Hi Damien,
With your latest changes to iwi, the driver is working as well as the
one in 3.8.
The only issue is: my card does not work reliably. After a reboot the
card works for a while. During that time ifconfig iwi0 looks like this:
iwi0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr <removed>
groups: egress
media: IEEE802.11 autoselect (DS11)
status: active
ieee80211: nwid my_ap chan 1 bssid <removed> nwkey <not displayed>
100dBm
inet 192.168.0.7 netmask 0xffffff00 broadcast 192.168.0.255
inet6 fe80::213:<removed>%iwi0 prefixlen 64 scopeid 0x2
But eventually (some times it takes hours) the card loses the
connection. At this stage I cannot ping the base, then when I
re-init the card it does not see the network.
% ping -i 20 192.168.0.1
PING 192.168.0.1 (192.168.0.1): 56 data bytes
--- 192.168.0.1 ping statistics ---
1 packets transmitted, 0 packets received, 100.0% packet loss
% ifconfig iwi0
iwi0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr <removed>
groups: egress
media: IEEE802.11 autoselect (DS11)
status: active
ieee80211: nwid my_ap chan 1 bssid <removed> nwkey <not displayed>
100dBm
inet 192.168.0.7 netmask 0xffffff00 broadcast 192.168.0.255
inet6 fe80::213:<removed>%iwi0 prefixlen 64 scopeid 0x2
% ping -i 20 192.168.0.1
PING 192.168.0.1 (192.168.0.1): 56 data bytes
ping: sendto: Host is down
ping: wrote 192.168.0.1 64 chars, ret=-1
--- 192.168.0.1 ping statistics ---
1 packets transmitted, 0 packets received, 100.0% packet loss
% sudo ifconfig iwi0 down
% sudo sh /etc/netstart wi0
% ping -i 20 192.168.0.1
PING 192.168.0.1 (192.168.0.1): 56 data bytes
ping: sendto: Network is down
ping: wrote 192.168.0.1 64 chars, ret=-1
--- 192.168.0.1 ping statistics ---
1 packets transmitted, 0 packets received, 100.0% packet loss
% ifconfig iwi0
iwi0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
lladdr <removed>
groups: egress
media: IEEE802.11 autoselect
status: no network
ieee80211: nwid my_ap nwkey <not displayed> 100dBm
inet 192.168.0.7 netmask 0xffffff00 broadcast 192.168.0.255
inet6 fe80::213:<removed>%iwi0 prefixlen 64 scopeid 0x2
Bringing ifconfig iwi0 down or rerunning netstart does not
help. Suspending the system does not help. The only thing that does help
is a reboot.
Just for completeness sake, below is the dmesg from the kernel I built
from last night CVS.
Thanks
Greg
OpenBSD 3.9-beta (comp) #7: Mon Jan 30 20:49:00 PST 2006
[EMAIL PROTECTED]:/home/greg/comp
cpu0: Intel(R) Pentium(R) M processor 2.13GHz ("GenuineIntel" 686-class) 798 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF,EST,TM2
cpu0: Enhanced SpeedStep 600 MHz (988 mV): unknown EST cpu, no changes possible
real mem = 1072144384 (1047016K)
avail mem = 971591680 (948820K)
using 4278 buffers containing 53710848 bytes (52452K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(c8) BIOS, date 07/20/05, BIOS32 rev. 0 @ 0xfd760
apm0 at bios0: Power Management spec V1.2
apm0: battery life expectancy 11%
apm0: AC off, battery charge high, estimated 0:16 hours
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xfd6f0/0x910
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdeb0/256 (14 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #5 is the last bus
bios0: ROM list: 0xc0000/0x10000 0xd0000/0x1600 0xd1800/0x1000 0xdc000/0x4000!
0xe0000/0x10000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82915GM/PM/GMS Host" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82915PM/GM PCIE" rev 0x03
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 vendor "ATI", unknown product 0x3154 rev 0x80
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb1 at pci0 dev 28 function 0 "Intel 82801FB PCIE" rev 0x03
pci2 at ppb1 bus 2
bge0 at pci2 dev 0 function 0 "Broadcom BCM5751M" rev 0x11, BCM5750 B1
(0x4101): irq 11, address <removed>
brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb2 at pci0 dev 28 function 2 "Intel 82801FB PCIE" rev 0x03
pci3 at ppb2 bus 3
uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x03: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x03: irq 11
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x03: irq 11
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x03: irq 11
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x03: irq 11
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xd3
pci4 at ppb3 bus 4
cbb0 at pci4 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0x8d: irq 11
iwi0 at pci4 dev 2 function 0 "Intel PRO/Wireless 2915ABG" rev 0x05: irq 11,
address <removed>
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 5 device 0 cacheline 0x0, lattimer 0xb0
pcmcia0 at cardslot0
auich0 at pci0 dev 30 function 2 "Intel 82801FB AC97" rev 0x03: irq 11, ICH6
AC97
ac97: codec id 0x41445374 (Analog Devices AD1981B)
ac97: codec features headphone, 20 bit DAC, No 3D Stereo
audio0 at auich0
"Intel 82801FB Modem" rev 0x03 at pci0 dev 30 function 3 not configured
ichpcib0 at pci0 dev 31 function 0 "Intel 82801FBM LPC" rev 0x03: PM disabled
pciide0 at pci0 dev 31 function 2 "Intel 82801FBM SATA" rev 0x03: DMA, channel
0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <HTS726060M9AT00>
wd0: 16-sector PIO, LBA, 57231MB, 117210240 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, UJDA765 DVD/CDRW, 1.02> SCSI0 5/cdrom
removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
ichiic0 at pci0 dev 31 function 3 "Intel 82801FB SMBus" rev 0x03: irq 11
iic0 at ichiic0
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
sysbeep0 at pcppi0
lpt2 at isa0 port 0x3bc/4: polled
aps0 at isa0 port 0x1600/31
npx0 at isa0 port 0xf0/16: using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask effd netmask effd ttymask ffff
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
