Hey, While moving one of machines from 6.0 to 6.1, I found 6.1 not able to attach ix-device. Machine is HP DL360 Gen9.
ix0 at pci5 dev 0 function 0 "Intel 82599" rev 0x01: mmba is not mem space ix1 at pci5 dev 0 function 1 "Intel 82599" rev 0x01: mmba is not mem space Found this thread http://openbsd-archive.7691.n7.nabble.com/OpenBSD-6-1-ix-Intel-82598EB-issue-td317072.html <http://openbsd-archive.7691.n7.nabble.com/OpenBSD-6-1-ix-Intel-82598EB-issue-td317072.html> and as far as I can see, this diff is in tree, but not helping here :( Any clues? 4:0:1: Intel 82599 0x0000: Vendor ID: 8086 Product ID: 10fb 0x0004: Command: 0147 Status: 0010 0x0008: Class: 02 Subclass: 00 Interface: 00 Revision: 01 0x000c: BIST: 00 Header Type: 80 Latency Timer: 00 Cache Line Size: 10 0x0010: BAR mem 32bit addr: 0x92c00000/0x00100000 0x0014: BAR empty (00000000) 0x0018: BAR io addr: 0x00002000/0x0020 0x001c: BAR mem 32bit addr: 0x92e00000/0x00004000 0x0020: BAR empty (00000000) 0x0024: BAR empty (00000000) 0x0028: Cardbus CIS: 00000000 0x002c: Subsystem Vendor ID: 103c Product ID: 17d0 0x0030: Expansion ROM Base Address: 00000000 0x0038: 00000000 0x003c: Interrupt Pin: 01 Line: ff Min Gnt: 00 Max Lat: 00 0x0040: Capability 0x01: Power Management State: D0 PME# enabled 0x0050: Capability 0x05: Message Signalled Interrupts (MSI) 0x0070: Capability 0x11: Extended Message Signalled Interrupts (MSI-X) 0x00a0: Capability 0x10: PCI Express Link Speed: 5.0 / 5.0 GT/s Link Width: x8 / x8 0x0100: Enhanced Capability 0x01: Advanced Error Reporting 0x0140: Enhanced Capability 0x03: Device Serial Number 0x0150: Enhanced Capability 0x0e: Alternate Routing ID 0x0160: Enhanced Capability 0x10: Single Root I/O Virtualization 0x00e0: Capability 0x03: Vital Product Data (VPD) Br
