Hi all,

I recently started to resurrect my old Alpha (Digital PWS 600au).  It
was spewing a garbled mess on serial console, so I had to find a PCI
video card to install in it first.  Then a PS/2 keyboard.  Then it
turned out to have reverted to the PWS 600a (AlphaBIOS, supposed to
run Windows NT).  This was due to a dead battery (no wonder, the
machine was in my storage for ~13 years).  However, with the battery
replaced, it booted fine into the OpenBSD 3.7 install that was still
on there.

Here's the dmesg from the latest snapshot (which is from October)
followed by the dmesg from what was still there:

I'll see if I can bring it into the 6.3 world too...

Paul 'WEiRD' de Weerd

[ using 1133880 bytes of bsd ELF symbol table ]
consinit: not using prom console
Copyright (c) 1982, 1986, 1989, 1991, 1993
        The Regents of the University of California.  All rights reserved.
Copyright (c) 1995-2017 OpenBSD. All rights reserved.  https://www.OpenBSD.org

OpenBSD 6.2-current (GENERIC) #157: Fri Oct 27 14:42:14 MDT 2017
    dera...@alpha.openbsd.org:/usr/src/sys/arch/alpha/compile/GENERIC
Digital Personal WorkStation 600au, 598MHz
8192 byte page size, 1 processor.
real mem = 536870912 (512MB)
rsvd mem = 1941504 (1MB)
avail mem = 515784704 (491MB)
mainbus0 at root
cpu0 at mainbus0: ID 0 (primary), 21164A-0 (unknown minor type 0)
cpu0: architecture extensions: 1<BWX>
cia0 at mainbus0: DECchip 2117x Core Logic Chipset (Pyxis), pass 1
cia0: extended capabilities: 1<BWEN>
cia0: using BWX for PCI config and bus access
cia0: WARNING: Pyxis pass 1 DMA bug; no bets...
pci0 at cia0 bus 0
dc0 at pci0 dev 3 function 0 "DEC 21142/3" rev 0x30: dec 550 irq 0, address 
00:00:f8:76:04:64
nsphy0 at dc0 phy 5: DP83840 10/100 PHY, rev. 1
pciide0 at pci0 dev 4 function 0 "CMD Technology PCI0646" rev 0x01: DMA, 
channel 0 wired to compatibility, channel 1 wired to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TOSHIBA, CD-ROM XM-6102B, 1106> ATAPI 5/cdrom 
removable
cd0(pciide0:0:0): using PIO mode 3, DMA mode 1
pciide0: channel 1 ignored (disabled)
sio0 at pci0 dev 7 function 0 "Intel 82378IB ISA" rev 0x43
qlw0 at pci0 dev 12 function 0 "QLogic ISP1020" rev 0x05: dec 550 irq 8
qlw0: firmware rev 4.66.0, attrs 0x0
qlw0: ignoring premature mbox int
scsibus1 at qlw0: 16 targets, initiator 7
cd1 at scsibus1 targ 3 lun 0: <PLEXTOR, CD-ROM PX-40TS, 1.12> SCSI2 5/cdrom 
removable
sd0 at scsibus1 targ 8 lun 0: <SEAGATE, ST34371W, 0440> SCSI2 0/direct fixed 
serial.SEAGATE_ST34371W_JDD273270M5E3P
sd0: 4148MB, 512 bytes/sector, 8496884 sectors
sd1 at scsibus1 targ 9 lun 0: <IBM, DCAS-34330W, S65A> SCSI2 0/direct fixed 
serial.IBM_DCAS-34330W_F3TD8398_
sd1: 4134MB, 512 bytes/sector, 8467200 sectors
sd2 at scsibus1 targ 10 lun 0: <IBM, DCAS-34330W, S65A> SCSI2 0/direct fixed 
serial.IBM_DCAS-34330W_F3TE2118_
sd2: 4134MB, 512 bytes/sector, 8467200 sectors
ppb0 at pci0 dev 20 function 0 "DEC 21152" rev 0x02
pci1 at ppb0 bus 1
fxp0 at pci1 dev 8 function 0 "Intel 8255x" rev 0x0c, i82550: dec 550 irq 12, 
address 00:02:b3:61:21:e3
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
fxp1 at pci1 dev 9 function 0 "Intel 8255x" rev 0x08, i82559: dec 550 irq 16, 
address 00:02:b3:21:cd:c2
inphy1 at fxp1 phy 1: i82555 10/100 PHY, rev. 4
vga0 at pci1 dev 10 function 0 "Matrox MGA 1064SG 220MHz" rev 0x02
wsdisplay0 at vga0 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
isa0 at sio0
isadma0 at isa0
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x3bc/4 irq 7
mcclock0 at isa0 port 0x70/2: mc146818 or compatible
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (92145ab06ead027c.a) swap on sd0b dump on sd0b
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
stray isa irq 4
stray isa irq 3


Old dmesg:


[ using 463776 bytes of bsd ELF symbol table ]
consinit: not using prom console
Copyright (c) 1982, 1986, 1989, 1991, 1993
        The Regents of the University of California.  All rights reserved.
Copyright (c) 1995-2005 OpenBSD. All rights reserved.  http://www.OpenBSD.org

OpenBSD 3.7-current (GENERIC) #489: Wed May 11 22:28:26 MDT 2005
    dera...@alpha.openbsd.org:/usr/src/sys/arch/alpha/compile/GENERIC
Digital Personal WorkStation 600au, 598MHz
8192 byte page size, 1 processor.
total memory = 536870912 (524288K)
(1941504 reserved for PROM, 534929408 used by OpenBSD)
avail memory = 462487552 (451648K)
using 6529 buffers containing 53485568 bytes (52232K) of memory
mainbus0 (root)
cpu0 at mainbus0: ID 0 (primary), 21164A-0 (unknown minor type 0)
cpu0: Architecture extensions: 1<BWX>
cia0 at mainbus0: DECchip 2117x Core Logic Chipset (Pyxis), pass 1
cia0: extended capabilities: 1<BWEN>
cia0: using BWX for PCI config and bus access
cia0: WARNING: Pyxis pass 1 DMA bug; no bets...
pci0 at cia0 bus 0
dc0 at pci0 dev 3 function 0 "DEC 21142/3" rev 0x30: dec 550 irq 0, address 
00:00:f8:76:04:64
nsphy0 at dc0 phy 5: DP83840 10/100 PHY, rev. 1
pciide0 at pci0 dev 4 function 0 "CMD Technology PCI0646" rev 0x01: DMA, 
channel 0 wired to compatibility, channel 1 wired to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TOSHIBA, CD-ROM XM-6102B, 1106> SCSI0 5/cdrom 
removable
cd0(pciide0:0:0): using PIO mode 3, DMA mode 1
pciide0: channel 1 disabled (no drives)
sio0 at pci0 dev 7 function 0 "Intel 82378IB ISA" rev 0x43
isp0 at pci0 dev 12 function 0 "QLogic ISP1020" rev 0x05: dec 550 irq 8
scsibus1 at isp0: 16 targets
cd1 at scsibus1 targ 3 lun 0: <PLEXTOR, CD-ROM PX-40TS, 1.12> SCSI2 5/cdrom 
removable
sd0 at scsibus1 targ 8 lun 0: <SEAGATE, ST34371W, 0440> SCSI2 0/direct fixed
sd0: 4148MB, 5172 cyl, 10 head, 164 sec, 512 bytes/sec, 8496884 sec total
sd1 at scsibus1 targ 9 lun 0: <IBM, DCAS-34330W, S65A> SCSI2 0/direct fixed
sd1: 4134MB, 8205 cyl, 6 head, 171 sec, 512 bytes/sec, 8467200 sec total
sd2 at scsibus1 targ 10 lun 0: <IBM, DCAS-34330W, S65A> SCSI2 0/direct fixed
sd2: 4134MB, 8205 cyl, 6 head, 171 sec, 512 bytes/sec, 8467200 sec total
ppb0 at pci0 dev 20 function 0 "DEC 21152 PCI-PCI" rev 0x02
pci1 at ppb0 bus 1
fxp0 at pci1 dev 8 function 0 "Intel 82557" rev 0x0c, i82550: dec 550 irq 12, 
address 00:02:b3:61:21:e3
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
fxp1 at pci1 dev 9 function 0 "Intel 82557" rev 0x08, i82559: dec 550 irq 16, 
address 00:02:b3:21:cd:c2
inphy1 at fxp1 phy 1: i82555 10/100 PHY, rev. 4
vga0 at pci1 dev 10 function 0 "Matrox MGA 1064SG 220MHz" rev 0x02
wsdisplay0 at vga0: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
isa0 at sio0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 (mux 1 ignored for console): console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
isabeep0 at pcppi0
lpt0 at isa0 port 0x3bc/4 irq 7
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
mcclock0 at isa0 port 0x70/2: mc146818 or compatible
stray isa irq 3
stray isa irq 4
root on sd0a swap on sd0b
rootdev=0x800 rrootdev=0x800 rawdev=0x802
WARNING: preposterous clock chip time
 -- CHECK AND RESET THE DATE!
stray isa irq 4
stray isa irq 3

-- 
>++++++++[<++++++++++>-]<+++++++.>+++[<------>-]<.>+++[<+
+++++++++++>-]<.>++[<------------>-]<+.--------------.[-]
                 http://www.weirdnet.nl/                 

Reply via email to