Srebrenko Sehic wrote:
Again, some bad news. This time, bge(4) is acting up. It seems like
BCM5780 is not configured properly resulting in "bge0: watchdog
timeout -- resetting" kernel messages even with light network
activity. Forcing media settings helps a bit; performance drops to
around 200kb/sec and you simply delay "watchdog timeout".
Not anymore. All was corrected today and I can now saturate my switch
bug time! I even need to put my hands on a Gb switch to actually test
with higher speed as the switch is the bottleneck at the moment. Same
for the watchdog as well, all solved.
We're looking into fixing this issue. I just wanted to give you heads
up if you're looking for IBM hardware to buy/run.
I would say that for having both HP DL145 G2 and IBM e326m now in the
lab and testing both, I would actually go for the IBM. Better chip set
and much better performance all around including drive access, (except
the second SATA controller for now) etc. Even the support from OpenBSD
for my Quad ports Intel PRO/1000MT is working well in the IBM oppose to
inside the HP 145 G2 where I still can't get all 4 ports up, only the
first two, interrupts assignment conflicts, other then that it all
working without issues so far in testing.
As always, more details are available at http://www.armorlogic.com/oscl/
dmesg for IBM e326m:
New dmesg for IBM e326m. As long as you are welling to run the latest
current, you will get good stuff out of it!
All credit goes to Brad as usual, he did an awesome job on this today as
always!!! A real pleasure to do tests for him! The results are always
better then expected!
You got to love OpenBSD, and if you don't, I don't know what's your
smoking.... (;>
Daniel
==========================
OpenBSD 3.9-beta (GENERIC.MP) #2: Wed Feb 1 01:23:46 EST 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 1072672768 (1047532K)
avail mem = 907960320 (886680K)
using 22937 buffers containing 107474944 bytes (104956K) of memory
mainbus0 (root)
ipmi0 at mainbus0: version 1.5 interface KCS iobase 0xca2/2 spacing 1
mainbus0: Intel MP Specification (Version 1.4) (AMD HAMMER )
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Dual Core AMD Opteron(tm) Processor 280, 2394.32 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB
64b/line 16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: apic clock running at 199MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Dual Core AMD Opteron(tm) Processor 280, 2394.00 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB
64b/line 16-way L2 cache
cpu1: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu1: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
mpbios: bus 0 is type PCI
mpbios: bus 1 is type PCI
mpbios: bus 2 is type PCI
mpbios: bus 3 is type PCI
mpbios: bus 4 is type PCI
mpbios: bus 5 is type PCI
mpbios: bus 6 is type PCI
mpbios: bus 7 is type PCI
mpbios: bus 8 is type PCI
mpbios: bus 9 is type PCI
mpbios: bus 10 is type ISA
ioapic0 at mainbus0 apid 4: pa 0xffff800001ba0e24, version 11, 16 pins
ioapic1 at mainbus0 apid 5: pa 0xffff800001ba0d24, version 11, 16 pins
ioapic2 at mainbus0 apid 6: pa 0xffff800001ba0c24, version 11, 16 pins
pci0 at mainbus0 bus 0: configuration mode 1
ppb0 at pci0 dev 1 function 0 "ServerWorks HT-1000 PCI" rev 0x00
pci1 at ppb0 bus 1
ppb1 at pci1 dev 13 function 0 "ServerWorks HT-1000 PCIX" rev 0xb2
pci2 at ppb1 bus 2
pciide0 at pci1 dev 14 function 0 "ServerWorks HT-1000 SATA" rev 0x00: DMA
pciide0: using apic 4 int 11 (irq 11) for native-PCI interrupt
pciide0: port 0: SStatus=0x00000113, SControl=0x00000113
pciide0: port 0: scnt=0x1 sn=0x1 cl=0x0 ch=0x0
pciide0: port 0: device present, speed: 1.5Gb/s
wd0 at pciide0 channel 0 drive 0: <WDC WD800JD-23LSA0>
wd0: 16-sector PIO, LBA48, 76324MB, 156312576 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
pciide0: port 1: SStatus=0x00000004, SControl=0x00000004
pciide0: port 1: PHY offline
pciide0: port 2: SStatus=0x00000004, SControl=0x00000004
pciide0: port 2: PHY offline
pciide0: port 3: SStatus=0x00000004, SControl=0x00000004
pciide0: port 3: PHY offline
pciide1 at pci1 dev 14 function 1 "ServerWorks HT-1000 SATA" rev 0x00:
unable to map BA5 register space
pchb0 at pci0 dev 2 function 0 "ServerWorks HT-1000" rev 0x00
pciide2 at pci0 dev 2 function 1 "ServerWorks HT-1000 IDE" rev 0x00: DMA
atapiscsi0 at pciide2 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, CD-ROM GCR-8240N, 1.06> SCSI0
5/cdrom removable
cd0(pciide2:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 0
pcib0 at pci0 dev 2 function 2 "ServerWorks HT-1000 LPC" rev 0x00
ohci0 at pci0 dev 3 function 0 "ServerWorks HT-1000 USB" rev 0x01: apic
4 int 10 (irq 10), version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: ServerWorks OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ohci1 at pci0 dev 3 function 1 "ServerWorks HT-1000 USB" rev 0x01: apic
4 int 10 (irq 10), version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: ServerWorks OHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 3 function 2 "ServerWorks HT-1000 USB" rev 0x01: apic
4 int 10 (irq 10)
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: ServerWorks EHCI root hub, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
vga1 at pci0 dev 4 function 0 "ATI ES1000" rev 0x01
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb2 at pci0 dev 6 function 0 "ServerWorks HT-2000 PCIE" rev 0xa3
pci3 at ppb2 bus 3
ppb3 at pci3 dev 2 function 0 "IBM PCIX-PCIX" rev 0x02
pci4 at ppb3 bus 4
em0 at pci4 dev 4 function 0 "Intel PRO/1000MT QP (82546EB)" rev 0x01:
apic 5 int 6 (irq 7), address 00:04:23:09:08:18
em1 at pci4 dev 4 function 1 "Intel PRO/1000MT QP (82546EB)" rev 0x01:
apic 5 int 7 (irq 12), address 00:04:23:09:08:19
em2 at pci4 dev 6 function 0 "Intel PRO/1000MT QP (82546EB)" rev 0x01:
apic 5 int 8 (irq 10), address 00:04:23:09:08:1a
em3 at pci4 dev 6 function 1 "Intel PRO/1000MT QP (82546EB)" rev 0x01:
apic 5 int 9 (irq 11), address 00:04:23:09:08:1b
ppb4 at pci0 dev 7 function 0 "ServerWorks HT-2000 PCIE" rev 0xa3
pci5 at ppb4 bus 5
bge0 at pci5 dev 4 function 0 "Broadcom BCM5780" rev 0x03, unknown
BCM5780 (0x8003): apic 5 int 10 (irq 12), address 00:11:25:c4:0e:e4
brgphy0 at bge0 phy 1: BCM5780 10/100/1000baseT PHY, rev. 0
bge1 at pci5 dev 4 function 1 "Broadcom BCM5780" rev 0x03, unknown
BCM5780 (0x8003): apic 5 int 11 (irq 10), address 00:11:25:c4:0e:e5
brgphy1 at bge1 phy 1: BCM5780 10/100/1000baseT PHY, rev. 0
ppb5 at pci0 dev 8 function 0 "ServerWorks HT-2000 PCIE" rev 0xa3
pci6 at ppb5 bus 6
ppb6 at pci0 dev 9 function 0 "ServerWorks HT-2000 PCIE" rev 0xa3
pci7 at ppb6 bus 7
ppb7 at pci0 dev 10 function 0 "ServerWorks HT-2000 PCIE" rev 0xa3
pci8 at ppb7 bus 8
ppb8 at pci0 dev 11 function 0 "ServerWorks HT-2000 PCIE" rev 0xa3
pci9 at ppb8 bus 9
pchb1 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb2 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb4 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
sysbeep0 at pcppi0
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
