Hi, Today I discovered some interesting details: I guess ntopng has a memory leak, thus eating all my 4GB RAM and some 3GB swap - this appeared in the morning, so after all the backups and heavy traffic occured. When I fired up a rcctl stop ntopng the ssh connection stalled. The firewall could not handle further connections, and established connections dropped. The system could not answer to ping packets etc. This now also happened on a 2nd machine. After 20 minutes (when I was in a taxi to the datacenter) I could login again and realized that ntopng was stopped and swap was freed.
I have now disabled ntopng. I kindly ask the devs to take a look at this! If you need a testsetup for this or if I can do anything, just contact me. Regards, infoomatic > Gesendet: Mittwoch, 25. April 2018 um 15:25 Uhr > Von: Infoomatic <infooma...@gmx.at> > An: misc@openbsd.org, b...@openbsd.org > Betreff: crash of OpenBSD 6.3 -stable (amd64 MP kernel) > > Hi folks, > > Unfortunately this is not a complete bugreport since I could not retrieve > relevant information, however [1] is the dmesg. > I upgraded to the new OpenBSD 6.3 version on monday, however, today it > crashed - better: it hung completely. I could not reach it any more via ssh, > a ping needed 15 seconds instead of 19ms, and only some packets arrived at > the host - but the network was normal. > The machine runs the standard services from the default install plus httpd > and relayd, and also third party software: OpenVPN, scanlogd and ntopng. > > In the sysctl.conf I have set ddb.panic=0. > > When I was physically standing in front of the machine I was expecting to see > some messages on the screen, or even ddb, so to get some info for the devs, > but this was not the case. > I plugged in a PS/2 keyboard with an USB-adapter and promptly got on my > screen (without the "date hostname" - took this from the log): > Apr 25 13:28:21 dorie /bsd: uhub0: device problem, disabling port 1 > > I tried another USB port and got: > Apr 25 13:29:34 dorie /bsd: uhub0: device problem, disabling port 10 > > The keyboard was not working on the machine, so I grabbed another one. I > plugged it in and suddenly the monitor was filled up with messages which kept > flooding and did not stop: > scsi_xfer pool exhausted! > > I then had to reset the machine. > > I also found suspicious messages in the log at about the time when the > machine got irresponsive: > Apr 25 11:23:00 dorie relayd[31883]: rsae_send_imsg: poll timeout > Apr 25 11:23:00 dorie relayd[96425]: rsae_send_imsg: poll timeout > Apr 25 11:23:11 dorie relayd[39081]: rsae_send_imsg: poll timeout > Apr 25 11:23:16 dorie relayd[96425]: rsae_send_imsg: poll timeout > Apr 25 11:23:28 dorie relayd[96425]: relay: proc_dispatch: relay 1 got > invalid imsg 59 peerid -1 from ca 1 > Apr 25 11:23:34 dorie relayd[31883]: rsae_send_imsg: poll timeout > Apr 25 11:23:42 dorie relayd[31883]: relay: pipe closed > Apr 25 11:23:43 dorie relayd[39081]: rsae_send_imsg: imsg_flush: Broken pipe > Apr 25 11:23:44 dorie relayd[39081]: relay: pipe closed > > Maybe some devs have an idea where to look for a bug. Any tipps how to deal > with this matter in the future? > > TIA and regards, > infoomatic > > > [1] > OpenBSD 6.3 (GENERIC.MP) #107: Sat Mar 24 14:21:59 MDT 2018 > dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP > real mem = 4238319616 (4041MB) > avail mem = 4102795264 (3912MB) > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xebb80 (74 entries) > bios0: vendor American Megatrends Inc. version "0801" date 08/20/2014 > bios0: Thomas-Krenn.AG P9D-MV(X) Series > acpi0 at bios0: rev 2 > acpi0: sleep states S0 S3 S4 S5 > acpi0: tables DSDT FACP APIC FPDT SSDT SSDT SSDT SSDT MCFG HPET SSDT SSDT > BERT DMAR EINJ ERST HEST > acpi0: wakeup devices PXSX(S4) RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) > PXSX(S4) PXSX(S4) PXSX(S4) PXSX(S4) PXSX(S4) GLAN(S4) EHC1(S4) EHC2(S4) > XHC_(S4) HDEF(S4) [...] > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel(R) Xeon(R) CPU E3-1230L v3 @ 1.80GHz, 2594.38 MHz > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,SENSOR,ARAT,MELTDOWN > cpu0: 256KB 64b/line 8-way L2 cache > acpitimer0: recalibrated TSC frequency 1795841682 Hz > cpu0: smt 0, core 0, package 0 > mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges > cpu0: apic clock running at 99MHz > cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4, IBE > cpu1 at mainbus0: apid 2 (application processor) > cpu1: Intel(R) Xeon(R) CPU E3-1230L v3 @ 1.80GHz, 2594.00 MHz > cpu1: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,SENSOR,ARAT,MELTDOWN > cpu1: 256KB 64b/line 8-way L2 cache > cpu1: smt 0, core 1, package 0 > cpu2 at mainbus0: apid 4 (application processor) > cpu2: Intel(R) Xeon(R) CPU E3-1230L v3 @ 1.80GHz, 2594.00 MHz > cpu2: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,SENSOR,ARAT,MELTDOWN > cpu2: 256KB 64b/line 8-way L2 cache > cpu2: smt 0, core 2, package 0 > cpu3 at mainbus0: apid 6 (application processor) > cpu3: Intel(R) Xeon(R) CPU E3-1230L v3 @ 1.80GHz, 2594.00 MHz > cpu3: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,SENSOR,ARAT,MELTDOWN > cpu3: 256KB 64b/line 8-way L2 cache > cpu3: smt 0, core 3, package 0 > cpu4 at mainbus0: apid 1 (application processor) > cpu4: Intel(R) Xeon(R) CPU E3-1230L v3 @ 1.80GHz, 2594.00 MHz > cpu4: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,SENSOR,ARAT,MELTDOWN > cpu4: 256KB 64b/line 8-way L2 cache > cpu4: smt 1, core 0, package 0 > cpu5 at mainbus0: apid 3 (application processor) > cpu5: Intel(R) Xeon(R) CPU E3-1230L v3 @ 1.80GHz, 2594.00 MHz > cpu5: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,SENSOR,ARAT,MELTDOWN > cpu5: 256KB 64b/line 8-way L2 cache > cpu5: smt 1, core 1, package 0 > cpu6 at mainbus0: apid 5 (application processor) > cpu6: Intel(R) Xeon(R) CPU E3-1230L v3 @ 1.80GHz, 2594.00 MHz > cpu6: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,SENSOR,ARAT,MELTDOWN > cpu6: 256KB 64b/line 8-way L2 cache > cpu6: smt 1, core 2, package 0 > cpu7 at mainbus0: apid 7 (application processor) > cpu7: Intel(R) Xeon(R) CPU E3-1230L v3 @ 1.80GHz, 2594.00 MHz > cpu7: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,SENSOR,ARAT,MELTDOWN > cpu7: 256KB 64b/line 8-way L2 cache > cpu7: smt 1, core 3, package 0 > ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins > acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255 > acpihpet0 at acpi0: 14318179 Hz > acpihpet0: recalibrated TSC frequency 1795708643 Hz > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus 1 (RP01) > acpiprt2 at acpi0: bus 2 (RP02) > acpiprt3 at acpi0: bus 3 (RP03) > acpiprt4 at acpi0: bus 4 (BR20) > acpiprt5 at acpi0: bus -1 (PEG0) > acpiprt6 at acpi0: bus -1 (PEG1) > acpiprt7 at acpi0: bus -1 (PEG2) > acpiec0 at acpi0: not present > acpicpu0 at acpi0: C2(350@117 mwait.1@0x20), C1(1000@1 mwait.1), PSS > acpicpu1 at acpi0: C2(350@117 mwait.1@0x20), C1(1000@1 mwait.1), PSS > acpicpu2 at acpi0: C2(350@117 mwait.1@0x20), C1(1000@1 mwait.1), PSS > acpicpu3 at acpi0: C2(350@117 mwait.1@0x20), C1(1000@1 mwait.1), PSS > acpicpu4 at acpi0: C2(350@117 mwait.1@0x20), C1(1000@1 mwait.1), PSS > acpicpu5 at acpi0: C2(350@117 mwait.1@0x20), C1(1000@1 mwait.1), PSS > acpicpu6 at acpi0: C2(350@117 mwait.1@0x20), C1(1000@1 mwait.1), PSS > acpicpu7 at acpi0: C2(350@117 mwait.1@0x20), C1(1000@1 mwait.1), PSS > acpipwrres0 at acpi0: FN00, resource for FAN0 > acpipwrres1 at acpi0: FN01, resource for FAN1 > acpipwrres2 at acpi0: FN02, resource for FAN2 > acpipwrres3 at acpi0: FN03, resource for FAN3 > acpipwrres4 at acpi0: FN04, resource for FAN4 > acpitz0 at acpi0: critical temperature is 95 degC > acpitz1 at acpi0: critical temperature is 95 degC > "INT3F0D" at acpi0 not configured > "PNP0A05" at acpi0 not configured > acpibtn0 at acpi0: PWRB > "PNP0C0B" at acpi0 not configured > "PNP0C0B" at acpi0 not configured > "PNP0C0B" at acpi0 not configured > "PNP0C0B" at acpi0 not configured > "PNP0C0B" at acpi0 not configured > acpivideo0 at acpi0: GFX0 > acpivout0 at acpivideo0: DD1F > ipmi at mainbus0 not configured > cpu0: Enhanced SpeedStep 2594 MHz: speeds: 1801, 1800, 1700, 1600, 1500, > 1400, 1300, 1200, 1100, 1000, 900, 800 MHz > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "Intel Xeon E3-1200 v3 Host" rev 0x06 > xhci0 at pci0 dev 20 function 0 "Intel 8 Series xHCI" rev 0x05: msi > usb0 at xhci0: USB revision 3.0 > uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 > addr 1 > ehci0 at pci0 dev 26 function 0 "Intel 8 Series USB" rev 0x05: apic 8 int 20 > usb1 at ehci0: USB revision 2.0 > uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 > addr 1 > ppb0 at pci0 dev 28 function 0 "Intel 8 Series PCIE" rev 0xd5: msi > pci1 at ppb0 bus 1 > em0 at pci1 dev 0 function 0 "Intel I210" rev 0x03: msi, address > 54:a0:50:87:61:6d > ppb1 at pci0 dev 28 function 1 "Intel 8 Series PCIE" rev 0xd5: msi > pci2 at ppb1 bus 2 > em1 at pci2 dev 0 function 0 "Intel I210" rev 0x03: msi, address > 54:a0:50:87:61:6e > ppb2 at pci0 dev 28 function 2 "Intel 8 Series PCIE" rev 0xd5: msi > pci3 at ppb2 bus 3 > ppb3 at pci3 dev 0 function 0 "ASPEED Technology AST1150 PCI" rev 0x02 > pci4 at ppb3 bus 4 > vga1 at pci4 dev 0 function 0 "ASPEED Technology AST2000" rev 0x21 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > ehci1 at pci0 dev 29 function 0 "Intel 8 Series USB" rev 0x05: apic 8 int 23 > usb2 at ehci1: USB revision 2.0 > uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 > addr 1 > pcib0 at pci0 dev 31 function 0 "Intel C222 LPC" rev 0x05 > ahci0 at pci0 dev 31 function 2 "Intel 8 Series AHCI" rev 0x05: msi, AHCI 1.3 > ahci0: port 0: 6.0Gb/s > ahci0: port 1: 6.0Gb/s > scsibus1 at ahci0: 32 targets > sd0 at scsibus1 targ 0 lun 0: <ATA, SanDisk SD6SB1M1, X231> SCSI3 0/direct > fixed naa.5001b44cb0e4f2aa > sd0: 122104MB, 512 bytes/sector, 250069680 sectors, thin > sd1 at scsibus1 targ 1 lun 0: <ATA, SanDisk SD6SB1M1, X231> SCSI3 0/direct > fixed naa.5001b44cb0e4f283 > sd1: 122104MB, 512 bytes/sector, 250069680 sectors, thin > ichiic0 at pci0 dev 31 function 3 "Intel 8 Series SMBus" rev 0x05: apic 8 int > 18 > iic0 at ichiic0 > sdtemp0 at iic0 addr 0x19: stts2002 > sdtemp1 at iic0 addr 0x1b: stts2002 > iic0: addr 0x28 00=28 01=19 02=1c 03=02 04=10 05=1a 06=b4 07=54 08=60 09=70 > 0a=11 0b=66 0c=66 0d=44 0e=ff 0f=ff 10=a2 11=22 12=80 13=20 14=11 15=69 16=ff > 17=79 18=65 22=60 23=60 24=3c 25=0c 26=0f 29=5e 2a=d9 2b=21 2c=4b 2d=62 2e=1e > 2f=2e 30=27 31=14 32=90 33=74 34=f4 35=67 36=45 37=0d 38=84 39=fd 3a=80 3d=ff > 40=46 41=40 42=95 48=1c 49=1b 4a=76 4b=40 4c=c0 4e=80 4f=ff 50=ff 52=33 53=88 > 54=44 55=ec 56=c8 57=16 58=22 59=02 5a=24 5b=20 5c=66 5d=21 5e=02 5f=20 60=30 > 61=03 62=42 63=02 64=09 65=96 67=88 68=40 6c=65 6d=fd 6e=06 6f=7d 70=ff 71=20 > 7c=15 7d=15 88=8b 89=89 8a=01 8b=c2 8c=44 8f=1f 91=05 92=43 93=7d 94=65 95=06 > 96=70 97=40 98=28 99=ab 9a=de 9b=c0 9c=05 9d=01 9e=30 9f=25 a3=08 a4=08 a6=08 > a8=08 a9=55 aa=73 ab=5d ac=2b af=1a b6=c0 b7=68 ba=72 bb=71 bc=4d bd=09 c2=01 > c3=7a c4=33 cb=0d cc=03 cd=44 d2=ad d3=50 d4=0c d6=10 d8=3f dc=23 dd=c0 de=f0 > e3=10 e4=01 e5=03 e6=01 e7=88 f5=33 words 00=2828 01=1919 02=1c1c 03=0202 > 04=1010 05=1a1a 06=b4b4 07=5454 > lm1 at iic0 addr 0x2d: W83627DHG > spdmem0 at iic0 addr 0x51: 2GB DDR3 SDRAM ECC PC3-12800 with thermal sensor > spdmem1 at iic0 addr 0x53: 2GB DDR3 SDRAM ECC PC3-12800 with thermal sensor > isa0 at pcib0 > isadma0 at isa0 > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo > pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > pckbd0 at pckbc0 (kbd slot) > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > vmm0 at mainbus0: VMX/EPT > uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" > rev 2.00/0.05 addr 2 > uhub4 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" > rev 2.00/0.05 addr 2 > vscsi0 at root > scsibus2 at vscsi0: 256 targets > softraid0 at root > scsibus3 at softraid0: 256 targets > sd2 at scsibus3 targ 1 lun 0: <OPENBSD, SR RAID 1, 006> SCSI2 0/direct fixed > sd2: 39062MB, 512 bytes/sector, 79999472 sectors > root on sd2a (b8b4dfd776d3a45b.a) swap on sd2b dump on sd2b > ndp info overwritten for 2001:858:6:1900::1 by 00:17:0f:d4:60:00 on vether0 > syncing disks... done > rebooting... > OpenBSD 6.3 (GENERIC.MP) #1: Sat Apr 21 14:26:25 CEST 2018 > > r...@syspatch-63-amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP > real mem = 4238319616 (4041MB) > avail mem = 4102803456 (3912MB) > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xebb80 (74 entries) > bios0: vendor American Megatrends Inc. version "0801" date 08/20/2014 > bios0: Thomas-Krenn.AG P9D-MV(X) Series > acpi0 at bios0: rev 2 > acpi0: sleep states S0 S3 S4 S5 > acpi0: tables DSDT FACP APIC FPDT SSDT SSDT SSDT SSDT MCFG HPET SSDT SSDT > BERT DMAR EINJ ERST HEST > acpi0: wakeup devices PXSX(S4) RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) > PXSX(S4) PXSX(S4) PXSX(S4) PXSX(S4) PXSX(S4) GLAN(S4) EHC1(S4) EHC2(S4) > XHC_(S4) HDEF(S4) [...] > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel(R) Xeon(R) CPU E3-1230L v3 @ 1.80GHz, 2594.25 MHz > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,IBRS,IBPB,STIBP,SENSOR,ARAT,MELTDOWN > cpu0: 256KB 64b/line 8-way L2 cache > acpitimer0: recalibrated TSC frequency 1795845521 Hz > cpu0: smt 0, core 0, package 0 > mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges > cpu0: apic clock running at 99MHz > cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4, IBE > cpu1 at mainbus0: apid 2 (application processor) > cpu1: Intel(R) Xeon(R) CPU E3-1230L v3 @ 1.80GHz, 2594.00 MHz > cpu1: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,IBRS,IBPB,STIBP,SENSOR,ARAT,MELTDOWN > cpu1: 256KB 64b/line 8-way L2 cache > cpu1: smt 0, core 1, package 0 > cpu2 at mainbus0: apid 4 (application processor) > cpu2: Intel(R) Xeon(R) CPU E3-1230L v3 @ 1.80GHz, 2594.00 MHz > cpu2: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,IBRS,IBPB,STIBP,SENSOR,ARAT,MELTDOWN > cpu2: 256KB 64b/line 8-way L2 cache > cpu2: smt 0, core 2, package 0 > cpu3 at mainbus0: apid 6 (application processor) > cpu3: Intel(R) Xeon(R) CPU E3-1230L v3 @ 1.80GHz, 2594.00 MHz > cpu3: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,IBRS,IBPB,STIBP,SENSOR,ARAT,MELTDOWN > cpu3: 256KB 64b/line 8-way L2 cache > cpu3: smt 0, core 3, package 0 > cpu4 at mainbus0: apid 1 (application processor) > cpu4: Intel(R) Xeon(R) CPU E3-1230L v3 @ 1.80GHz, 2593.99 MHz > cpu4: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,IBRS,IBPB,STIBP,SENSOR,ARAT,MELTDOWN > cpu4: 256KB 64b/line 8-way L2 cache > cpu4: smt 1, core 0, package 0 > cpu5 at mainbus0: apid 3 (application processor) > cpu5: Intel(R) Xeon(R) CPU E3-1230L v3 @ 1.80GHz, 2593.99 MHz > cpu5: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,IBRS,IBPB,STIBP,SENSOR,ARAT,MELTDOWN > cpu5: 256KB 64b/line 8-way L2 cache > cpu5: smt 1, core 1, package 0 > cpu6 at mainbus0: apid 5 (application processor) > cpu6: Intel(R) Xeon(R) CPU E3-1230L v3 @ 1.80GHz, 2593.99 MHz > cpu6: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,IBRS,IBPB,STIBP,SENSOR,ARAT,MELTDOWN > cpu6: 256KB 64b/line 8-way L2 cache > cpu6: smt 1, core 2, package 0 > cpu7 at mainbus0: apid 7 (application processor) > cpu7: Intel(R) Xeon(R) CPU E3-1230L v3 @ 1.80GHz, 2593.99 MHz > cpu7: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,IBRS,IBPB,STIBP,SENSOR,ARAT,MELTDOWN > cpu7: 256KB 64b/line 8-way L2 cache > cpu7: smt 1, core 3, package 0 > ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins > acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255 > acpihpet0 at acpi0: 14318179 Hz > acpihpet0: recalibrated TSC frequency 1795707263 Hz > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus 1 (RP01) > acpiprt2 at acpi0: bus 2 (RP02) > acpiprt3 at acpi0: bus 3 (RP03) > acpiprt4 at acpi0: bus 4 (BR20) > acpiprt5 at acpi0: bus -1 (PEG0) > acpiprt6 at acpi0: bus -1 (PEG1) > acpiprt7 at acpi0: bus -1 (PEG2) > acpiec0 at acpi0: not present > acpicpu0 at acpi0: C2(350@117 mwait.1@0x20), C1(1000@1 mwait.1), PSS > acpicpu1 at acpi0: C2(350@117 mwait.1@0x20), C1(1000@1 mwait.1), PSS > acpicpu2 at acpi0: C2(350@117 mwait.1@0x20), C1(1000@1 mwait.1), PSS > acpicpu3 at acpi0: C2(350@117 mwait.1@0x20), C1(1000@1 mwait.1), PSS > acpicpu4 at acpi0: C2(350@117 mwait.1@0x20), C1(1000@1 mwait.1), PSS > acpicpu5 at acpi0: C2(350@117 mwait.1@0x20), C1(1000@1 mwait.1), PSS > acpicpu6 at acpi0: C2(350@117 mwait.1@0x20), C1(1000@1 mwait.1), PSS > acpicpu7 at acpi0: C2(350@117 mwait.1@0x20), C1(1000@1 mwait.1), PSS > acpipwrres0 at acpi0: FN00, resource for FAN0 > acpipwrres1 at acpi0: FN01, resource for FAN1 > acpipwrres2 at acpi0: FN02, resource for FAN2 > acpipwrres3 at acpi0: FN03, resource for FAN3 > acpipwrres4 at acpi0: FN04, resource for FAN4 > acpitz0 at acpi0: critical temperature is 95 degC > acpitz1 at acpi0: critical temperature is 95 degC > "INT3F0D" at acpi0 not configured > "PNP0A05" at acpi0 not configured > acpibtn0 at acpi0: PWRB > "PNP0C0B" at acpi0 not configured > "PNP0C0B" at acpi0 not configured > "PNP0C0B" at acpi0 not configured > "PNP0C0B" at acpi0 not configured > "PNP0C0B" at acpi0 not configured > acpivideo0 at acpi0: GFX0 > acpivout0 at acpivideo0: DD1F > ipmi at mainbus0 not configured > cpu0: Enhanced SpeedStep 2594 MHz: speeds: 1801, 1800, 1700, 1600, 1500, > 1400, 1300, 1200, 1100, 1000, 900, 800 MHz > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "Intel Xeon E3-1200 v3 Host" rev 0x06 > xhci0 at pci0 dev 20 function 0 "Intel 8 Series xHCI" rev 0x05: msi > usb0 at xhci0: USB revision 3.0 > uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 > addr 1 > ehci0 at pci0 dev 26 function 0 "Intel 8 Series USB" rev 0x05: apic 8 int 20 > usb1 at ehci0: USB revision 2.0 > uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 > addr 1 > ppb0 at pci0 dev 28 function 0 "Intel 8 Series PCIE" rev 0xd5: msi > pci1 at ppb0 bus 1 > em0 at pci1 dev 0 function 0 "Intel I210" rev 0x03: msi, address > 54:a0:50:87:61:6d > ppb1 at pci0 dev 28 function 1 "Intel 8 Series PCIE" rev 0xd5: msi > pci2 at ppb1 bus 2 > em1 at pci2 dev 0 function 0 "Intel I210" rev 0x03: msi, address > 54:a0:50:87:61:6e > ppb2 at pci0 dev 28 function 2 "Intel 8 Series PCIE" rev 0xd5: msi > pci3 at ppb2 bus 3 > ppb3 at pci3 dev 0 function 0 "ASPEED Technology AST1150 PCI" rev 0x02 > pci4 at ppb3 bus 4 > vga1 at pci4 dev 0 function 0 "ASPEED Technology AST2000" rev 0x21 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > ehci1 at pci0 dev 29 function 0 "Intel 8 Series USB" rev 0x05: apic 8 int 23 > usb2 at ehci1: USB revision 2.0 > uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 > addr 1 > pcib0 at pci0 dev 31 function 0 "Intel C222 LPC" rev 0x05 > ahci0 at pci0 dev 31 function 2 "Intel 8 Series AHCI" rev 0x05: msi, AHCI 1.3 > ahci0: port 0: 6.0Gb/s > ahci0: port 1: 6.0Gb/s > scsibus1 at ahci0: 32 targets > sd0 at scsibus1 targ 0 lun 0: <ATA, SanDisk SD6SB1M1, X231> SCSI3 0/direct > fixed naa.5001b44cb0e4f2aa > sd0: 122104MB, 512 bytes/sector, 250069680 sectors, thin > sd1 at scsibus1 targ 1 lun 0: <ATA, SanDisk SD6SB1M1, X231> SCSI3 0/direct > fixed naa.5001b44cb0e4f283 > sd1: 122104MB, 512 bytes/sector, 250069680 sectors, thin > ichiic0 at pci0 dev 31 function 3 "Intel 8 Series SMBus" rev 0x05: apic 8 int > 18 > iic0 at ichiic0 > sdtemp0 at iic0 addr 0x19: stts2002 > sdtemp1 at iic0 addr 0x1b: stts2002 > iic0: addr 0x28 00=28 01=19 02=1c 03=02 04=10 05=1a 06=b4 07=54 08=60 09=70 > 0a=11 0b=66 0c=66 0d=44 0e=ff 0f=ff 10=a2 11=22 12=80 13=20 14=11 15=69 16=ff > 17=79 18=65 22=60 23=60 24=3c 25=0c 26=0f 29=5e 2a=d9 2b=21 2c=4b 2d=62 2e=1e > 2f=2e 30=27 31=14 32=90 33=74 34=f4 35=67 36=45 37=0d 38=84 39=fd 3a=80 3d=ff > 40=46 41=40 42=95 48=1c 49=1b 4a=76 4b=40 4c=c0 4e=80 4f=ff 50=ff 52=33 53=88 > 54=44 55=ec 56=c8 57=16 58=22 59=02 5a=24 5b=20 5c=66 5d=21 5e=02 5f=20 60=30 > 61=03 62=42 63=02 64=09 65=96 67=88 68=40 6c=65 6d=fd 6e=06 6f=7d 70=ff 71=20 > 7c=15 7d=15 88=8b 89=89 8a=01 8b=c2 8c=44 8f=1f 91=05 92=43 93=7d 94=65 95=06 > 96=30 97=40 98=28 99=ab 9a=de 9b=c0 9c=05 9d=01 9e=30 9f=25 a3=08 a4=08 a6=08 > a8=08 a9=55 aa=73 ab=5d ac=2b af=18 b6=c0 b7=68 ba=72 bb=71 bc=4b bd=09 c2=02 > c3=7a c4=33 cb=0c cc=03 cd=44 d2=ad d3=50 d4=0c d6=10 d8=3f dc=23 dd=c0 de=f0 > e3=10 e4=01 e5=03 e6=01 e7=88 f5=33 words 00=2828 01=1919 02=1c1c 03=0202 > 04=1010 05=1a1a 06=b4b4 07=5454 > lm1 at iic0 addr 0x2d: W83627DHG > spdmem0 at iic0 addr 0x51: 2GB DDR3 SDRAM ECC PC3-12800 with thermal sensor > spdmem1 at iic0 addr 0x53: 2GB DDR3 SDRAM ECC PC3-12800 with thermal sensor > isa0 at pcib0 > isadma0 at isa0 > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo > pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > pckbd0 at pckbc0 (kbd slot) > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > vmm0 at mainbus0: VMX/EPT > uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" > rev 2.00/0.05 addr 2 > uhub4 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" > rev 2.00/0.05 addr 2 > vscsi0 at root > scsibus2 at vscsi0: 256 targets > softraid0 at root > scsibus3 at softraid0: 256 targets > sd2 at scsibus3 targ 1 lun 0: <OPENBSD, SR RAID 1, 006> SCSI2 0/direct fixed > sd2: 39062MB, 512 bytes/sector, 79999472 sectors > root on sd2a (b8b4dfd776d3a45b.a) swap on sd2b dump on sd2b > ndp info overwritten for 2001:858:6:1900::1 by 00:17:0f:d4:60:00 on vether0 > uhub0: device problem, disabling port 1 > uhub0: device problem, disabling port 10 > uhub0: device problem, disabling port 2 > OpenBSD 6.3 (GENERIC.MP) #1: Sat Apr 21 14:26:25 CEST 2018 > > r...@syspatch-63-amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP > real mem = 4238319616 (4041MB) > avail mem = 4102799360 (3912MB) > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xebb80 (74 entries) > bios0: vendor American Megatrends Inc. version "0801" date 08/20/2014 > bios0: Thomas-Krenn.AG P9D-MV(X) Series > acpi0 at bios0: rev 2 > acpi0: sleep states S0 S3 S4 S5 > acpi0: tables DSDT FACP APIC FPDT SSDT SSDT SSDT SSDT MCFG HPET SSDT SSDT > BERT DMAR EINJ ERST HEST > acpi0: wakeup devices PXSX(S4) RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) > PXSX(S4) PXSX(S4) PXSX(S4) PXSX(S4) PXSX(S4) GLAN(S4) EHC1(S4) EHC2(S4) > XHC_(S4) HDEF(S4) [...] > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel(R) Xeon(R) CPU E3-1230L v3 @ 1.80GHz, 2594.35 MHz > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,IBRS,IBPB,STIBP,SENSOR,ARAT,MELTDOWN > cpu0: 256KB 64b/line 8-way L2 cache > acpitimer0: recalibrated TSC frequency 1795844784 Hz > cpu0: smt 0, core 0, package 0 > mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges > cpu0: apic clock running at 99MHz > cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4, IBE > cpu1 at mainbus0: apid 2 (application processor) > cpu1: Intel(R) Xeon(R) CPU E3-1230L v3 @ 1.80GHz, 2594.01 MHz > cpu1: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,IBRS,IBPB,STIBP,SENSOR,ARAT,MELTDOWN > cpu1: 256KB 64b/line 8-way L2 cache > cpu1: smt 0, core 1, package 0 > cpu2 at mainbus0: apid 4 (application processor) > cpu2: Intel(R) Xeon(R) CPU E3-1230L v3 @ 1.80GHz, 2594.01 MHz > cpu2: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,IBRS,IBPB,STIBP,SENSOR,ARAT,MELTDOWN > cpu2: 256KB 64b/line 8-way L2 cache > cpu2: smt 0, core 2, package 0 > cpu3 at mainbus0: apid 6 (application processor) > cpu3: Intel(R) Xeon(R) CPU E3-1230L v3 @ 1.80GHz, 2594.01 MHz > cpu3: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,IBRS,IBPB,STIBP,SENSOR,ARAT,MELTDOWN > cpu3: 256KB 64b/line 8-way L2 cache > cpu3: smt 0, core 3, package 0 > cpu4 at mainbus0: apid 1 (application processor) > cpu4: Intel(R) Xeon(R) CPU E3-1230L v3 @ 1.80GHz, 2594.00 MHz > cpu4: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,IBRS,IBPB,STIBP,SENSOR,ARAT,MELTDOWN > cpu4: 256KB 64b/line 8-way L2 cache > cpu4: smt 1, core 0, package 0 > cpu5 at mainbus0: apid 3 (application processor) > cpu5: Intel(R) Xeon(R) CPU E3-1230L v3 @ 1.80GHz, 2594.00 MHz > cpu5: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,IBRS,IBPB,STIBP,SENSOR,ARAT,MELTDOWN > cpu5: 256KB 64b/line 8-way L2 cache > cpu5: smt 1, core 1, package 0 > cpu6 at mainbus0: apid 5 (application processor) > cpu6: Intel(R) Xeon(R) CPU E3-1230L v3 @ 1.80GHz, 2594.00 MHz > cpu6: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,IBRS,IBPB,STIBP,SENSOR,ARAT,MELTDOWN > cpu6: 256KB 64b/line 8-way L2 cache > cpu6: smt 1, core 2, package 0 > cpu7 at mainbus0: apid 7 (application processor) > cpu7: Intel(R) Xeon(R) CPU E3-1230L v3 @ 1.80GHz, 2594.00 MHz > cpu7: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,IBRS,IBPB,STIBP,SENSOR,ARAT,MELTDOWN > cpu7: 256KB 64b/line 8-way L2 cache > cpu7: smt 1, core 3, package 0 > ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins > acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255 > acpihpet0 at acpi0: 14318179 Hz > acpihpet0: recalibrated TSC frequency 1795695907 Hz > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus 1 (RP01) > acpiprt2 at acpi0: bus 2 (RP02) > acpiprt3 at acpi0: bus 3 (RP03) > acpiprt4 at acpi0: bus 4 (BR20) > acpiprt5 at acpi0: bus -1 (PEG0) > acpiprt6 at acpi0: bus -1 (PEG1) > acpiprt7 at acpi0: bus -1 (PEG2) > acpiec0 at acpi0: not present > acpicpu0 at acpi0: C2(350@117 mwait.1@0x20), C1(1000@1 mwait.1), PSS > acpicpu1 at acpi0: C2(350@117 mwait.1@0x20), C1(1000@1 mwait.1), PSS > acpicpu2 at acpi0: C2(350@117 mwait.1@0x20), C1(1000@1 mwait.1), PSS > acpicpu3 at acpi0: C2(350@117 mwait.1@0x20), C1(1000@1 mwait.1), PSS > acpicpu4 at acpi0: C2(350@117 mwait.1@0x20), C1(1000@1 mwait.1), PSS > acpicpu5 at acpi0: C2(350@117 mwait.1@0x20), C1(1000@1 mwait.1), PSS > acpicpu6 at acpi0: C2(350@117 mwait.1@0x20), C1(1000@1 mwait.1), PSS > acpicpu7 at acpi0: C2(350@117 mwait.1@0x20), C1(1000@1 mwait.1), PSS > acpipwrres0 at acpi0: FN00, resource for FAN0 > acpipwrres1 at acpi0: FN01, resource for FAN1 > acpipwrres2 at acpi0: FN02, resource for FAN2 > acpipwrres3 at acpi0: FN03, resource for FAN3 > acpipwrres4 at acpi0: FN04, resource for FAN4 > acpitz0 at acpi0: critical temperature is 95 degC > acpitz1 at acpi0: critical temperature is 95 degC > "INT3F0D" at acpi0 not configured > "PNP0A05" at acpi0 not configured > acpibtn0 at acpi0: PWRB > "PNP0C0B" at acpi0 not configured > "PNP0C0B" at acpi0 not configured > "PNP0C0B" at acpi0 not configured > "PNP0C0B" at acpi0 not configured > "PNP0C0B" at acpi0 not configured > acpivideo0 at acpi0: GFX0 > acpivout0 at acpivideo0: DD1F > ipmi at mainbus0 not configured > cpu0: Enhanced SpeedStep 2594 MHz: speeds: 1801, 1800, 1700, 1600, 1500, > 1400, 1300, 1200, 1100, 1000, 900, 800 MHz > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "Intel Xeon E3-1200 v3 Host" rev 0x06 > xhci0 at pci0 dev 20 function 0 "Intel 8 Series xHCI" rev 0x05: msi > usb0 at xhci0: USB revision 3.0 > uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 > addr 1 > ehci0 at pci0 dev 26 function 0 "Intel 8 Series USB" rev 0x05: apic 8 int 20 > usb1 at ehci0: USB revision 2.0 > uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 > addr 1 > ppb0 at pci0 dev 28 function 0 "Intel 8 Series PCIE" rev 0xd5: msi > pci1 at ppb0 bus 1 > em0 at pci1 dev 0 function 0 "Intel I210" rev 0x03: msi, address > 54:a0:50:87:61:6d > ppb1 at pci0 dev 28 function 1 "Intel 8 Series PCIE" rev 0xd5: msi > pci2 at ppb1 bus 2 > em1 at pci2 dev 0 function 0 "Intel I210" rev 0x03: msi, address > 54:a0:50:87:61:6e > ppb2 at pci0 dev 28 function 2 "Intel 8 Series PCIE" rev 0xd5: msi > pci3 at ppb2 bus 3 > ppb3 at pci3 dev 0 function 0 "ASPEED Technology AST1150 PCI" rev 0x02 > pci4 at ppb3 bus 4 > vga1 at pci4 dev 0 function 0 "ASPEED Technology AST2000" rev 0x21 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > ehci1 at pci0 dev 29 function 0 "Intel 8 Series USB" rev 0x05: apic 8 int 23 > usb2 at ehci1: USB revision 2.0 > uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 > addr 1 > pcib0 at pci0 dev 31 function 0 "Intel C222 LPC" rev 0x05 > ahci0 at pci0 dev 31 function 2 "Intel 8 Series AHCI" rev 0x05: msi, AHCI 1.3 > ahci0: port 0: 6.0Gb/s > ahci0: port 1: 6.0Gb/s > scsibus1 at ahci0: 32 targets > sd0 at scsibus1 targ 0 lun 0: <ATA, SanDisk SD6SB1M1, X231> SCSI3 0/direct > fixed naa.5001b44cb0e4f2aa > sd0: 122104MB, 512 bytes/sector, 250069680 sectors, thin > sd1 at scsibus1 targ 1 lun 0: <ATA, SanDisk SD6SB1M1, X231> SCSI3 0/direct > fixed naa.5001b44cb0e4f283 > sd1: 122104MB, 512 bytes/sector, 250069680 sectors, thin > ichiic0 at pci0 dev 31 function 3 "Intel 8 Series SMBus" rev 0x05: apic 8 int > 18 > iic0 at ichiic0 > sdtemp0 at iic0 addr 0x19: stts2002 > sdtemp1 at iic0 addr 0x1b: stts2002 > iic0: addr 0x28 00=28 01=19 02=1c 03=02 04=10 05=1a 06=b4 07=54 08=60 09=70 > 0a=11 0b=66 0c=66 0d=44 0e=ff 0f=ff 10=a2 11=22 12=80 13=20 14=11 15=69 16=ff > 17=79 18=65 22=60 23=60 24=3c 25=0c 26=0f 29=5e 2a=d9 2b=21 2c=4b 2d=62 2e=1e > 2f=2e 30=27 31=14 32=90 33=74 34=f4 35=67 36=45 37=0d 38=84 39=fd 3a=80 3d=ff > 40=46 41=40 42=95 48=1c 49=1b 4a=76 4b=40 4c=c0 4e=80 4f=ff 50=ff 52=33 53=88 > 54=44 55=ec 56=c8 57=16 58=22 59=02 5a=24 5b=20 5c=66 5d=21 5e=02 5f=20 60=30 > 61=03 62=42 63=02 64=09 65=96 67=88 68=40 6c=65 6d=fd 6e=06 6f=7d 70=ff 71=20 > 7c=15 7d=15 88=8b 89=89 8a=01 8b=c2 8c=44 8f=1f 91=05 92=43 93=7d 94=65 95=06 > 96=f0 97=40 98=28 99=ab 9a=de 9b=c0 9c=05 9d=01 9e=35 9f=27 a3=08 a4=08 a6=08 > a8=08 a9=55 aa=73 ab=5d ac=2b af=18 b6=c0 b7=68 ba=72 bb=71 bc=4e bd=09 c2=02 > c3=7a c4=33 cb=0c cc=03 cd=44 d2=ad d3=50 d4=0c d6=10 d8=3f dc=23 dd=c0 de=f0 > e3=10 e4=01 e5=03 e6=01 e7=88 f5=33 words 00=2828 01=1919 02=1c1c 03=0202 > 04=1010 05=1a1a 06=b4b4 07=5454 > lm1 at iic0 addr 0x2d: W83627DHG > spdmem0 at iic0 addr 0x51: 2GB DDR3 SDRAM ECC PC3-12800 with thermal sensor > spdmem1 at iic0 addr 0x53: 2GB DDR3 SDRAM ECC PC3-12800 with thermal sensor > isa0 at pcib0 > isadma0 at isa0 > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo > pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > pckbd0 at pckbc0 (kbd slot) > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > vmm0 at mainbus0: VMX/EPT > uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" > rev 2.00/0.05 addr 2 > uhub4 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" > rev 2.00/0.05 addr 2 > vscsi0 at root > scsibus2 at vscsi0: 256 targets > softraid0 at root > scsibus3 at softraid0: 256 targets > softraid0: sd2 was not shutdown properly > sd2 at scsibus3 targ 1 lun 0: <OPENBSD, SR RAID 1, 006> SCSI2 0/direct fixed > sd2: 39062MB, 512 bytes/sector, 79999472 sectors > root on sd2a (b8b4dfd776d3a45b.a) swap on sd2b dump on sd2b > WARNING: / was not properly unmounted > >
