Hi,� I have one of these 4-port Realtek NIC cards:
https://www.ebay.co.uk/itm/PCIe-PCI-Express-to-4x-Gigabit-Card-4-Port-Ethernet-Network-Adapter-10-100-1000M/252484240577?epid=505371101�
I
am running OpenBSD 6.3 stable.� During boot the card is seen, but it only
works occasionally. When it works I can see all the 4 ports using
"ifconfig" and I can assign IP addresses etc. When it doesn't work
nothing is shown using "ifconfig".� As far as I understand from the "re"
manpage RTL8168E/8111E is supported.� This is my dmesg:�
http://paste.debian.net/1046756/� When
the card isn't working I also get this:� +ppb1 at pci1 dev 0 function 0
vendor "ASMedia", unknown product 0x1184 rev 0x00
+pci2 at ppb1 bus 2
+ppb2 at pci2 dev 1 function 0 vendor "ASMedia", unknown product 0x1184
rev 0x00: not configured by system firmware
+ppb3 at pci2 dev 3 function 0 vendor "ASMedia", unknown product 0x1184
rev 0x00: not configured by system firmware
+ppb4 at pci2 dev 5 function 0 vendor "ASMedia", unknown product 0x1184
rev 0x00: not configured by system firmware
+ppb5 at pci2 dev 7 function 0 vendor "ASMedia", unknown product 0x1184
rev 0x00: not configured by system firmware
� Is this a driver issue or something else perhaps?� Kindest regards
