hi
solved
i run in this problem
https://an.undulating.space/post/171020-erl-openbsd-smp/
thanks for help
holger
Am 12.06.2018 um 16:29 schrieb Holger Glaess:
hi
sorry the numcores=4 missed by cut & paste
now thw whole printenv ( sorry )
Octeon ubnt_e300(ram)# printenv
autoload=n
baudrate=115200
boardname=ubnt_e300
bootcmd=usb reset; fatload usb 0 ${loadaddr} bsd; bootoctlinux
rootdev=sd0 numcores=4
bootdelay=10
dram_size_mbytes=1024
env_size=2000
eth1addr=fc:ec:da:40:fa:43
eth2addr=fc:ec:da:40:fa:44
eth3addr=fc:ec:da:40:fa:45
eth4addr=fc:ec:da:40:fa:46
eth5addr=fc:ec:da:40:fa:47
ethact=octeth1
ethaddr=fc:ec:da:40:fa:42
ethprime=octeth1
fdtaddr=80000
flash_base_addr=1f400000
flash_size=800000
loadaddr=0x20000000
mtdparts=spi32766.0:3072k(boot0),1024k(dummy),64k(eeprom)
nuke_env=env default -a;saveenv
numcores=4
numcoreshex=0x4
octeon_failsafe_mode=0
octeon_ram_mode=1
old_bootcmd="fatload mmc 0 $(loadaddr) vmlinux.64;bootoctlinux
$(loadaddr) numcores=$(numcores) endbootargs mem=0 root=/dev/mmcblk0p2
rootdela
y=10 rw rootsqimg=squashfs.img rootsqwdir=w
mtdparts=spi32766.0:3072k(boot0),1024k(dummy),64k(eeprom)"
serial#=FCECDA40FA42
stderr=serial
stdin=serial,pci,bootcmd
stdout=serial
usb=start;fatload usb 0 $loadaddr bsd.mp;bootoctlinux rootdev=/dev/sd0
numcores=4
ver=U-Boot 2013.07 (Build time: Jan 04 2018 - 17:14:38)
Environment size: 1132/8188 bytes
Am 12.06.2018 um 16:24 schrieb Peter J. Philipp:
On Tue, Jun 12, 2018 at 03:08:49PM +0200, Holger Glaess wrote:
hi
hello,
i bought the edgerouter 6 to play around wird openbsd 6.3 current.
i install and boot current susccessful on a usb stick.
my problem is that he only use one core.
if i boot the boot the bsd.mp kernel by tftp , the system have 4 cores.
Take a look at INSTALL.octeon file.
beta$ grep -i core INSTALL.octeon
On multi-core systems, boot with all CPU cores enabled:
# bootoctlinux rootdev=rd0 numcores=<number of cores>
...
Hope that helps...
Regards,
-peter
my boot env
Octeon ubnt_e300(ram)# printenv
autoload=n
baudrate=115200
boardname=ubnt_e300
bootcmd=usb reset; fatload usb 0 ${loadaddr} bsd; bootoctlinux
rootdev=sd0
numcores=4
bootdelay=10
dram_size_mbytes=1024
env_size=2000
eth1addr=fc:ec:da:40:fa:43
eth2addr=fc:ec:da:40:fa:44
eth3addr=fc:ec:da:40:fa:45
eth4addr=fc:ec:da:40:fa:46
eth5addr=fc:ec:da:40:fa:47
ethact=octeth1
ethaddr=fc:ec:da:40:fa:42
ethprime=octeth1
fdtaddr=80000
flash_base_addr=1f400000
flash_size=800000
loadaddr=0x20000000
mtdparts=spi32766.0:3072k(boot0),1024k(dummy),64k(eeprom)
nuke_env=env default -a;saveenv
numcores=4
numcoreshex=0x4
octeon_failsafe_mode=0
octeon_ram_mode=1
old_bootcmd="fatload mmc 0 $(loadaddr) vmlinux.64;bootoctlinux
$(loadaddr)
numcores=$(numcores) endbootargs mem=0 root=/dev/mmcblk0p2 rootdelay=
10 rw rootsqimg=squashfs.img rootsqwdir=w
mtdparts=spi32766.0:3072k(boot0),1024k(dummy),64k(eeprom)"
serial#=FCECDA40FA42
stderr=serial
stdin=serial,pci,bootcmd
stdout=serial
usb=start;fatload usb 0 $loadaddr bsd.mp;bootoctlinux rootdev=/dev/sd0
numcores=4
ver=U-Boot 2013.07 (Build time: Jan 04 2018 - 17:14:38)
Environment size: 1132/8188 bytes
Octeon ubnt_e300(ram)#
any clue for me to boot the box with all cpu cores ?
holger
