I forgot to mention that you can disable extended input devices. Ie. $ xinput --list Then look at list of "Virtual core XTEST pointer" children And ``xinput --disable [id]`` everything but the first one. It _may_ help.
On Thu, Apr 19, 2018 at 2:38 PM, Jonathan Thornburg < jth...@astro.indiana.edu> wrote: > I have a Lenovo Thinkpad T530. Everything (including the builtin > touchpad) was fine under 6.2/amd64, but under 6.3/amd64 there is a > severe problem with the builtin touchpad when running X (autoconfigured > with no xorg.conf; all other aspects of X operation are fine). > > The problem is this: when I first start X the touchpad operates normally. > But a minute or so of use the X cursor starts jumping to the left and/or > top side of the screen each time I start a new finger-movement. > > That is, a normal sequence of touchpad operation is > 1. touch finger to touchpad > 2. drag finger to move X cursor to desired location > 3. remove finger from touchpad > but once this problem starts, step 2 causes the X cursor to jump to the > left side of the screen (if the finger-drag is in a horizontal direction), > the top side of the screen (if the finger-drag is in a vertical direction), > or the top-left corner of the screen (if the finger-drag is in a diagonal > direction). > > I see the same symptoms if ... > * ... I boot GENERIC instead of usual GENERIC.MP > * ... I comment out the line 'xset m 1/4' (which is the only 'xset m' line) > from my $HOME/.xinitrc. > * ... I change from my usual window manager (twm, started from > $HOME/.xinitrc), > to the OpenBSD default fvwm (started if there is no $HOME/.xinitrc). > * ... I plug in a USB (optical) mouse, but continue to use the builtin > touchpad, > * ... I plug in a USB (optical) mouse, and use that as a pointer device > instead of the builtin touchpad. In this case mouse movements trigger > the X-cursor-jumping behavior: the X cursor jumps to the left side of > the screen (if the mouse movement is in a horizontal direction), the top > side of the screen (if the mouse movement is in a vertical direction), > or the top-left corner of the screen (if the mouse movement is in a > diagonal direction). > > Once this problem starts, the only "cure" I have found is to kill the > X server (either 'pkill X' or Ctrl-Shift-Backspace -- the window-manager > menu is inaccessable due to the X cursor jumping) and start a new X > session. > This gets me a minute or so of normal operation before the problem > reoccurs. > > I am not running xenodm -- I login on the console and start (or restart) > X via 'startx'. > > Below I give my dmesg (6.3/amd64), a dmesg from 6.2/amd64 on this same > machine for comparison, and /var/log/Xorg.0.log (6.3/amd64). > > Have other Thinkpad users encountered this behavior? Is there a known > workaround? Is there additional information I could supply to help > diagnose the problem? (I could run with a debugging kernel or X server > for a while if that would help.) > > Thanks, ciao, > -- "Jonathan Thornburg [remove -animal to reply]" < > jth...@astro.indiana-zebra.edu> > currently visiting Max-Plack-Institute fuer Gravitationsphysik > (Albert-Einstein-Institut), Potsdam-Golm, Germany > > --- begin 6.3/amd64 /var/run/dmesg.boot --- > OpenBSD 6.3 (GENERIC.MP) #107: Sat Mar 24 14:21:59 MDT 2018 > dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP > real mem = 16845565952 (16065MB) > avail mem = 16327950336 (15571MB) > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xdae9c000 (69 entries) > bios0: vendor LENOVO version "G4ETA7WW (2.67 )" date 08/24/2016 > bios0: LENOVO 24292A9 > acpi0 at bios0: rev 2 > acpi0: sleep states S0 S3 S4 S5 > acpi0: tables DSDT FACP SLIC TCPA SSDT SSDT SSDT HPET APIC MCFG ECDT FPDT > ASF! UEFI UEFI POAT SSDT SSDT UEFI DBG2 > acpi0: wakeup devices LID_(S4) SLPB(S3) IGBE(S4) EXP3(S4) XHCI(S3) > EHC1(S3) EHC2(S3) HDEF(S4) > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpihpet0 at acpi0: 14318179 Hz > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel(R) Core(TM) i7-3520M CPU @ 2.90GHz, 2893.80 MHz > cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA, > CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM, > PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3, > CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE, > AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC, > FSGSBASE,SMEP,ERMS,IBRS,IBPB,STIBP,SENSOR,ARAT,MELTDOWN > cpu0: 256KB 64b/line 8-way L2 cache > acpihpet0: recalibrated TSC frequency 2893437769 Hz > cpu0: smt 0, core 0, package 0 > mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges > cpu0: apic clock running at 99MHz > cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE > cpu1 at mainbus0: apid 2 (application processor) > cpu1: Intel(R) Core(TM) i7-3520M CPU @ 2.90GHz, 2893.43 MHz > cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA, > CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM, > PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3, > CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE, > AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC, > FSGSBASE,SMEP,ERMS,IBRS,IBPB,STIBP,SENSOR,ARAT,MELTDOWN > cpu1: 256KB 64b/line 8-way L2 cache > cpu1: smt 0, core 1, package 0 > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins > acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63 > acpiec0 at acpi0 > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus -1 (PEG_) > acpiprt2 at acpi0: bus 2 (EXP1) > acpiprt3 at acpi0: bus 3 (EXP2) > acpiprt4 at acpi0: bus 4 (EXP3) > acpicpu0 at acpi0: C2(350@80 mwait.1@0x20), C1(1000@1 mwait.1), PSS > acpicpu1 at acpi0: C2(350@80 mwait.1@0x20), C1(1000@1 mwait.1), PSS > acpipwrres0 at acpi0: PUBS, resource for XHCI, EHC1, EHC2 > acpitz0 at acpi0: critical temperature is 103 degC > acpibtn0 at acpi0: LID_ > acpibtn1 at acpi0: SLPB > "LEN0071" at acpi0 not configured > "LEN0015" at acpi0 not configured > acpibat0 at acpi0: BAT0 model "45N1001" serial 1364 type LION oem "SANYO" > acpiac0 at acpi0: AC unit online > "LEN0078" at acpi0 not configured > acpithinkpad0 at acpi0 > "PNP0C14" at acpi0 not configured > "PNP0C14" at acpi0 not configured > "PNP0C14" at acpi0 not configured > acpivideo0 at acpi0: VID_ > acpivout at acpivideo0 not configured > acpivideo1 at acpi0: VID_ > cpu0: Enhanced SpeedStep 2893 MHz: speeds: 2901, 2900, 2800, 2700, 2500, > 2400, 2300, 2200, 2000, 1900, 1800, 1700, 1600, 1400, 1300, 1200 MHz > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "Intel Core 3G Host" rev 0x09 > inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 4000" rev 0x09 > drm0 at inteldrm0 > inteldrm0: msi > inteldrm0: 1920x1080, 32bpp > wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation) > wsdisplay0: screen 1-5 added (std, vt100 emulation) > xhci0 at pci0 dev 20 function 0 "Intel 7 Series xHCI" rev 0x04: msi > usb0 at xhci0: USB revision 3.0 > uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev > 3.00/1.00 addr 1 > "Intel 7 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured > em0 at pci0 dev 25 function 0 "Intel 82579LM" rev 0x04: msi, address > 3c:97:0e:84:e7:c5 > ehci0 at pci0 dev 26 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int > 16 > usb1 at ehci0: USB revision 2.0 > uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev > 2.00/1.00 addr 1 > azalia0 at pci0 dev 27 function 0 "Intel 7 Series HD Audio" rev 0x04: msi > azalia0: codecs: Realtek ALC269 > audio0 at azalia0 > ppb0 at pci0 dev 28 function 0 "Intel 7 Series PCIE" rev 0xc4: msi > pci1 at ppb0 bus 2 > sdhc0 at pci1 dev 0 function 0 "Ricoh 5U823 SD/MMC" rev 0x05: apic 2 int 16 > sdhc0: SDHC 3.0, 50 MHz base clock > sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed, dma > "Ricoh 5U832 Firewire" rev 0x04 at pci1 dev 0 function 3 not configured > ppb1 at pci0 dev 28 function 1 "Intel 7 Series PCIE" rev 0xc4: msi > pci2 at ppb1 bus 3 > iwn0 at pci2 dev 0 function 0 "Intel Centrino Advanced-N 6205" rev 0x34: > msi, MIMO 2T2R, MoW, address 84:3a:4b:56:7a:dc > ppb2 at pci0 dev 28 function 2 "Intel 7 Series PCIE" rev 0xc4: msi > pci3 at ppb2 bus 4 > ehci1 at pci0 dev 29 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int > 23 > usb2 at ehci1: USB revision 2.0 > uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev > 2.00/1.00 addr 1 > pcib0 at pci0 dev 31 function 0 "Intel QM77 LPC" rev 0x04 > ahci0 at pci0 dev 31 function 2 "Intel 7 Series AHCI" rev 0x04: msi, AHCI > 1.3 > ahci0: port 0: 6.0Gb/s > ahci0: port 1: 1.5Gb/s > scsibus1 at ahci0: 32 targets > sd0 at scsibus1 targ 0 lun 0: <ATA, WDC WD10JFCX-68N, 82.0> SCSI3 0/direct > fixed naa.50014ee60759ebae > sd0: 953869MB, 512 bytes/sector, 1953525168 sectors > cd0 at scsibus1 targ 1 lun 0: <HL-DT-ST, DVDRAM GT50N, LT20> ATAPI 5/cdrom > removable > ichiic0 at pci0 dev 31 function 3 "Intel 7 Series SMBus" rev 0x04: apic 2 > int 18 > iic0 at ichiic0 > spdmem0 at iic0 addr 0x50: 8GB DDR3 SDRAM PC3-12800 SO-DIMM > spdmem1 at iic0 addr 0x51: 8GB DDR3 SDRAM PC3-12800 SO-DIMM > isa0 at pcib0 > isadma0 at isa0 > pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > pckbd0 at pckbc0 (kbd slot) > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pms0 at pckbc0 (aux slot) > wsmouse0 at pms0 mux 0 > wsmouse1 at pms0 mux 0 > pms0: Synaptics touchpad, firmware 7.2, 0x1c0b1 0xb40000 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > error: [drm:pid0:cpt_set_fifo_underrun_reporting] *ERROR* uncleared pch > fifo underrun on pch transcoder A > error: [drm:pid0:intel_pch_fifo_underrun_irq_handler] *ERROR* PCH > transcoder A FIFO underrun > uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching > Hub" rev 2.00/0.00 addr 2 > ugen0 at uhub3 port 1 "Lenovo Integrated Smart Card Reader" rev 2.00/1.00 > addr 3 > ugen1 at uhub3 port 3 "Auth Biometric Coprocessor" rev 1.10/0.01 addr 4 > uhub4 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching > Hub" rev 2.00/0.00 addr 2 > vscsi0 at root > scsibus2 at vscsi0: 256 targets > softraid0 at root > scsibus3 at softraid0: 256 targets > sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> SCSI2 0/direct > fixed > sd1: 33282MB, 512 bytes/sector, 68163120 sectors > root on sd1a (d28f88291c1f5b18.a) swap on sd1b dump on sd1b > --- end 6.3/amd64 /var/run/dmesg.boot --- > > --- begin 6.2/amd64 dmesg for comparison --- > OpenBSD 6.2 (GENERIC.MP) #134: Tue Oct 3 21:22:29 MDT 2017 > dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP > real mem = 16845565952 (16065MB) > avail mem = 16328007680 (15571MB) > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xdae9c000 (69 entries) > bios0: vendor LENOVO version "G4ETA7WW (2.67 )" date 08/24/2016 > bios0: LENOVO 24292A9 > acpi0 at bios0: rev 2 > acpi0: sleep states S0 S3 S4 S5 > acpi0: tables DSDT FACP SLIC TCPA SSDT SSDT SSDT HPET APIC MCFG ECDT FPDT > ASF! UEFI UEFI POAT SSDT SSDT UEFI DBG2 > acpi0: wakeup devices LID_(S4) SLPB(S3) IGBE(S4) EXP3(S4) XHCI(S3) > EHC1(S3) EHC2(S3) HDEF(S4) > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpihpet0 at acpi0: 14318179 Hz > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel(R) Core(TM) i7-3520M CPU @ 2.90GHz, 2893.84 MHz > cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA, > CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM, > PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3, > CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE, > AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC, > FSGSBASE,SMEP,ERMS,SENSOR,ARAT > cpu0: 256KB 64b/line 8-way L2 cache > cpu0: TSC frequency 2893841120 Hz > cpu0: smt 0, core 0, package 0 > mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges > cpu0: apic clock running at 99MHz > cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE > cpu1 at mainbus0: apid 2 (application processor) > cpu1: Intel(R) Core(TM) i7-3520M CPU @ 2.90GHz, 2893.43 MHz > cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA, > CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM, > PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3, > CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE, > AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC, > FSGSBASE,SMEP,ERMS,SENSOR,ARAT > cpu1: 256KB 64b/line 8-way L2 cache > cpu1: smt 0, core 1, package 0 > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins > acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63 > acpiec0 at acpi0 > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus -1 (PEG_) > acpiprt2 at acpi0: bus 2 (EXP1) > acpiprt3 at acpi0: bus 3 (EXP2) > acpiprt4 at acpi0: bus 4 (EXP3) > acpicpu0 at acpi0: C2(350@80 mwait.1@0x20), C1(1000@1 mwait.1), PSS > acpicpu1 at acpi0: C2(350@80 mwait.1@0x20), C1(1000@1 mwait.1), PSS > acpipwrres0 at acpi0: PUBS, resource for XHCI, EHC1, EHC2 > acpitz0 at acpi0: critical temperature is 103 degC > acpibtn0 at acpi0: LID_ > acpibtn1 at acpi0: SLPB > "LEN0071" at acpi0 not configured > "LEN0015" at acpi0 not configured > acpibat0 at acpi0: BAT0 model "45N1001" serial 1364 type LION oem "SANYO" > acpiac0 at acpi0: AC unit online > "LEN0078" at acpi0 not configured > acpithinkpad0 at acpi0 > "PNP0C14" at acpi0 not configured > "PNP0C14" at acpi0 not configured > "PNP0C14" at acpi0 not configured > acpivideo0 at acpi0: VID_ > acpivout at acpivideo0 not configured > acpivideo1 at acpi0: VID_ > cpu0: Enhanced SpeedStep 2893 MHz: speeds: 2901, 2900, 2800, 2700, 2500, > 2400, 2300, 2200, 2000, 1900, 1800, 1700, 1600, 1400, 1300, 1200 MHz > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "Intel Core 3G Host" rev 0x09 > inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 4000" rev 0x09 > drm0 at inteldrm0 > inteldrm0: msi > inteldrm0: 1920x1080, 32bpp > wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation) > wsdisplay0: screen 1-5 added (std, vt100 emulation) > xhci0 at pci0 dev 20 function 0 "Intel 7 Series xHCI" rev 0x04: msi > usb0 at xhci0: USB revision 3.0 > uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev > 3.00/1.00 addr 1 > "Intel 7 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured > em0 at pci0 dev 25 function 0 "Intel 82579LM" rev 0x04: msi, address > 3c:97:0e:84:e7:c5 > ehci0 at pci0 dev 26 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int > 16 > usb1 at ehci0: USB revision 2.0 > uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev > 2.00/1.00 addr 1 > azalia0 at pci0 dev 27 function 0 "Intel 7 Series HD Audio" rev 0x04: msi > azalia0: codecs: Realtek ALC269 > audio0 at azalia0 > ppb0 at pci0 dev 28 function 0 "Intel 7 Series PCIE" rev 0xc4: msi > pci1 at ppb0 bus 2 > sdhc0 at pci1 dev 0 function 0 "Ricoh 5U823 SD/MMC" rev 0x05: apic 2 int 16 > sdhc0: SDHC 3.0, 50 MHz base clock > sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed, dma > "Ricoh 5U832 Firewire" rev 0x04 at pci1 dev 0 function 3 not configured > ppb1 at pci0 dev 28 function 1 "Intel 7 Series PCIE" rev 0xc4: msi > pci2 at ppb1 bus 3 > iwn0 at pci2 dev 0 function 0 "Intel Centrino Advanced-N 6205" rev 0x34: > msi, MIMO 2T2R, MoW, address 84:3a:4b:56:7a:dc > ppb2 at pci0 dev 28 function 2 "Intel 7 Series PCIE" rev 0xc4: msi > pci3 at ppb2 bus 4 > ehci1 at pci0 dev 29 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int > 23 > usb2 at ehci1: USB revision 2.0 > uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev > 2.00/1.00 addr 1 > pcib0 at pci0 dev 31 function 0 "Intel QM77 LPC" rev 0x04 > ahci0 at pci0 dev 31 function 2 "Intel 7 Series AHCI" rev 0x04: msi, AHCI > 1.3 > ahci0: port 0: 6.0Gb/s > ahci0: port 1: 1.5Gb/s > scsibus1 at ahci0: 32 targets > sd0 at scsibus1 targ 0 lun 0: <ATA, WDC WD10JFCX-68N, 82.0> SCSI3 0/direct > fixed naa.50014ee60759ebae > sd0: 953869MB, 512 bytes/sector, 1953525168 sectors > cd0 at scsibus1 targ 1 lun 0: <HL-DT-ST, DVDRAM GT50N, LT20> ATAPI 5/cdrom > removable > ichiic0 at pci0 dev 31 function 3 "Intel 7 Series SMBus" rev 0x04: apic 2 > int 18 > iic0 at ichiic0 > spdmem0 at iic0 addr 0x50: 8GB DDR3 SDRAM PC3-12800 SO-DIMM > spdmem1 at iic0 addr 0x51: 8GB DDR3 SDRAM PC3-12800 SO-DIMM > isa0 at pcib0 > isadma0 at isa0 > pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > pckbd0 at pckbc0 (kbd slot) > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pms0 at pckbc0 (aux slot) > wsmouse0 at pms0 mux 0 > wsmouse1 at pms0 mux 0 > pms0: Synaptics touchpad, firmware 7.2, 0x1c0b1 0xb40000 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > error: [drm:pid0:cpt_set_fifo_underrun_reporting] *ERROR* uncleared pch > fifo underrun on pch transcoder A > error: [drm:pid0:intel_pch_fifo_underrun_irq_handler] *ERROR* PCH > transcoder A FIFO underrun > uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching > Hub" rev 2.00/0.00 addr 2 > ugen0 at uhub3 port 1 "Lenovo Integrated Smart Card Reader" rev 2.00/1.00 > addr 3 > ugen1 at uhub3 port 3 "Auth Biometric Coprocessor" rev 1.10/0.01 addr 4 > uhub4 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching > Hub" rev 2.00/0.00 addr 2 > vscsi0 at root > scsibus2 at vscsi0: 256 targets > softraid0 at root > scsibus3 at softraid0: 256 targets > sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> SCSI2 0/direct > fixed > sd1: 33282MB, 512 bytes/sector, 68163120 sectors > root on sd1a (d12ff21f5007980c.a) swap on sd1b dump on sd1b > --- end 6.2/amd64 dmesg for comparison --- > > --- begin /var/log/X/Xorg.0.log --- > [ 3062.068] (WW) checkDevMem: failed to open /dev/xf86 and /dev/mem > (Operation not permitted) > Check that you have set 'machdep.allowaperture=1' > in /etc/sysctl.conf and reboot your machine > refer to xf86(4) for details > [ 3062.068] linear framebuffer access unavailable > [ 3062.090] (--) Using wscons driver on /dev/ttyC4 > [ 3062.105] > X.Org X Server 1.19.6 > Release Date: 2017-12-20 > [ 3062.105] X Protocol Version 11, Revision 0 > [ 3062.105] Build Operating System: OpenBSD 6.3 amd64 > [ 3062.105] Current Operating System: OpenBSD iron.astro.indiana.edu 6.3 > GENERIC.MP#107 amd64 > [ 3062.105] Build Date: 24 March 2018 02:38:24PM > [ 3062.105] > [ 3062.105] Current version of pixman: 0.34.0 > [ 3062.105] Before reporting problems, check http://wiki.x.org > to make sure that you have the latest version. > [ 3062.105] Markers: (--) probed, (**) from config file, (==) default > setting, > (++) from command line, (!!) notice, (II) informational, > (WW) warning, (EE) error, (NI) not implemented, (??) unknown. > [ 3062.105] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Apr 19 > 13:06:56 2018 > [ 3062.105] (==) Using system config directory "/usr/X11R6/share/X11/xorg. > conf.d" > [ 3062.105] (==) No Layout section. Using the first Screen section. > [ 3062.105] (==) No screen section available. Using defaults. > [ 3062.105] (**) |-->Screen "Default Screen Section" (0) > [ 3062.105] (**) | |-->Monitor "<default monitor>" > [ 3062.106] (==) No monitor specified for screen "Default Screen Section". > Using a default monitor configuration. > [ 3062.106] (==) Automatically adding devices > [ 3062.106] (==) Automatically enabling devices > [ 3062.106] (==) Not automatically adding GPU devices > [ 3062.106] (==) Max clients allowed: 256, resource mask: 0x1fffff > [ 3062.106] (==) FontPath set to: > /usr/X11R6/lib/X11/fonts/misc/, > /usr/X11R6/lib/X11/fonts/TTF/, > /usr/X11R6/lib/X11/fonts/OTF/, > /usr/X11R6/lib/X11/fonts/Type1/, > /usr/X11R6/lib/X11/fonts/100dpi/, > /usr/X11R6/lib/X11/fonts/75dpi/ > [ 3062.106] (==) ModulePath set to "/usr/X11R6/lib/modules" > [ 3062.106] (II) The server relies on wscons to provide the list of input > devices. > If no devices become available, reconfigure wscons or disable > AutoAddDevices. > [ 3062.106] (II) Loader magic: 0x198febc42000 > [ 3062.106] (II) Module ABI versions: > [ 3062.106] X.Org ANSI C Emulation: 0.4 > [ 3062.106] X.Org Video Driver: 23.0 > [ 3062.106] X.Org XInput driver : 24.1 > [ 3062.106] X.Org Server Extension : 10.0 > [ 3062.106] (--) PCI:*(0:0:2:0) 8086:0166:17aa:21f5 rev 9, Mem @ > 0xf0000000/4194304, 0xe0000000/268435456, I/O @ 0x00006000/64 > [ 3062.106] (II) LoadModule: "glx" > [ 3062.106] (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so > [ 3062.108] (II) Module glx: vendor="X.Org Foundation" > [ 3062.108] compiled for 1.19.6, module version = 1.0.0 > [ 3062.108] ABI class: X.Org Server Extension, version 10.0 > [ 3062.108] (==) Matched modesetting as autoconfigured driver 0 > [ 3062.108] (==) Assigned the driver to the xf86ConfigLayout > [ 3062.108] (II) LoadModule: "modesetting" > [ 3062.108] (II) Loading /usr/X11R6/lib/modules/ > drivers/modesetting_drv.so > [ 3062.108] (II) Module modesetting: vendor="X.Org Foundation" > [ 3062.108] compiled for 1.19.6, module version = 1.19.6 > [ 3062.108] Module class: X.Org Video Driver > [ 3062.108] ABI class: X.Org Video Driver, version 23.0 > [ 3062.108] (II) modesetting: Driver for Modesetting Kernel Drivers: kms > [ 3062.109] (**) modeset(0): claimed PCI slot 0@0:2:0 > [ 3062.109] (II) modeset(0): using default device > [ 3062.109] (II) modeset(0): Creating default Display subsection in > Screen section > "Default Screen Section" for depth/fbbpp 24/32 > [ 3062.109] (==) modeset(0): Depth 24, (==) framebuffer bpp 32 > [ 3062.109] (==) modeset(0): RGB weight 888 > [ 3062.109] (==) modeset(0): Default visual is TrueColor > [ 3062.109] (II) Loading sub module "glamoregl" > [ 3062.109] (II) LoadModule: "glamoregl" > [ 3062.110] (II) Loading /usr/X11R6/lib/modules/libglamoregl.so > [ 3062.115] (II) Module glamoregl: vendor="X.Org Foundation" > [ 3062.115] compiled for 1.19.6, module version = 1.0.0 > [ 3062.115] ABI class: X.Org ANSI C Emulation, version 0.4 > [ 3062.115] (II) glamor: OpenGL accelerated X.org driver based. > [ 3062.128] (II) glamor: EGL version 1.4 (DRI2): > [ 3062.130] (II) modeset(0): glamor initialized > [ 3062.130] (II) modeset(0): Output LVDS-1 has no monitor section > [ 3062.132] (II) modeset(0): Output VGA-1 has no monitor section > [ 3062.132] (II) modeset(0): EDID for output LVDS-1 > [ 3062.132] (II) modeset(0): Manufacturer: LEN Model: 40b2 Serial#: 0 > [ 3062.132] (II) modeset(0): Year: 2009 Week: 1 > [ 3062.132] (II) modeset(0): EDID Version: 1.3 > [ 3062.132] (II) modeset(0): Digital Display Input > [ 3062.132] (II) modeset(0): Max Image Size [cm]: horiz.: 34 vert.: 19 > [ 3062.132] (II) modeset(0): Gamma: 2.20 > [ 3062.132] (II) modeset(0): DPMS capabilities: StandBy Suspend Off > [ 3062.132] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb > 4:4:4 > [ 3062.132] (II) modeset(0): First detailed timing is preferred mode > [ 3062.132] (II) modeset(0): redX: 0.676 redY: 0.314 greenX: 0.215 > greenY: 0.665 > [ 3062.132] (II) modeset(0): blueX: 0.141 blueY: 0.069 whiteX: 0.313 > whiteY: 0.329 > [ 3062.132] (II) modeset(0): Manufacturer's mask: 0 > [ 3062.132] (II) modeset(0): Supported detailed timing: > [ 3062.132] (II) modeset(0): clock: 139.0 MHz Image Size: 344 x 193 mm > [ 3062.132] (II) modeset(0): h_active: 1920 h_sync: 1980 h_sync_end > 2028 h_blank_end 2050 h_border: 0 > [ 3062.132] (II) modeset(0): v_active: 1080 v_sync: 1090 v_sync_end > 1100 v_blanking: 1130 v_border: 0 > [ 3062.132] (II) modeset(0): Supported detailed timing: > [ 3062.132] (II) modeset(0): clock: 115.8 MHz Image Size: 344 x 193 mm > [ 3062.132] (II) modeset(0): h_active: 1920 h_sync: 1980 h_sync_end > 2028 h_blank_end 2050 h_border: 0 > [ 3062.132] (II) modeset(0): v_active: 1080 v_sync: 1090 v_sync_end > 1100 v_blanking: 1130 v_border: 0 > [ 3062.132] (II) modeset(0): Unknown vendor-specific block f > [ 3062.132] (II) modeset(0): B156HW01 V4 > [ 3062.132] (II) modeset(0): EDID (in hex): > [ 3062.132] (II) modeset(0): 00ffffffffffff0030aeb24000000000 > [ 3062.132] (II) modeset(0): 0113010380221378ea2135ad5037aa24 > [ 3062.132] (II) modeset(0): 11505400000001010101010101010101 > [ 3062.132] (II) modeset(0): 0101010101014c368082703832403c30 > [ 3062.132] (II) modeset(0): aa0058c1100000183f2d808270383240 > [ 3062.132] (II) modeset(0): 3c30aa0058c1100000180000000f00d1 > [ 3062.132] (II) modeset(0): 0932d109281b190006af5634000000fe > [ 3062.132] (II) modeset(0): 004231353648573031205634200a00d6 > [ 3062.132] (II) modeset(0): Printing probed modes for output LVDS-1 > [ 3062.132] (II) modeset(0): Modeline "1920x1080"x60.0 139.00 1920 1980 > 2028 2050 1080 1090 1100 1130 -hsync -vsync (67.8 kHz eP) > [ 3062.132] (II) modeset(0): Modeline "1920x1080"x50.0 115.83 1920 1980 > 2028 2050 1080 1090 1100 1130 -hsync -vsync (56.5 kHz e) > [ 3062.132] (II) modeset(0): Modeline "1400x1050"x60.0 122.00 1400 1488 > 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d) > [ 3062.132] (II) modeset(0): Modeline "1280x1024"x60.0 108.00 1280 1328 > 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz d) > [ 3062.133] (II) modeset(0): Modeline "1280x960"x60.0 108.00 1280 1376 > 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz d) > [ 3062.133] (II) modeset(0): Modeline "1024x768"x120.1 133.47 1024 1100 > 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d) > [ 3062.133] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 > 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d) > [ 3062.133] (II) modeset(0): Modeline "960x720"x120.0 117.00 960 1024 > 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d) > [ 3062.133] (II) modeset(0): Modeline "928x696"x120.1 109.15 928 976 > 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d) > [ 3062.133] (II) modeset(0): Modeline "896x672"x120.0 102.40 896 960 > 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d) > [ 3062.133] (II) modeset(0): Modeline "800x600"x120.0 81.00 800 832 > 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d) > [ 3062.133] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 > 1056 600 601 605 628 +hsync +vsync (37.9 kHz d) > [ 3062.133] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 > 1024 600 601 603 625 +hsync +vsync (35.2 kHz d) > [ 3062.133] (II) modeset(0): Modeline "700x525"x120.0 61.00 700 744 > 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d) > [ 3062.133] (II) modeset(0): Modeline "640x512"x120.0 54.00 640 664 > 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d) > [ 3062.133] (II) modeset(0): Modeline "640x480"x120.0 54.00 640 688 > 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d) > [ 3062.133] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 > 800 480 490 492 525 -hsync -vsync (31.5 kHz d) > [ 3062.133] (II) modeset(0): Modeline "512x384"x120.0 32.50 512 524 > 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d) > [ 3062.133] (II) modeset(0): Modeline "400x300"x120.6 20.00 400 420 > 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d) > [ 3062.133] (II) modeset(0): Modeline "400x300"x112.7 18.00 400 412 > 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d) > [ 3062.133] (II) modeset(0): Modeline "320x240"x120.1 12.59 320 328 > 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d) > [ 3062.135] (II) modeset(0): EDID for output VGA-1 > [ 3062.135] (II) modeset(0): Output LVDS-1 connected > [ 3062.135] (II) modeset(0): Output VGA-1 disconnected > [ 3062.135] (II) modeset(0): Using exact sizes for initial modes > [ 3062.135] (II) modeset(0): Output LVDS-1 using initial mode 1920x1080 > +0+0 > [ 3062.135] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0) > [ 3062.135] (==) modeset(0): DPI set to (96, 96) > [ 3062.135] (II) Loading sub module "fb" > [ 3062.135] (II) LoadModule: "fb" > [ 3062.136] (II) Loading /usr/X11R6/lib/modules/libfb.so > [ 3062.136] (II) Module fb: vendor="X.Org Foundation" > [ 3062.136] compiled for 1.19.6, module version = 1.0.0 > [ 3062.136] ABI class: X.Org ANSI C Emulation, version 0.4 > [ 3062.136] (==) Depth 24 pixmap format is 32 bpp > [ 3062.253] (==) modeset(0): Backing store enabled > [ 3062.253] (==) modeset(0): Silken mouse enabled > [ 3062.253] (II) modeset(0): RandR 1.2 enabled, ignore the following > RandR disabled message. > [ 3062.253] (==) modeset(0): DPMS enabled > [ 3062.253] (WW) modeset(0): DRI2: glamor lacks support for pixmap > import/export > [ 3062.253] (II) modeset(0): [DRI2] Setup complete > [ 3062.253] (II) modeset(0): [DRI2] DRI driver: i965 > [ 3062.253] (II) modeset(0): [DRI2] VDPAU driver: i965 > [ 3062.253] (--) RandR disabled > [ 3062.267] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer > [ 3062.267] (II) AIGLX: enabled GLX_ARB_create_context > [ 3062.267] (II) AIGLX: enabled GLX_ARB_create_context_profile > [ 3062.267] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile > [ 3062.267] (II) AIGLX: enabled GLX_INTEL_swap_event > [ 3062.267] (II) AIGLX: enabled GLX_SGI_swap_control > [ 3062.267] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB > [ 3062.267] (II) AIGLX: enabled GLX_ARB_fbconfig_float > [ 3062.267] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float > [ 3062.267] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer > objects > [ 3062.267] (II) AIGLX: enabled GLX_ARB_create_context_robustness > [ 3062.267] (II) AIGLX: Loaded and initialized i965 > [ 3062.267] (II) GLX: Initialized DRI2 GL provider for screen 0 > [ 3062.270] (II) modeset(0): Damage tracking initialized > [ 3062.270] (II) modeset(0): Setting screen physical size to 508 x 285 > [ 3062.345] (II) config/wscons: checking input device /dev/wskbd > [ 3062.345] (II) wskbd: using layout us > [ 3062.345] (II) LoadModule: "kbd" > [ 3062.346] (II) Loading /usr/X11R6/lib/modules/input/kbd_drv.so > [ 3062.346] (II) Module kbd: vendor="X.Org Foundation" > [ 3062.346] compiled for 1.19.6, module version = 1.9.0 > [ 3062.346] Module class: X.Org XInput Driver > [ 3062.346] ABI class: X.Org XInput driver, version 24.1 > [ 3062.346] (II) Using input driver 'kbd' for '/dev/wskbd' > [ 3062.346] (**) /dev/wskbd: always reports core events > [ 3062.346] (**) /dev/wskbd: always reports core events > [ 3062.346] (**) Option "Protocol" "standard" > [ 3062.346] (**) Option "XkbRules" "base" > [ 3062.346] (**) Option "XkbModel" "pc105" > [ 3062.346] (**) Option "XkbLayout" "us" > [ 3062.346] (II) XINPUT: Adding extended input device "/dev/wskbd" (type: > KEYBOARD, id 6) > [ 3062.812] (II) config/wscons: checking input device /dev/wsmouse0 > [ 3062.812] (II) LoadModule: "ws" > [ 3062.814] (II) Loading /usr/X11R6/lib/modules/input/ws_drv.so > [ 3062.814] (II) Module ws: vendor="X.Org Foundation" > [ 3062.814] compiled for 1.19.6, module version = 1.3.0 > [ 3062.814] Module class: X.Org XInput Driver > [ 3062.815] ABI class: X.Org XInput driver, version 24.1 > [ 3062.815] (II) Using input driver 'ws' for '/dev/wsmouse0' > [ 3062.815] (**) /dev/wsmouse0: always reports core events > [ 3062.815] (II) ws: /dev/wsmouse0: debuglevel 0 > [ 3062.815] (**) Option "Device" "/dev/wsmouse0" > [ 3062.815] (**) ws: /dev/wsmouse0: ZAxisMapping: buttons 4 and 5 > [ 3062.815] (**) ws: /dev/wsmouse0: WAxisMapping: buttons 6 and 7 > [ 3062.815] (**) ws: /dev/wsmouse0: associated screen: 0 > [ 3063.248] (II) ws: /dev/wsmouse0: minimum x position: 0 > [ 3063.248] (II) ws: /dev/wsmouse0: maximum x position: 1919 > [ 3063.248] (II) ws: /dev/wsmouse0: minimum y position: 0 > [ 3063.248] (II) ws: /dev/wsmouse0: maximum y position: 1079 > [ 3063.248] (==) ws: /dev/wsmouse0: Buttons: 7 > [ 3063.281] (**) ws: /dev/wsmouse0: YAxisMapping: buttons 4 and 5 > [ 3063.281] (II) XINPUT: Adding extended input device "/dev/wsmouse0" > (type: MOUSE, id 7) > [ 3063.712] (**) /dev/wsmouse0: (accel) keeping acceleration scheme 1 > [ 3063.712] (**) /dev/wsmouse0: (accel) acceleration profile 0 > [ 3063.712] (**) /dev/wsmouse0: (accel) acceleration factor: 2.000 > [ 3063.712] (**) /dev/wsmouse0: (accel) acceleration threshold: 4 > [ 3063.712] (II) config/wscons: checking input device /dev/wsmouse > [ 3063.712] (II) Using input driver 'ws' for '/dev/wsmouse' > [ 3063.712] (**) /dev/wsmouse: always reports core events > [ 3063.713] (II) ws: /dev/wsmouse: debuglevel 0 > [ 3063.713] (**) Option "Device" "/dev/wsmouse" > [ 3063.713] (**) ws: /dev/wsmouse: ZAxisMapping: buttons 4 and 5 > [ 3063.713] (**) ws: /dev/wsmouse: WAxisMapping: buttons 6 and 7 > [ 3063.713] (**) ws: /dev/wsmouse: associated screen: 0 > [ 3063.713] (II) ws: /dev/wsmouse: minimum x position: 0 > [ 3063.713] (II) ws: /dev/wsmouse: maximum x position: 1919 > [ 3063.713] (II) ws: /dev/wsmouse: minimum y position: 0 > [ 3063.713] (II) ws: /dev/wsmouse: maximum y position: 1079 > [ 3063.713] (==) ws: /dev/wsmouse: Buttons: 7 > [ 3063.713] (**) ws: /dev/wsmouse: YAxisMapping: buttons 4 and 5 > [ 3063.713] (II) XINPUT: Adding extended input device "/dev/wsmouse" > (type: MOUSE, id 8) > [ 3063.713] (**) /dev/wsmouse: (accel) keeping acceleration scheme 1 > [ 3063.713] (**) /dev/wsmouse: (accel) acceleration profile 0 > [ 3063.713] (**) /dev/wsmouse: (accel) acceleration factor: 2.000 > [ 3063.713] (**) /dev/wsmouse: (accel) acceleration threshold: 4 > --- end /var/log/X/Xorg.0.log --- > >
