-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Today jared r r spiegel spake forth boldly:
On Fri, Feb 03, 2006 at 09:02:06PM +0000, Denny White wrote:
since installing the Voodoo
card. Here's the current output of sysctl hw.sensors:
hw.sensors.0=lm0, VCORE_A, volts_dc, 1.73 V
hw.sensors.1=lm0, VCORE_B, volts_dc, 1.74 V
hw.sensors.2=lm0, +3.3V, volts_dc, 3.26 V
hw.sensors.3=lm0, +5V, volts_dc, 4.91 V
hw.sensors.4=lm0, +12V, volts_dc, 12.28 V
hw.sensors.5=lm0, -12V, volts_dc, -11.82 V
hw.sensors.6=lm0, -5V, volts_dc, 3.55 V
hw.sensors.7=lm0, +5VSB, volts_dc, 4.92 V
hw.sensors.8=lm0, VBAT, volts_dc, 3.26 V
hw.sensors.9=lm0, Temp1, temp, 33.00 degC / 91.40 degF
hw.sensors.10=lm0, Temp2, temp, 22.50 degC / 72.50 degF
hw.sensors.11=lm0, Temp3, temp, 127.50 degC / 261.50 degF
hw.sensors.12=lm0, Fan1, fanrpm, 4891 RPM
The one that's alarming is the 2nd from last line, that
says 261.50 degF.
i have a similar output for the temp sensors in my soekrises:
$ sysctl -w hw.sensors | grep temp
hw.sensors.0=nsclpcsio0, TSENS1, temp, 127.00 degC / 260.60 degF
hw.sensors.1=nsclpcsio0, TSENS2, temp, 127.00 degC / 260.60 degF
hw.sensors.2=nsclpcsio0, TNSC, temp, 62.00 degC / 143.60 degF
(this is a dec.3 snapshot)
any part of the soekris i can manage to physically touch
feels cooler than 260 degF, since i don't have second degree
burns on my fingers thereafter...
only having looked at google for a little while, i seem to
recall there was a "scale factor" or some other number that
had to be used as a multiplier to "ramp up" the outputs of
the measured data so that they would equate to "real-world"
values; i don't know if this is a scale factor issue, or if
i'm totally wrong about the scale factor thing either...
wrt the idea of it being your video card, if you take
the card out, does hw.sensors.11 go away? i know you said
you didn't recall that value being there, but to be certain
about it...
--
jared
[ openbsd 3.9-beta GENERIC ( jan 30 ) // i386 ]
Thanks for the reply. Felt around inside the box. Nothing very
warm at all. Now that I've had time to think about it, I may
have played with hw.sensors before replacing the mobo. I had an
old via abit in there. Had to change out due to some leaking
capacitors. Got an aopen in now. Everythings been working okay,
so far. I'll pull the video card out & check it again, but it
won't be until my day off Weds. Everything's working so well
right now, hate to mess with it. I googled around again, adding
the scale factor in, but didn't get a whole lot. Will try again
in the a.m. when I get off work.
Denny White
Please do not CC me. Already subscribed to mailing list.
GnuPG key : 0x1644E79A | http://wwwkeys.nl.pgp.net
Fingerprint: D0A9 AD44 1F10 E09E 0E67 EC25 CB44 F2E5 1644 E79A
iD8DBQFD5RHsy0Ty5RZE55oRAv+kAJ91nJdj6gWfyWqJPopTFCzkcDPthQCfSBsh
siShqZt0NgjLMho2YxvXGPA=
=CPEa
-----END PGP SIGNATURE-----
