rev 0x04: msi, AHCI > > 1.3 > > ahci0: port 0: 6.0Gb/s > > ahci0: port 1: 6.0Gb/s > > scsibus1 at ahci0: 32 targets > > sd0 at scsibus1 targ 0 lun 0: <ATA, Crucial_CT525MX3, M0C> SCSI3 0/direct > > fixed naa.500a07511663156f > > sd0: 500786MB, 512 bytes/sector, 1025610768 sectors, thin > > sd1 at scsibus1 targ 1 lun 0: <ATA, KINGSTON SV300S3, 60AA> SCSI3 0/direct > > fixed naa.50026b775903a00a > > sd1: 114473MB, 512 bytes/sector, 234441648 sectors, thin > > ichiic0 at pci0 dev 31 function 3 "Intel 6 Series SMBus" rev 0x04: apic 2 > > int 18 > > iic0 at ichiic0 > > spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-10600 SO-DIMM > > spdmem1 at iic0 addr 0x51: 4GB DDR3 SDRAM PC3-10600 SO-DIMM > > spdmem2 at iic0 addr 0x52: 4GB DDR3 SDRAM PC3-10600 SO-DIMM > > spdmem3 at iic0 addr 0x53: 4GB DDR3 SDRAM PC3-10600 SO-DIMM > > isa0 at pcib0 > > isadma0 at isa0 > > pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > > pckbd0 at pckbc0 (kbd slot) > > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > > pms0 at pckbc0 (aux slot) > > wsmouse0 at pms0 mux 0 > > wsmouse1 at pms0 mux 0 > > pms0: Synaptics touchpad, firmware 7.2, 0x1c0b1 0xb40000 > > pcppi0 at isa0 port 0x61 > > spkr0 at pcppi0 > > aps0 at isa0 port 0x1600/31 > > vmm0 at mainbus0: VMX/EPT > > uhub3 at uhub0 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" > > rev 2.00/0.00 addr 2 > > ugen0 at uhub3 port 3 "UPEK Biometric Coprocessor" rev 1.01/0.02 addr 3 > > uvideo0 at uhub3 port 6 configuration 1 interface 0 "Chicony Electronics > > Co., Ltd. Integrated Camera" rev 2.00/8.54 addr 4 > > video0 at uvideo0 > > uhub4 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" > > rev 2.00/0.00 addr 2 > > uhidev0 at uhub4 port 2 configuration 1 interface 0 "Microsoft > > Microsoft\M-. Comfort Mouse 4500" rev 2.00/0.83 addr 3 > > uhidev0: iclass 3/1, 28 report ids > > ums0 at uhidev0 reportid 16: 5 buttons, Z and W dir > > wsmouse2 at ums0 mux 0 > > uhid0 at uhidev0 reportid 18: input=0, output=0, feature=1 > > uhid1 at uhidev0 reportid 19: input=1, output=0, feature=0 > > uhid2 at uhidev0 reportid 22: input=4, output=0, feature=0 > > uhid3 at uhidev0 reportid 23: input=0, output=0, feature=1 > > uhid4 at uhidev0 reportid 24: input=0, output=0, feature=1 > > uhid5 at uhidev0 reportid 28: input=1, output=0, feature=0 > > vscsi0 at root > > scsibus2 at vscsi0: 256 targets > > softraid0 at root > > scsibus3 at softraid0: 256 targets > > root on sd1a (e7e1547196603968.a) swap on sd1b dump on sd1b > > error: [drm:pid84952:intel_pipe_update_start] *ERROR* Potential atomic > > update failure on pipe A > > error: [drm:pid67751:intel_pipe_update_start] *ERROR* Potential atomic > > update failure on pipe A > > > > > > Arnoud Otten > > > > > > -- >
