Switch to using xenodm for startup.
> I was running a snapshot from Sept 26, then upgraded yesterday to 6.4
> release, and ran pkg_add -u and syspatch. Fortunately mutt runs
> without X :) .
>
> When I run "startx" I get errors like this (details in log below):
> [ 78310.256] (EE) No drivers available.
> [ 78310.256] (EE)
> Fatal server error:
> [ 78310.261] (EE) no screens found(EE)
> [ 78310.267] (EE)
>
> The dmesg output seems to include from before the upgrade and after, and
> contains some radeon errors like these 2 lines.
> error: [drm:pid0:cik_ring_test] *ERROR* radeon: ring 2 test failed
> (scratch(0x3010C)=0xCAFEDEAD)
> error: [drm:pid0:cik_sdma_ring_test] *ERROR* radeon: ring 3 test failed
> (0xCAFEDEAD)
>
> fw_update -i yields:
> Installed: vmm-firmware-1.11.0p0 uvideo-firmware-1.2p2
> radeondrm-firmware-20170119
>
> /etc/sysctl.conf contains only these lines and blank/commented ones:
> machdep.allowaperture=3 # See xf86(4)
> machdep.lidaction=0
> kern.maxfiles=20000
>
> Running as root "X -configure" just outputs the options (which include
> "-configure", apparently), and says "Unrecognized option: -configure".
>
> The dmesg output follows, and then the contents of
> ~/.local/share/xorg/Xorg.0.log, followed by the file
> /usr/X11R6/share/X11/xorg.conf.d/10-radeon.conf file, which ends this
> message.
>
> Thanks much for suggestions.
>
>
> dmesg output:
> ---------------
> OpenBSD 6.4-beta (GENERIC.MP) #327: Wed Sep 26 12:52:56 MDT 2018
> dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> real mem = 16033533952 (15290MB)
> avail mem = 15538348032 (14818MB)
> mpath0 at root
> scsibus0 at mpath0: 256 targets
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 2.8 @ 0xebf90 (49 entries)
> bios0: vendor American Megatrends Inc. version "204" date 11/20/2014
> bios0: ASUSTeK COMPUTER INC. X550ZA
> acpi0 at bios0: rev 2
> acpi0: sleep states S0 S3 S4 S5
> acpi0: tables DSDT FACP APIC FPDT ECDT MCFG MSDM HPET UEFI SSDT SSDT CRAT
> SSDT SSDT SSDT SSDT
> acpi0: wakeup devices LOM_(S4) SBAZ(S4) ECIR(S4) OHC1(S4) EHC1(S4) OHC2(S4)
> EHC2(S4) OHC3(S4) EHC3(S4) OHC4(S4) XHC0(S4) XHC1(S4) ODD8(S3) GLAN(S4)
> LID_(S5) SLPB(S4)
> acpitimer0 at acpi0: 3579545 Hz, 32 bits
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 16 (boot processor)
> cpu0: AMD A10-7400P Radeon R6, 10 Compute Cores 4C+6G, 2496.40 MHz, 15-30-01
> cpu0:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,FMA3,CX16,SSE4.1,SSE4.2,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,XOP,SKINIT,WDT,FMA4,TCE,NODEID,TBM,CPCTR,DBKP,PERFTSC,ITSC,FSGSBASE,BMI1,XSAVEOPT
> cpu0: 96KB 64b/line 3-way I-cache, 16KB 64b/line 4-way D-cache, 2MB 64b/line
> 16-way L2 cache
> cpu0: ITLB 48 4KB entries fully associative, 24 4MB entries fully associative
> cpu0: DTLB 64 4KB entries fully associative, 64 4MB entries fully associative
> cpu0: smt 0, core 0, package 0
> mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
> cpu0: apic clock running at 99MHz
> cpu0: mwait min=64, max=64, IBE
> cpu1 at mainbus0: apid 17 (application processor)
> cpu1: AMD A10-7400P Radeon R6, 10 Compute Cores 4C+6G, 2495.34 MHz, 15-30-01
> cpu1:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,FMA3,CX16,SSE4.1,SSE4.2,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,XOP,SKINIT,WDT,FMA4,TCE,NODEID,TBM,CPCTR,DBKP,PERFTSC,ITSC,FSGSBASE,BMI1,XSAVEOPT
> cpu1: 96KB 64b/line 3-way I-cache, 16KB 64b/line 4-way D-cache, 2MB 64b/line
> 16-way L2 cache
> cpu1: ITLB 48 4KB entries fully associative, 24 4MB entries fully associative
> cpu1: DTLB 64 4KB entries fully associative, 64 4MB entries fully associative
> cpu1: smt 1, core 0, package 0
> cpu2 at mainbus0: apid 18 (application processor)
> cpu2: AMD A10-7400P Radeon R6, 10 Compute Cores 4C+6G, 2495.34 MHz, 15-30-01
> cpu2:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,FMA3,CX16,SSE4.1,SSE4.2,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,XOP,SKINIT,WDT,FMA4,TCE,NODEID,TBM,CPCTR,DBKP,PERFTSC,ITSC,FSGSBASE,BMI1,XSAVEOPT
> cpu2: 96KB 64b/line 3-way I-cache, 16KB 64b/line 4-way D-cache, 2MB 64b/line
> 16-way L2 cache
> cpu2: ITLB 48 4KB entries fully associative, 24 4MB entries fully associative
> cpu2: DTLB 64 4KB entries fully associative, 64 4MB entries fully associative
> cpu2: smt 0, core 1, package 0
> cpu3 at mainbus0: apid 19 (application processor)
> cpu3: AMD A10-7400P Radeon R6, 10 Compute Cores 4C+6G, 2495.35 MHz, 15-30-01
> cpu3:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,FMA3,CX16,SSE4.1,SSE4.2,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,XOP,SKINIT,WDT,FMA4,TCE,NODEID,TBM,CPCTR,DBKP,PERFTSC,ITSC,FSGSBASE,BMI1,XSAVEOPT
> cpu3: 96KB 64b/line 3-way I-cache, 16KB 64b/line 4-way D-cache, 2MB 64b/line
> 16-way L2 cache
> cpu3: ITLB 48 4KB entries fully associative, 24 4MB entries fully associative
> cpu3: DTLB 64 4KB entries fully associative, 64 4MB entries fully associative
> cpu3: smt 1, core 1, package 0
> ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 21, 24 pins
> ioapic1 at mainbus0: apid 1 pa 0xfec01000, version 21, 32 pins
> acpiec0 at acpi0
> acpimcfg0 at acpi0
> acpimcfg0: addr 0xe0000000, bus 0-255
> acpihpet0 at acpi0: 14318180 Hz
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus -1 (PB21)
> acpiprt2 at acpi0: bus -1 (PB22)
> acpiprt3 at acpi0: bus -1 (PB31)
> acpiprt4 at acpi0: bus -1 (PB32)
> acpiprt5 at acpi0: bus -1 (PB33)
> acpiprt6 at acpi0: bus -1 (PB34)
> acpiprt7 at acpi0: bus 2 (PE20)
> acpiprt8 at acpi0: bus -1 (PE21)
> acpiprt9 at acpi0: bus 3 (PE22)
> acpiprt10 at acpi0: bus -1 (PE23)
> acpicpu0 at acpi0: C2(0@400 io@0x1771), C1(@1 halt!), PSS
> acpicpu1 at acpi0: C2(0@400 io@0x1771), C1(@1 halt!), PSS
> acpicpu2 at acpi0: C2(0@400 io@0x1771), C1(@1 halt!), PSS
> acpicpu3 at acpi0: C2(0@400 io@0x1771), C1(@1 halt!), PSS
> acpitz0 at acpi0: critical temperature is 103 degC
> acpicmos0 at acpi0
> "AMDC003" at acpi0 not configured
> acpibat0 at acpi0: BAT0 model "X550E30" serial type LIon oem "OEM"
> acpiac0 at acpi0: AC unit online
> acpibtn0 at acpi0: PWRB
> acpibtn1 at acpi0: LID_
> "ATK4001" at acpi0 not configured
> "PNP0C14" at acpi0 not configured
> acpibtn2 at acpi0: SLPB
> "PNP0C14" at acpi0 not configured
> cpu0: 2496 MHz: speeds: 2500 2300 2100 1700 1400 MHz
> pci0 at mainbus0 bus 0
> pchb0 at pci0 dev 0 function 0 "AMD AMD64 15h Root Complex" rev 0x00
> radeondrm0 at pci0 dev 1 function 0 "ATI Kaveri Radeon R6" rev 0x00
> drm0 at radeondrm0
> radeondrm0: msi
> azalia0 at pci0 dev 1 function 1 "ATI Kaveri HD Audio" rev 0x00: msi
> azalia0: no supported codecs
> pchb1 at pci0 dev 2 function 0 "AMD AMD64 15h PCIE" rev 0x00
> pchb2 at pci0 dev 3 function 0 "AMD AMD64 15h PCIE" rev 0x00
> pchb3 at pci0 dev 4 function 0 "AMD AMD64 15h PCIE" rev 0x00
> xhci0 at pci0 dev 16 function 0 "AMD Bolton xHCI" rev 0x09: msi, xHCI 1.0
> usb0 at xhci0: USB revision 3.0
> uhub0 at usb0 configuration 1 interface 0 "AMD xHCI root hub" rev 3.00/1.00
> addr 1
> ahci0 at pci0 dev 17 function 0 "AMD Hudson-2 SATA" rev 0x40: msi, AHCI 1.3
> ahci0: port 0: 6.0Gb/s
> ahci0: port 2: 1.5Gb/s
> scsibus1 at ahci0: 32 targets
> sd0 at scsibus1 targ 0 lun 0: <ATA, TOSHIBA MQ01ABD1, AX0R> SCSI3 0/direct
> fixed naa.5000039614b041b8
> sd0: 953869MB, 512 bytes/sector, 1953525168 sectors
> cd0 at scsibus1 targ 2 lun 0: <MATSHITA, DVD-RAM UJ8G6, 1.00> ATAPI 5/cdrom
> removable
> ohci0 at pci0 dev 18 function 0 "AMD Hudson-2 USB" rev 0x11: apic 0 int 18,
> version 1.0, legacy support
> ehci0 at pci0 dev 18 function 2 "AMD Hudson-2 USB2" rev 0x11: apic 0 int 17
> usb1 at ehci0: USB revision 2.0
> uhub1 at usb1 configuration 1 interface 0 "AMD EHCI root hub" rev 2.00/1.00
> addr 1
> ohci1 at pci0 dev 19 function 0 "AMD Hudson-2 USB" rev 0x11: apic 0 int 18,
> version 1.0, legacy support
> ehci1 at pci0 dev 19 function 2 "AMD Hudson-2 USB2" rev 0x11: apic 0 int 17
> usb2 at ehci1: USB revision 2.0
> uhub2 at usb2 configuration 1 interface 0 "AMD EHCI root hub" rev 2.00/1.00
> addr 1
> piixpm0 at pci0 dev 20 function 0 "AMD Hudson-2 SMBus" rev 0x16: polling
> iic0 at piixpm0
> spdmem0 at iic0 addr 0x50: 8GB DDR3 SDRAM PC3-12800 SO-DIMM
> spdmem1 at iic0 addr 0x51: 8GB DDR3 SDRAM PC3-12800 SO-DIMM
> azalia1 at pci0 dev 20 function 2 "AMD Hudson-2 HD Audio" rev 0x01: msi
> azalia1: codecs: Realtek ALC269
> audio0 at azalia1
> pcib0 at pci0 dev 20 function 3 "AMD Hudson-2 LPC" rev 0x11
> ppb0 at pci0 dev 20 function 4 "AMD Hudson-2 PCI" rev 0x40
> pci1 at ppb0 bus 1
> sdhc0 at pci0 dev 20 function 7 "AMD Hudson-2 SD Host Controller" rev 0x00:
> apic 0 int 16
> sdhc0: SDHC 2.0, 50 MHz base clock
> sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed, dma
> ppb1 at pci0 dev 21 function 0 "AMD Hudson-2 PCIE" rev 0x00
> pci2 at ppb1 bus 2
> ppb2 at pci0 dev 21 function 2 "AMD Hudson-2 PCIE" rev 0x00
> pci3 at ppb2 bus 3
> re0 at pci3 dev 0 function 0 "Realtek 8168" rev 0x0c: RTL8168G/8111G
> (0x4c00), msi, address 1c:b7:2c:22:fb:c9
> rgephy0 at re0 phy 7: RTL8251 PHY, rev. 0
> pchb4 at pci0 dev 24 function 0 "AMD AMD64 15h Link Cfg" rev 0x00
> pchb5 at pci0 dev 24 function 1 "AMD AMD64 15h Address Map" rev 0x00
> pchb6 at pci0 dev 24 function 2 "AMD AMD64 15h DRAM Cfg" rev 0x00
> pchb7 at pci0 dev 24 function 3 "AMD AMD64 15h Misc Cfg" rev 0x00
> pchb8 at pci0 dev 24 function 4 "AMD AMD64 15h CPU Power" rev 0x00
> pchb9 at pci0 dev 24 function 5 "AMD AMD64 15h Misc Cfg" rev 0x00
> usb3 at ohci0: USB revision 1.0
> uhub3 at usb3 configuration 1 interface 0 "AMD OHCI root hub" rev 1.00/1.00
> addr 1
> usb4 at ohci1: USB revision 1.0
> uhub4 at usb4 configuration 1 interface 0 "AMD OHCI root hub" rev 1.00/1.00
> addr 1
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5 irq 1 irq 12
> pckbd0 at pckbc0 (kbd slot)
> wskbd0 at pckbd0: console keyboard
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> vmm0 at mainbus0: SVM/RVI
> efifb at mainbus0 not configured
> uhub5 at uhub0 port 2 configuration 1 interface 0 "GenesysLogic USB3.0 Hub"
> rev 3.00/92.24 addr 2
> uhub6 at uhub0 port 4 configuration 1 interface 0 "GenesysLogic USB2.0 Hub"
> rev 2.10/92.24 addr 3
> uhidev0 at uhub6 port 4 configuration 1 interface 0 "vendor 0x0000 USB
> OPTICAL MOUSE" rev 1.10/1.00 addr 4
> uhidev0: iclass 3/1, 1 report id
> ums0 at uhidev0 reportid 1: 3 buttons, Z dir
> wsmouse0 at ums0 mux 0
> uvideo0 at uhub2 port 4 configuration 1 interface 0 "Chicony Electronics
> USB2.0 VGA UVC WebCam" rev 2.00/99.16 addr 2
> video0 at uvideo0
> uhidev1 at uhub3 port 1 configuration 1 interface 0 "KINESIS FREESTYLE KB800
> KB800 Kinesis Freestyle" rev 1.10/1.22 addr 2
> uhidev1: iclass 3/1
> ukbd0 at uhidev1: 8 variable keys, 6 key codes
> wskbd1 at ukbd0 mux 1
> uhidev2 at uhub3 port 1 configuration 1 interface 1 "KINESIS FREESTYLE KB800
> KB800 Kinesis Freestyle" rev 1.10/1.22 addr 2
> uhidev2: iclass 3/0, 3 report ids
> uhid0 at uhidev2 reportid 2: input=1, output=0, feature=0
> uhid1 at uhidev2 reportid 3: input=2, output=0, feature=0
> vscsi0 at root
> scsibus2 at vscsi0: 256 targets
> softraid0 at root
> scsibus3 at softraid0: 256 targets
> sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> SCSI2 0/direct fixed
> sd1: 953868MB, 512 bytes/sector, 1953523553 sectors
> root on sd1a (6759d2c493c65bb1.a) swap on sd1b dump on sd1b
> initializing kernel modesetting (KAVERI 0x1002:0x130D 0x1043:0x17FD).
> error: [drm:pid0:cik_ring_test] *ERROR* radeon: ring 2 test failed
> (scratch(0x3010C)=0xCAFEDEAD)
> error: [drm:pid0:cik_sdma_ring_test] *ERROR* radeon: ring 3 test failed
> (0xCAFEDEAD)
> drm:pid0:cik_init *ERROR* disabling GPU acceleration
> Can't enable IRQ/MSI because no handler is installed
> radeondrm0: 1366x768, 32bpp
> wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0
> wskbd1: connecting to wsdisplay0
> wsdisplay0: screen 1-5 added (std, vt100 emulation)
> ugen0 at uhub0 port 3 "SAMSUNG SAMSUNG_Android" rev 2.00/ff.ff addr 5
> chrome[76278]: pledge "rpath", syscall 5
> chrome[66944]: pledge "rpath", syscall 5
> chrome[94954]: pledge "rpath", syscall 5
> Can't enable IRQ/MSI because no handler is installed
> Can't enable IRQ/MSI because no handler is installed
> ugen0 detached
> Can't enable IRQ/MSI because no handler is installed
> Can't enable IRQ/MSI because no handler is installed
> Can't enable IRQ/MSI because no handler is installed
> Can't enable IRQ/MSI because no handler is installed
> ugen0 at uhub0 port 3 "SAMSUNG SAMSUNG_Android" rev 2.00/ff.ff addr 5
> Can't enable IRQ/MSI because no handler is installed
> Can't enable IRQ/MSI because no handler is installed
> chrome[54029]: pledge "rpath", syscall 5
> chrome[52943]: pledge "rpath", syscall 5
> ugen0 detached
> uhub0: device problem, disabling port 3
> umodem0 at uhub0 port 3 configuration 1 interface 1 "samsung
> SAMSUNG-SGH-I717" rev 2.00/4.00 addr 5
> umodem0: data interface 2, has no CM over data, has no break
> umodem0: status change notification available
> ucom0 at umodem0
> ugen0 at uhub0 port 3 configuration 1 "samsung SAMSUNG-SGH-I717" rev
> 2.00/4.00 addr 5
> ucom0 detached
> umodem0 detached
> ugen0 detached
> Can't enable IRQ/MSI because no handler is installed
> Can't enable IRQ/MSI because no handler is installed
> Can't enable IRQ/MSI because no handler is installed
> Can't enable IRQ/MSI because no handler is installed
> Can't enable IRQ/MSI because no handler is installed
> Can't enable IRQ/MSI because no handler is installed
> ugen0 at uhub0 port 3 "SAMSUNG SAMSUNG_Android" rev 2.00/ff.ff addr 5
> ugen0 detached
> ugen0 at uhub0 port 3 "SAMSUNG SAMSUNG_Android" rev 2.00/ff.ff addr 5
> Can't enable IRQ/MSI because no handler is installed
> Can't enable IRQ/MSI because no handler is installed
> ugen0 detached
> Can't enable IRQ/MSI because no handler is installed
> Can't enable IRQ/MSI because no handler is installed
> ugen0 at uhub0 port 3 "SAMSUNG SAMSUNG_Android" rev 2.00/ff.ff addr 5
> ugen0 detached
> ugen0 at uhub0 port 3 "SAMSUNG SAMSUNG_Android" rev 2.00/ff.ff addr 5
> Can't enable IRQ/MSI because no handler is installed
> Can't enable IRQ/MSI because no handler is installed
> ugen0 detached
> Can't enable IRQ/MSI because no handler is installed
> Can't enable IRQ/MSI because no handler is installed
> Can't enable IRQ/MSI because no handler is installed
> Can't enable IRQ/MSI because no handler is installed
> Can't enable IRQ/MSI because no handler is installed
> Can't enable IRQ/MSI because no handler is installed
> uhub0: device problem, disabling port 3
> uhub0: device problem, disabling port 3
> uhub0: port error, restarting port 3
> uhub0: device problem, disabling port 3
> umodem0 at uhub0 port 3 configuration 1 interface 1 "samsung
> SAMSUNG-SGH-I717" rev 2.00/4.00 addr 5
> umodem0: data interface 2, has no CM over data, has no break
> umodem0: status change notification available
> ucom0 at umodem0
> ugen0 at uhub0 port 3 configuration 1 "samsung SAMSUNG-SGH-I717" rev
> 2.00/4.00 addr 5
> ucom0 detached
> umodem0 detached
> ugen0 detached
> umodem0 at uhub0 port 3 configuration 1 interface 1 "samsung
> SAMSUNG-SGH-I717" rev 2.00/4.00 addr 5
> umodem0: data interface 2, has no CM over data, has no break
> umodem0: status change notification available
> ucom0 at umodem0
> ugen0 at uhub0 port 3 configuration 1 "samsung SAMSUNG-SGH-I717" rev
> 2.00/4.00 addr 5
> ucom0 detached
> umodem0 detached
> ugen0 detached
> usbd_free_xfer: xfer=0xffffff043e65f4b0 not free
> Can't enable IRQ/MSI because no handler is installed
> Can't enable IRQ/MSI because no handler is installed
> Can't enable IRQ/MSI because no handler is installed
> Can't enable IRQ/MSI because no handler is installed
> Can't enable IRQ/MSI because no handler is installed
> Can't enable IRQ/MSI because no handler is installed
> Can't enable IRQ/MSI because no handler is installed
> Can't enable IRQ/MSI because no handler is installed
> Can't enable IRQ/MSI because no handler is installed
> Can't enable IRQ/MSI because no handler is installed
> Can't enable IRQ/MSI because no handler is installed
> Can't enable IRQ/MSI because no handler is installed
> Can't enable IRQ/MSI because no handler is installed
> Can't enable IRQ/MSI because no handler is installed
> Can't enable IRQ/MSI because no handler is installed
> Can't enable IRQ/MSI because no handler is installed
> Can't enable IRQ/MSI because no handler is installed
> Can't enable IRQ/MSI because no handler is installed
> Can't enable IRQ/MSI because no handler is installed
> Can't enable IRQ/MSI because no handler is installed
> Can't enable IRQ/MSI because no handler is installed
> Can't enable IRQ/MSI because no handler is installed
> chrome[81625]: pledge "rpath", syscall 5
> Can't enable IRQ/MSI because no handler is installed
> Can't enable IRQ/MSI because no handler is installed
> Can't enable IRQ/MSI because no handler is installed
> Can't enable IRQ/MSI because no handler is installed
> Can't enable IRQ/MSI because no handler is installed
> Can't enable IRQ/MSI because no handler is installed
> Can't enable IRQ/MSI because no handler is installed
> Can't enable IRQ/MSI because no handler is installed
> Can't enable IRQ/MSI because no handler is installed
> Can't enable IRQ/MSI because no handler is installed
> Can't enable IRQ/MSI because no handler is installed
> Can't enable IRQ/MSI because no handler is installed
> Can't enable IRQ/MSI because no handler is installed
> Can't enable IRQ/MSI because no handler is installed
> Can't enable IRQ/MSI because no handler is installed
> Can't enable IRQ/MSI because no handler is installed
> Can't enable IRQ/MSI because no handler is installed
> Can't enable IRQ/MSI because no handler is installed
> Can't enable IRQ/MSI because no handler is installed
> Can't enable IRQ/MSI because no handler is installed
> Can't enable IRQ/MSI because no handler is installed
> Can't enable IRQ/MSI because no handler is installed
> Can't enable IRQ/MSI because no handler is installed
> Can't enable IRQ/MSI because no handler is installed
> Can't enable IRQ/MSI because no handler is installed
> Can't enable IRQ/MSI because no handler is installed
> Can't enable IRQ/MSI because no handler is installed
> Can't enable IRQ/MSI because no handler is installed
> Can't enable IRQ/MSI because no handler is installed
> Can't enable IRQ/MSI because no handler is installed
> syncing disks... done
> reb
> OpenBSD 6.4 (RAMDISK_CD) #348: Thu Oct 11 13:36:16 MDT 2018
> dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
> real mem = 16033533952 (15290MB)
> avail mem = 15543820288 (14823MB)
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 2.8 @ 0xebf90 (49 entries)
> bios0: vendor American Megatrends Inc. version "204" date 11/20/2014
> bios0: ASUSTeK COMPUTER INC. X550ZA
> acpi0 at bios0: rev 2
> acpi0: tables DSDT FACP APIC FPDT ECDT MCFG MSDM HPET UEFI SSDT SSDT CRAT
> SSDT SSDT SSDT SSDT
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 16 (boot processor)
> cpu0: AMD A10-7400P Radeon R6, 10 Compute Cores 4C+6G, 2495.64 MHz, 15-30-01
> cpu0:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,FMA3,CX16,SSE4.1,SSE4.2,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,XOP,SKINIT,WDT,FMA4,TCE,NODEID,TBM,CPCTR,DBKP,PERFTSC,ITSC,FSGSBASE,BMI1,XSAVEOPT
> cpu0: 96KB 64b/line 3-way I-cache, 16KB 64b/line 4-way D-cache, 2MB 64b/line
> 16-way L2 cache
> cpu0: ITLB 48 4KB entries fully associative, 24 4MB entries fully associative
> cpu0: DTLB 64 4KB entries fully associative, 64 4MB entries fully associative
> cpu0: apic clock running at 99MHz
> Cpu0: mwait min=64, max=64, IBE
> cpu at mainbus0: not configured
> cpu at mainbus0: not configured
> cpu at mainbus0: not configured
> ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 21, 24 pins
> ioapic1 at mainbus0: apid 1 pa 0xfec01000, version 21, 32 pins
> acpiec0 at acpi0
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus -1 (PB21)
> acpiprt2 at acpi0: bus -1 (PB22)
> acpiprt3 at acpi0: bus -1 (PB31)
> acpiprt4 at acpi0: bus -1 (PB32)
> acpiprt5 at acpi0: bus -1 (PB33)
> acpiprt6 at acpi0: bus -1 (PB34)
> acpiprt7 at acpi0: bus 2 (PE20)
> acpiprt8 at acpi0: bus -1 (PE21)
> acpiprt9 at acpi0: bus 3 (PE22)
> acpiprt10 at acpi0: bus -1 (PE23)
> acpicpu at acpi0 not configured
> acpitz at acpi0 not configured
> "PNP0B00" at acpi0 not configured
> "AMDC003" at acpi0 not configured
> "PNP0C0A" at acpi0 not configured
> "ACPI0003" at acpi0 not configured
> "PNP0C0C" at acpi0 not configured
> "PNP0C0D" at acpi0 not configured
> "ATK4001" at acpi0 not configured
> "PNP0C14" at acpi0 not configured
> "PNP0C0E" at acpi0 not configured
> "PNP0C14" at acpi0 not configured
> pci0 at mainbus0 bus 0
> pchb0 at pci0 dev 0 function 0 "AMD AMD64 15h Root Complex" rev 0x00
> "ATI Kaveri Radeon R6" rev 0x00 at pci0 dev 1 function 0 not configured
> "ATI Kaveri HD Audio" rev 0x00 at pci0 dev 1 function 1 not configured
> pchb1 at pci0 dev 2 function 0 "AMD AMD64 15h PCIE" rev 0x00
> pchb2 at pci0 dev 3 function 0 "AMD AMD64 15h PCIE" rev 0x00
> pchb3 at pci0 dev 4 function 0 "AMD AMD64 15h PCIE" rev 0x00
> xhci0 at pci0 dev 16 function 0 "AMD Bolton xHCI" rev 0x09: msi, xHCI 1.0
> usb0 at xhci0: USB revision 3.0
> uhub0 at usb0 configuration 1 interface 0 "AMD xHCI root hub" rev 3.00/1.00
> addr 1
> ahci0 at pci0 dev 17 function 0 "AMD Hudson-2 SATA" rev 0x40: msi, AHCI 1.3
> ahci0: port 0: 6.0Gb/s
> ahci0: port 2: 1.5Gb/s
> scsibus0 at ahci0: 32 targets
> sd0 at scsibus0 targ 0 lun 0: <ATA, TOSHIBA MQ01ABD1, AX0R> SCSI3 0/direct
> fixed naa.5000039614b041b8
> sd0: 953869MB, 512 bytes/sector, 1953525168 sectors
> cd0 at scsibus0 targ 2 lun 0: <MATSHITA, DVD-RAM UJ8G6, 1.00> ATAPI 5/cdrom
> removable
> ohci0 at pci0 dev 18 function 0 "AMD Hudson-2 USB" rev 0x11: apic 0 int 18,
> version 1.0, legacy support
> ehci0 at pci0 dev 18 function 2 "AMD Hudson-2 USB2" rev 0x11: apic 0 int 17
> usb1 at ehci0: USB revision 2.0
> uhub1 at usb1 configuration 1 interface 0 "AMD EHCI root hub" rev 2.00/1.00
> addr 1
> ohci1 at pci0 dev 19 function 0 "AMD Hudson-2 USB" rev 0x11: apic 0 int 18,
> version 1.0, legacy support
> ehci1 at pci0 dev 19 function 2 "AMD Hudson-2 USB2" rev 0x11: apic 0 int 17
> usb2 at ehci1: USB revision 2.0
> uhub2 at usb2 configuration 1 interface 0 "AMD EHCI root hub" rev 2.00/1.00
> addr 1
> "AMD Hudson-2 SMBus" rev 0x16 at pci0 dev 20 function 0 not configured
> "AMD Hudson-2 HD Audio" rev 0x01 at pci0 dev 20 function 2 not configured
> "AMD Hudson-2 LPC" rev 0x11 at pci0 dev 20 function 3 not configured
> ppb0 at pci0 dev 20 function 4 "AMD Hudson-2 PCI" rev 0x40
> pci1 at ppb0 bus 1
> sdhc0 at pci0 dev 20 function 7 "AMD Hudson-2 SD Host Controller" rev 0x00:
> apic 0 int 16
> sdhc0: SDHC 2.0, 50 MHz base clock
> sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed, dma
> ppb1 at pci0 dev 21 function 0 "AMD Hudson-2 PCIE" rev 0x00
> pci2 at ppb1 bus 2
> ppb2 at pci0 dev 21 function 2 "AMD Hudson-2 PCIE" rev 0x00
> pci3 at ppb2 bus 3
> re0 at pci3 dev 0 function 0 "Realtek 8168" rev 0x0c: RTL8168G/8111G
> (0x4c00), msi, address 1c:b7:2c:22:fb:c9
> rgephy0 at re0 phy 7: RTL8251 PHY, rev. 0
> pchb4 at pci0 dev 24 function 0 "AMD AMD64 15h Link Cfg" rev 0x00
> pchb5 at pci0 dev 24 function 1 "AMD AMD64 15h Address Map" rev 0x00
> pchb6 at pci0 dev 24 function 2 "AMD AMD64 15h DRAM Cfg" rev 0x00
> pchb7 at pci0 dev 24 function 3 "AMD AMD64 15h Misc Cfg" rev 0x00
> pchb8 at pci0 dev 24 function 4 "AMD AMD64 15h CPU Power" rev 0x00
> pchb9 at pci0 dev 24 function 5 "AMD AMD64 15h Misc Cfg" rev 0x00
> usb3 at ohci0: USB revision 1.0
> uhub3 at usb3 configuration 1 interface 0 "AMD OHCI root hub" rev 1.00/1.00
> addr 1
> usb4 at ohci1: USB revision 1.0
> uhub4 at usb4 configuration 1 interface 0 "AMD OHCI root hub" rev 1.00/1.00
> addr 1
> isa0 at mainbus0
> pckbc0 at isa0 port 0x60/5 irq 1 irq 12
> pckbd0 at pckbc0 (kbd slot)
> wskbd0 at pckbd0: console keyboard
> efifb0 at mainbus0: 1366x768, 32bpp
> wsdisplay0 at efifb0 mux 1: console (std, vt100 emulation), using wskbd0
> uhub5 at uhub0 port 2 configuration 1 interface 0 "GenesysLogic USB3.0 Hub"
> rev 3.00/92.24 addr 2
> "SAMSUNG SAMSUNG_Android" rev 2.00/ff.ff addr 3 at uhub0 port 3 not configured
> uhub6 at uhub0 port 4 configuration 1 interface 0 "GenesysLogic USB2.0 Hub"
> rev 2.10/92.24 addr 4
> uhidev0 at uhub6 port 4 configuration 1 interface 0 "vendor 0x0000 USB
> OPTICAL MOUSE" rev 1.10/1.00 addr 5
> uhidev0: iclass 3/1, 1 report id
> uhid at uhidev0 reportid 1 not configured
> "vendor 0x04f2 USB2.0 VGA UVC WebCam" rev 2.00/99.16 addr 2 at uhub2 port 4
> not configured
> uhidev1 at uhub3 port 1 configuration 1 interface 0 "KINESIS FREESTYLE KB800
> KB800 Kinesis Freestyle" rev 1.10/1.22 addr 2
> uhidev1: iclass 3/1
> ukbd0 at uhidev1
> wskbd1 at ukbd0 mux 1
> wskbd1: connecting to wsdisplay0
> uhidev2 at uhub3 port 1 configuration 1 interface 1 "KINESIS FREESTYLE KB800
> KB800 Kinesis Freestyle" rev 1.10/1.22 addr 2
> uhidev2: iclass 3/0, 3 report ids
> uhid at uhidev2 reportid 2 not configured
> uhid at uhidev2 reportid 3 not configured
> softraid0 at root
> scsibus1 at softraid0: 256 targets
> sd1 at scsibus1 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> SCSI2 0/direct fixed
> sd1: 953868MB, 512 bytes/sector, 1953523553 sectors
> root on rd0a swap on rd0b dump on rd0b
> syncing disks...
> OpenBSD 6.4 (GENERIC.MP) #364: Thu Oct 11 13:30:23 MDT 2018
> dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> real mem = 16033533952 (15290MB)
> avail mem = 15538327552 (14818MB)
> mpath0 at root
> scsibus0 at mpath0: 256 targets
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 2.8 @ 0xebf90 (49 entries)
> bios0: vendor American Megatrends Inc. version "204" date 11/20/2014
> bios0: ASUSTeK COMPUTER INC. X550ZA
> acpi0 at bios0: rev 2
> acpi0: sleep states S0 S3 S4 S5
> acpi0: tables DSDT FACP APIC FPDT ECDT MCFG MSDM HPET UEFI SSDT SSDT CRAT
> SSDT SSDT SSDT SSDT
> acpi0: wakeup devices LOM_(S4) SBAZ(S4) ECIR(S4) OHC1(S4) EHC1(S4) OHC2(S4)
> EHC2(S4) OHC3(S4) EHC3(S4) OHC4(S4) XHC0(S4) XHC1(S4) ODD8(S3) GLAN(S4)
> LID_(S5) SLPB(S4)
> acpitimer0 at acpi0: 3579545 Hz, 32 bits
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 16 (boot processor)
> cpu0: AMD A10-7400P Radeon R6, 10 Compute Cores 4C+6G, 2495.68 MHz, 15-30-01
> cpu0:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,FMA3,CX16,SSE4.1,SSE4.2,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,XOP,SKINIT,WDT,FMA4,TCE,NODEID,TBM,CPCTR,DBKP,PERFTSC,ITSC,FSGSBASE,BMI1,XSAVEOPT
> cpu0: 96KB 64b/line 3-way I-cache, 16KB 64b/line 4-way D-cache, 2MB 64b/line
> 16-way L2 cache
> cpu0: ITLB 48 4KB entries fully associative, 24 4MB entries fully associative
> cpu0: DTLB 64 4KB entries fully associative, 64 4MB entries fully associative
> cpu0: smt 0, core 0, package 0
> mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
> cpu0: apic clock running at 99MHz
> cpu0: mwait min=64, max=64, IBE
> cpu1 at mainbus0: apid 17 (application processor)
> cpu1: AMD A10-7400P Radeon R6, 10 Compute Cores 4C+6G, 2495.34 MHz, 15-30-01
> cpu1:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,FMA3,CX16,SSE4.1,SSE4.2,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,XOP,SKINIT,WDT,FMA4,TCE,NODEID,TBM,CPCTR,DBKP,PERFTSC,ITSC,FSGSBASE,BMI1,XSAVEOPT
> cpu1: 96KB 64b/line 3-way I-cache, 16KB 64b/line 4-way D-cache, 2MB 64b/line
> 16-way L2 cache
> cpu1: ITLB 48 4KB entries fully associative, 24 4MB entries fully associative
> cpu1: DTLB 64 4KB entries fully associative, 64 4MB entries fully associative
> cpu1: smt 1, core 0, package 0
> cpu2 at mainbus0: apid 18 (application processor)
> cpu2: AMD A10-7400P Radeon R6, 10 Compute Cores 4C+6G, 2495.34 MHz, 15-30-01
> cpu2:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,FMA3,CX16,SSE4.1,SSE4.2,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,XOP,SKINIT,WDT,FMA4,TCE,NODEID,TBM,CPCTR,DBKP,PERFTSC,ITSC,FSGSBASE,BMI1,XSAVEOPT
> cpu2: 96KB 64b/line 3-way I-cache, 16KB 64b/line 4-way D-cache, 2MB 64b/line
> 16-way L2 cache
> cpu2: ITLB 48 4KB entries fully associative, 24 4MB entries fully associative
> cpu2: DTLB 64 4KB entries fully associative, 64 4MB entries fully associative
> cpu2: smt 0, core 1, package 0
> cpu3 at mainbus0: apid 19 (application processor)
> cpu3: AMD A10-7400P Radeon R6, 10 Compute Cores 4C+6G, 2495.34 MHz, 15-30-01
> cpu3:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,FMA3,CX16,SSE4.1,SSE4.2,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,XOP,SKINIT,WDT,FMA4,TCE,NODEID,TBM,CPCTR,DBKP,PERFTSC,ITSC,FSGSBASE,BMI1,XSAVEOPT
> cpu3: 96KB 64b/line 3-way I-cache, 16KB 64b/line 4-way D-cache, 2MB 64b/line
> 16-way L2 cache
> cpu3: ITLB 48 4KB entries fully associative, 24 4MB entries fully associative
> cpu3: DTLB 64 4KB entries fully associative, 64 4MB entries fully associative
> cpu3: smt 1, core 1, package 0
> ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 21, 24 pins
> ioapic1 at mainbus0: apid 1 pa 0xfec01000, version 21, 32 pins
> acpiec0 at acpi0
> acpimcfg0 at acpi0
> acpimcfg0: addr 0xe0000000, bus 0-255
> acpihpet0 at acpi0: 14318180 Hz
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus -1 (PB21)
> acpiprt2 at acpi0: bus -1 (PB22)
> acpiprt3 at acpi0: bus -1 (PB31)
> acpiprt4 at acpi0: bus -1 (PB32)
> acpiprt5 at acpi0: bus -1 (PB33)
> acpiprt6 at acpi0: bus -1 (PB34)
> acpiprt7 at acpi0: bus 2 (PE20)
> acpiprt8 at acpi0: bus -1 (PE21)
> acpiprt9 at acpi0: bus 3 (PE22)
> acpiprt10 at acpi0: bus -1 (PE23)
> acpicpu0 at acpi0: C2(0@400 io@0x1771), C1(@1 halt!), PSS
> acpicpu1 at acpi0: C2(0@400 io@0x1771), C1(@1 halt!), PSS
> acpicpu2 at acpi0: C2(0@400 io@0x1771), C1(@1 halt!), PSS
> acpicpu3 at acpi0: C2(0@400 io@0x1771), C1(@1 halt!), PSS
> acpitz0 at acpi0: critical temperature is 103 degC
> acpicmos0 at acpi0
> "AMDC003" at acpi0 not configured
> acpibat0 at acpi0: BAT0 model "X550E30" serial type LIon oem "OEM"
> acpiac0 at acpi0: AC unit online
> acpibtn0 at acpi0: PWRB
> acpibtn1 at acpi0: LID_
> "ATK4001" at acpi0 not configured
> "PNP0C14" at acpi0 not configured
> acpibtn2 at acpi0: SLPB
> "PNP0C14" at acpi0 not configured
> cpu0: 2495 MHz: speeds: 2500 2300 2100 1700 1400 MHz
> pci0 at mainbus0 bus 0
> pchb0 at pci0 dev 0 function 0 "AMD AMD64 15h Root Complex" rev 0x00
> radeondrm0 at pci0 dev 1 function 0 "ATI Kaveri Radeon R6" rev 0x00
> drm0 at radeondrm0
> radeondrm0: msi
> azalia0 at pci0 dev 1 function 1 "ATI Kaveri HD Audio" rev 0x00: msi
> azalia0: no supported codecs
> pchb1 at pci0 dev 2 function 0 "AMD AMD64 15h PCIE" rev 0x00
> pchb2 at pci0 dev 3 function 0 "AMD AMD64 15h PCIE" rev 0x00
> pchb3 at pci0 dev 4 function 0 "AMD AMD64 15h PCIE" rev 0x00
> xhci0 at pci0 dev 16 function 0 "AMD Bolton xHCI" rev 0x09: msi, xHCI 1.0
> usb0 at xhci0: USB revision 3.0
> uhub0 at usb0 configuration 1 interface 0 "AMD xHCI root hub" rev 3.00/1.00
> addr 1
> ahci0 at pci0 dev 17 function 0 "AMD Hudson-2 SATA" rev 0x40: msi, AHCI 1.3
> ahci0: port 0: 6.0Gb/s
> ahci0: port 2: 1.5Gb/s
> scsibus1 at ahci0: 32 targets
> sd0 at scsibus1 targ 0 lun 0: <ATA, TOSHIBA MQ01ABD1, AX0R> SCSI3 0/direct
> fixed naa.5000039614b041b8
> sd0: 953869MB, 512 bytes/sector, 1953525168 sectors
> cd0 at scsibus1 targ 2 lun 0: <MATSHITA, DVD-RAM UJ8G6, 1.00> ATAPI 5/cdrom
> removable
> ohci0 at pci0 dev 18 function 0 "AMD Hudson-2 USB" rev 0x11: apic 0 int 18,
> version 1.0, legacy support
> ehci0 at pci0 dev 18 function 2 "AMD Hudson-2 USB2" rev 0x11: apic 0 int 17
> usb1 at ehci0: USB revision 2.0
> uhub1 at usb1 configuration 1 interface 0 "AMD EHCI root hub" rev 2.00/1.00
> addr 1
> ohci1 at pci0 dev 19 function 0 "AMD Hudson-2 USB" rev 0x11: apic 0 int 18,
> version 1.0, legacy support
> ehci1 at pci0 dev 19 function 2 "AMD Hudson-2 USB2" rev 0x11: apic 0 int 17
> usb2 at ehci1: USB revision 2.0
> uhub2 at usb2 configuration 1 interface 0 "AMD EHCI root hub" rev 2.00/1.00
> addr 1
> piixpm0 at pci0 dev 20 function 0 "AMD Hudson-2 SMBus" rev 0x16: polling
> iic0 at piixpm0
> spdmem0 at iic0 addr 0x50: 8GB DDR3 SDRAM PC3-12800 SO-DIMM
> spdmem1 at iic0 addr 0x51: 8GB DDR3 SDRAM PC3-12800 SO-DIMM
> azalia1 at pci0 dev 20 function 2 "AMD Hudson-2 HD Audio" rev 0x01: msi
> azalia1: codecs: Realtek ALC269
> audio0 at azalia1
> pcib0 at pci0 dev 20 function 3 "AMD Hudson-2 LPC" rev 0x11
> ppb0 at pci0 dev 20 function 4 "AMD Hudson-2 PCI" rev 0x40
> pci1 at ppb0 bus 1
> sdhc0 at pci0 dev 20 function 7 "AMD Hudson-2 SD Host Controller" rev 0x00:
> apic 0 int 16
> sdhc0: SDHC 2.0, 50 MHz base clock
> sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed, dma
> ppb1 at pci0 dev 21 function 0 "AMD Hudson-2 PCIE" rev 0x00
> pci2 at ppb1 bus 2
> ppb2 at pci0 dev 21 function 2 "AMD Hudson-2 PCIE" rev 0x00
> pci3 at ppb2 bus 3
> re0 at pci3 dev 0 function 0 "Realtek 8168" rev 0x0c: RTL8168G/8111G
> (0x4c00), msi, address 1c:b7:2c:22:fb:c9
> rgephy0 at re0 phy 7: RTL8251 PHY, rev. 0
> pchb4 at pci0 dev 24 function 0 "AMD AMD64 15h Link Cfg" rev 0x00
> pchb5 at pci0 dev 24 function 1 "AMD AMD64 15h Address Map" rev 0x00
> pchb6 at pci0 dev 24 function 2 "AMD AMD64 15h DRAM Cfg" rev 0x00
> pchb7 at pci0 dev 24 function 3 "AMD AMD64 15h Misc Cfg" rev 0x00
> pchb8 at pci0 dev 24 function 4 "AMD AMD64 15h CPU Power" rev 0x00
> pchb9 at pci0 dev 24 function 5 "AMD AMD64 15h Misc Cfg" rev 0x00
> usb3 at ohci0: USB revision 1.0
> uhub3 at usb3 configuration 1 interface 0 "AMD OHCI root hub" rev 1.00/1.00
> addr 1
> usb4 at ohci1: USB revision 1.0
> uhub4 at usb4 configuration 1 interface 0 "AMD OHCI root hub" rev 1.00/1.00
> addr 1
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5 irq 1 irq 12
> pckbd0 at pckbc0 (kbd slot)
> wskbd0 at pckbd0: console keyboard
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> vmm0 at mainbus0: SVM/RVI
> efifb at mainbus0 not configured
> uhub5 at uhub0 port 2 configuration 1 interface 0 "GenesysLogic USB3.0 Hub"
> rev 3.00/92.24 addr 2
> ugen0 at uhub0 port 3 "SAMSUNG SAMSUNG_Android" rev 2.00/ff.ff addr 3
> uhub6 at uhub0 port 4 configuration 1 interface 0 "GenesysLogic USB2.0 Hub"
> rev 2.10/92.24 addr 4
> uhidev0 at uhub6 port 4 configuration 1 interface 0 "vendor 0x0000 USB
> OPTICAL MOUSE" rev 1.10/1.00 addr 5
> uhidev0: iclass 3/1, 1 report id
> ums0 at uhidev0 reportid 1: 3 buttons, Z dir
> wsmouse0 at ums0 mux 0
> uvideo0 at uhub2 port 4 configuration 1 interface 0 "Chicony Electronics
> USB2.0 VGA UVC WebCam" rev 2.00/99.16 addr 2
> video0 at uvideo0
> uhidev1 at uhub3 port 1 configuration 1 interface 0 "KINESIS FREESTYLE KB800
> KB800 Kinesis Freestyle" rev 1.10/1.22 addr 2
> uhidev1: iclass 3/1
> ukbd0 at uhidev1: 8 variable keys, 6 key codes
> wskbd1 at ukbd0 mux 1
> uhidev2 at uhub3 port 1 configuration 1 interface 1 "KINESIS FREESTYLE KB800
> KB800 Kinesis Freestyle" rev 1.10/1.22 addr 2
> uhidev2: iclass 3/0, 3 report ids
> uhid0 at uhidev2 reportid 2: input=1, output=0, feature=0
> uhid1 at uhidev2 reportid 3: input=2, output=0, feature=0
> vscsi0 at root
> scsibus2 at vscsi0: 256 targets
> softraid0 at root
> scsibus3 at softraid0: 256 targets
> sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> SCSI2 0/direct fixed
> sd1: 953868MB, 512 bytes/sector, 1953523553 sectors
> root on sd1a (6759d2c493c65bb1.a) swap on sd1b dump on sd1b
> initializing kernel modesetting (KAVERI 0x1002:0x130D 0x1043:0x17FD).
> error: [drm:pid0:cik_ring_test] *ERROR* radeon: ring 2 test failed
> (scratch(0x3010C)=0xCAFEDEAD)
> error: [drm:pid0:cik_sdma_ring_test] *ERROR* radeon: ring 3 test failed
> (0xCAFEDEAD)
> drm:pid0:cik_init *ERROR* disabling GPU acceleration
> Can't enable IRQ/MSI because no handler is installed
> radeondrm0: 1366x768, 32bpp
> wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0
> wskbd1: connecting to wsdisplay0
> wsdisplay0: screen 1-5 added (std, vt100 emulation)
> ugen0 detached
> syncing disks... done
> reb
> OpenBSD 6.4 (GENERIC.MP) #364: Thu Oct 11 13:30:23 MDT 2018
> dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> real mem = 16033533952 (15290MB)
> avail mem = 15538343936 (14818MB)
> mpath0 at root
> scsibus0 at mpath0: 256 targets
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 2.8 @ 0xebf90 (49 entries)
> bios0: vendor American Megatrends Inc. version "204" date 11/20/2014
> bios0: ASUSTeK COMPUTER INC. X550ZA
> acpi0 at bios0: rev 2
> acpi0: sleep states S0 S3 S4 S5
> acpi0: tables DSDT FACP APIC FPDT ECDT MCFG MSDM HPET UEFI SSDT SSDT CRAT
> SSDT SSDT SSDT SSDT
> acpi0: wakeup devices LOM_(S4) SBAZ(S4) ECIR(S4) OHC1(S4) EHC1(S4) OHC2(S4)
> EHC2(S4) OHC3(S4) EHC3(S4) OHC4(S4) XHC0(S4) XHC1(S4) ODD8(S3) GLAN(S4)
> LID_(S5) SLPB(S4)
> acpitimer0 at acpi0: 3579545 Hz, 32 bits
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 16 (boot processor)
> cpu0: AMD A10-7400P Radeon R6, 10 Compute Cores 4C+6G, 2495.67 MHz, 15-30-01
> cpu0:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,FMA3,CX16,SSE4.1,SSE4.2,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,XOP,SKINIT,WDT,FMA4,TCE,NODEID,TBM,CPCTR,DBKP,PERFTSC,ITSC,FSGSBASE,BMI1,XSAVEOPT
> cpu0: 96KB 64b/line 3-way I-cache, 16KB 64b/line 4-way D-cache, 2MB 64b/line
> 16-way L2 cache
> cpu0: ITLB 48 4KB entries fully associative, 24 4MB entries fully associative
> cpu0: DTLB 64 4KB entries fully associative, 64 4MB entries fully associative
> cpu0: smt 0, core 0, package 0
> mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
> cpu0: apic clock running at 99MHz
> cpu0: mwait min=64, max=64, IBE
> cpu1 at mainbus0: apid 17 (application processor)
> cpu1: AMD A10-7400P Radeon R6, 10 Compute Cores 4C+6G, 2495.34 MHz, 15-30-01
> cpu1:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,FMA3,CX16,SSE4.1,SSE4.2,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,XOP,SKINIT,WDT,FMA4,TCE,NODEID,TBM,CPCTR,DBKP,PERFTSC,ITSC,FSGSBASE,BMI1,XSAVEOPT
> cpu1: 96KB 64b/line 3-way I-cache, 16KB 64b/line 4-way D-cache, 2MB 64b/line
> 16-way L2 cache
> cpu1: ITLB 48 4KB entries fully associative, 24 4MB entries fully associative
> cpu1: DTLB 64 4KB entries fully associative, 64 4MB entries fully associative
> cpu1: smt 1, core 0, package 0
> cpu2 at mainbus0: apid 18 (application processor)
> cpu2: AMD A10-7400P Radeon R6, 10 Compute Cores 4C+6G, 2495.34 MHz, 15-30-01
> cpu2:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,FMA3,CX16,SSE4.1,SSE4.2,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,XOP,SKINIT,WDT,FMA4,TCE,NODEID,TBM,CPCTR,DBKP,PERFTSC,ITSC,FSGSBASE,BMI1,XSAVEOPT
> cpu2: 96KB 64b/line 3-way I-cache, 16KB 64b/line 4-way D-cache, 2MB 64b/line
> 16-way L2 cache
> cpu2: ITLB 48 4KB entries fully associative, 24 4MB entries fully associative
> cpu2: DTLB 64 4KB entries fully associative, 64 4MB entries fully associative
> cpu2: smt 0, core 1, package 0
> cpu3 at mainbus0: apid 19 (application processor)
> cpu3: AMD A10-7400P Radeon R6, 10 Compute Cores 4C+6G, 2495.34 MHz, 15-30-01
> cpu3:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,FMA3,CX16,SSE4.1,SSE4.2,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,XOP,SKINIT,WDT,FMA4,TCE,NODEID,TBM,CPCTR,DBKP,PERFTSC,ITSC,FSGSBASE,BMI1,XSAVEOPT
> cpu3: 96KB 64b/line 3-way I-cache, 16KB 64b/line 4-way D-cache, 2MB 64b/line
> 16-way L2 cache
> cpu3: ITLB 48 4KB entries fully associative, 24 4MB entries fully associative
> cpu3: DTLB 64 4KB entries fully associative, 64 4MB entries fully associative
> cpu3: smt 1, core 1, package 0
> ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 21, 24 pins
> ioapic1 at mainbus0: apid 1 pa 0xfec01000, version 21, 32 pins
> acpiec0 at acpi0
> acpimcfg0 at acpi0
> acpimcfg0: addr 0xe0000000, bus 0-255
> acpihpet0 at acpi0: 14318180 Hz
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus -1 (PB21)
> acpiprt2 at acpi0: bus -1 (PB22)
> acpiprt3 at acpi0: bus -1 (PB31)
> acpiprt4 at acpi0: bus -1 (PB32)
> acpiprt5 at acpi0: bus -1 (PB33)
> acpiprt6 at acpi0: bus -1 (PB34)
> acpiprt7 at acpi0: bus 2 (PE20)
> acpiprt8 at acpi0: bus -1 (PE21)
> acpiprt9 at acpi0: bus 3 (PE22)
> acpiprt10 at acpi0: bus -1 (PE23)
> acpicpu0 at acpi0: C2(0@400 io@0x1771), C1(@1 halt!), PSS
> acpicpu1 at acpi0: C2(0@400 io@0x1771), C1(@1 halt!), PSS
> acpicpu2 at acpi0: C2(0@400 io@0x1771), C1(@1 halt!), PSS
> acpicpu3 at acpi0: C2(0@400 io@0x1771), C1(@1 halt!), PSS
> acpitz0 at acpi0: critical temperature is 103 degC
> acpicmos0 at acpi0
> "AMDC003" at acpi0 not configured
> acpibat0 at acpi0: BAT0 model "X550E30" serial type LIon oem "OEM"
> acpiac0 at acpi0: AC unit online
> acpibtn0 at acpi0: PWRB
> acpibtn1 at acpi0: LID_
> "ATK4001" at acpi0 not configured
> "PNP0C14" at acpi0 not configured
> acpibtn2 at acpi0: SLPB
> "PNP0C14" at acpi0 not configured
> cpu0: 2495 MHz: speeds: 2500 2300 2100 1700 1400 MHz
> pci0 at mainbus0 bus 0
> pchb0 at pci0 dev 0 function 0 "AMD AMD64 15h Root Complex" rev 0x00
> radeondrm0 at pci0 dev 1 function 0 "ATI Kaveri Radeon R6" rev 0x00
> drm0 at radeondrm0
> radeondrm0: msi
> azalia0 at pci0 dev 1 function 1 "ATI Kaveri HD Audio" rev 0x00: msi
> azalia0: no supported codecs
> pchb1 at pci0 dev 2 function 0 "AMD AMD64 15h PCIE" rev 0x00
> pchb2 at pci0 dev 3 function 0 "AMD AMD64 15h PCIE" rev 0x00
> pchb3 at pci0 dev 4 function 0 "AMD AMD64 15h PCIE" rev 0x00
> xhci0 at pci0 dev 16 function 0 "AMD Bolton xHCI" rev 0x09: msi, xHCI 1.0
> usb0 at xhci0: USB revision 3.0
> uhub0 at usb0 configuration 1 interface 0 "AMD xHCI root hub" rev 3.00/1.00
> addr 1
> ahci0 at pci0 dev 17 function 0 "AMD Hudson-2 SATA" rev 0x40: msi, AHCI 1.3
> ahci0: port 0: 6.0Gb/s
> ahci0: port 2: 1.5Gb/s
> scsibus1 at ahci0: 32 targets
> sd0 at scsibus1 targ 0 lun 0: <ATA, TOSHIBA MQ01ABD1, AX0R> SCSI3 0/direct
> fixed naa.5000039614b041b8
> sd0: 953869MB, 512 bytes/sector, 1953525168 sectors
> cd0 at scsibus1 targ 2 lun 0: <MATSHITA, DVD-RAM UJ8G6, 1.00> ATAPI 5/cdrom
> removable
> ohci0 at pci0 dev 18 function 0 "AMD Hudson-2 USB" rev 0x11: apic 0 int 18,
> version 1.0, legacy support
> ehci0 at pci0 dev 18 function 2 "AMD Hudson-2 USB2" rev 0x11: apic 0 int 17
> usb1 at ehci0: USB revision 2.0
> uhub1 at usb1 configuration 1 interface 0 "AMD EHCI root hub" rev 2.00/1.00
> addr 1
> ohci1 at pci0 dev 19 function 0 "AMD Hudson-2 USB" rev 0x11: apic 0 int 18,
> version 1.0, legacy support
> ehci1 at pci0 dev 19 function 2 "AMD Hudson-2 USB2" rev 0x11: apic 0 int 17
> usb2 at ehci1: USB revision 2.0
> uhub2 at usb2 configuration 1 interface 0 "AMD EHCI root hub" rev 2.00/1.00
> addr 1
> piixpm0 at pci0 dev 20 function 0 "AMD Hudson-2 SMBus" rev 0x16: polling
> iic0 at piixpm0
> spdmem0 at iic0 addr 0x50: 8GB DDR3 SDRAM PC3-12800 SO-DIMM
> spdmem1 at iic0 addr 0x51: 8GB DDR3 SDRAM PC3-12800 SO-DIMM
> azalia1 at pci0 dev 20 function 2 "AMD Hudson-2 HD Audio" rev 0x01: msi
> azalia1: codecs: Realtek ALC269
> audio0 at azalia1
> pcib0 at pci0 dev 20 function 3 "AMD Hudson-2 LPC" rev 0x11
> ppb0 at pci0 dev 20 function 4 "AMD Hudson-2 PCI" rev 0x40
> pci1 at ppb0 bus 1
> sdhc0 at pci0 dev 20 function 7 "AMD Hudson-2 SD Host Controller" rev 0x00:
> apic 0 int 16
> sdhc0: SDHC 2.0, 50 MHz base clock
> sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed, dma
> ppb1 at pci0 dev 21 function 0 "AMD Hudson-2 PCIE" rev 0x00
> pci2 at ppb1 bus 2
> ppb2 at pci0 dev 21 function 2 "AMD Hudson-2 PCIE" rev 0x00
> pci3 at ppb2 bus 3
> re0 at pci3 dev 0 function 0 "Realtek 8168" rev 0x0c: RTL8168G/8111G
> (0x4c00), msi, address 1c:b7:2c:22:fb:c9
> rgephy0 at re0 phy 7: RTL8251 PHY, rev. 0
> pchb4 at pci0 dev 24 function 0 "AMD AMD64 15h Link Cfg" rev 0x00
> pchb5 at pci0 dev 24 function 1 "AMD AMD64 15h Address Map" rev 0x00
> pchb6 at pci0 dev 24 function 2 "AMD AMD64 15h DRAM Cfg" rev 0x00
> pchb7 at pci0 dev 24 function 3 "AMD AMD64 15h Misc Cfg" rev 0x00
> pchb8 at pci0 dev 24 function 4 "AMD AMD64 15h CPU Power" rev 0x00
> pchb9 at pci0 dev 24 function 5 "AMD AMD64 15h Misc Cfg" rev 0x00
> usb3 at ohci0: USB revision 1.0
> uhub3 at usb3 configuration 1 interface 0 "AMD OHCI root hub" rev 1.00/1.00
> addr 1
> usb4 at ohci1: USB revision 1.0
> uhub4 at usb4 configuration 1 interface 0 "AMD OHCI root hub" rev 1.00/1.00
> addr 1
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5 irq 1 irq 12
> pckbd0 at pckbc0 (kbd slot)
> wskbd0 at pckbd0: console keyboard
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> vmm0 at mainbus0: SVM/RVI
> efifb at mainbus0 not configured
> uhub5 at uhub0 port 2 configuration 1 interface 0 "GenesysLogic USB3.0 Hub"
> rev 3.00/92.24 addr 2
> uhub6 at uhub0 port 4 configuration 1 interface 0 "GenesysLogic USB2.0 Hub"
> rev 2.10/92.24 addr 3
> uhidev0 at uhub6 port 4 configuration 1 interface 0 "vendor 0x0000 USB
> OPTICAL MOUSE" rev 1.10/1.00 addr 4
> uhidev0: iclass 3/1, 1 report id
> ums0 at uhidev0 reportid 1: 3 buttons, Z dir
> wsmouse0 at ums0 mux 0
> uvideo0 at uhub2 port 4 configuration 1 interface 0 "Chicony Electronics
> USB2.0 VGA UVC WebCam" rev 2.00/99.16 addr 2
> video0 at uvideo0
> uhidev1 at uhub3 port 1 configuration 1 interface 0 "KINESIS FREESTYLE KB800
> KB800 Kinesis Freestyle" rev 1.10/1.22 addr 2
> uhidev1: iclass 3/1
> ukbd0 at uhidev1: 8 variable keys, 6 key codes
> wskbd1 at ukbd0 mux 1
> uhidev2 at uhub3 port 1 configuration 1 interface 1 "KINESIS FREESTYLE KB800
> KB800 Kinesis Freestyle" rev 1.10/1.22 addr 2
> uhidev2: iclass 3/0, 3 report ids
> uhid0 at uhidev2 reportid 2: input=1, output=0, feature=0
> uhid1 at uhidev2 reportid 3: input=2, output=0, feature=0
> vscsi0 at root
> scsibus2 at vscsi0: 256 targets
> softraid0 at root
> scsibus3 at softraid0: 256 targets
> sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> SCSI2 0/direct fixed
> sd1: 953868MB, 512 bytes/sector, 1953523553 sectors
> root on sd1a (6759d2c493c65bb1.a) swap on sd1b dump on sd1b
> initializing kernel modesetting (KAVERI 0x1002:0x130D 0x1043:0x17FD).
> error: [drm:pid0:cik_ring_test] *ERROR* radeon: ring 2 test failed
> (scratch(0x3010C)=0xCAFEDEAD)
> error: [drm:pid0:cik_sdma_ring_test] *ERROR* radeon: ring 3 test failed
> (0xCAFEDEAD)
> drm:pid0:cik_init *ERROR* disabling GPU acceleration
> Can't enable IRQ/MSI because no handler is installed
> radeondrm0: 1366x768, 32bpp
> wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0
> wskbd1: connecting to wsdisplay0
> wsdisplay0: screen 1-5 added (std, vt100 emulation)
> wsmouse0 detached
> ums0 detached
> uhidev0 detached
> uhidev0 at uhub6 port 4 configuration 1 interface 0 "vendor 0x0000 USB
> OPTICAL MOUSE" rev 1.10/1.00 addr 4
> uhidev0: iclass 3/1, 1 report id
> ums0 at uhidev0 reportid 1: 3 buttons, Z dir
> wsmouse0 at ums0 mux 0
> uhub0: device problem, disabling port 3
> uhub0: device problem, disabling port 3
> uhub0: device problem, disabling port 3
> umodem0 at uhub0 port 3 configuration 1 interface 1 "samsung
> SAMSUNG-SGH-I717" rev 2.00/4.00 addr 5
> umodem0: data interface 2, has no CM over data, has no break
> umodem0: status change notification available
> ucom0 at umodem0
> ugen0 at uhub0 port 3 configuration 1 "samsung SAMSUNG-SGH-I717" rev
> 2.00/4.00 addr 5
> ucom0 detached
> umodem0 detached
> ugen0 detached
> umodem0 at uhub0 port 3 configuration 1 interface 1 "samsung
> SAMSUNG-SGH-I717" rev 2.00/4.00 addr 5
> umodem0: data interface 2, has no CM over data, has no break
> umodem0: status change notification available
> ucom0 at umodem0
> ugen0 at uhub0 port 3 configuration 1 "samsung SAMSUNG-SGH-I717" rev
> 2.00/4.00 addr 5
> ucom0 detached
> umodem0 detached
> ugen0 detached
> uhub0: device problem, disabling port 3
> umodem0 at uhub0 port 3 configuration 1 interface 1 "samsung
> SAMSUNG-SGH-I717" rev 2.00/4.00 addr 5
> umodem0: data interface 2, has no CM over data, has no break
> umodem0: status change notification available
> ucom0 at umodem0
> ugen0 at uhub0 port 3 configuration 1 "samsung SAMSUNG-SGH-I717" rev
> 2.00/4.00 addr 5
> ucom0 detached
> umodem0 detached
> ugen0 detached
> umodem0 at uhub0 port 3 configuration 1 interface 1 "samsung
> SAMSUNG-SGH-I717" rev 2.00/4.00 addr 5
> umodem0: data interface 2, has no CM over data, has no break
> umodem0: status change notification available
> ucom0 at umodem0
> ugen0 at uhub0 port 3 configuration 1 "samsung SAMSUNG-SGH-I717" rev
> 2.00/4.00 addr 5
> ucom0 detached
> umodem0 detached
> ugen0 detached
> umodem0 at uhub0 port 3 configuration 1 interface 1 "samsung
> SAMSUNG-SGH-I717" rev 2.00/4.00 addr 5
> umodem0: data interface 2, has no CM over data, has no break
> umodem0: status change notification available
> ucom0 at umodem0
> ugen0 at uhub0 port 3 configuration 1 "samsung SAMSUNG-SGH-I717" rev
> 2.00/4.00 addr 5
> ucom0 detached
> umodem0 detached
> ugen0 detached
> uhub0: device problem, disabling port 3
> umodem0 at uhub0 port 3 configuration 1 interface 1 "samsung
> SAMSUNG-SGH-I717" rev 2.00/4.00 addr 5
> umodem0: data interface 2, has no CM over data, has no break
> umodem0: status change notification available
> ucom0 at umodem0
> ugen0 at uhub0 port 3 configuration 1 "samsung SAMSUNG-SGH-I717" rev
> 2.00/4.00 addr 5
> ucom0 detached
> umodem0 detached
> ugen0 detached
> uhub0: device problem, disabling port 3
> uhub0: device problem, disabling port 3
> umodem0 at uhub0 port 3 configuration 1 interface 1 "samsung
> SAMSUNG-SGH-I717" rev 2.00/4.00 addr 5
> umodem0: data interface 2, has no CM over data, has no break
> umodem0: status change notification available
> ucom0 at umodem0
> ugen0 at uhub0 port 3 configuration 1 "samsung SAMSUNG-SGH-I717" rev
> 2.00/4.00 addr 5
> ucom0 detached
> umodem0 detached
> ugen0 detached
> usbd_free_xfer: xfer=0xffffff043e65fb40 not free
>
>
>
>
> Xorg.0.log:--------------------
> [ 78310.176]
> X.Org X Server 1.19.6
> Release Date: 2017-12-20
> [ 78310.187] X Protocol Version 11, Revision 0
> [ 78310.192] Build Operating System: OpenBSD 6.4 amd64
> [ 78310.198] Current Operating System: OpenBSD asusobsd.onemodel.org 6.4
> GENERIC.MP#364 amd64
> [ 78310.204] Build Date: 25 October 2018 11:39:05PM
> [ 78310.209]
> [ 78310.214] Current version of pixman: 0.34.0
> [ 78310.220] Before reporting problems, check http://wiki.x.org
> to make sure that you have the latest version.
> [ 78310.220] Markers: (--) probed, (**) from config file, (==) default
> setting,
> (++) from command line, (!!) notice, (II) informational,
> (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> [ 78310.242] (==) Log file: "/home/lcall/.local/share/xorg/Xorg.0.log", Time:
> Sat Oct 27 11:48:18 2018
> [ 78310.248] (==) Using system config directory
> "/usr/X11R6/share/X11/xorg.conf.d"
> [ 78310.248] (==) No Layout section. Using the first Screen section.
> [ 78310.248] (==) No screen section available. Using defaults.
> [ 78310.248] (**) |-->Screen "Default Screen Section" (0)
> [ 78310.248] (**) | |-->Monitor "<default monitor>"
> [ 78310.249] (==) No monitor specified for screen "Default Screen Section".
> Using a default monitor configuration.
> [ 78310.249] (==) Automatically adding devices
> [ 78310.249] (==) Automatically enabling devices
> [ 78310.249] (==) Not automatically adding GPU devices
> [ 78310.249] (==) Max clients allowed: 256, resource mask: 0x1fffff
> [ 78310.249] (==) FontPath set to:
> /usr/X11R6/lib/X11/fonts/misc/,
> /usr/X11R6/lib/X11/fonts/TTF/,
> /usr/X11R6/lib/X11/fonts/OTF/,
> /usr/X11R6/lib/X11/fonts/Type1/,
> /usr/X11R6/lib/X11/fonts/100dpi/,
> /usr/X11R6/lib/X11/fonts/75dpi/
> [ 78310.249] (==) ModulePath set to "/usr/X11R6/lib/modules"
> [ 78310.249] (II) The server relies on wscons to provide the list of input
> devices.
> If no devices become available, reconfigure wscons or disable
> AutoAddDevices.
> [ 78310.249] (II) Loader magic: 0x2fcd2b71000
> [ 78310.249] (II) Module ABI versions:
> [ 78310.249] X.Org ANSI C Emulation: 0.4
> [ 78310.249] X.Org Video Driver: 23.0
> [ 78310.249] X.Org XInput driver : 24.1
> [ 78310.249] X.Org Server Extension : 10.0
> [ 78310.249] (WW) checkDevMem: failed to open /dev/xf86 and /dev/mem
> (Permission denied)
> Check that you have set 'machdep.allowaperture=1'
> in /etc/sysctl.conf and reboot your machine
> refer to xf86(4) for details
> [ 78310.249] linear framebuffer access unavailable
> [ 78310.249] (II) LoadModule: "glx"
> [ 78310.251] (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
> [ 78310.256] (II) Module glx: vendor="X.Org Foundation"
> [ 78310.256] compiled for 1.19.6, module version = 1.0.0
> [ 78310.256] ABI class: X.Org Server Extension, version 10.0
> [ 78310.256] (==) Assigned the driver to the xf86ConfigLayout
> [ 78310.256] (EE) No drivers available.
> [ 78310.256] (EE)
> Fatal server error:
> [ 78310.261] (EE) no screens found(EE)
> [ 78310.267] (EE)
> Please consult the The X.Org Foundation support
> at http://wiki.x.org
> for help.
> [ 78310.272] (EE) Please also check the log file at
> "/home/lcall/.local/share/xorg/Xorg.0.log" for additional information.
> [ 78310.277] (EE)
> [ 78310.283] (EE) Server terminated with error (1). Closing log file.
>
>
>
> /usr/X11R6/share/X11/xorg.conf.d/10-radeon.conf
> -----------------------------------------------
> Section "OutputClass"
> Identifier "Radeon"
> MatchDriver "radeon"
> Driver "radeon"
> EndSection
>
